Reabsorción radicular en premolares, posterior a ortodoncia de autoligado, utilizando tomografía computarizada

Este Estudio tuvo por objetivo determinar la incidencia de reabsorción radicular externa en premolares superiores e inferiores permanentes al finalizar el tratamiento de ortodoncia. Esta investigación fue realizada en pacientes entre 18 y 35 años que recibieron tratamiento de ortodoncia, sin extracciones, con técnica de autoligado en la ciudad de Guadalajara. Se consideraron 120 premolares, realizando mediciones longitudinales en las tomografías computarizadas de haz cónico al inicio y término del tratamiento. Utilizando el software Implant Viewer 3. Los valores registrados en el primer y segundo premolar superior tanto del lado derecho como izquierdo al inicio y término del tratamiento fluctuaron entre -4.946 y -7.801; p ≤ 0.0005 encontrándose diferencias estadísticas significativas. Mientras que en el primer y segundo premolar inferior tanto del lado derecho como izquierdo, fluctuaron entre -4.864 y -5.28; p ≤ 0.0005 encontrándose diferencias estadísticas significativas. Se concluye en este estudio que los dientes sometidos a movimientos durante el tratamiento de ortodoncia sufren modificaciones en el contorno de la raíz, cambios con consecuencias mínimas que no comprometen la funcionalidad del diente. Los premolares superiores presentaron mayores rangos de reabsorción radicular que los premolares inferiores.

The aim of this study is to determine the incidence of root resorption in permanent upper and lower premolars at the end of an orthodontic treatment. This research was carried out in patients aged between 18 and 35 years old who received orthodontic treatment, without extractions, with a self-ligating technique in the city of Guadalajara, Mexico. In this study, 120 premolars were considered, making longitudinal measurements with cone beam computed tomography at the beginning and the end of the treatment, using the Implant Viewer 3 software. The values recorded in the upper first and second premolars on both the right and left sides at the beginning and the end of the treatment fluctuated between -4.946 and -7.801; p ≤ 0.0005, finding statistically significant differences. In the lower first and second premolars on both the right and left sides, they fluctuated between -4.864 and -5.28; p ≤ 0.0005, also finding statistically significant differences. It is concluded that teeth subjected to movements during orthodontic treatment suffer modifications in the contour of the root, changes with minimal consequences that do not compromise their functionality. The upper premolars showed higher ranges of root resorption than the lower premolars.

Effect of lacteal products containing probiotic in the progression of tooth decay around orthodontic brackets

Objective: To evaluate the progression of caries around orthodontic brackets after the enamel has been exposed to lacteal products containing probiotics. Methods: Orthodontic brackets were bonded to the enamel surfaces. The test specimens were randomly divided into six groups: G1-negative control; G2-positive control, exposed to culture environment only (without microorganisms); G3-exposed to the cariogenic environment and the fermented cow's milk without probiotic; G4-exposed to the cariogenic environment and fermented cow's milk with probiotic; G5-exposed to the cariogenic environment and yogurt without probiotic; and G6-exposed to the cariogenic environment and yogurt with probiotic. The groups were placed in brain heart infusion medium, supplemented with 2% sucrose and with 1x106 cells/ml of Streptococcus mutans and Streptococcus salivarius (ATCC). The Shapiro-Wilk, Levene, Student t, Kruskal-Wallis, and Mann-Whitney tests were used. Results: all groups exposed to the ATCC strains showed lower final microhardness, compared to the negative control (p0.05). Conclusions: Lacteal products are not able to prevent the progression of caries around orthodontic brackets.

Comparación Morfológica de Zonas de Inserción de Miniplacas Ortodóncicas en la Región Mandibular entre Edad, Sexo, Biotipo y Clase Esqueletal

El manejo del anclaje en los tratamientos de ortodoncia ha sido un reto constante, por lo que la utilización de miniplacas aparece como un rescate a esta interrogante. Determinar las diferencias morfológicas en la zona de inserción de miniplacas ortodóncicas en las regiones anterior y posterior mandibular, comparandolas entre edad, sexo, biotipo y clase esqueletal. Se estudiaron 40 registros de cone-beam de pacientes y se realizaron mediciones de grosor del hueso, donde se identificaron los sitios que permitan posicionar una miniplaca y fueron comparados entre sexo, grupos etarios, biotipo y clase esqueletal. Se observó diferencias significativas entre hombres y mujeres a nivel anterior mandibular, en los hombres se observaron mayores grosores óseos y corticales. No se observaron diferencias significativas entre pacientes adultos y jóvenes a nivel anterior mandibular, pero sí hubo diferencias a nivel mandibular posterior. La zona 3 mm debajo del 2do molar no es una zona confiable para la inserción de mini placas, ya que muchos de los pacientes no presentaban hueso en esa zona. Las miniplacas son un recurso seguro de anclaje las cuales deben ser adaptadas a cada paciente.

The anchorage management in orthodontic treatments has been a constant challenge, the use of miniplates may be a viable solution to this query. The objective of this study was to determine the morphological differences in the area of insertion of orthodontic miniplates in the anterior and posterior mandibular regions, comparing them between age, sex, biotype and skeletal class. In this analysis 40 cone-beam records of patients were studied, bone thickness measurements were carried out, the sites that allowed the positioning of a miniplate were identified and compared between sex, age groups, biotype and skeletal class. Significant differences were observed between men and women at the anterior mandibular level, in men greater bone and cortical thicknesses were observed. No significant differences were observed between adult and young patients at the anterior mandibular level, but there were differences at the posterior mandibular level. The area 3 mm below the 2nd molar was not a reliable area for the insertion of mini plates, since many of the patients had no bone in that area. Miniplates are a safe anchoring resource which must be adapted to each patient.

