RESUMO
RESUMEN: En salmonicultura se utilizan imágenes de rayos X, para evaluar la columna vertebral y las aletas, pero estas no permiten cuantificar los minerales que constituyen el hueso, para esto se utilizan otras técnicas que son destructivas. La Microscopía Electrónica de Barrido de presión variable (VP SEM) acoplada al detector espectroscopia de rayos X de energía dispersiva (EDX) acoplado, nos permite analizar la microestructura y a la vez determinar elementos químicos, porcentaje y distribución presentes en puntos específicos en una muestra. Se utilizaron 5 truchas control y 5 con deformidad mandibular, de agua dulce en etapa de smolt, se analizó la estructura y mineralización del hueso, se eligieron en promedio 6 puntos de cuantificación por región de interés y se analizaron mediante Microscopía Electrónica de Barrido (VP SEM-EDX). Los datos obtenidos muestran porcentaje en masa de Ca promedio en hueso articular de truchas fueron de 8.07 % y de 14.48 % en truchas con deformidad mandibular y control respectivamente y el porcentaje en masa promedio de P es de 4.07 % y 7.60 %, en truchas con deformidad mandibular y control respectivamente. Se identificó además otros elementos presentes en la muestra como Mg, Na, C, O, N, S, F, Zn, Al y Fe, con especial interés en el aumento de carbono en las muestras analizadas con deformidad mandibular y la presencia de aluminio en todas las muestras. La Técnica de VP SEM-EDX, permite evaluar de forma directa, sin destrucción de la muestra y con una preparación mínima de la muestra. En el hueso, la aplicación más frecuente de SEM-EDX es la medición del contenido de Ca y P y la relación que existe entre estos elementos Ca/P, en la muestra. Paralelamente la técnica nos permite la detección de otros microelementos provenientes del agua o de la alimentación y que eventualmente pueden provocar alteraciones en los peces, confirmando la hipótesis que el microanálisis elemental tiene utilidad para la salmonicultura.
SUMMARY: In salmon farming systems, X-ray images are used to evaluate the spine and fins, but these do not allow quantifying the minerals that make up the bone, for different techniques that are destructive are used. Variable Pressure Scanning Electron Microscopy (VP SEM) coupled to an Energy Dispersive X-ray spectroscopy detector (EDX), allows us to analyze the microstructure and at the same time determine chemical elements, percentages, and distribution present at specific points in a sample. Five control and five jaw deformity trout, from freshwater and in the smolt stage were used. The structure and mineralization of the bone were analyzed, an average six quantification points were chosen per region of interest (ROI) and then they were analyzed by Scanning Electron Microscopy (VP SEM-EDX). The data obtained have shown the average mass percentage of calcium in trout joint bone was 8.07 % and 14.48 % in jaw deformity and control trout, respectively; and the average mass percentage of phosphorus is 4.07 % and 7.60 %, in jaw deformity and control trout, respectively. Other elements present in the sample were also identified, such as magnesium, sodium, carbon, oxygen, nitrogen, sulphur, fluorine, zinc, aluminium, and iron, with special interest the increase of carbon in the analyzed samples with mandibular deformity and the presence of aluminum in all samples. The VP SEM-EDX Technique allows direct evaluation, without destruction of the sample and with minimal sample preparation. In bone, the most frequent application of SEM-EDX is the measurement of the content of calcium (Ca) and phosphorus (P) and the relationship that exists between these elements, calcium/phosphorus (Ca/P), in the sample. At the same time, the technique allows us to detect other microelements from water or food that can eventually cause alterations in fish, confirming the hypothesis that elemental microanalysis is useful for salmon farming.
Assuntos
Animais , Dente/química , Oncorhynchus mykiss , Mandíbula/química , Minerais/análise , Espectrometria por Raios X , Dente/ultraestrutura , Microscopia Eletrônica de Varredura , Mandíbula/ultraestruturaRESUMO
PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.
Assuntos
Acetona , Cerâmica , Etanol , Análise Espectral , Vapor , UltrassomRESUMO
PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.