RESUMO
Obtener una buena adhesión entre esmalte y bracket es un aspecto fundamental para el éxito del tratamiento en Ortodoncia. Algunos casos presentan desafíos en esta adhesión, especialmente cuando nos enfrentamos ante un esmalte con alteraciones como hipomineralizaciones, hipoplasias o fluorosis dental. Para sobreponer esta dificultad en la unión adhesiva se han propuesto diversas estrategias terapéuticas como es el uso de agentes desproteinizantes. El objetivo de esta revisión narrativa es describir el uso de hipoclorito de sodio como agente desproteinizante en dientes con alteraciones de esmalte para mejorar la adhesión en Ortodoncia. Se realizó una búsqueda bibliográfica en PubMed de los últimos 5 años. Se encontraron 116 artículos, de los cuales 23 cumplieron con los criterios requeridos y fueron seleccionados para la revisión. La desproteinización del esmalte con hipoclorito de sodio como paso previo al grabado ácido, es una estrategia útil en el proceso de cementación de aparatología de ortodoncia fija en dientes con alteraciones del esmalte. El uso de hipoclorito de sodio al 5,25 % es una alternativa de bajo co sto, no invasiva y eficiente para mejorar la fuerza de adhesión en pacientes con alteraciones del esmalte.
Obtaining good adhesion between enamel and bracket is a fundamental aspect for success in Orthodontics. Some cases present challenges in this adhesion, especially when we are faced with enamel with alterations such as hypomineralization, hypoplasia or dental fluorosis. To overcome this difficulty in adhesive bonding, various therapeutic strategies have been proposed, such as the use of deproteinizing agents. The objective of this study is to describe the use of sodium hypochlorite as a deproteinizing agent in teeth with enamel alterations to improve adhesion in Orthodontics. A bibliographic search was carried out in PubMed for articles within the last 5 years. In this study 116 articles were found, of which 23 met the required criteria and were selected for the review. Deproteinization of the enamel with sodium hypochlorite as a prior step to acid etching is an important stage in the cementation process of fixed appliances in orthodontics. The use of 5.25% sodium hypochlorite is a low-cost, non-invasive and efficient alternative to improve adhesion strength in patients with anomalies of tooth enamel.
RESUMO
A camada híbrida é definida pela zona de inter difusão do polímero do adesivo e o substrato dental. Os sistemas adesivos universais são materiais que foram criados com o intuito de substituir a estrutura dental que foi perdida a fim de diminuir essa área de interação adesiva e os espaços desmineralizados da dentina. O objetivo do seguinte estudo é realizar uma revisão de literatura acerca da influência dos adesivos universais e o uso do ácido glicólico como condicionante dental. Foi realizada uma busca na literatura atual, nas seguintes bases de dados: PubMed, Scielo, Medline e Google Acadêmico nos idiomas inglês e português usando os termos de pesquisa: "adhesive systems" AND "phosphoricacid" OR/AND "glycolicacid" OR/AND "hybridlayer" OR/AND "universal adhesive system". As pesquisas realizadas utilizando o ácido glicólico como agente condicionante dental demonstraram que a substância tem potencial e efetividade, diminuindo consideravelmente a região de fibras colágenas expostas para a fusão do adesivo universal. O ácido glicólico utilizado como agente condicionante de esmalte e dentina mostrou-se eficaz e promissor, tendo em vista que a camada híbrida se apresentou com menor espessura sem alterar a estrutura dentinária. Porém, faz-se necessário mais pesquisas utilizando o ácido glicólico juntamente com o sistema adesivo universal, por curto, médio e longo prazo.
The hybrid layeri s defined by the interdiffusion zone of the adhesive polymer and the dental substrate. Universal adhesive systems are materials that have been created with the aim of replacing the tooth structure that has been lost in order to reduce this area of adhesive interaction and the demineralized spaces of dentin. The aim of the following study is to perform a literature review on the influence of universal adhesives and the use of glycolic acid as a dental conditioning agent. A search was conducted in the current literature in the following databases: PubMed, Scielo, Medline and Google Scholar in English and Portuguese using the search terms: "adhesive systems" AND "phosphoric acid" AND "glycolic acid" AND "hybrid layer" OR "universal adhesive system". Research using glycolic acid as a dental conditioning agent has shown that the substance has potential and effectiveness, considerably reducing the region of collagen fibers exposed for the fusion of the universal adhesive. Glycolic acid used as a conditioning agent for enameland dent inproved to be effective and promising, considering that the hybrid layer was presented with less thickness without altering the dentin structure. However, further research his needed usinggly colic acid together with the universal adhesive system, for short, medium and long term.
Assuntos
Ácidos Fosfóricos , Adesividade , Adesivos Dentinários , Glicolatos , ÁcidosRESUMO
Objective To evaluate the clinical efficacy of navel application of Jianpi Hewei Adhesive Plaster combined with oral use of modified Sini Hewei Anshen Decoction in treating diabetic gastroparesis(DGP)accompanied by anxiety of liver-stomach disharmony type in type 2 diabetes patients.Methods One hundred patients with DGP accompanied by anxiety of liver-stomach disharmony type were randomly divided into a treatment group and a control group,with 50 patients in each group.The control group was given oral use of Mosapride Citrate Tablets orally,and the treatment group was given navel application of Jianpi Hewei Adhesive Plaster combined with oral use of modified Sini Hewei Anshen Decoction.The course of treatment for the two groups covered 4 weeks.The two groups were observed in the changes of the traditional Chinese medicine(TCM)syndrome scores,Gastroparesis Cardinal Symptom Index(GCSI)scores,Hamilton Anxiety Scale(HAMA)scores,gastric emptying time,and levels of fasting blood glucose(FBG),2-hour postprandial blood glucose(2hPG),glycated hemoglobin(HbA1c),plasma motilin(MOT),gastrin(GAS),and serum tumor necrosis factor alpha(TNF-α)and interleukin 6(IL-6)before and after the treatment.After treatment,the clinical efficacy and safety of the two groups were evaluated.Results(1)During the trial,4 patients in the treatment group and 3 patients in the control group fell off,and eventually a total of 93 patients were included for the efficacy statistics,including 46 patients in the treatment group and 47 patients in the control group.(2)After 4 weeks of treatment,the total effective rate of the treatment group was 95.65%(44/46)and that of the control group was 76.60%(36/47).The intergroup comparison(tested by chi-square test)showed that the therapeutic effect of the treatment group was significantly superior to that of the control group(P＜0.01).(3)After treatment,the TCM syndrome scores(including epigastric and abdominal congestion,depression or irritability,and poor appetite)and GCSI scores in the two groups were decreased compared with those before treatment(P＜0.05)and the gastric emptying time was shortened compared with that before treatment(P＜0.05),and the effect of the treatment group on decreasing TCM syndrome scores and GCSI scores and on shortening the gastric emptying time were significantly superior to that of the control group(P＜0.01).(4)After treatment,the plasma MOT and GAS levels of the two groups were increased compared with those before treatment(P＜0.05),and the increase in the treatment group was significantly superior to that in the control group(P＜0.01).(5)After treatment,the levels of glucose metabolism indicators of FBG,2hPG,and HbA1c in the two groups were decreased compared with those before treatment(P＜0.05),but the differences of all glucose metabolism indicators between the two groups after treatment were not statistically significant(P＞0.05).(6)After treatment,the serum TNF-α and IL-6 levels in the two groups were decreased compared with those before treatment(P＜0.05),and the decrease in the treatment group was significantly superior to that in the control group(P＜0.05).(7)After treatment,the total HAMA scores and the scores of mental anxiety factor and somatic anxiety factor of HAMA in the two groups were decreased compared with those before treatment(P＜0.05),and the effect on lowering the scores in the treatment group was significantly superior to that in the control group(P＜0.05).(8)During the treatment period,no significant adverse reactions occurred in the two groups of patients,which has high safety.Conclusion Navel application of Jianpi Hewei Adhesive Plaster combined with oral use of modified Sini Hewei Anshen Decoction exerts certain efficacy in treating DGP accompanied by anxiety of liver-stomach disharmony type.The therapy is effective on relieving clinical symptoms,enhancing gastric motility,inhibiting inflammatory response,and improving anxiety emotion and the quality of life of the patients.
