Eugenol and tricaine methanesulfonate as anhestesics for the pearl cichlid

Anesthesia reduces the handling process duration and prevent fish injuries. The anesthetic effect and ideal concentrations of eugenol and tricaine methanesulfonate (MS-222) were tested for pearl cichlid (Geophagus brasiliensis) juveniles with an average weight of 4.4 g in water at 24ºC. The criterion for determining the optimal dose considered an induction time of one minute. Experiment 1 tested the concentrations of 25, 75, 150 and 300 mg L-1 of eugenol. The best results were obtained at doses of 150 and 300 mg L-1. Experiment 2 aimed to establish a more accurate result by testing the concentrations of 180, 210, 240 and 270 mg L-1, and led to an estimation of 217 mg L-1 of eugenol to induce anesthesia in one minute. Experiment 3 evaluated 200, 300, 400, 500 and 600 mg L-1 of tricaine, of which the concentration of 294 mg L-1 was estimated to induce anesthesia in one minute. No significant differences were observed for recovery times when using either of the anesthetics. No mortality was observed within 24 hours after the experiments for any concentration of the anesthetics. The present study recommends 217 mg L-1 of eugenol or 394 mg L-1 of tricaine for anesthesia of the pearl cichlid.

Solubility and bacterial sealing ability of MTA and root-end filling materials

ABSTRACT Objective To evaluate solubility and sealing ability of Mineral Trioxide Aggregate (MTA) and root-end filling materials. Material and Methods The materials evaluated were: MTA, Calcium Silicate Cement with zirconium oxide (CSC/ZrO2), and zinc oxide/eugenol (ZOE). Solubility test was performed according to ANSI/ADA. The difference between initial and final mass of the materials was analyzed after immersion in distilled water for 7 and 30 days. Retrograde cavities in human teeth with single straight root canal were performed by using ultrasonic tip CVD 9.5107-8. The cavities were filled with the evaluated materials to evaluate sealing ability using the bacterial leakage test with Enterococcus faecalis. Bacterial leakage was evaluated every 24 hours for six weeks observing the turbidity of Brain Heart infusion (BHI) medium in contact with root apex. Data were submitted to ANOVA followed by Tukey tests (solubility), and Kruskal-Wallis and Dunn tests (sealing ability) at a 5% significance level. Results For the 7-day period, ZOE presented highest solubility when compared with the other groups (p<0.05). For the 30-day period, no difference was observed among the materials. Lower bacterial leakage was observed for MTA and CSC/ZrO2, and both presented better results than ZOE (p<0.05). Conclusion MTA and CSC/ZrO2 presented better bacterial sealing capacity, which may be related to lower initial solubility observed for these materials in relation to ZOE.

Application of Taguchi design and Response Surface Methodology for improving conversion of isoeugenol into vanillin by resting cells of Psychrobacter sp. CSW4

For all industrial processes, modelling, optimisation and control are the keys to enhance productivity and ensure product quality. In the current study, the optimization of process parameters for improving the conversion of isoeugenol to vanillin by Psychrobacter sp. CSW4 was investigated by means of Taguchi approach and Box-Behnken statistical design under resting cell conditions. Taguchi design was employed for screening the significant variables in the bioconversion medium. Sequentially, Box-Behnken design experiments under Response Surface Methodology [RSM] was used for further optimization. Four factors [isoeugenol, NaCl, biomass and tween 80 initial concentrations], which have significant effects on vanillin yield, were selected from ten variables by Taguchi experimental design. With the regression coefficient analysis in the Box-Behnken design, a relationship between vanillin production and four significant variables was obtained, and the optimum levels of the four variables were as follows: initial isoeugenol concentration 6.5 g/L, initial tween 80 concentration 0.89 g/L, initial NaCl concentration 113.2 g/L and initial biomass concentration 6.27 g/L. Under these optimized conditions, the maximum predicted concentration of vanillin was 2.25 g/L. These optimized values of the factors were validated in a triplicate shaking flask study and an average of 2.19 g/L for vanillin, which corresponded to a molar yield 36.3%, after a 24 h bioconversion was obtained. The present work is the first one reporting the application of Taguchi design and Response surface methodology for optimizing bioconversion of isoeugenol into vanillin under resting cell conditions

