Draft genome sequence of a caprolactam degrader bacterium: Pseudomonas taiwanensis strain SJ9

Abstract Pseudomonas taiwanensis strain SJ9 is a caprolactam degrader, isolated from industrial wastewater in South Korea and considered to have the potential for caprolactam bioremediation. The genome of this strain is approximately 6.2 Mb (G + C content, 61.75%) with 6,010 protein-coding sequences (CDS), of which 46% are assigned to recognized functional genes. This draft genome of strain SJ9 will provide insights into the genetic basis of its caprolactam-degradation ability.

Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials

PURPOSE: This in vitro study intended to investigate the mechanical and thermal characteristics of Valplast, and of polymethyl methacrylate denture base resin in which different esthetic fibers (E-glass, nylon 6 or nylon 6.6) were added. MATERIALS AND METHODS: Five groups were formed: control (PMMA), PMMA-E glass, PMMA-nylon 6, PMMA-nylon 6.6 and Valplast resin. For the transverse strength test the specimens were prepared in accordance with ANSI/ADA specification No.12, and for the impact test ASTM D-256 standard were used. With the intent to evaluate the properties of transverse strength, the three-point bending (n=7) test instrument (Lloyd NK5, Lloyd Instruments Ltd, Fareham Hampshire, UK) was used at 5 mm/min. A Dynatup 9250 HV (Instron, UK) device was employed for the impact strength (n=7). All of the resin samples were tested by using thermo-mechanical analysis (Shimadzu TMA 50, Shimadzu, Japan). The data were analyzed by Kruskal-Wallis and Tukey tests for pairwise comparisons of the groups at the 0.05 level of significance. RESULTS: In all mechanical tests, the highest values were observed in Valplast group (transverse strength: 117.22 +/- 37.80 MPa, maximum deflection: 27.55 +/- 1.48 mm, impact strength: 0.76 +/- 0.03 kN). Upon examining the thermo-mechanical analysis data, it was seen that the E value of the control sample was 8.08 MPa, higher than that of the all other samples. CONCLUSION: Although Valplast denture material has good mechanical strength, its elastic modulus is not high enough to meet the standard of PMMA materials.

Reconstruction of critical sized calvarial defects by porous nano-hydroxyapatite/polyamide 6 composite with bone marrow mesenchymal stem cells in rat / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To evaluate the effects of the nano-hydroxyapatite/polyamide 6 (n-HA/PA6) on the proliferation and osteoblastic differentiation of rat bone marrow mesenchymal stem cells (BMSCs), and the feasibility of using both for constructing tissue engineered bone in the calvarias of rats with critical sized defects.</p><p><b>METHODS</b>The third passage of BMSCs were cultured in osteoblastic medium and seeded on the scaffolds of n-HA/PA6, the proliferation of the BMSCs was tested by MTT (3-{4,5-dimethylthiazol-2yl}-2,5-diphenyl-2H-tetrazolium-bromide) on scheduled dates, and the osteoblastic differentiation of the BMSCs were measured by alkaline phosphatase (ALP) staining. Furthermore, the scaffolds with or without BMSCs in rat calvarial defects, after 4 weeks, 8 weeks, and 16 weeks have been implanted. Histology and scanning electron microscope were used to test the bone healing in the different groups.</p><p><b>RESULTS</b>The BMSCs seeded on the n-HA/PA6 grew well, the proliferation of cells was not affected by the scaffold, and the staining of ALP was also positive. At 4 week and 8 week after implantation, the n-HA/PA6 with BMSCs showed more new bone formation on the surface of scaffolds, with a better osseointegration of implant and host bone when compared with the group of n-HA/PA6 without BMSCs. However, there was no significant difference between these two groups at 16 week.</p><p><b>CONCLUSION</b>The porous n-HA/PA6 has no negative effects on the proliferation and osteoblastic differentiation of rat BMSCs, and using BMSCs as seed cells and n-HA/PA6 as scaffolds is a good choice for constructing tissue engineered bone due to the enhanced new bone formation and osseointegration.</p>

Estudos sobre a toxicologia da ε - caprolactama: [revisão] / Studies on the toxicology of ε - caprolactam: [review]

A ε-caprolactama (CAP) é um monômero precursor de polímeros denominados nylon 6. Esses polímeros destinam-se à produção de tapetes, vestuário e materiais plásticos tais como equipamentos, sistemas e componentes automotivos, conectores, além de embalagens plásticas. Resíduos de CAP podem migrar de embalagens plásticas de nylon 6 para os alimentos. Diante disso, foi de interesse realizar uma revisão dos efeitos relativos à exposição à CAP e o seu impacto sobre a saúde humana. Estudos epidemiológicos indicam a possibilidade da CAP causar inflamações oculares e cutâneas, além de irritações no sistema respiratório. Pode ocorrer ainda hipotensão, taquicardia, palpitações, rinorréia, ressecamento nasal, efeitos geniturinários e sobre a reprodução como distúrbios nas funções menstrual e ovariana, e complicações no parto; além de problemas neurológicos e hematológicos. Estudos com animais são consistentes com tais relatos. Os estudos de genotoxicidade in vitro e in vivo por via oral e intraperitoneal mostram em sua grande maioria, resultados negativos, bem como ausência de efeitos carcinogênicos em ratos e camundongos e sobre o desenvolvimento e reprodução em ratos e coelhos.