RESUMO
Objective:To investigate the effects of 3 adhesives on the bond force and durability of polished and glazed zirconia ceram-ics to orthodontic metal brackets respectively.Methods:Universal adhesives,Single Bond Universal(SBU)and Prime&Bond Universal(PBU)were respectively used to bond polished and glazed zirconia to metal braces of maxillary central incisors using TransbondTM MIP(TM)as the control.The shear bond strength(SBS),the fracture morphology and adhesive residual index(ARI)were examed after wa-ter bath or water bath-thermal cycling storage.Results:The adhesive(P＜0.001)and storage conditions(P＜0.001)significantly af-fected the shear bond strength of zirconia to brackets.There was no significant difference between the polished or glazed groups(P=0.09).SBU showed the stronger SBS and lower ABI,there were significant differences in ARI scores among the 3 cements(P＜0.001).Conclusion:SBU may have better bonding performance than PBU and TM in the orthodontic bonding of polished or glazed zir-conia surfaces to the zirconia ceramics.
RESUMO
Objective@#To explore the effect of Morinda citrifolia juice (MCJ) combined with ethylene diamine tetraacetic acid (EDTA) on premolar bonding strength and nanoleakage and compare the results with those of the most commonly used root canal irrigation solution, sodium hypochlorite (NaClO), to provide a reference for clinical application.@*Methods@#This study was approved by the ethics review committee. Sixty-three human premolars extracted for orthodontic treatment were randomly divided into a control group (distilled water group) and 6 experimental groups according to the different rinsing solutions used after the surface enamel was removed. The experimental groups included Group A (2.5% NaClO), Group B (5.25% NaClO), Group C (6% MCJ), Group D (2.5% NaClO-17% EDTA), Group E (5.25% NaClO-17% EDTA), and Group F (6% MCJ-17% EDTA) (n = 9). After soaking in the corresponding rinsing solution for 20 minutes, they were layered and stacked on their surfaces to form 4 mm × 4 mm × 3 mm Z350 resin blocks. Six samples from each group were cut into 1 mm × 1 mm × 8 mm specimen strips for microtensile bonding strength testing. The fracture type was determined under a stereomicroscope, and the remaining 3 samples from each group were aged and cut into 1 mm thick slices for interface nanoleakage testing and scanning electron microscopy observation of the resin dentin bonding interface.@*Results@#There were significant differences in the microtensile bonding strength among the groups (P<0.05), and the control group had the highest bonding strength. Among experimental groups, Group B had the lowest bonding strength, mainly bonding interface fracture, and Group F had the highest bonding strength, mainly mixed fracture. There were significant differences in nanoleakage among all groups (P<0.05), and the control group had the lowest nanoleakage value. Among experimental groups, Group B had the highest nanoleakage, with resin protrusions being unaltered, and Group F had the lowest nanoleakage value, with resin protrusions being thick and dense.@*Conclusion@#The higher the concentration of NaClO was, the worse the bonding strength and edge sealing of the crown dentin were. The effects of root canal irrigation with MCJ and EDTA on the adhesive strength and edge sealing of crown dentin were less pronounced than those of root canal irrigation with NaClO and EDTA.
RESUMO
Objective To identify the influencing factors of operation time of hand-assisted laparoscopic living donor nephrectomy, and to analyze the relationship between influencing factors and the severity of postoperative complications. Methods Clinical data of 91 donors who underwent hand-assisted laparoscopic nephrectomy were retrospectively analyzed. The correlation between preoperative baseline data of donors and operation time was analyzed. The relationship between operation time and postoperative complications was assessed and the threshold of operation time was determined. Results Multiple donor renal arteries, thick perirenal and posterior renal fat, metabolic syndrome, high Mayo adhesive probability (MAP) score and Clavien-Dindo score prolonged the operation time. By analyzing the receiver operating characteristic (ROC) curve, we found that when the operation time was ≥138 min, the incidence of postoperative complications of donors was significantly increased (P<0.05). Conclusions For donors with multiple renal arteries, thick perirenal and posterior renal fat, metabolic syndrome and high MAP score and Clavien-Dindo score, experienced surgeons should be selected to make adequate preoperative preparation and pay close attention after surgery, so as to timely detect postoperative complications and reduce the severity of complications, enhance clinical prognosis of the donors.