Protocolo BAMP: Reporte de Caso Clínico

El presente reporte tiene como objetivo presentar de manera secuencial y visual la protracción maxilar de un paciente clase III esqueletal, utilizando el protocolo BAMP. Una vez realizado el análisis clínico del caso se decidió realiza un tratamiento ortopédico a través del uso de miniplacas de titanio con elásticos intermaxilares de clase III siguiendo el protocolo BAMP, junto a un tratamiento ortodóncico dento alveolar con aparatología fija bimaxilar prescripción Roth 0.22" Mini sprint forestadent. Se observa el éxito del enfoque interceptivo utilizando el protocolo BAMP. Este enfoque logró reducir tanto el tiempo como la complejidad del tratamiento ortodóncico, y también disminuyó la necesidad de someterse a una cirugía ortognática en la edad adulta. El tratamiento BAMP, diseñado para ciertas edades y crecimiento, se demostró exitoso en un paciente de 12 años sin potencial de crecimiento. Las miniplacas como anclaje son efectivas para protracción maxilar en varios casos, aunque se necesita seguimiento y educación postquirúrgica. Se recomienda retirar las miniplacas cuando no sean necesarias, adaptando el protocolo a cada paciente. En resumen, el tratamiento con miniplacas es eficaz para corregir anomalías Clase III esqueléticas.

The present report aims to sequentially and visually present the maxillary protraction of a Class III skeletal patient using the BAMP protocol. After conducting a clinical analysis of the case, it was decided to perform orthopedic treatment using titanium miniplates with Class III intermaxillary elastics following the BAMP protocol, in conjunction with dentoalveolar orthodontic treatment using fixed bimaxillary appliances with Roth prescription 0.022" Mini Sprint Forestadent. The success of the interceptive approach using the BAMP protocol is observed. This approach managed to reduce both the time and complexity of orthodontic treatment and also decreased the need for orthognathic surgery in adulthood. The BAMP treatment, designed for specific ages and growth stages, proved successful in a 12-year-old patient without growth potential. Miniplates as anchorage are effective for maxillary protraction in various cases, although post-surgical follow-up and education are required. It is recommended to remove the miniplates when they are no longer necessary, adapting the protocol to each patient. In summary, miniplate treatment is effective in correcting Class III skeletal anomalies.

Accuracy of arch expansion with two thermoplastic materials in Invisalign® patients: EX30® and SmartTrack®

ABSTRACT Objective: The purpose of this retrospective study was to compare accuracy of arch expansion using two different thermoplastic materials in Invisalign aligners: EX30® (Polyethylene Terephthalate Glycol, or PETG) and SmartTrack® (polyurethane). Methods: The study sample comprised 65 adult patients consecutively treated with Invisalign from two private practices: group 1 - treated with EX30® (358 teeth) and group 2 - treated with SmartTrack® (888 teeth). Six hundred and twenty-three measurements were assessed in three digital models throughout treatment: model 1 - initial, model 2 - predicted tooth position, and model 3 - achieved position. Sixteen reference points per arch were marked and, after best alignment, 2 points per tooth were copied from one digital model to another. Linear values of both arches were measured for canines, premolars, and first molars: on lingual gingival margins and cusp tips of every tooth. Comparisons were performed by Wilcoxon and Mann-Whitney test. Results: Both termoplastic materials presented significant differences between predicted and achieved values for all measurements, except for the lower molar cusp tip in the SmartTrack® group. There is no statistical difference in the accuracy of transverse expansion between these two materials. Overall accuracy for EX30® aligners in maxilla and mandible were found to be 37 and 38%, respectively; and Smarttrack® presented an overall accuracy of 56.62% in the maxilla and 68.72% in the mandible. Conclusions: It is not possible to affirm one material expands better than the other. Further controlled clinical studies should be conducted comparing SmartTrack® and EX30® under similar conditions.

RESUMO Objetivo: O objetivo deste estudo retrospectivo foi comparar a acurácia na expansão da arcada utilizando alinhadores Invisalign com dois tipos de material termoplástico: EX30® (Polietileno Tereftalato Glicol, ou PETG) e SmartTrack® (poliuretano). Método: A amostra desse estudo incluiu 65 pacientes adultos tratados consecutivamente em dois consultórios particulares: grupo 1 - tratado com EX30® (358 dentes), e grupo 2 - tratado com SmartTrack® (888 dentes). Foram avaliadas 623 medidas em três pares de modelos digitais, ao longo do tratamento: modelo 1 - inicial, modelo 2 - posição dentária planejada, modelo 3 - posição alcançada. Foram marcados 16 pontos de referência por arcada e, após o bestfit, 2 pontos por arcada foram copiados de um modelo digital para o outro. Medidas lineares de ambas as arcadas foram aferidas para caninos, pré-molares e primeiros molares, localizadas na margem gengival lingual e ponta de cúspide de todos os dentes. Foram realizadas comparações usando os testes Wilcoxon e Mann-Whitney. Resultados: Ambos os materiais termoplásticos apresentaram diferenças significativas entre os valores planejados e alcançados em todas as medidas, exceto na ponta de cúspide dos primeiros molares inferiores do grupo SmartTrack®. Não houve diferença estatística entre esses dois materiais quanto à acurácia da expansão transversa. Em termos gerais, a acurácia dos alinhadores EX30® na maxila e mandíbula foi de 37% e 38%, respectivamente. O grupo SmartTrack® apresentou acurácia de 56,62% e 68,72% na maxila e mandíbula, respectivamente. Conclusões: Não foi possível afirmar que um material expande melhor que o outro. Estudos clínicos controlados futuros devem ser conduzidos comparando SmartTrack® e EX30® sob condições similares.

