RESUMO
Polyetheretherketone (PEEK) as a new type of thermoplastic engineering plastic, has good biological activity, elastic modulus close to human cortical bone and radiation permeability, and has been widely used in medical field. This study aims to explore the safety and clinical efficacy of using 3D printing personalized PEEK materials to repaire scapular bone defects after bone tumor resection. A total of 6 patients who underwent the implantation of 3D printed PEEK scapular prosthesis from January 2020 to December 2021 in Yunnan Cancer Hospital were retrospectively analyzed. There were 3 males and 3 females, with age ranged from 14 to 52 years. There were 1 case of synovial sarcoma, 1 of Ewing's sarcoma, and 4 of chondrosarcoma. PEEK prosthesis was designed and fabricated based on CT data before surgery. Tumor resection and prosthesis replacement were performed under the premise of ensuring safe surgical boundaries, including 2 cases of total scapular prosthesis replacement and 4 cases of partial scapular prosthesis replacement. The operation time was 90-170 min, and the intraoperative blood loss was 100-400 ml. All 6 patients received satisfactory follow-up, with a tumor progression free survival time of 16-28 months. No tumor recurrence or metastasis was observed, and all patients survived tumor free. At last follow-up, the Constant-Murley shoulder joint score was a minimum of 62 points and a maximum of 68 points. The Japanese Orthopaedic Association's shoulder joint score was 63 points minimum and 78 points maximum. Computer-aided design 3D printing PEEK material prosthesis has certain advantages in the treatment of scapular tumor limb salvage. It has light weight, well adapted, relatively simple installation, good histocompatibility, and can obtain a better appearance and function of the shoulder joint after operation. It can become one of the options for limb salvage treatment of scapular tumor.
RESUMO
Objective: was to evaluate the retentive force, fatigue resistance and deformity of clasps made from two materials cobalt chromium and poly ether ether ketone (PEEK). Material and Methods: sixteen models were fabricated,each one having lower 1st molar. Models were divided into two groups according to materials,group I (GI) for cobalt chromium (Co-Cr) and group II (GII) for PEEK. Each testing models and its clasps were mounted inside universal testing machine, the retention was measured by applying withdrawal force to it by this machine at 5 mm/min. The Fatigue resistance is measured by the reduction in retention through repeated insertion and removal cycles using robota chewing simulator. Removal and insertion cycling of clasps was carried out for 360, 730, 1080, 1,440, 2,116 and 2,880 cycles (corresponding to 3, 6, 9, 12, 18 and 24 months of simulated clinical use of a RPD) to simulate the fatigue resistance test. Deformity was measured before and after each cycling using a digital micrometer. Statistical analysis was done by 2-way-ANOVA test to detect significance effects of each variable. Results: Retention and fatigue resistance, after 360, 730, 1080, 1,440, 2,116 and 2,880 cycles totally the difference between Co-Cr and PEEK groups was statistically non-significant (P = 0.0980> 0.05) where (Co-Cr > PEEK). Deformation results, regardless to evaluation time, Co-Cr group recorded statistically significant higher deformation mean value than PEEK group (P = 0.008 < 0.05).Regardless to material group, deformation mean value changed nonsignificantly by time (P = 0.2882> 0.05). Conclusion: PEEK clasps (1.0 mm in cross section diameter) engage 0.50 mm undercut provide sufficient retention nearly similar that of Co-Cr clasps.(AU)
Objetivo: o objetivo foi avaliar a força de retenção, a resistência à fadiga e a deformidade dos grampos fabricados com dois materiais diferentes: cromo-cobalto (Co-Cr) e poliéter-éter-étercetona (PEEK). Materiais e métodos: dezesseis modelos foram confeccionados, cada um com 1º molar inferior. Os modelos foram divididos em dois grupos de acordo com o material: grupo I Co-Cr e grupo II para PEEK. Cada modelo de teste universal e seus grampos foram montados em uma máquina de teste universal. A retenção foi medida aplicando força de retirada por esta máquina a 5 mm/min. A resistência à fadiga foi medida pela redução na retenção através de ciclos repetidos de inserção e remoção usando um simulador do ciclo de mastigação. O ciclo de remoção e inserção dos grampos foi realizado por 360, 730, 1080, 1.440, 2.116 e 2.880 ciclos (correspondendo