ε -Caprolactam (CAP) is a precursor monomer of nylon 6 polymers. Nylon 6 is used in the manufacture of carpets, clothes and plastic materials, such as equipment, systems and automotive components, connectors and plastic packaging. CAP residues can migrate from nylon 6 plastic packaging to foods. Given this fact, this review was realized concerning the effects of CAP exposure and its impact on human health. Epidemiological studies indicate that CAP could cause ocular, cutaneous and respiratory irritations, as well as hypotension, tachycardia, palpitations, rhinorrhea, nose dryness, neurological and blood problems, and genitourinary and reproductive effects, such as alterations in ovarian-menstrual functions and pregnancy/birth complications. Animal studies are consistent with such reports; however, the majority of in vitro and in vivo genotoxicity studies by oral and intraperitoneal routes show negative results, including the absence of carcinogenicity in rats and mice and developmental and reproductive effects in rats and rabbits.

Experimental study on gelatin/polycaprolactam composite nanofiber scaffold in wound healing / 中华烧伤杂志

<p><b>OBJECTIVE</b>To explore the effects of the gelatin (Gt)/(polycaprolactam) PCL composite nanofiber scaffold on wound healing of full-thickness defect in rabbits.</p><p><b>METHODS</b>Sixteen rabbits were inflicted with full-thickness skin open wounds on the back, and they were divided into A group (with treatment of Gt/PCL nanofiber membrane, 8 wounds), B group (with treatment of PCL fiber membrane, 8 wounds), and C group (with treatment of vaseline gauze, 8 wounds), the wounds in A , B groups served as self controls. Wound healing time was recorded. Wound healing rates were calculated on 3, 7, 10 post operation day (POD). Wound specimens and their adjacent skin were examined histologically on 3, 7, and 10 POD.</p><p><b>RESULTS</b>There was obvious difference in wound healing time among A, B, C groups, and they were (18.2 +/- 1.3) d, (20.3 +/- 1.1) d, (22.0 +/- 0.6) d, respectively. Wound healing rate in A group was obviously higher than that in B, C group on 3, 7, 10 POD (P < 0.05). Compared with those in other groups, the proliferation of granulation tissue in dermis in A group was less, the epidermal cells were proliferated quickly, and collagen was arranged regularly.</p><p><b>CONCLUSION</b>Gt/PCL composite nanofiber membrane can promote wound healing of full-thickness skin defect in rabbits, which is an ideal material for tissue engineering.</p>

The inhibitive effect produced by local perfusion of tanshinone IIA nanoparticle on neointimal hyperplasia of rabbit carotid artery following intimal denudation / 生物医学工程学杂志

Tanshinone IIA nanoparticles were constructed and perfused in rabbit's right carotid after intimal denudation with ballon. Localization and retention at different time points of the coumarin-labeled drug nanoparticles were evaluated under laser confocal microscope. Nanoparticles were seen in the three layers of the cross-section artery. At 7 days, they were mainly deposited in the medial layer, while the deposition was generally observed in the adventitia and media at 14 days and 28 days. In the Tanshinone IIA nanoparticle study, a significant reduction of the neo-intimal hyperplasia was noted by comparing the intimal area and the intima-media ratio in the three groups. And the PLGA nanoparticles appeared to be fully biocompatible. As a result, the local administration of the nanoparticles with incorporated Tanshinone IIA showed not only the preventive effects, but aslo the high absorption and good biocompatability in the whole arterial wall.

BMP-2 gene carried by biodegradable scaffold and fibrinous gel for repairing segmental radial defect in rabbit / 生物医学工程学杂志

Adenovirus carrying BMP-2 gene, after being mixed with fibrinous gel, was siphoned off on biodegradable scaffolds (PLA/PCL). The composite was used to repair 1.5 cm long radius defect in rabbits. Four methods were in use in the experiments: Ad-BMP-2 plus fibrinous gel and PLA/PCL (Group A), reconstructed hBMP-2 plus fibrinous gel and PLA/PCL (Group B), Ad-Lacz plus fibrinous gel and PLA/PCL (Group C), and fibrinous gel and PLA/PCL (Group D). Results showed that the defects treated in Group A were repaired with much more new bone regenerated, bridged earlier and stronger than those in Group B 12 weeks after operation. The defects treated in the other two groups could not attain osseous tissue healing. BMP-2 gene carried by biodegradable scaffold and fibrinous gel is easy to conduct and has very strong osteoinduction ability. It is really a good method to repair segmental bone defects.