Accuracy of Invisalign® aligners in adult patients: a retrospective study of angular tooth movements

ABSTRACT Objective: This retrospective study aimed to assess the predictability of Invisalign® aligners regarding rotational, mesio-distal and buccal-lingual tip movements. Methods: Two materials were included in the analysis - EX30, used until 2013; and SmartTrack, in current use. The study comprised 56 adult patients treated with Invisalign Comprehensive. Data sample were assessed on three sets of digital models; model 1 - initial, model 2 - predicted, and model 3 - achieved. Sixty reference points were marked in each dental arch, and two reference planes assisted the superimposition. The degree of rotation, mesio-distal and buccal-lingual tip was obtained via trigonometric calculations, through a previously published validated method. The accuracy of outcomes was compared according to the types of tooth movement and teeth groups,and the influence of predetermined variables on movement accuracy was also investigated. Results: Rotation and mesio-distal tip did not present any significant difference when comparing EX30 and SmartTrack groups. Only buccal-lingual tip presented a significant difference, incisor and canine groups treated with EX30 aligners presented an increase in accuracy (p= 0.007 and p = 0.007, respectively). For each additional degree planned for rotation movements, there was an increase of 0.35° in the discrepancy, and an increase of 0.40° and 0.41° for mesio-distal and buccal-lingual tip, respectively. EX30 and SmartTrack discrepancies were compared by multilevel linear regression. Conclusion: EX30 aligners reached higher accuracy for buccal-lingual tip in anterior teeth. However, for rotation and mesio-distal tip, SmartTrack and EX30 are similarly accurate. The total amount of planned movement has a significant impact on accuracy rates, with a decrease in accuracy for every additional degree.

RESUMO Objetivo: Esse estudo retrospectivo teve como objetivo aferir a previsibilidade dos alinhadores Invisalign em relação aos movimentos de rotação e inclinações mesiodistal e vestibulolingual. Material e Métodos: Foram incluídos dois materiais nessa análise: EX30®, utilizado até 2013; e SmartTrack®, atualmente em uso. Esse estudo avaliou 56 pacientes tratados com Invisalign Comprehensive. Os dados foram avaliados em três pares de modelos digitais; modelo 1 - inicial, modelo 2 - planejado, e modelo 3 - alcançado. Foram marcados 60 pontos de referência em cada arcada, sendo a sobreposição realizada com auxílio de planos de referência. O grau de rotação e inclinações mesiodistal e vestibulolingual foi obtido por cálculos de trigonometria, usando um método validado publicado anteriormente. Os resultados foram comparados de acordo com os tipos de movimento dentário e grupos de dentes, também foi investigada a influência de variáveis predeterminadas na confiabilidade dos movimentos. Resultados: Os movimentos de rotação e inclinação mesiodistal não apresentaram diferença estatística, quando comparados os grupos EX30® e SmartTrack®. Somente a inclinação vestibulolingual apresentou diferença estatisticamente significativa, sendo que os grupos de incisivos e caninos tratados com alinhadores EX30® apresentaram um aumento na previsibilidade(p= 0,007 e p= 0,007, respectivamente). Para cada grau adicional planejado para movimento de rotação, ocorreu um aumento de 0,35° na discrepância, e aumentos de 0,40° e 0,41° para as inclinações mesiodistal e vestibulolingual, respectivamente. As discrepâncias entre EX30® e SmartTrack® foram comparadas por regressão linear multinível. Conclusão: Os alinhadores EX30® alcançaram maior previsibilidade para a inclinação vestibulolingual em dentes anteriores. No entanto, para rotação e inclinação mesiodistal, SmartTrack® e EX30® apresentaram previsibilidade similar. A quantidade total de movimento planejado apresenta influência significativa nas taxas de previsibilidade, com diminuição na acurácia para cada grau adicional.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

The efficiency of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization

ABSTRACT Objective: To assess the effectiveness of a customized distalizer with Variety SP® screws anchored on palatal miniscrews for upper molar distalization. Methods: Seventeen patients aged between 12.5 and 24 years underwent distalization with a customized distalizer. Lateral cephalogram and cast analysis were performed before and after distalization. Linear and angular parameters of the upper first molar, first premolar, and central incisor were assessed. Results: Distalization with the force passing near the center of resistance (CRes) of the upper first molars resulted in distal movement, with minimal distal tipping (2.8±0.45°, p<0.05). However, distalization passing occlusal to the CRes led to greater distal tipping (13.6±1.63°, p<0.05). Statistically significant spontaneous distal tipping and distal movement of the upper first premolars occurred, with a mean of 6.2±1.24° (p<0.05) and 0.68±0.34 mm (p<0.05), respectively. The positional change of the upper central incisors presented a mean of -0.23±0.1 mm (p>0.05) and 2.65±1.1° (p<0.05). Upper first molar intrusion was statistically significant, with a mean of 0.88±0.2 mm (p<0.05). Upper right and left first molars rotation towards palatal midline presented mean of 4.1±0.19° (p<0.05) and 3.4 ±0.1° (p<0.05), respectively. Additionally, the distance between upper right and left first molars increased significantly, with a mean of 2.54±0.01 mm (p<0.05). Conclusion: The study successfully demonstrated the efficiency of molar distalization without anchorage loss using a customized distalizer anchored on palatal miniscrews.

