Analysis and 3D Imaging of Morphometric - Mineral Structure Changes in Skulls of Male and Female Guinea Pigs During and After Developmental Period

SUMMARY: Even though morphometric and mineral studies related to the guinea pig (Cavia porcellus) skull have been carried out, this study is the first attempt to evaluate all developmental stages of male and female guinea pigs. This study aims to this study is to create 3D modeling of CT images obtained from the skulls of male and female guinea pigs during the developmental period (prepuberty and the period between puberty and adulthood) and following periods (young adulthood and old adulthood), to analyze some biometric bone data such as volume, surface area and length, and to assess the developmental analysis of the mineral matter change in their skulls. The CT-scanned skulls were transferred to 3D Slicer (5.0.2), which is used for 3D modeling. The surface area and volume were calculated by measuring the measurement points on the models. In addition, the XRF device was used to show elemental ratio changes during different developmental stages. According to metric measurements, a gradual increase was observed during the life period. The metric measurements of the skull bone had a higher measurement value in male guinea pigs than in their female counterparts. While Ca/P ratio increased up to the third group and partially decreased in the fourth group in males, it gradually increased from the first group to the fourth group in females. This study revealed that puberty, adulthood and sex were effective in the physical and chemical characterization of skull bone structure in guinea pigs.

Aunque se han realizado estudios morfométricos y de minerales relacionados con el cráneo del cobayo (Cavia porcellus), esta investigación es el primer intento de evaluar las etapas de desarrollo de cobayos machos y hembras. El objetivo de este estudio fue crear un modelado 3D de imágenes de tomografía computarizada obtenidas de los cráneos de cobayos machos y hembras durante el período de desarrollo (prepubertad y el período entre la pubertad y la edad adulta) y los períodos siguientes (edad adulta joven y edad adulta mayor), para analizar algunos datos biométricos de los huesos, como el volumen, la superficie y la longitud, y además, analizar el cambio de materia mineral en sus cráneos durante el desarrollo. Los cráneos escaneados se transfirieron a 3D Slicer (5.0.2), que se utiliza para el modelado 3D. El área de superficie y el volumen se calcularon midiendo los puntos de medición en los modelos. Además, se utilizó el dispositivo XRF para mostrar los cambios en las proporciones elementales durante diferentes etapas de desarrollo. Según mediciones métricas, se observó un aumento gradual durante el período de vida. Las medidas métricas del hueso del cráneo tuvieron un valor de medición más alto en los cobayos machos que en las hembras. Mientras que la relación Ca/P aumentó hasta el tercer grupo y disminuyó parcialmente en el cuarto grupo en los machos y aumentó gradualmente del primer grupo al cuarto grupo en las hembras. Este estudio reveló que la pubertad, la edad adulta y el sexo fueron efectivos en la caracterización física y química de la estructura ósea del cráneo en cobayos.

Preparation and Physicochemical Characterisation of Suryaprabha Gulika

Suryaprabha gulika is a Kharaleeya preparation mentioned in the Gulika prakarana of Sahasrayogam indicated for Sula, Swasa, Kasa and Mahajwara. It contains eleven ingredients namely Suddha Parada, Suddha Gandhaka, Suddha Hingu, Amalaki, Harithaki, Vibheethaki, Sunti, Pippali, Maricha, Yavani and Suddha Vatsanabha triturated for 6 hours in Jambeera swarasa. In this paper, the work done on pharmaceutical and analytical aspects of Suryaprabha gulika is detailed. Pharmaceutical study included Sodhana of Parada, Sodhana of Gandhaka, preparation of Kajjali, Sodhana of Hingu, Sodhana of Vatsanabha and the preparation of final product whereas the analytical study included evaluation of organoleptic characters, physico chemical parameters and analysis based on modern instrumentation techniques such as X-ray Fluorescence (XRF), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and particle size analysis.