RESUMO
Abstract This study evaluated a new method of adhesive system application on the bond strength between fiber post and root dentin using two adhesive systems. The canals of sixty bovine incisors were prepared and obturated. The roots were divided into six groups (n=10) according to the adhesive system (Clearfil SE - CSE and Single Bond Universal - SBU) and the application strategy (microbrush - MB; rotary brush - RB; and ultrasonic tip - US). The glass fiber posts were cemented with resin cement (RelyX ARC). The roots were sectioned perpendicularly to their long axis, and three slices per root were obtained. Previously to the push-out test, confocal laser scanning microscopy (CLSM) was performed to illustrate the interfacial adaptation of the cement to the root canal walls. Failure patterns were analyzed with 40x magnification. Shapiro-Wilk indicated a normal distribution of the data. The bond strength values were compared using one-way ANOVA and Tukey's tests. Student's T test analyzed the differences between the adhesive systems within each third and protocol. A significance level of 5% was used. CSE with RB showed higher mean bond strength values compared to MB (conventional technique) (P < 0.05). US application resulted in intermediate bond strength values for CSE (P > 0.05). The application of SBU using RB generated higher mean bond strength values compared to MB and US (P < 0.05). Adhesive failures were predominant (65.5%). CSE and SBU application with the new rotary brush improved the bond strength of fiber posts to root dentin compared to the conventional strategy.
Resumo Este estudo avaliou o efeito de um novo método para aplicação do sistema adesivo na resistência de união entre pino de fibra e dentina radicular usando dois sistemas adesivos. Os canais de sessenta incisivos bovinos foram preparados e obturados. As raízes foram divididas em seis grupos (n=10) de acordo com o sistema adesivo (Clearfil SE - CSE e Single Bond Universal - SBU) e com a estratégia de aplicação (microbrush - MB, escova rotatória - RB e inserto ultrassônico - US). Os pinos de fibra foram cimentados utilizando cimento resinoso (RelyX ARC). As raízes foram seccionadas perpendicularmente ao seu longo eixo e três fatias foram obtidas. Previamente ao teste de push-out, foi realizada microscopia de varredura confocal a laser para ilustrar a adaptação interfacial do cimento às paredes do canal radicular. Os padrões de falha foram analisados com magnificação de 40x. O teste de Shapiro-Wilk indicou distribuição normal dos dados. Os valores de resistência de união foram comparados usando o teste ANOVA de uma via e post hoc de Tukey. As diferenças entre os sistemas adesivos em cada terço e de acordo com cada protocolo foram analisadas pelo teste T de Student. O nível de significância foi de 5%. CSE aplicado com RB apresentou maiores valores médios de resistência de união do que quando aplicado com MB (técnica convencional) (P<0,05). Aplicação com US apresentou valores intermediários de resistência de união para o CSE (P>0,05). A aplicação do SBU utilizando RB gerou maiores valores médios de resistência de união comparados com MB e US (P<0,05). Falhas adesivas foram predominantes (65,5%). A aplicação do CSE e SBU com a nova escova rotatória melhorou a resistência de união dos pinos de fibra à dentina radicular comparados com a estratégia convencional.
RESUMO
Abstract This study verified the effect of the combination of preheated hydrofluoric acid/silane/electric current in the adhesion of the resin cement to ceramic. IPS E.max Press ceramic discs embedded in PVC rigid tubes were divided into four groups associating preheated hydrofluoric acid and silane applied with electrical current (n=10): Ha+S (Heated acid + silane); Ha+S+Ec (Heated acid + silane + electrical current); A+S (Acid + silane) and A+S+Ec (Acid + silano + electrical current). Resin cement/ceramic samples were stored in water at 37°C for 24h. After storage, they were submitted to the microshear test, fracture analysis, and contact angle at 24h or after thermocycling (10,000 cycles/5-55ºC). Bond strength data were evaluated by two-way ANOVA. For comparison between evaluation times (24h or thermocycling) was applied unpaired t-test. A significance post-hoc test of p=0.05 was assumed for analyses and graphs (GraphPad Prism 9.0 software). At 24h, the microshear strength showed similar values between Ha+S, Ha+S+Ec, and A+S+Ec groups, while A+S showed the lowest value with a statistical difference. After thermocycling, Ha+S and Ha+S+Ec were similar, as well as A+S and A+S+Ec. There was a significant difference in all groups comparing 24h (highest value) with after thermocycling (lowest value). Adhesive fracture was predominant in all groups and evaluation times. Ha+S and A+S groups showed higher contact angle values compared to the Ha+S+Ec and A+S+Ec with lower values. In conclusion, the association of preheated hydrofluoric acid/silane applied or not with electric current promoted different microshear strength values, fracture types, and contact angles in the resin cement/ceramic bond.
Resumo Este estudo verificou o efeito da combinação ácido fluorídrico pré-aquecido/silano/corrente elétrica na adesão do cimento resinoso à cerâmica. Os discos cerâmicos IPS E.max Press embutidos em tubos rígidos de PVC foram separados em quatro grupos associando ácido fluorídrico pré-aquecido e silano aplicado com corrente elétrica (n=10): Ha+S (ácido aquecido + silano); Ha+S+Ec (Ácido aquecido + silano + corrente elétrica); A+S (Ácido + silano) e A+S+EC (Ácido + silano + corrente elétrica). Amostras de cimento resinoso/cerâmica foram armazenadas em água a 37°C por 24 horas. Após o armazenamento foram submetidas ao ensaio de micro cisalhamento, análise de fratura e ângulo de contato no período de 24 horas ou após termociclagem (10.000 ciclos/5-55ºC). Os dados de resistência de união foram avaliados por ANOVA dois fatores. Para comparação entre os tempos de avaliação (24 horas ou termociclagem) foi aplicado o teste t não pareado. Foi assumida significância de 5% para análises e gráficos (software GraphPad Prism 9.0). Em 24 horas, a resistência ao micro cisalhamento apresentou valores similares entre os grupos Ha+S, Ha+S+Ec e A+S+Ec, enquanto A+S apresentou menor valor com diferença estatística. Após a termociclagem, Ha+S e Ha+S+Ec foram similares, assim como A+S e A+S+Ec. Houve diferença significativa em todos os grupos comparando 24 horas (maior valor) com após termociclagem (menor valor). A fratura adesiva foi predominante em todos os grupos e tempos de avaliação. Os grupos Ha+S e A+S apresentaram maiores valores de ângulos de contato comparados aos grupos Ha+S+Ec e A+S+Ec com valores menores. Em conclusão, a associação ácido fluorídrico pré-aquecido/silano aplicado com corrente elétrica promoveu diferentes valores de resistência ao micro cisalhamento, tipos de fratura e ângulos de contato na adesão do cimento resinoso à cerâmica.