RESUMO Objetivo: Avaliar a eficácia de um distalizador personalizado com parafusos Variety SP® ancorado em mini-implantes palatinos para distalização de molares superiores. Métodos: Dezessete pacientes com idade entre 12,5 e 24 anos foram submetidos à distalização com o distalizador customizado. Análises das radiografias cefalométricas laterais e dos modelos de gesso foram realizadas antes e depois da distalização. Foram avaliados parâmetros lineares e angulares dos primeiros molares, primeiros pré-molares e incisivos centrais superiores. Resultados: A distalização com a força passando perto do centro de resistência (CRes) dos primeiros molares superiores resultou em distalização com inclinação mínima (2,8 ± 0,45°, p<0,05). Entretanto, a distalização passando oclusal ao CRes levou a uma maior inclinação para distal (13,6 ± 1,63°, p<0,05). Ocorreu inclinação distal espontânea e movimento distal estatisticamente significativo dos primeiros pré-molares superiores, com média de 6,2 ± 1,24° (p<0,05) e 0,68 ± 0,34 mm (p<0,05), respectivamente. A mudança de posicionamento dos incisivos centrais superiores apresentou média de -0,23 ± 0,1 mm (p>0,05) e 2,65 ± 1,1° (p<0,05). A intrusão dos primeiros molares superiores foi estatisticamente significativa, com média de 0,88 ± 0,2 mm (p<0,05). A rotação dos primeiros molares superiores direito e esquerdo em direção à linha média palatina apresentou média de 4,1 ± 0,19° (p<0,05) e 3,4 ± 0,1° (p<0,05), respectivamente. Além disso, a distância entre os primeiros molares superiores direito e esquerdo aumentou significativamente, com média de 2,54 ± 0,01 mm (p<0,05). Conclusão: O estudo demonstrou com sucesso a eficiência da distalização de molares sem perda de ancoragem utilizando um distalizador customizado ancorado em mini-implantes palatinos.

Methodological Quality of Systematic Reviews Addressing Orthodontic Interventions: Methodological Study

ABSTRACT Objective: To assess the methodological quality and characteristics of systematic reviews (SRs) of interventional studies in orthodontics and assess how the certainty of the evidence is reported using the GRADE approach. Material and Methods: Six electronic databases were searched, followed by a hand search of the reference lists of eligible studies (PROSPERO #CRD42020180852). The required study design was randomized and nonrandomized studies of interventions published between January 2019 and May 2020. The Assessing the Methodological Quality of Systematic Reviews (AMSTAR 2) tool was used for the quality appraisal of the included SRs. Paired reviewers independently screened the studies, extracted data, and appraised the methodological quality. Results: The study included 46 SRs; 19.5% had moderate to high methodological quality, and the remaining had low to critically low methodological quality. Fifty-four percent of the reviews assessed the certainty of evidence using the GRADE approach, and 34.8% followed all GRADE criteria. Conclusion: Most reviews had a good judgment of the AMSTAR2 items, although some critical items contributed to decreased overall quality. Half of the reviews used the GRADE approach to assess the certainty of the evidence, and this approach should be included in future systematic reviews of interventions.

Percentage of patients shifting to another treatment modality: An experience-guided decision

ABSTRACT Objective: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. Material and Methods: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner. Patients rated the questionnaire using a visual analogue scale, to assess variables (such as pain, ulcer etc) that impact various treatment modalities. Subsequently, patients from all groups provided feedback regarding their treatment experiences, and expressed their preference for an alternative modality. Intergroup comparison among the four groups was done using one-way analysis of variance with Tukey's HSD post-hoc test (p ≤ 0.05). Results: Patients who received lingual brackets reported higher levels of pain and ulceration, as compared to those who received clear aligners. All four groups showed statistically significant differences for ulcers during treatment (p ≤ 0.05). Of the 125 patients who received conventional metal brackets, 28% expressed a preference for clear aligner therapy, while 20% preferred ceramic brackets. In the lingual group, 56% of 125 patients preferred clear aligner therapy, and 8% preferred ceramic brackets to complete their treatment. In the ceramic group, 83% did not want to switch, whereas 17% desired to switch to clear aligner, while in aligner group no patient desired to switch. Conclusions: A higher percentage of patients from lingual brackets group chose to shift to clear aligners, followed by conventional metal brackets group and by ceramic brackets group, in this descending order. The clear aligner group demonstrated fewer issues than the other treatment modalities.