Content and distribution of inorganic elements in Laminaria japonica based on ICP-MS and Micro-XRF / 中国中药杂志

In order to evaluate the composition and distribution characteristics of inorganic elements in Laminaria japonica, this study employed inductively coupled plasma mass spectrometry(ICP-MS) to detect the inorganic elements and used high performance liquid chromatography tandem ICP-MS(HPLC-ICP-MS) to determine the content of different arsenic species in L. japonica from diffe-rent origins. Micro X-ray fluorescence(Micro-XRF) was used to determine micro-area distribution of inorganic elements in L. japonica. The results showed that the average content of Mn, Fe, Sr, and Al was high, and that of As and Cr exceeded the limits of the national food safety standard. According to the results of HPLC-ICP-MS, arsenobetaine(AsB) was the main species of As contained in L. japonica. The more toxic inorganic arsenic accounts for a small proportion, whereas its content was 1-4 times of the limit in the national food safety standard. The results of Micro-XRF showed that As, Pb, Fe, Cu, Mn, and Ni were mainly distributed on the surface of L. japonica. Among them, As and Pb had a clear tendency to diffuse from the surface to the inside. The results of the study can provide a basis for the processing as well as the medicinal and edible safety evaluation of L. japonica.

Characterization of Polyphenols and Mineral Contents in Three Medicinal Weeds

Aims: Common weeds Rorippa palustris (L.) Besser, Euphorbia rothiana Spreng. and Schoenoplectiella articulata (L.) Lye are used for food, medicinal, green biofertilizer and biosorbent applications. In this work, their polyphenol and mineral contents have been characterized. Methodology: Samples from aforementioned three plants were manually collected in Raipur city (CG, India) and processed for the analyses. Folin-Ciocalteu and aluminum chloride were used for the spectrophotometric determination of polyphenols. The mineral contents were quantified by X-ray fluorescence. Results: The total concentration of 20 elements (viz. P, S, Cl, As, Se, K, Rb, Mg, Ca, Sr, Ba, Al, Ti, Cr, Mn, Fe, Co, Zn, Mo and Pb), total polyphenol and flavonoid contents in the leaves ranged from 46372 to 71501, from 47877 to 73791 and from 1950 to 9400 mg/kg, respectively. Remarkable concentrations of several nutrients (P, S, Cl, K, Mg, Ca and Fe) were observed. Conclusion: The biomass from medicinal weeds R. palustris, E. rothiana and S. articulata featured very high K, Ca and Fe contents. Other nutrients (polyphenols, flavonoids, P, S, Cl and Mg) were identified at moderate levels. These species may hold promise as bioindicators.

Evaluation of the Phytochemical and Mineral Characteristics of Some Selected Sapotaceae Plants

Aims: To study the spectral and thermal characteristics, and the oil, starch, polyphenol and mineral contents of seeds and leaves from three Sapotaceae species, provided that trees and shrubs of this family are an important source of nutritional and functional products. Methodology: Leaves and seeds from three Sapotaceae plants, namely Moa tree (Madhuca indica J. F. Gmel.), Chico sapote (Manilkara zapota (Linn.) van Royen) and Spanish cherry (Mimusops elengi Linn.), were collected in the Raipur area of Chhattisgarh, India. Their physicochemical characterization (including oil, polyphenol, starch and mineral contents; functional groups; and thermal degradation patterns) was carried out by using various techniques, viz. solvent extraction, spectrophotometry, enzymatic digestion, X-ray fluorescence (XRF) and Fourier-transform infrared (FTIR) spectroscopies, thermogravimetric/derivative thermogravimetric (TG/DTG) and differential scanning calorimetry (DSC), respectively. Results: The three Sapotaceae seeds under study were found to contain polyphenol, mineral, starch and oil contents in the 1850–23180 mg/kg, 11390–19385 mg/kg, 6.7–9.1% and 9.8-54.1% range, respectively. Their leaves and seed coats featured total phenolic contents in the 24260–28600 mg/kg and 7810–23060 mg/kg range, respectively, and mineral contents in the 8823–27462 mg/kg and 3619–15884 mg/kg range, respectively. The functional groups of the phytochemicals, studied by FTIR, were assigned. Their thermal decomposition patterns, which involved loss of water and volatile organic compounds, proteins, oil and starch/cellulose, were also described. Conclusion: The Sapotaceae leaves, seed coat, kernel and cake are enriched with very high contents of starch, proteins, polyphenols and minerals, suggesting their possible valorization in human food, animal feeding and as herbal medicines.