RESUMO
Abstract The aim was to evaluate the effect of stress distribution on vertical, horizontal, and oblique forces on the tooth model after reattaching the fragments of the maxillary incisor with vertical root fracture (VRF) using different materials, by 3D finite element analysis (FEA). Tooth with a root canal, spongious, and cortical bone models were designed. VRF was modeled on a tooth with 4 different re-attachment models: Group 1: dual-cure cement (DC)+fiber reinforced composite (FRC), Group 2: DC+polyethylene fiber, Group 3: DC+glass fiber, and Group 4:DC. 100 N force was applied in 3 different directions. Maximum principal stresses (σmax) of dentin, and re-attachment materials were evaluated on colored images. The highest σmax values were on the repair materials under vertical forces for Groups 1 and 4, respectively; Groups 2 and 3 showed similarity. The highest σmax values in repair materials under horizontal and oblique forces were observed in Group 3 however the lowest σmax values in repair materials under oblique and horizontal forces were observed in Group 1. The stress values on repair materials gradually increased respectively starting from horizontal to vertical. As the elasticity modulus of the repair materials increased, the stress values on root dentin increased. Through all force directions, except vertical forces, lower stress values were observed with FRC. The fracture resistance was bigger when using solely FRC or dual-cure resin cement in comparison to fiber-supported designs. Adding polyethylene fiber to re-restorations decreased stress values compared to glass fiber addition. Therefore, when adding fibers, polyethylene fiber will be advantageous.
Resumo O objetivo foi avaliar o efeito da distribuição de estresse nas forças verticais, horizontais e oblíquas no modelo de dente após a recolocação dos fragmentos do incisivo superior com fratura radicular vertical (FRV) usando diferentes materiais, por meio da análise de elementos finitos (FEA) em 3D. Métodos: Foram projetados modelos de dentes com canal radicular, osso esponjoso e cortical. A FRV foi modelada em um dente com 4 modelos diferentes de reataque, como Grupo 1: cimento de cura dupla (DC) + compósito reforçado com fibra (FRC), Grupo 2: DC + fibra de polietileno, Grupo 3: DC + fibra de vidro e Grupo 4: DC. Foi aplicada uma força de 100 N em 3 direções diferentes. As tensões principais máximas (σmax) da dentina e os materiais de recolocação foram avaliados em imagens coloridas. Resultados: Os valores mais altos de σmax foram registrados nos materiais de reparo sob forças verticais para os Grupos 1 e 4, respectivamente; os Grupos 2 e 3 apresentaram semelhança. Os valores mais altos de σmax nos materiais de reparo sob forças horizontais e oblíquas foram observados no Grupo 3; no entanto, os valores mais baixos de σmax nos materiais de reparo sob forças oblíquas e horizontais foram observados no Grupo 1. Os valores de tensão nos materiais de reparo aumentaram gradualmente, respectivamente, começando da holizontal para a vertical. À medida que o módulo de elasticidade dos materiais de reparo aumentava, os valores de tensão na dentina da raiz aumentavam. Em todas as direções de força, exceto nas forças verticais, foram observados valores de tensão mais baixos com o FRC. Conclusões: a resistência à fratura foi maior quando se utilizou apenas FRC ou cimento resinoso de cura dupla em comparação com os designs com suporte de fibra. A adição de fibra de polietileno às restaurações diminuiu os valores de tensão em comparação com a adição de fibra de vidro. Portanto, ao adicionar fibras, a fibra de polietileno será vantajosa.
RESUMO
Abstract This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.
Resumo O objetivo deste estudo foi investigar o impacto do design da cavidade de acesso na resistência à fratura de primeiros pré-molares superiores tratados endodonticamente. MÉTODOS: A amostra do estudo consistiu em 72 primeiros pré-molares superiores intactos, divididos aleatoriamente em seis grupos (n = 12). Um preparo padronizado da cavidade proximal foi realizado para todas as amostras usando broca padrão. Grupos I: grupo de controle com apenas cavidade proximal padrão e sem acesso endodôntico, grupo II: cavidade de acesso Truss, grupo III: acesso separado aos canais vestibular e palatino sem remoção de dentina entre eles, grupo IV: acesso aos canais vestibular e palatino com remoção de dentina entre eles, grupo V: cavidade de acesso tradicional, grupo VI: cavidade mesio-oclusal-distal (MOD). Para os grupos I e VI, apenas a restauração de compósito foi usada para restaurar a cavidade proximal. Já nos grupos II e V, o acesso foi preparado e o tratamento endodôntico foi realizado em todos os dentes e, em seguida, foi colocada a restauração de resina composta. Os canais radiculares foram instrumentados com limas de níquel-titânio, irrigados com hipoclorito de sódio e preenchidos com AH plus sealer e guta-percha usando condensação vertical quente. Todas as amostras foram então colocadas em molde de acrílico e submetidas a envelhecimento térmico por 10.000 ciclos entre 5 e 55°C. As amostras foram fixadas em uma máquina de teste universal com o eixo longo das raízes posicionado a 20° para uma carga aplicada a uma velocidade de cruzeta de 1 mm/min usando indentador semiesférico de aço inoxidável (Ø = 3 mm) até que ocorresse a fratura para determinar a força de resistência à fratura em Newton. RESULTADOS: O teste de normalidade (Shapiro-Wilk) mostrou que os dados são normalmente distribuídos. O grupo II apresentou a maior resistência média à fratura, e o grupo VI foi o menos propenso a resistir à fratura. Não houve diferenças estatisticamente significativas entre os grupos testados (p-valor = 0,237). O grupo MOD apresentou um modo de fratura mais desfavorável em comparação com os outros grupos. CONCLUSÕES: Não houve diferença significativa na resistência à fratura entre as cavidades de acesso conservador e tradicional. A ausência de cristas marginais, como nas cavidades MOD, desempenhou um papel importante na diminuição da resistência à fratura dos dentes tratados endodonticamente.
RESUMO
Abstract This study evaluated the influence of hydrofluoric acid (HF) concentration and thermal cycling on the microshear bond strength (µSBS) of a resin luting agent to IPS e.max® CAD and Rosetta® SM. Ceramic specimens (12.0 x 14.0 x 1.5mm) were randomized into 8 groups (n=10) according to HF concentration, commercial brand, and aging. Immediately after polishing, and etching, all specimens were silanized and a layer of adhesive was applied. A PVS mold of 3 mm thickness and 10mm diameter with (four) 1.0mm holes was fabricated, placed on each specimen, and then filled with a resin luting agent. Half of the specimens were subjected to the µSBS test using an Instron at a speed of 1.0 mm/min, following a 24-hour storage in deionized water at 37ºC. The remaining specimens were subjected to thermal cycling (5ºC-55ºC, 30 seconds per bath) and µSBS. The data were evaluated utilizing a three-way ANOVA and Tukey's post-hoc test (α=0.05). Significant differences were found for HF concentration and aging (p<0.0001). No significant difference in µSBS was found for commercial brands (p=0.085). The interaction between brand and HF concentration (p=0.358), brand and aging (p=0.135), and HF concentration and aging (p=0.138) were not statistically significant. The triple interaction among these factors was not statistically significant (p=0.610). In conclusion, the bond strength is affected by the HF concentration. No statistical difference was observed between the two ceramics. Thermal cycling significantly reduced µSBS.