RESUMO Objetivo: Este estudo teve como objetivo avaliar a frequência com que pacientes ortodônticos decidiram mudar para outro tipo de aparelho ortodôntico, entre braquetes convencionais de metal, braquetes cerâmicos, braquetes linguais e alinhadores transparentes, com base em suas experiências pessoais de dor, aftas, mau hálito, problemas de higiene e dificuldades sociais. Material e Métodos: Esse estudo foi composto por pacientes que procuram tratamento ortodôntico. A amostra (n = 500; faixa etária = 19-25 anos) foi dividida igualmente em quatro grupos, com base na modalidade de tratamento: braquetes metálicos convencionais, braquetes cerâmicos, braquetes linguais e alinhadores transparentes. Os pacientes responderam a um questionário, usando uma escala visual analógica, para avaliar variáveis como dor e aftas, que impactam diferentes modalidades de tratamento. Posteriormente, os pacientes de todos os grupos forneceram feedback sobre suas experiências de tratamento e expressaram sua preferência por uma modalidade alternativa. A comparação intergrupos entre os quatro grupos foi feita usando análise de variância unidirecional com teste post-hoc HSD de Tukey (p ≤ 0,05). Resultados: Os pacientes que usaram braquetes linguais relataram níveis mais elevados de dor e aftas, em comparação com aqueles que usaram alinhadores transparentes. Todos os quatro grupos apresentaram diferenças estatisticamente significativas para aftas durante o tratamento (p ≤ 0,05). Dos 125 pacientes que usaram braquetes metálicos convencionais, 28% expressaram preferência pelo tratamento com alinhadores transparentes, enquanto 20% preferiram braquetes cerâmicos. No grupo com braquetes linguais, 56% dos 125 pacientes preferiram o tratamento com alinhadores transparentes e 8% preferiram braquetes cerâmicos para completar o tratamento. No grupo com braquetes cerâmicos, 83% não queriam trocar de tratamento, enquanto 17% desejavam mudar para os alinhadores transparentes; enquanto no grupo de alinhadores nenhum paciente desejou mudar. Conclusões: Uma porcentagem maior de pacientes do grupo com braquetes linguais optou pela mudança para alinhadores transparentes, seguido pelo grupo com braquetes metálicos convencionais e pelo grupo com braquetes cerâmicos, em ordem decrescente. O grupo de alinhadores transparentes demonstrou menos problemas do que as outras modalidades de tratamento.

Impact of fixed orthodontic retainers on oral health-related quality of life: a longitudinal prospective study

ABSTRACT Objective: The aim of the present study was to assess the impact of orthodontic retainers on oral health-related quality of life (OHRQoL) in the short and long terms after orthodontic treatment. Methods: Data from 45 patients up to three years after orthodontic treatment (T0) were analyzed. Patients were reassessed four years (T1) after T0. OHRQoL was measured using the OHIP-14 (Oral Health Impact Profile-14) questionnaire. The presence of a fixed retainer in the upper and/or lower arches, sex, and age were the predictive variables evaluated at T0 and T1. The occurrence of retainer fracture at T0 was clinically evaluated. Due to the COVID-19 pandemic, clinical examination on T1 was not possible, so the OHIP-14 and the self-perception of changes in teeth position and fracture of retainers were examined using an on-line questionnaire. Results: At the initial examination, the presence of upper retainers had a negative impact on quality of life (p=0.018). The OHIP-14 value increased significantly from T0 to T1 (p=0.014), regardless of the presence of retainers. The fracture or debonding of the retainer reported by the patient was the only variable that had a negative impact on OHRQoL (p=0.05). Conclusion: The use of fixed upper retainers suggests a negative impact on the quality of life of the orthodontic patient after the end of orthodontic treatment. This impact, however, is negligible in the long term, except when associated with fracture or debonding. This study emphasizes the need for continuous follow-up of orthodontic patients during the retention period.

RESUMO Objetivo: O objetivo deste estudo foi avaliar o impacto das contenções ortodônticas na qualidade de vida relacionada à saúde bucal (QVRSB) em curto e longo prazos após o tratamento ortodôntico. Métodos: Foram analisados dados de 45 pacientes até três anos após o tratamento ortodôntico (T0). Os pacientes foram reavaliados quatro anos (T1) após T0. A QVRSB foi mensurada usando o questionário OHIP-14 (Oral Health Impact Profile-14). A presença da contenção fixa nas arcadas superior e/ou inferior, o sexo e a idade foram as variáveis preditoras em T0 e T1. A ocorrência de quebra da contenção em T0 foi avaliada clinicamente. Em razão da pandemia da COVID-19, não foi possível o exame clínico em T1; assim, a autopercepção das alterações na posição dos dentes e a quebra ou descolagem das contenções foram registradas por meio de um questionário online. Resultados: No exame inicial, a presença da contenção superior apresentou um impacto negativo na qualidade de vida (p=0,018). Em T1, o valor de OHIP-14 aumentou significativamente em comparação a T0 (p=0,014), independentemente da presença das contenções. A quebra ou descolagem da contenção relatada pelo paciente foi a única variável que apresentou um impacto negativo na QVRSB (p=0,05). Conclusão: O uso de contenção fixa superior sugere um impacto inicial negativo na qualidade de vida do paciente após o fim do tratamento ortodôntico. Esse impacto, entretanto, é insignificante em longo prazo, exceto quando associado à descolagem ou quebra das contenções ortodônticas. Esse estudo enfatiza a necessidade de acompanhamento contínuo das contenções fixas após a finalização do tratamento ortodôntico.