Nutritional and Spectral Characteristics of Terminalia Plants

Aims: Terminalia spp. is medicinal plants that belong to Combretaceae family, widely used in traditional Ayurvedic medicine. In this work, the nutritional constituents of the leaves, seed kernel and seed coat from four Terminalia species (T. arjuna, T. bellirica, T. catappa and T. chebula) are reported. Methodology: Polyphenol and flavonoid contents were analyzed spectrophotometrically by using Folin-Ciocalteu and aluminum chloride as reagents, respectively; mineral contents were quantified by using X-ray fluorescence; and the functional groups of the phytochemicals were investigated by infrared spectroscopy. Results: The total concentration of 20 macro- and micronutrients and heavy metals (viz. P, S, Cl, K, Rb, Mg, Ca, Sr, Ba, Al, Ti, Cr, Mn, Fe, Co, Cu, Zn, Mo, As and Pb), and the total polyphenol and flavonoid contents in the seed kernels ranged from 1754 to 65521 mg/kg, from 2150 to 51100 mg/kg and from 63 to 42300 mg/kg, respectively. Polyphenol and mineral contents for the Terminalia spp. seed coats and leaves were also determined. The enrichment in each of aforementioned elements with respect to the soil content was calculated. The vibrational spectra of the leaves and seed coats agreed with a composition rich in lignin, hemicellulose, cutin, pectin and flavonoids, while those of the seed kernels were in accordance with the presence of unsaturated oils, protein, and fiber. Conclusion: Various parts of the four Terminalia species under study (T. arjuna, T. bellirica, T. catappa and T. chebula) featured high contents of nutrients and polyphenols needed for biological metabolism and human health. In addition, heavy metals were only present at traces level, indicating that these Terminalia plants would be safe for medicinal uses.

Análisis fisicoquímico del MTA Angelus ® y Biodentine ® mediante difracción de rayos X, espectrometría de energía dispersiva, fluorescencia de rayos X, microscopio electrónico de barrido y espectroscopía de rayos infrarrojos / Physicochemical analysis of MTA Angelus ® and Biodentine ® conducted with X ray difraction, dispersive energy spectrometry, X ray fluorescence, scanning electron microscope and infra red spectroscopy

El propósito de este estudio fue caracterizar los componentes de los cementos comerciales para uso en odontología MTA Angelus ® Blanco (Angelus, Lodrina, Paraná Brasil) y de Biodentine TM (Septodont, Saint-Maur-des Fosses, Francia) mediante Microscopia Electrónica de Barrido, difracción de rayos X, fluorescencia de rayos X, espectrometría de dispersión de electrones y espectroscopia infrarroja. Los dos cementos se mezclaron según las indicaciones del fabricante. Se les practicó un estudio de textura de superficie mediante el microscopio electrónico de barrido (MEB), un análisis de difracción de rayos X (DRX), un análisis de fluorescencia de rayos X (FRX), un análisis de espectrometría de energía dispersiva (EDS) y un análisis de espectroscopia infrarroja (IR), para determinar los grupos funcionales. Resultados: Se presentó una diferencia en el análisis XRD entre Biodentine presentó Na2O y ZrO2 mientras que están ausentes en el MTA. El MTA presentó Cr2O3 y BiO2 ausentes en el Biodentine. En el análisis de EDS las diferencias fueron en el agente radiopacador y que el Biodentine presentó Cl a diferencia del MTA y en el análisis estadístico realizado, a pesar de que prácticamente se presentaron los mismos componentes, los porcentajes en los contenidos de éstos fueron estadísticamente signifi cativos. En el análisis de MEB hay una gran diferencia, el MTA presenta una superfi cie porosa e irregular, el Biodentine una forma fi brilar e irregular. Conclusión: Existe una gran similitud en los componentes químicos entre el MTA Angelus y Biodentine con excepción de los componentes químicos para proporcionarles radiopacidad, el tamaño y la forma del grano y en el caso del Biodentine el cloruro de calcio.