Resumo Este estudo avaliou a influência da concentração do ácido fluorídrico (AF) e da ciclagem térmica na resistência de união ao microcisalhamento (RUµC) de um cimento resinoso para IPS e.max® CAD e Rosetta® SM. Espécimes cerâmicos (12,0 x 14,0 x 1,5mm) foram divididos em 8 grupos (n=10) de acordo com concentração do HF, marca comercial e envelhecimento. Imediatamente após o polimento e condicionamento ácido, todos os espécimes foram silanizados e uma camada de adesivo foi aplicada. Um molde PVS de 3 mm de espessura e 10 mm de diâmetro com (quatro) orifícios de 1,0 mm foi confeccionado, colocado em cada espécime e preenchido com o cimento resinoso. Metade dos espécimes foi submetida ao teste RUµC na Instron a velocidade de 1,0 mm/min, após 24 horas de armazenamento em água deionizada a 37ºC. Os espécimes restantes foram submetidos a ciclagem térmica (5ºC-55ºC, 30 segundos por banho) e a RUµC. Os dados foram avaliados por ANOVA de três fatores e ao teste post-hoc de Tukey (α=0,05). Diferenças significativas foram encontradas para concentração de HF e envelhecimento (p<0,0001). Nenhuma diferença significativa na RUµC foi encontrada para cada marca comercial (p=0,085). A interação entre marca comercial e a concentração do HF (p=0,358), marca comercial e envelhecimento (p=0,135) e concentração do HF e envelhecimento (p=0,138) não foram estatisticamente significativas. A tripla interação entre esses fatores não foi estatisticamente significativa (p=0,610). Concluindo, a resistência de união é afetada pela concentração de HF. Não foi observada diferença estatística entre as duas cerâmicas. A ciclagem térmica reduziu significativamente a resistência de união ao microcisalhamento.
RESUMO
Abstract ER:YAG laser and experimental resin-based dental adhesive loaded with functionalized carbonated apatite filler were used in this study to evaluate the dentin interaction in terms of penetration and occlusion of the dentinal tubules aiding in the control of dentin hypersensitivity (DH). Spheroidal Carbonated apatite nanoparticles (N-CAP), with an average size of 20±5 nm diameter, were synthesized, characterized, and incorporated in a universal adhesive "All Bond Universal, Bisco, USA", in (2% weight) concentration. Er:YAG laser "Lightwalker, FOTONA, EU" was adjusted to an energy output of 40mJ/ pulse and pulse repetition of 10 Hz for 10 seconds. Dentin specimens were prepared from the buccal surface of 75 extracted sound human molars. The specimens were randomly divided into five groups (n=15) according to the surface treatment: Group (L): Laser only; Group (LB): Laser in combination with adhesive; Group (LBN): Laser in combination with adhesive loaded with N-CAP; Group (B): adhesive only; and Group (BN): adhesive loaded with N-CAP. Depth of penetration and occlusion of the dentinal tubules were assessed using Environmental Scanning Electron Microscope Examination (ESEM). One-way ANOVA was used to compare groups, followed by a pairwise test for multiple comparisons (α=0.05). Groups (LB), and (LBN) showed the highest mean of dentinal tubules' penetration, with a non-significant difference between them. In contrast, the specimens treated with laser only (L) showed the most minor penetration. The employment of ER-YAG laser irradiation with the adhesive loaded with N-CAP was evaluated to be effective in penetrating and occluding the opened dentinal tubules.
Resumo O laser ER-YAG e o adesivo dentário experimental à base de resina carregado com carga de apatita carbonatada funcionalizada foram usados neste estudo para avaliar a interação com a dentina em termos de penetração e oclusão dos túbulos dentinários, auxiliando no controle da hipersensibilidade dentinária (HD). Nanopartículas de apatita carbonatada esferoidal (N-CAP), com tamanho médio de 20±5 nm de diâmetro, foram sintetizadas, caracterizadas e incorporadas em um adesivo universal "All Bond Universal, Bisco, EUA", na concentração de 2% em peso. O laser Er:YAG "Lightwalker, FOTONA, EU" foi ajustado para uma saída de energia de 40mJ/pulso e repetição de pulso de 10 Hz por 10 segundos. Os espécimes de dentina foram preparados a partir da superfície vestibular de 75 molares humanos sadios extraídos. Os espécimes foram divididos aleatoriamente em cinco grupos (n=15) de acordo com o tratamento da superfície: Grupo (L): Somente laser; Grupo (LB): Laser em combinação com adesivo; Grupo (LBN): Laser em combinação com adesivo carregado com N-CAP; Grupo (B): somente adesivo; e Grupo (BN): adesivo carregado com N-CAP. A profundidade de penetração e a oclusão dos túbulos dentinários foram avaliadas por meio do Exame de Microscópio Eletrônico de Varredura Ambiental (ESEM). ANOVA de um fator foi usada para comparar os grupos, seguida pelo teste de pares para comparações múltiplas (α=0,05). Os grupos (LB) e (LBN) apresentaram a maior média de penetração dos túbulos dentinários, com uma diferença não significativa entre eles. Em contraste, os espécimes tratados apenas com laser (L) apresentaram menor penetração. O emprego da irradiação do laser ER-YAG com o adesivo carregado com N-CAP foi avaliado como eficaz na penetração e oclusão dos túbulos dentinários abertos.
RESUMO
Abstract Studies regarding cytotoxic effects attributed to the use of adhesive bonding agents on pulp tissue are not conclusive. To point out whether these materials are safe for clinical use, in vivo exposure of dental pulp to adhesive bonding agents was simulated using an experimental setup in which Human Dental Pulp Stem Cells (hDPSC) are exposed to the action of two kinds of adhesives: self-etching adhesives and two-step bonding agents through a dentine barrier. Cytotoxic effects on these cells were evaluated by MTT assay protocol and fluorescence microscopy, and their results were contrasted to those obtained through Raman spectra taken on single hDPSCs. Overall, no significant cytotoxic effects were observed by combining all the techniques, and cell viability close to 90% was achieved for a dentine barrier of at least 1 mm thick. Moreover, Raman spectroscopy was able to detect structural DNA damage in some dental pulp cells when exposed to two-step bonding agents, suggesting that this technique could be considered a complementary tool with the potential to evaluate cell toxicity beyond cell viability.