Comparison between gene therapy and gradual release carrier for bone morphogenetic protein-2 in repairing bone defects / 生物医学工程学杂志

To compare the effects between gene therapy and gradual release carrier for bone morphogenetic protein-2 (BMP-2) in repairing bone defects, bone defects for 15 mm were created.on the bilateral radius in rabbits and treated with four kinds of implantations, ie, composite of transgeneic MSCs and PLA/PCL (Group A), composite of MSCs and gradual release carrier for BMP-2 (Group B), composite of MSCs and PLA/PCL (Group C), and PLA/PCL alone (Group D). After 4, 8, and 12 weeks of the operations, X-ray, histological examination, biomechanics analysis, and bone density measurement were conducted. Results showed that both osteoblasts and mesenchymal cells displayed strongly positive expression of BMP-2 in Group A after 4 weeks of the operation, the speed and quality of bone formation in Group A were much better than those in Group B. After 12 weeks of the operations, bone defects were completely repaired in Group A. BMP-2 gene therapy is really a good method to repair segmental bone defects.

Effect of high hydrostatic pressure on the barrier properties of polyamide-6 films

Little is known about the barrier properties of polymer films during high pressure processing of prepackaged foods. In order to learn more about this, we examined the influence of high hydrostatic pressure on the permeation of raspberry ketone (dissolved in ethanol/water) through polyamide-6 films at temperatures between 20 and 60°C. Permeation was lowered by increasing pressure at all temperatures. At 23°C, the increasing pressure sequence 0.1, 50, 100, 150, and 200 MPa correlated with the decreasing permeation coefficients P/(10(9) cm² s-1) of 6.2, 3.8, 3.0, 2.2, and 1.6. Analysis of the permeation kinetics indicated that this effect was due to a reduced diffusion coefficient. Pressure and temperature acted antagonistically to each other. The decrease in permeation at 200 MPa was compensated for by a temperature increase of 20°C. After release of pressure, the former permeation coefficients were recovered, which suggests that this `pressure effect' is reversible. Taken together, our data revealed no detrimental effects of high hydrostatic pressure on the barrier properties of polymer films.

Two Cases of Convulsion Associated With Caprolactam / 대한산업의학회지

Two young men were seen with nausea, vomiting, dermatitis, seizure after two-four days of occupational exposure to caprolactam, a nylon fiber precursor. There were no significant results in laboratory test, brain CT, EEG except leukocytosis, hyperglycemia. Caprolactam has been shown to induce convulsive disorder in experimental animal studios and Tuma et al (1981) described that one worker acutely exposed to caprolactam developed generalized tonic-clonic seizure with leukocytosis. The coincidence of typical skin lesion with otherwise unexplained generalized tonic-clonic seizure in those young man strongly suggests that caprolactam was causal agent.

Nylon-6 cylinders and a sponge-like derivative as supports for immobilizing trypsin

1. Two types of nylon-6 supports (small cylinders and a sponge-like derivative) were prepared for immobilizing enzymes. Nylon-6 beads were solubilized by immersion in 80 formic acid and then reprecipitated using two different types of non-solvent solutions (distilled water or a 1:1 acetone:water solution) giving rise to a sponge-like derivative and to a colloidal suspension, respectively. The latter was molded into a thin thread which was cut into small cylinders. 2. Trypsin (EC 3.4.21.4) was covalently bound to glutaraldehyde-activated nylon-6 cylinders as well as to the sponge-like derivative. The maximum (100) apparent initial enzymatic activity was found for the trypsin bound to small cylinders, while the initial activity of trypsin bound to the sponge-like material was 61 in comparison with that of trypsin-small cylinders, under the same conditions of enzyme immobilization reaction (1 g of nylon support and 5 ml of 1.3 mg/ml trypsin in 0.1 M sodium phosphate buffer, pH 8.5, at 10 degrees C for 18 h) and of enzymatic reaction (1 g of trypsin-nylon in a batch reactor, 2 ml of 0.7 w/v azocasein solution in 50 mM borate buffer, pH 8.5, at 37 degrees C, with shaking, for 1 h). However, the decrease of activity after enzyme immobilization was more conspicuous for the trypsin-small cylinders than for the trypsin-sponge. The former retained approximately 25 of its initial activity, while the latter retained approximately 67 of its initial activity, after seven cycles of utilization for 1 h, pH 8.5, at 37 degrees C and 8 days of storage, pH 8.5, at 4 degrees C in the presence of azocasein. 3. Scanning electron microscopy was performed to visualize the surface of the support after each step of the immobilization process. The electron micrographs show that the two types of nylon supports had a rough surface, which became rougher and full of craters after treatment with 5 N HCl. On the other hand, the partially hydrolyzed nylon surface acquired the appearance of Swiss cheese after treatment with 2.5 glutaraldehyde. After reaction with the enzyme molecules the surface became rougher again.

An evaluation of the Semmes-Weinstein 6.10 monofilament as compared with 6 nylon in leprosy patients.

In a previous study Birke and Sims (1986) identified the 5.07 (10 y) Semmes-Weinstein monofilament, as the most useful tool, in measuring protective sensation in the sole of the foot of leprosy patients. This study has demonstrated that the standard 6 Nylon being used in Karigiri, is as good as the monofilament, in assessing protective sensation in leprosy patients. However there is a need for standardising procedures for measuring sensory loss in leprosy patients.