The aim of the present study was to characterize components of commercial cements used in dentistry MTA Angelus® White (Angelus Lodrina, Parana Brazil) and Biodentine TM (Septodont, Saint-Maurdes Fosses, France). Techniques used for said characterization were Scanning Electron Microscope, X-Ray Diffraction, X Ray Fluorescence, Electron Dispersion Spectrometry, and Infrared Spectroscopy. Both cements were mixed according to manufactures instructions. A study of surface texture was conducted with Scanning Electron Microscope (SEM), and X Ray Diffraction (XRD) analysis, and X Ray fluorescence analysis (XRF), an analysis of Dispersive Energy Spectrometry (DES), as well as an Infra Red Spectroscopy (IRS) in order to determine functional groups. Results: In XRD analysis, a difference was found: Biodentine exhibited Na2O and ZrO2. These elements were absent in MTA. MTA presented Cr2O3 and BiO2 which in turn were absent in Biodentine. EDS analysis revealed that differences were found in the radio-opacifying agent, and that Biodentine presented CaCl2 differing in this from MTA. Statistical analysis conducted revealed statistically signifi cant percentages in contents, even though components were found to be practically the same. SEM analysis revealed marked differences: MTA presented irregular and porous surface whereas Biodentine exhibited irregular and filament form. Conclusion: There is a great similarity in the chemical components of MTA Angelus and Biodentine, with the exception of chemical components providing radio-opacity, the size and form of the grain, and, in Biodentine presence of calcium chloride.

Imágenes de fluorescencia de rayos X en huesos humanos y su potencial aplicación in vivo / Images of X-ray fluorescence in human bones and their potential application in vivo

El conocimiento de la concentración y la distribución espacial de los elementos químicos presentes en diferentes órganos y tejidos resulta un parámetro útil para el diagnóstico de determinadas patologías o niveles por sobre los límites tolerables, por lo tanto el conocimiento de los elementos presentes en un tejido vivo, su concentración y distribución espacial podría proporcionar información relevante respecto del estado de salud de un individuo. Se presenta una aplicación de una nueva técnica de fluorescencia rayos X dispersiva en energía mediante barrido, la cual se puede aplicar a muestras de diferente composición y forma, a diferencia de, la mayoría de las técnicas existentes, que son aplicables sólo a muestras planas. Esta técnica permite la obtención de imágenes bidimensionales de los elementos químicos presentes en las muestras de un modo tanto mono como multielemental. En este trabajo es aplicada a un conjunto muestras óseas humanas y tarso y dedos de Gallus gallus (pollo) faenado, obteniéndose una distribución espacial 2D con diferentes niveles de intensidad fluorescente dependiendo del elemento detectado y de su concentración. Las imágenes logradas consideran áreas de hasta104 mm2, con una resolución espacial de hasta 0,25 mm2 y en un tiempo de adquisición de alrededor de 20 min. También se lleva a cabo un cálculo de la dosis de la radiación asociada a este tipo de análisis XRF, encontrándose que los niveles aplicados para la obtención de una imagen XRF son tolerables. Lo anterior permite concluir que sería posible el uso de esta técnica para una aplicación in vivo.

The knowledge of the concentration and spatial distribution that chemical elements present in different organs and tissues is a useful parameter for diagnosis of certain diseases or element levels above limits accepted as healthy. Therefore, development of techniques to identify the chemical elements present in a living tissue and obtaining information about their concentration and spatial distribution might be relevant to determine an individual's health status. This work presents an application of a new X-ray fluorescence technique, energy dispersive by scanning, which can be applied to samples of different composition and shape, unlike most of the existing techniques, only applicable to flat samples. This technique allows the acquisition of two-dimensional images of the chemical elements present in a sample in both mono and multi-elemental mode. In this work the technique is applied to a set of human bone samples and tarsus and fingers of a dead Gallus gallus (chicken), obtaining a 2D spatial distribution with different levels of fluorescence intensity, depending on the detected element and its concentration. The acquired images consider areas up to 104 mm2, with a spatial resolution of 400 mm2 and an acquisition time of about 20 min. Calculations of the radiation dose associated with this type of XRF analysis were also carried out, and the findings show that the levels applied to obtain an XRF image are tolerable. The latter leads to the conclusion that it would be possible to use this technique for an in vivo application.

