Clinical analysis of skeletal malocclusion, axial inclination in patients with short root anomaly of the maxillary central incisors / 口腔疾病防治

Objective @#To investigate the prevalence and distribution of skeletal malocclusion and axial inclination of the maxillary central incisors in short root anomaly (SRA) patients in Kunming city, to provide some reference and guidance for SRA patients′ clinical diagnosis and treatment and prevention in SRA patients. @*Methods@#A total of 1 000 cases were randomly selected from the CBCT database of patients admitted to the author′s hospital from January 2011 to July 2019, and a retrospective analysis was performed. A total of 27 patients with SRA were diagnosed (SRA group).The control group, consisted of 100 randomly selected patients from non-SRA patients. According to the clinical data and cephalometric data, skeletal malocclusion was divided into three subgroups: Class I skeletal malocclusion, Class II skeletal malocclusion and Class Ⅲ skeletal malocclusion. Additionally, the axial inclination of the central incisors was divided into three subgroups: the lingual inclination group, labial inclination group and normal inclination group. The two groups each according to sex, skeletal malocclusion and types of axial inclination of the maxillary central incisors were discussed. @*Results @# The prevalence rate of SRA in the selected population was 2.7%, and the prevalence of SRA in females was 3.67% (21/572) , which was higher than that in males by 1.4% (6/428), and was significantly different between sexes (χ2=4.562, P=0.033). There was a significant difference between SRA patients and control group in terms of skeletal malocclusion (χ2=8.710, P=0.013). Class Ⅲ skeletal malocclusion was the main type of skeletal malocclusion in SRA. There was a significant difference between SRA patients and control group in terms of the axial inclination of the maxillary central incisors (χ2=16.75,P<0.001). Lingual inclination of the maxillary central incisors was the main type of axial inclination of the maxillary central incisors in SRA. @*Conclusion@#There is a certain correlation between class Ⅲ skeletal malocclusion and lingual inclination of the maxillary central incisors and SRA, and the root-crown ratio and root shape of these patients should be evaluated before orthodontics are implemented.

Fracture strength of the IPS empress crown : the effects of incisal reduction and axial inclination on upper canine / 대한치과보철학회지

PURPOSE: The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction (2.0mm, 2.5mm, 3.0mm) and axial inclination (4degrees., 8.degrees, 12degrees.) of the upper canine. MATERIALS AND METHODS: After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and the universal testing machine was used to measure the fracture strength. RESULTS: 1. The fracture strength of the ceramic crown with 3.0mm depth and 12degrees inclination was the highest (839N). Crowns of 2.0mm depth and 12degrees inclination had the lowest strength (559N). 2. There was no significant difference in the fracture strength by axial inclination in the same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

Fracture strength of the IPS empress crown: The effect of occlusal using depth and axial inclination on lower first molar / 대한치과보철학회지

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination (4degree, 8degree, 12degree) of the lower First Molar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan). The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine(Zwick Z020, Zwick, Germany)was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 2.5mm depth and 12degree inclination was the highest (1789 N). Crowns of 1.5 mm depth and 4degree inclination had the lowest strength (1091 N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth. Size of fragment was affected by the amount of occlusal reduction.

Fracture Strength Of The Ips Empress Crown: The Effect Of Occlusal Depth And Axial Inclination On Lower Second Premolar / 대한치과보철학회지

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth(1.5mm, 2.0mm, 2.5mm) and axial inclination(4 degrees, 8 degrees, 12 degrees) of the lower second premolar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement. The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine was used to measure the fracture strength. The results of this study were as follows: 1. The fracture strength of the ceramic crown with 2.5mm depth and 12 degrees inclination was the highest (1284 N).Crowns of 1.5mm depth and 8 degrees inclination had the lowest strength (951N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.

FRACTURE STRENGTH OF THE IPS EMPRESS CROWN:THE EFFECT OF OCCLUSAL DEPTH AND AXIAL INCLINATION ON UPPER FIRST PREMOLAR CROWNS / 대한치과보철학회지

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination (4degree, 8degree, 12degree) of the upper first premolar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results were : 1. The fracture strength of the ceramic crown with 2.5mm depth and 12degreeinclination was the highest (630N). Crowns of 1.5mm depth and 4degreeinclination had the lowest strength(378N). There were no significant differences of the fracture strength by axial inclination in same occlusal depth group. 2. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.

A cephalometric study on mesiodistal axial inclination of posterior teeth in open bite and deep bite / 대한치과교정학회지

For the purpose of investigating mesiodistal axial inclination of posterior teeth in normal occlusion group, open bite and deep bite group and investigating the correlationship between the axial inclination of posterior teeth and overbite of anterior teeth, a cephalometric study was performed on the subjects consisted of normal occlusion group(40), open bite group(71 : Angle's Class I 21, Class II, division 1 25, Class III 25) and deep bite group(64 : Angle's Class I 23, Class II, division 1 21, Class III 20). Mesiodistal axial inclination of posterior teeth to occlusal, mandibular and palatal plane were measured. The findings of this study were as follows: 1. Upper and lower posterior teeth were more mesially inclined to occlusal plane in open bite group than in deep bite group. 2. Lower posterior teeth were more mesially inclined in deep bite group than in open bite group in Angle's Class II, division 1 malocclusion but there were no significant differences in Angle's Class I and Class III malocclusion. 3. There was no significant correlationship between the axial inclination of posterior teeth to each plane and overbite of anterior teeth in open bite group. 4. There was a significant correlationship between the axial inclination of upper and lower second premolar to occlusal plane and overbite of anterior teeth in Angle's Class I, Class II, division 1 and Class III malocclusion.