Resumo Os estudos sobre os efeitos citotóxicos atribuídos ao uso de agentes de união adesivo no tecido pulpar não são conclusivos. Para determinar se esses materiais são seguros para uso clínico, a exposição in vivo da polpa dentária a agentes de união adesiva foi simulada por meio de uma configuração experimental na qual as células-tronco da polpa dentária humana (hDPSC) são expostas à ação de dois tipos de adesivos: adesivos autocondicionantes e agentes de união de duas etapas por meio de uma barreira de dentina. Os efeitos citotóxicos nessas células foram avaliados pelo protocolo de ensaio MTT e microscopia de fluorescência, e seus resultados foram contrastados com os obtidos por meio de espectros Raman obtidos em hDPSCs individuais. De modo geral, não foram observados efeitos citotóxicos significativos com a combinação de todas as técnicas, e a viabilidade celular próxima a 90% foi obtida para uma barreira de dentina de pelo menos 1 mm de espessura. Além disso, a espectroscopia Raman foi capaz de detectar danos estruturais ao DNA em algumas células da polpa dentária quando expostas a agentes de colagem de duas etapas, sugerindo que essa técnica poderia ser considerada uma ferramenta complementar com potencial para avaliar a toxicidade celular além da viabilidade celular.
RESUMO
Abstract Objective The advent of the Internet has provided new, easily accessible resources for patients seeking additional health information. Many doctors and healthcare organizations post informative videos on this platform, and nearly all patients are looking for videos online for a second opinion. Methods The phrases "frozen shoulder," "frozen shoulder treatment," "adhesive" capsulitis, and "adhesive capsulitis treatment" were entered into YouTube's search bar for a normal inquiry. The informativeness and overall quality of the adhesive capsulitis videos were rated using three separate scales. Results The mean and standard deviation values of the scoring systems were JAMA 1.25 ± 0.51, DISCERN 39.4 ± 13.4, GQS 2.83 ± 0.96 and ACSS 7.43 ± 4.86, respectively. Number of views, rate of views, and likes all had a positive correlation with Global Quality Score (GQS), as did DISCERN and ACSS. There was no statistically significant difference between the median JAMA, GQS score and Discern Criteria values according to the video source/uploader (p > 0.05). Conclusion YouTube videos on adhesive capsulitis, thus, need to be of higher quality, reliability, and instructive quality. There is a need for reliable videos about adhesive capsulitis, with instructional and high-quality cited.
Resumo Objetivo O advento da Internet proporcionou recursos novos e de fácil acesso para pacientes que procuram mais informações sobre saúde. Muitos médicos e organizações de saúde publicam vídeos informativos nesta plataforma e quase todos os pacientes procuram tais vídeos online para uma segunda opinião. Métodos As frases "frozen shoulder (ombro congelado)", "frozen shoulder treatment (tratamento de ombro congelado)", "adhesive capsulitis (capsulite adesiva)" e "adhesive capsulitis treatment (tratamento de capsulite adesiva)" foram inseridas na barra de pesquisa do YouTube para uma consulta normal. A informatividade e a qualidade geral dos vídeos sobre capsulite adesiva foram avaliadas usando três escalas distintas. Resultados Os valores de média e desvio padrão dos sistemas de pontuação do Journal of the American Medical Association (JAMA) foram 1,25 ± 0,51, DISCERN, 39,4 ± 13,4, Global Quality Score (GQS, Índice de Qualidade Global em português) 2,83 ± 0,96 e Adhesive Capsulitis Specific Score (ACSS, Escore Específico de Capsulite Adesiva em português), 7,43 ± 4,86, respectivamente. O número de visualizações, a taxa de visualizações e as curtidas tiveram uma correlação positiva com GQS, DISCERN e ACSS. Não houve diferença estatisticamente significativa entre os valores medianos de JAMA, GQS e DISCERN de acordo com a fonte/carregador do vídeo (p > 0,05). Conclusão Os vídeos do YouTube sobre capsulite adesiva precisam ter maior qualidade, confiabilidade e qualidade instrutiva. Há necessidade de vídeos confiáveis sobre capsulite adesiva, com citações instrutivas e de alta qualidade.
Assuntos
Apoio Social , Gravação em Vídeo , Bursite , Internet , Educação MédicaRESUMO
Introducción: La influencia de la clorhexidina sobre la fuerza de unión de los sistemas adhesivos es aún muy controversial. Objetivo: Determinar la fuerza de unión de dos adhesivos universales en dentina previa aplicación de la clorhexidina al 2 % en tiempos de aplicación diferentes. Métodos: Se empleó treinta incisivos y se desgastó la superficie vestibular para exponer la dentina. Posteriormente, se dividió aleatoriamente en seis grupos (n = 5). Se emplearon los adhesivos Single Bond Universal (SBU) y All-Bond Universal (ABU) con/sin clorhexidina. Grupo SBU-0: Single Bond Universal; Grupo SBU-30: clorhexidina por 30 segundos + Single Bond Universal; Grupo SBU-60: clorhexidina por 60 segundos + Single Bond Universal; Grupo ABU-0: All-Bond Universal; Grupo ABU-30: clorhexidina por 30 segundos + All-Bond Universal y Grupo ABU-60: clorhexidina por 60 segundos + All-Bond Universal. La resistencia adhesiva se analizó mediante ANOVA mixto de dos factores y post hoc de Tukey (p < 0,05). Resultados: La fuerza de unión para el grupo SBU-60 aumentó significativamente respecto al grupo control (p = 0,032). Igualmente, para los grupos ABU-30 y ABU-60, la fuerza de unión aumentó significativamente respecto al grupo control (p = 0,001) y (p = 0,000), respectivamente. Conclusión: La aplicación previa de clorhexidina al 2 % durante 60 segundos aumenta la fuerza de unión de los sistemas adhesivos Single Bond Universal y All-Bond Universal.
Introduction: The influence of chlorhexidine on the bond strength of adhesive systems is still very controversial. Objective: To determine the bond strength of two universal adhesives on dentin after application of 2% chlorhexidine at different application times. Methods: Thirty incisors were used and the vestibular surface was abraded to expose the dentin. Subsequently, they were randomly divided into six groups (n = 5). Single Bond Universal (SBU) and All-Bond Universal (ABU) adhesives with/without chlorhexidine were used. Group SBU-0: Single Bond Universal; Group SBU-30: chlorhexidine for 30 seconds + Single Bond Universal; Group SBU-60: chlorhexidine for 60 seconds + Single Bond Universal; Group ABU-0: All-Bond Universal; Group ABU-30: chlorhexidine for 30 seconds + All-Bond Universal and Group ABU-60: chlorhexidine for 60 seconds + All-Bond Universal. Adhesive strength was analyzed by two-factor mixed ANOVA and Tukey's post hoc (p < 0.05). Results: The bond strength for the SBU-60 group increased significantly with respect to the control group (p = 0.032). Similarly, for the ABU-30 and ABU-60 groups, the bond strength increased significantly with respect to the control group (p = 0.001) and (p = 0.000), respectively. Conclusion: Pre-application of 2% chlorhexidine for 60 seconds increases the bond strength of Single Bond Universal and All-Bond Universal adhesive systems.