Influence of accumulation of heaps of steel slag on the environment: determination of heavy metals content in the soils

The presence of high level of heavy metals involves a human healthy risk that could induce chronic diseases. This work reports on the metal contamination due to heaps of steel-slag accumulated during more than 40 years in allotments and industrial areas in the southern part of Madrid (Spain). Several slag and soil samples were collected in an area of 10 km² and characterized by different conventional (XRD and XRF) and no so common methods (ESEM, thermoluminescence and EDS-WDS). The analysis reveal the presence of: (i) important amounts of Fe (43 percent), Mg (26 percent), Cr (1.1 percent), Mn (4.6 percent), S (6.5 percent) in the form of Fe-rich slag phases (wustite, magnetite...), Si and Ca-rich phases (larnite, ghelenite...), Cr (chromite), Mn (bustamite) and graphite, (ii) traces of some other contaminants such as Cr (7700 ppm), Zn (3500 ppm), Ba (3000 ppm), Pb (700 ppm) or Cu (500 ppm) on pathway soil samples that come from the steel slag, and (iii) Co (13 ppm), Pb (78 ppm) and V (54 ppm) in farmland soil samples. Although the existing heavy metals content is not appropriate for the current use, the extremely high metal contamination of the surrounding areas is more worrying. The properties of the soil farmlands (pH circa 7, 13 percent of clay, mainly illite, and 1-4 percent of organic matter content) show suitable conditions for the retention of cationic metals, but further studies on the movilization of these elements have to be performed to determine the possibility of severe human health risks. This sort of study can provide useful information for the politicians regarding the appropriate use of the territory to prevent possible health hazard for the population.

A presença de altos niveis de metais pesados envolve riscos à saúde humana e pode induzir doenças crônicas. Este trabalho relata a contaminação metálica causada por pilhas de escória siderúrgica acumulada durante mais de 40 anos em áreas industriais na parte sul de Madrid (Espanha). Amostras de escória e solo foram coletadas em uma área de 10 km² e caracteri-zada por diferentes métodos, convencionais (XRD, XRF) ou não (ESEM, termoluminescência e EDS-WDS). A análise revela a presença de: i) quantidades importantes de Fe (43 por cento), Mg (26 por cento), Cr (1,1 por cento), Mn (4,6 por cento), S (6,5 por cento) formando várias fases ricas em Fe (wüstita, magnetita), Si e Ca (larnita, guelenita), Cr (cromita), Mn (bustamita) e grafite; (ii) tiajos de outros contaminantes, como Cr (7700 ppm), Zn (3500 ppm), Ba (3000 ppm), Pb (700 ppm) e Cu (500 ppm), no solo dos caminhos para as pilhas de resíduos e (iii) Co (13 ppm), Pb (78 ppm) e V (54 ppm) em amostras de solo agrícola. Embora os teores de metais pesados não sejam apropriados para uso corrente, a elevada contaminação de areas adjacentes é mais preocupante. Os solos adjacentes (pH ca. 7, 13 por cento de argila - principalmente ilita) e 1-4 por cento de matéria orgânica mostram condições adequadas para a retenção de cátions, mas outros estudos deverão ser realizados para determinar a possibilidade de riscos à saúde humana. Este tipo de trabalho pode fornecer informaçãoo útil para gestores públicos, com relação ao uso do território e prevenção de riscos à saúde da população.

Ingredients and cytotoxicity of MTA and 3 kinds of Portland cements / 대한치과보존학회지

The aim of this study was to compare the compositions and cytotoxicity of white ProRoot MTA (white mineral trioxide aggregate) and 3 kinds of Portland cements. The elements, simple oxides and phase compositions of white MTA (WMTA), gray Portland cement (GPC), white Portland cement (WPC) and fast setting cement (FSC) were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). Agar diffusion test was carried out to evaluate the cytotoxicity of WMTA and 3 kinds of Portland cements. The results showed that WMTA and WPC contained far less magnesium (Mg), iron (Fe), manganese (Mn), and zinc (Zn) than GPC and FSC. FSC contained far more aluminum oxide (Al2O3) than WMTA, GPC, and WPC. WMTA, GPC, WPC and FSC were composed of main phases, such as tricalcicium silicate (3CaO.SiO2), dicalcium silicate (2CaO.SiO2), tricalcium aluminate (3CaO.Al2O3), and tetracalcium aluminoferrite (4CaO.Al2O3.Fe2O3). The significance of the differences in cellular response between WMTA, GPC, WPC and FSC was statistically analyzed by Kruskal-Wallis Exact test with Bonferroni's correction. The result showed no statistically significant difference (p > 0.05). WMTA, GPC, WPC and FSC showed similar compositions. However there were notable differences in the content of minor elements, such as aluminum (Al), magnesium, iron, manganese, and zinc. These differences might influence the physical properties of cements.