Awareness of malocclusion and attitude towards orthodontic treatment among trainee dental surgery technicians in Nigeria

Objective: Malocclusion affects aesthetics, the physical, psychological and social life of a person. The aim of this study was to evaluate the awareness of malocclusion and attitude towards orthodontic treatment among trainee dental surgery technicians in Nigeria. Materials and Methods: This was a descriptive cross-sectional study carried out among 68 final year (sixty-eight) trainee dental surgery technicians in Nigeria. The research instrument was a self-administered close ended questionnaire. Data was analyzed using SPSS version 20. P value (P<0.05) was regarded as significant. Results: Sixty-one (89.7%) of the respondents were females, while 7 (10.3%) were males. Fifty-seven (83.8%) have heard of the term malalignment of teeth, 53 (77.9%) of the students think malalignment is due to external habits. 61 (89.7%) are aware that few teeth may have to be removed for proper positioning of irregular teeth and 51 (75.0%) were aware that the irregular teeth can be corrected even after 40 years of age. More females were aware of malocclusion and had positive attitude towards orthodontic procedures when compared to the males, but the difference was not statistically significant (P>0.05).Conclusion. Majority of the respondents in this study were aware of the term malalignment and had positive attitude towards orthodontic treatment. More females constituted the study population.

Research progress on the diagnosis and treatment of pediatric malocclusion combined with obstructive sleep apnea-hypopnea syndrome / 口腔疾病防治

@#Pediatric malocclusion is common in dentistry. Some children with malocclusion combined with obstructive sleep apnea-hypopnea syndrome (OSAHS) often fail to receive appropriate treatment due to a lack of multidisciplinary diagnosis and treatment. It can cause abnormal ventilation during sleep, affecting the central nervous system and cardiovascular development and even causing neurological and behavioral problems. Pediatric OSAHS is caused by the narrowing of the upper respiratory tract, characterized by specific facial bone characteristics and neuromuscular factors and correlated with malocclusion. Due to its diverse clinical manifestations and etiology, the diagnosis and treatment of pediatric OSAHS require an interdisciplinary, personalized, and specialized approach. Questionnaires and physical examinations can be used for preliminary screening. Moreover, children's stomatology and otorhinolaryngology examinations are the basis for disease diagnosis. Polysomnography (PSG) is currently the direct diagnostic method. There are various treatment methods for OSAHS in children, and for OSAHS caused by adenoid tonsil hypertrophy, adenoidectomy and tonsillectomy are the main treatments. Othodontic treatment including mandibular advancement and rapid maxillary expansion et al is also effective for OSAHS in children with malocclusion. Currently, there is limited research on the correlation between childhood malocclusion and OSAHS, and multidisciplinary combination therapy may improve the cure rate, but there is a lack of sufficient evidence. In the future, the pathogenesis of OSAHS should be further elucidated, and research on multidisciplinary combination therapy should be promoted to achieve early intervention and treatment for potential and existing patients.

Meta-analysis of the efficacy of invisible orthodontic appliances for maxillary molar distalization in adult patients / 口腔疾病防治

Objective@#To evaluate the clinical efficacy of invisible orthodontic appliances without brackets for the distal movement of maxillary molars to improve the ability of orthodontists to predict treatment outcomes.@*Methods@#Web of Science, Cochrane Library, Embase, PubMed, Wanfang Database, CNKI Database, and VIP Database were searched for studies investigating the efficacy of invisible orthodontic appliances for distal movement of maxillary molars in adult patients and published from database inception to August 1, 2023. A total of three researchers screened the studies and evaluated their quality and conducted a meta-analysis of those that met quality standards.@*Results@#This study included 13 pre- and postcontrol trials with a total sample size of 281 patients. The meta-analysis revealed no significant differences in the sagittal or vertical parameters of the jawbone after treatment when compared with those before treatment (P>0.05). The displacement of the first molar was MD=-2.34, 95% CI (-2.83, -1.85); the displacement was MD=-0.95, 95% CI (-1.34, -0.56); and the inclination was MD=-2.51, 95% CI (-3.56, -1.46). There was a statistically significant difference in the change in sagittal, vertical, and axial tilt of the first molar before and after treatment. After treatment, the average adduction distance of the incisors was MD=-0.82, 95% CI (-1.54, -0.09), and the decrease in lip inclination was MD=-1.61, 95% CI (-2.86, -0.36); these values were significantly different from those before treatment (P<0.05).@*Conclusion@#Invisible orthodontic appliances can effectively move the upper molars in a distal direction and control the vertical position of the molars. When the molars move further away, there is some degree of compression and distal tilt movement, which is beneficial for patients with high angles. The sagittal movement of incisors is beneficial for improving the patient's profile.