RESUMO
Abstract Objective To evaluate the functionality in patients with adhesive capsulitis undergoing suprascapular nerve block (SSNB). Methods A before-and-after clinical prospective study in a single center was conducted with patients with secondary adhesive capsulitis treated with four nerve blocks based on anatomical limits. The sample was non-probabilistic, and it was obtained after a routine appointment at a specialized outpatient clinic. The instruments used for evaluation were the International Classification of Functioning, Disability and Health (ICF) and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire, which were applied at baseline (T0), one week after the fourth SSNB (T4), and three months after the first SSNB (T12). The paired t-test was used to compare the means of the ICF checklist items and DASH in the different: T0xT4;T4xT12;and T0xT12). The probability of rejecting the null hypothesis was 5%. Results The sample was composed of 25 individuals with a mean age of 58.16 years; 16 of them were female. The duration of the pain symptoms ranged from 2 to 16 months, with a mean of 5.92 months. The ICF checklist showed that all domains had already improved in T4 except for the environmental factors, which only improved at 03 months (p = 0.037). The patients reported improvements in shoulder function in T4, which increased more in T12, at the end of data collection (p = 0.019). Conclusion The SSNB technique is effective in patients with adhesive capsulitis after4 weeks of application, with improvements in individual's functionality lasting for 12 weeks.
Resumo Objetivo Avaliar a funcionalidade em pacientes com capsulite adesiva submetidos a bloqueio do nervo supraescapular (BNSE). Métodos Um estudo clínico prospectivo do tipo antes e depois foi realizado em um único centro com pacientes com capsulite adesiva secundária tratados com quatro bloqueios baseados em limites anatômicos. A amostra foi não probabilística, tendo sido obtida após consulta de rotina em ambulatório especializado. Os instrumentos utilizados para avaliação foram a Classificação Internacional de Funcionalidade, Incapacidade e Saúde (CIF) e o questionário de Disfunções do Braço, Ombro e Mão (DASH), que foram aplicados antes da intervenção (T0), uma semana após o quarto BNSE (T4),etrêsapósoprimeiroBNSE(T12).AsmédiasdositensdaCIFedoDASHnos diferentes tempos (T0 x T4; T4 x T12; e T0 x T12) foram comparadas por meio do teste t pareado. A probabilidade de rejeitar a hipótese nula foi de 5%. Resultados A amostra foi composta por 25 indivíduos com média de idade de 58,16 anos; 16 eram mulheres. A duração dos sintomas dolorosos variou de 2 a 16 meses, com média de 5,92 meses. A CIF mostrou que todos os domínios já haviam melhorado em T4 à exceção dos fatores ambientais, que só melhoraram aos 3 meses (p = 0,037). Os pacientes já relataram melhora na função do ombro em T4 emaisainda em T12,ao finaldacoletadedados (p = 0,019). Conclusão A técnica de BNSE é eficaz em pacientes com capsulite adesiva após 4 semanas de aplicação, com melhora da funcionalidade do indivíduo e sua manutenção até 12 semanas.
Assuntos
Humanos , Bursite , Classificação Internacional de Funcionalidade, Incapacidade e Saúde , Bloqueio NervosoRESUMO
Dental fluorosis can cause changes in the enamel surface, conditioning its functionality and esthetics. The application of dental adhesives is a treatment option; however, their use on fluorotic teeth can result in limitations. The aim of this study was to compare the shear bond strength of two different adhesives, one with 10-MDP and one without 10-MDP, in different degrees of dental fluorosis.This is an in vitro study on dental enamel samples, a total of 180 samples with the inclusion criteria were treated, randomly divided into two groups of 90, according to the type of dental adhesive, where each group was again divided into three groups of 30 samples, representing different degrees of dental fluorosis according to the Thylstrup-Fejerskov index (Group I: TF1 and TF2; Group II: TF3; Group III: TF4). Normality tests, two-factor ANOVA, and post-hoc tests were used to determine differences between the groups, with a significance level of 95%. As results, a statistically significant difference was shown between the use of dental adhesive with 10-MDP and the three groups of dental fluorosis (p=0.011), in addition, a Tukey post-hoc test on the groups treated with 10-MDP adhesive revealed a statistically significant difference between group I versus group II, and group I versus group III, (p=<0.05). It is concluded that the use of adhesive systems with 10-MDP presents a better shear bond strength on enamel with dental fluorosis grades I and II in the Thylstrup-Fejerskov index.
La fluorosis dental puede ocasionar cambios en la superficie del esmalte, condicionando su funcionalidad y estética, la aplicación de adhesivos dentales es una opción de tratamiento, sin embargo, su uso en dientes fluoroticos puede resultar en limitaciones. El objetivo de este estudio consistió en comparar la fuerza de adhesión a la cizalladura de dos diferentes adhesivos, uno con 10-MDP y otro sin 10-MDP, en diferentes grados de fluorosis dental. Se trata de un estudio in vitro en muestras de esmalte dental, un total de 180 muestras con los criterios de inclusión fueron tratadas, aleatoriamente divididas en dos grupos de 90, de acuerdo al tipo de adhesivo dental, donde cada grupo fue dividido nuevamente en tres grupos de 30 muestras, representando diferentes grados de fluorosis dental según el índice de Thylstrup- Fejerskov (Grupo I: TF1 y TF2; Grupo II: TF3; Grupo III: TF4). Para determinar diferencias entre los grupos se utilizaron pruebas de normalidad, ANOVA de dos factores, y pruebas post-hoc, con un nivel de significancia de 95%. Como resultados, se mostró una diferencia estadísticamente significativa entre el uso de adhesivo dental con 10- MDP y los tres grupos de fluorosis dental (p=0.011), además, una prueba post hoc de Tukey sobre los grupos tratados con adhesivo 10-MDP revelaron una diferencia estadísticamente significativa entre el grupo I frente al grupo II, y el grupo I frente al grupo III, (p=<0.05) Se concluye que el uso de sistemas adhesivos con 10-MDP presentan una mejor resistencia de adhesión al cizallamiento en esmalte con grados de fluorosis dental I y II en el índice de Thylstrup-Fejerskov
Assuntos
Adesivos Dentinários/uso terapêutico , Fluorose Dentária/diagnóstico , Cimentos de ResinaRESUMO
Varmam- a discrete medical science and a great contribution of Siddhars to Tamil Nadu. It encompases Varma martial arts, Varma therapy, internal and external medicines. Varma therapy and medicines effectively treat neuro musculoskeletal conditions which is admirable. Shoulder pain is most common orthopaedic condition. It is the third common cause of musculoskeletal consultations in primary care. Approximately 1% of adult develops new shoulder pain annually. Common pathological conditions of shoulder like rotator cuff disorders and adhesive capsulitis etc exhibits similar clinical features like pain and stiffness of shoulder joint and restricted movements. Varma therapy rearranges and regulates the “Vaasi” and consequently helps to maintain the equilibrium of trihumours (Vatham, Pitham, Kapham). This review article explicates the Varma points for the treatment of shoulder pathological conditions, the exact anatomical location of Varma points and the appropriate method of its manipulation, certainly a key to further research articles.