a 3, 6, 9, 12, 18 e 24 meses de uso clínico simulado de um RPD) para simular o teste de resistência à fadiga. A deformidade foi medida antes e após cada ciclo, usando um micrômetro digital. A análise estatística foi realizada pelo teste ANOVA de 2 fatores para detectar os efeitos de significância de cada variável. Resultados: A retenção e a resistência à fadiga após 360, 730, 1080, 1.440, 2.116 e 2.880 ciclos entre os grupos Co-Cr e PEEK não mostrou diferença estatisticamente significativa (p = 0,0980> 0,05), onde (Co-Cr> PEEK). Para os resultados da deformação, independentemente do tempo de avaliação, o grupo Co-Cr registrou um valor médio de deformação maior, com diferença estatística significativa, quando comparado com o grupo PEEK (p= 0,008 < 0,05). Independentemente do grupo de material, o valor médio da deformação foi alterado de forma não significativa pelo tempo (p= 0,2882> 0,05). Conclusão: os grampos PEEK (1,0 mm de diâmetro da seção transversal) engatam 0,50 mm retenção quase semelhante à dos grampos Co-Cr (AU)
Assuntos
Resinas Sintéticas , Ligas de Cromo , Prótese ParcialRESUMO
Aim: This study was conducted aiming to optimize the selection of bar material that can minimize stresses on mandibular bone. Subjects and Methods: One finite-element model was created under ANSYS environment to evaluate the use of different materials as a bar-manufacturing material in mandibular implant-supported overdenture (OD). Model components were created on engineering computer-aided design software and then assembled under the finite-element package. A force of 200 N was unilaterally and vertically applied on the left second premolar area. Results: Within these study conditions, the polyether ether ketone bar produced the lowest Von Mises stress on OD and the maximum value of deformation. Stainless steel bar produced the maximum OD total deformation. Conclusions: Cortical and spongy bones are not sensitive to the bar material. Increasing bar material stiffness increases Von Mises stresses in the bar itself and reduces its total deformation, in what is called overconstrained system.
RESUMO
Objective: To investigate the effectiveness of stand-alone MC+polyether-ether-ketone (PEEK) Cage (single blade type) in anterior cervical double-level fusion for more than 2 years follow-up. Methods: A clinical data of 30 patients who were treated with anterior cervical fusion surgery with stand-alone MC+PEEK Cage (single blade type) between January 2013 and December 2016 and followed up for more than 2 years, was retrospectively analyzed. There were 16 males and 14 females, aged from 34 to 72 years with an average of 52.2 years. There were 16 cases of cervical spondylotic myelopathy, 8 cases of cervical spondylotic myelopathy, and 6 cases of traumatic cervical disc herniation. The continuous double segments were C 4, 5, C 5, 6 in 12 cases and C 5, 6, C 6, 7 in 18 cases; and the disease duration ranged from3 days to 24 months (mean, 12 months). Postoperative neck hematoma and wound healing were observed; dysphagia was assessed by Bazaz system; and bone fusion was assessed by Suk method. Before operation, at 1 week after operation, and at last follow-up, the Japanese Orthopaedic Association (JOA) score was used to evaluate the neurological recovery; the cervical X-ray film was performed to record the cervical curvature (C 2-C 7 Cobb angle), the height of the intervertebral space of the fusion segment, and to judge the occurrence of the fusion Cage subsidence. Results: No complication such as neck hematoma, incision infection, or esophageal fistula was found, primary healing of incisions was obtained in all cases. All patients were followed up 24-72 months (mean, 46 months). Neurological symptoms such as limb numbness and pain gradually disappeared after operation; during the follow-up period, the cervical curvature could be effectively maintained; dysphagia and internal fixation related complications such as displacement of Cages were not found. All patients obtained bony fusion from 3 to 8 months with an average time of 4.3 months. Compared with preoperative ones, the JOA score, intervertebral space height, and Cobb angle of cervical spine were significantly improved at 1 week after operation and at last follow-up ( P0.05). Conclusion: The application of stand-alone MC+PEEK Cage (single card type) in anterior cervical fusion can provide early cervical stability, effectively maintain the physiological curvature of cervical spine and the height of fusion intervertebral space.