Class III camouflage orthodontic treatment in adult patient with anterior crossbite and abnormal functional shift: A case report

@#Skeletal Class III malocclusion is a complex malformation with a prevalence of 81.6% in Airlangga University Dental Hospital, distributed in patients aged 15-45 years old. Camouflage treatment of skeletal Class III malocclusion improves prognosis with a mild-to-moderate shift. This study aimed to discuss orthodontic camouflage as an option for adult patients with Class III malocclusion, emphasizing its indications, implications, and expected results. This report presents the case of a 17-year-old male patient with poor facial aesthetics associated with protruded chin, abnormal functional shift, and temporomandibular joint pain. The facial profile was concave with lower anterior multiple diastemas, mandibular lip protrusion, mandibular displacement, and anterior crossbite. This case was treated by camouflage therapy using straight wire appliance system combined with elastic class III. After 24 months of treatment during the pandemic, the mandibular displacement and the crossbite were corrected, the teeth were arched, the anterior crossbite fixed, and the profile became convex. Camouflage orthodontic treatment can be an effective management option to achieve functional occlusion, stability, and a satisfactory aesthetic impression in adult patients with mild to moderate skeletal Class III deformities, anterior cross bite, and functional shift.

Clinical analysis of orthodontic traction of impacted upper incisors / 口腔疾病防治

Objective@#To study the effect of orthodontic traction on the roots and periodontal soft and hard tissues of buried obstructed upper incisors.@*Methods@#This study was reviewed and approved by the ethics committee, and informed consent was obtained from the patients. From January 2018 to December 2022, 40 patients who underwent orthodontic traction on impacted upper incisors were selected; those whose contralateral homonymous apical foramen was not developed were placed in group A (23 cases), and those whose contralateral homonymous apical foramen was developed were placed in group B (17 cases). Software was used to measure the root length of the impacted upper incisors in groups A and B on cone beam CT (CBCT) images before and after traction and compare the changes in alveolar bone (alveolar bone width, labral bone plate thickness, and horizontal height of alveolar bone) and keratinized gingival width between each impacted upper incisor and the corresponding contralateral tooth immediately and one year after traction@*Results@#The root length of the impacted upper incisors increased after traction compared to before traction (P<0.05). The width of the alveolar bone at the completion of traction in group A was similar to that of the contralateral homonymous tooth (P>0.05), whereas the width of the alveolar bone at the completion of traction in group B did not reach that of the contralateral homonymous tooth, with a significant difference in width (P<0.05). Neither the labial bone plate height or width in group A or B reached that of the contralateral homonymous tooth after traction (P<0.05). The keratinized gingival width on the affected side was also significantly smaller than that on the contralateral side (P<0.05), but it was increased significantly in group A at the one-year follow-up visit (P<0.05).@*Conclusion@#Tooth traction is conducive to impacted upper incisor root growth, alveolar bone reconstruction and keratinized gingival growth but cannot produce complete symmetry with respect to the contralateral side.

Evaluation of condylar position in patients with malocclusion and changes in condylar position before and after orthodontic treatment using cone beam computed tomography / 口腔疾病防治

@#The functional health and stability of the oral and maxillofacial system is one of the basic goals of orthodontic treatment. Currently, it is believed that, in general, the condyle is located in the center of the joint fossa when the mandible is in an intercuspal position (ICP) in healthy normal people. At this time, the function of the temporomandibular joint (TMJ) is stable. Due to orthodontic tooth movement and subsequent occlusal changes, patients with malocclusion may experience related remodeling of the temporomandibular joint, especially changes in the position of the condyle. The position of the mandibular condyle is traditionally evaluated using a condylar position indicator. However, this method lacks consistency in obtaining condylar position changes. In recent years, in the clinical application of orthodontic treatment, cone beam computed tomography (CBCT) has become the first choice for examination. CBCT can accurately measure the interarticular space and determine changes in condylar position. This article reviews the CBCT assessment of condylar position and related research on condylar position changes in patients with malocclusion before and after orthodontic treatment. The literature review results indicate that there are differences in the condylar position of patients with different malocclusions, and the condylar position may also change before and after orthodontic treatment. With a lower radiation dose, CBCT has higher accuracy in evaluating the condylar position in patients with malocclusion who undergo orthodontic treatment, thus promoting further study of the mechanism of condylar position changes in patients with malocclusion in the future and providing more accurate and personalized guidance for patient treatment.

Avaliação dos Efeitos da Remoção da Resina Residual e do Polimento na Superfície do Esmalte após Descolagem do Braquete / Evaluation of the Effects of Residual Resin Removal and Polishing on the Enamel Surface after Bracket Debonding

Considerando o uso de brocas para remoção da resina residual após descolagem do braquete e a possibilidade de injúrias à superfície do esmalte após o uso dessas brocas, este trabalho teve como objetivo realizar um estudo experimental, para avaliar a variação do aspecto superficial do esmalte de forma qualitativa, por meio da avaliação com imagens topográficas do esmalte dentário, utilizando-se a Microscopia Eletrônica de Varredura (MEV), a qual permitiu ilustrar e avaliar a superfície do esmalte após a fase de polimento final, realizada por dois métodos: taça de borracha ou escova Robinson. Foram utilizados 25 dentes pré-molares humanos, obtidos a partir de exodontias em pacientes que procuraram voluntariamente o curso de Residência em Cirurgia da Clínica Odontológica Universitária da Universidade Estadual de Londrina. Os dentes foram divididos em quatro grupos: A, B, C e D, contendo 6 dentes cada, de acordo com as brocas utilizadas para a remoção do remanescente adesivo e o polimento escolhido, além de um dente como "controle". Foi avaliada a rugosidade superficial do esmalte após a remoção da resina e a superfície do esmalte após o polimento com as duas opções apresentadas. Os resultados mostraram que, por observação e inspeção, as brocas removeram a resina residual de todos os dentes, porém, causaram riscos e ranhuras, como evidenciado nas imagens em MEV. Concluiu-se que não houve diferença estatística entre os métodos de polimento e que ambos foram importantes para a redução das marcas abrasivas, proporcionando uma superfície mais lisa do esmalte.