RESUMO
Introducción: La fijación de las restauraciones indirectas es uno de los pasos más importantes, para conseguir una adecuada retención y sellado de la interfase entre el material restaurador y el diente. Objetivo: Evaluar la resistencia de unión al cizallamiento de diferentes agentes de fijación a dos aleaciones metálicas utilizadas en odontología. Métodos: Estudio experimental in vitro. Cien especímenes de aleaciones de metales base, 50 de níquel-cromo y 50 de níquel-cromo-titanio fueron preparados y divididos de manera aleatoria en 5 grupos. Esta división se realizó acorde con el agente de fijación utilizado: sistema autograbante de dos pasos (Clearfil SE Bond; CSB), sistema adhesivo universal (Single Bond Universal; SBU), cemento resinoso autoadhesivo (Maxcem Elite; ME), ionómero de vidrio (IV) y fosfato de zinc (ZnPO). Posteriormente a la aplicación de cada agente de fijación, los especímenes tratados fueron almacenados en agua destilada por 24 h a 37 ºC y sometidos a un ensayo de resistencia de unión al cizallamiento. Resultados: La resistencia de unión al cizallamiento fue influenciada significativamente por el tipo de agente de fijación (p = 0,002) y el tipo de aleación utilizada (p < 0,001). La resistencia de unión al cizallamiento fue mayor, al utilizar el sistema Clearfil SE Bond, seguida de Single Bond Universal; las diferencias entre Maxcem Elite y el Fosfato de zinc no fueron significativas. Finalmente, el IV no mostró adhesión a ninguna de las aleaciones metálicas utilizadas. Conclusiones: El uso de Clearfil SE Bond aumentó la resistencia de unión de los cementos resinosos a las aleaciones metálicas(AU)
Introduction: The bonding of indirect restorations is one of the most important steps, in order to achieve adequate retention and sealing of the interface between the restorative material and the tooth. Objective: To evaluate the shear bond strength of different bonding agents to two metal alloys used in dentistry. Methods: In vitro experimental study. One hundred specimens of base metal alloys, 50 nickel-chromium and 50 nickel-chromium-titanium were prepared and randomly divided into 5 groups. This division was made according to the bonding agent used: two-step self-etching system (Clearfil SE Bond; CSB), universal adhesive system (Single Bond Universal; SBU), self-adhesive resin cement (Maxcem Elite; ME), glass ionomer (IV) and zinc phosphate (ZnPO). After the application of each bonding agent, the treated specimens were stored in distilled water for 24 hr at 37 ºC and subjected to a shear bond strength test. Results: Shear bond strength was significantly influenced by the type of bonding agent (p = 0.002) and the type of alloy used (p < 0.001). Shear bond strength was highest when using the Clearfil SE Bond system, followed by Single Bond Universal; the differences between Maxcem Elite and Zinc Phosphate were not significant. Finally, IV did not show adhesion to any of the metal alloys used. Conclusions: The use of Clearfil SE Bond increased the bond strength of resinous cements to metallic alloys(AU)
Assuntos
Humanos , Colagem Dentária/métodos , Cemento DentárioRESUMO
Abstract Objective The present study aimed to assess the association between anxiety and depression symptoms in patients with adhesive capsulitis. Methods This was a cross-sectional study carried out in a single center from a tertiary hospital with patients presenting with secondary adhesive capsulitis. The control group did not have shoulder disease, thyroid disease, anxiety, and/or depression. The instrument used was the Hospital Anxiety and Depression Scale (HADS). An analysis of covariance compared HADS scores between groups. The significance level was 5%. Results The final sample consisted of 17 patients (case group) and 27 (control group). The Shapiro-Wilk test revealed normal distribution (p> 0.05). A HADS score > 0.70 (Cronbach alpha) was reliable and presented good internal consistency. Patients with adhesive capsulitis reported "doubtful" (average/standard deviation = 8.88/4.50) "anxious symptoms" (p= 0.019) but no "depressive symptoms" (average/standard deviation = 6.41/3.69), despite p= 0.015. Conclusion There is a "doubtful" positive association between anxiety symptoms and adhesive capsulitis but a negative association with depressive symptoms.
Resumo Objetivo Avaliar a associação entre sintomas ansiosos e depressivos em pacientes com capsulite adesiva. Métodos Trata-se de um estudo transversal realizado em centro único de um hospital terciário com pacientes portadores de capsulite adesiva secundária. O grupo controle não apresentava doença do ombro, tireoidopatias e nem ansiedade e/ou depressão. O instrumento utilizado foi a escala hospitalar de ansiedade e depressão. A análise da covariância foi utilizada para comparação dos escores do Hospital Anxiety and Depression Scale (HADS, na sigla em inglês) entre os grupos. O nível de significância foi de 5%. Resultados A amostra final foi de 17 pacientes (caso) e 27 (controle). Os dados amostrais apresentaram distribuição normal por meio do teste de Shapiro-Wilk (p> 0,05). A instrumento HADS com pontuação > 0,70 (alfa de Cronbach) se mostrou confiável e com boa consistência interna. Os pacientes com capsulite adesiva, no quesito "sintomas ansiosos" (p= 0,019), relataram sintomas no patamar de "duvidosos" (média/desvio padrão = 8,88/4,50). Eles não apresentaram "sintomas depressivos" (média/desvio padrão = 6,41/3,69), apesar do p= 0,015. Conclusão Existe uma associação positiva "duvidosa" entre sintomas ansiosos e capsulite adesiva, mas negativa para sintomas depressivos.