Considering the use of specific burs to remove residual resin after bracket debonding and the possibility of injuries to the dental enamel after using these burs, this study aimed to verify the variation in the enamel surface appearance in a qualitative way and evaluation with topographic images of the dental enamel. The use of Scanning Electron Microscopy (SEM) allowed to illustrate and evaluate the enamel surface after the final polishing phase using two methods: rubber cup or Robinson brush. Twenty-five human premolar teeth were obtained from extractions in patients who voluntarily sought the Oral Maxillofacial Surgery Residency at the Dental School from the State University of Londrina; the teeth were divided into four groups A, B, C and D containing 6 teeth each according to the burs used to remove the remaining adhesive and the chosen polishing, in addition to one tooth as a "control". Dental enamel surface roughness was evaluated after resin removal and enamel surface after polishing with the two methods presented. The results showed that by observation and inspection, the burs removed residual resin from all teeth, however, caused scratches and grooves as evidenced in the SEM images. Based on the results, there was no statistical difference between the polishing methods, and both were important for the reduction of abrasive marks and provided a smoother enamel surface.

Contribution of Digital Technology to the Surgical Technique of Miniscrew Insertion: a Literature Review

Orthodontic miniscrews are used to achieve absolute anchorage. Their insertion technique is simple but must be precise to avoid intra- and postoperative complications. This study aimed to review the literature on the role of digital technology in the precise placement of miniscrews and to describe the different stages of the insertion guide manufacturing chain. The databases used were PubMed, Science Direct, and Google Scholar, including the following English descriptors: "Orthodontic Anchorage Procedures," "Cone Beam Computed Tomography." Digital technology improves the accuracy of miniscrew placement by using 3D imaging to assess the quantity and quality of bone and the proximity of anatomical structures in the area to be implanted. By combining 3D imaging with the new techniques of 3D printing and virtual planning, the orthodontist can obtain a personalized placement guide for the patient using computer-aided design and manufacturing techniques. A digitally-assisted miniscrew insertion system is a promising technique for precise and safe miniscrew insertion but cannot be used routinely. Therefore, large-scale studies are needed to map miniscrew insertion in different areas, considering ethnicity, gender, and different anatomical characteristics.

Prevalencia de Anomalías Dentomaxilares y Necesidad de Tratamiento Ortodóncico en Escolares del Pueblo Originario Rapa Nui / Prevalence of Dentomaxillary Anomalies and Need for Orthodontic Treatment in School Children of the Rapa Nui Native People

El objetivo de este estudio fue determinar la prevalencia de anomalías dentomaxilares y la necesidad de tratamiento ortodóncico en escolares pertenecientes al pueblo originario de Rapa Nui. Se realizó un estudio descriptivo, observacional, transversal y no probabilístico. Se evaluaron 85 alumnos entre primero básico y primero medio, entre los 6 y 16 años de edad, de dos colegios de Rapa Nui. Se realizó un examen clínico estandarizado, realizado por dos investigadores previamente calibrados, donde se completó una ficha clínica diseñada para el estudio. Para el análisis de las anomalías dentomaxilares se realizó un escaneo digital de la cavidad oral completa para su posterior análisis. De 85 estudiantes evaluados, 75 (88,2 %) se encontraban afectados por algún tipo de anomalía dentomaxilar en el plano sagital, vertical y/o transversal, independiente de su gravedad. Un 87,1 % de los estudiantes necesitan tratamiento ortodóncico según el Índice de Necesidad de Tratamiento Ortodóncico, de los cuales un 57,7, % se clasificó dentro de los rangos de moderado, grave y muy grave. Existe una alta prevalencia de anomalías dentomaxilares en los escolares pertenecientes al pueblo originario Rapa Nui, encontrándose por sobre las cifras nacionales como internacionales, lo cual da como resultado que la mayoría de los alumnos evaluados necesiten de algún tipo tratamiento ortodóncico, ya sea preventivo, interceptivo y/o correctivo.

The aim of this study was to determine the prevalence of dentomaxillary anomalies and the need for orthodontic treatment in schoolchildren belonging to the Rapa Nui native people. A descriptive, observational, cross- sectional and non-probabilistic study was carried out. Eighty- five students between first grade and first middle school, between 6 and 16 years of age, from two schools of Rapa Nui were evaluated. A standardized clinical examination was performed by two previously calibrated investigators, where a clinical record designed for the study was completed. For the analysis of dentomaxillary anomalies, a digital scan of the full mouth was performed for subsequent analysis. Of 85 students evaluated, 75 (88.2 %) were affected by some type of dentomaxillary anomaly in the sagittal, vertical and/or transversal plane, regardless of its severity. Some 87.1 % of the students needed orthodontic treatment according to the Orthodontic Treatment Need Index, of which 57.7 % were classified within the moderate, severe and very severe ranges. There is a high prevalence of dentomaxillary anomalies in schoolchildren belonging to the Rapa Nui native people, which is above the national and international figures, resulting in the majority of the students evaluated needing some type of orthodontic treatment, whether preventive, interceptive and/or corrective.