Effect of endodontic sealer and resin luting strategies on pull-out bond strength of glass fiber posts to dentin

The aim of this study was to evaluate the influence of eugenolcontaining endodontic sealers and luting strategy on the pull-out bond strength of glass fiber posts to dentin. Sixty-four bovine incisors were randomly assigned into two groups of 32 specimens each for obturation procedure with gutta-percha only, or with Pulp Canal Sealer EWT. Subsequently, the roots were prepared for the fiber post Reforpost and all specimens of each endodontic sealing procedure were allocated to four groups (n=8), according to the strategies for post cementation: A) Single Bond 2 and RelyX ARC; B) All Bond 2 and C&B cement; C) All Bond 2 and RelyX ARC; D) Single Bond 2 and C&B Cement. The posts were cemented immediately after the endodontic treatment. The pull-out test was performed at a cross-head speed of 0.5 mm/min in a universal testing machine (EMIC). Data (Kgf) were submitted to a two-way ANOVA and Tukey test (p ≤ 0.05). The eugenol-based sealer did not influence the pull-out bond strength of fiber posts regardless of the luting strategy. RelyX ARC showed higher bond strength than C&B Cement when used with Single Bond 2 adhesive system, when the eugenol-based sealer was present. All Bond 2, when associated to all cements studied, promoted similar bond strength, regardless of the eugenol-containing endodontic sealer. In conclusion, eugenolcontaining sealer did not influence the pull-out bond strength values of the resin luting systems for glass fiber post cementation. The bond system and resin cement association from the same manufacturer had similar bond strength values for dentin.

O objetivo desse estudo foi avaliar a influencia de cimentos endodonticos a base de eugenol e estrategia de cimentacao resinosa na resistencia a tracao de pinos de fibra de vidro a dentina. Sessenta e quatro incisivos bovinos foram aleatoriamente divididos em dois grupos com 32 especimes para cada procedimento de obturacao, com o cimento a base de eugenol Pulp Canal Sealer EWT ou somente com guta percha pela tecnica termoplastificada. Apos, realizou-se o prepare do conduto radicular para o pino de fibra Reforpost e posteriormente, as amostras de cada procedimento obturador foram separadas em quarto grupos (n=8), considerando as estrategias para cimentacao do pino: A) Adper Single Bond 2 e RelyX ARC; B) All Bond 2 e C&B cement; C) All Bond 2 e RelyX ARC; D) Adper Single Bond 2 e C&B Cement. Os pinos foram imediatamente cimentados apos o tratamento endodontico. Dessa maneira, o teste de pull-out foi realizado a uma velocidade de 0.5 mm/min em maquina de ensaio universal (EMIC DL2000). Os dados (Kgf) A analise estatistica foi realizada pelos testes ANOVA de dois fatores e teste de Tukey (p ≤ 0.05). O cimento endodontico contend eugenol nao influenciou a resistencia de uniao a tracao (pull-out) dos pinos de fibra, independente da estrategia de cimentacao. O RelyX ARC ofereceu maior resistencia de uniao do pino a dentina, comparado ao C&B Cement quanto utilizado com o Adper Single Bond 2, na presenca do cimento endodontico contendo eugenol. O All Bond 2 quando associado a todos os cimentos estudados promoveram uma resistencia de uniao semelhante, independente do conteudo de eugenol na cimentacao endodontica. Em conclusao, o cimento endodontico a base de eugenol nao influenciou na resistencia a tracao de pinos de fibra a dentina. A associacao de sistema adesivo e cimento resinoso do mesmo fabricante apresentou valores de resistencia de uniao semelhantes na cimentacao de pinos de fibra.

Effect of temporary cements on the shear bond strength of luting cements

OBJECTIVE: The purpose of this study was to evaluate, by shear bond strength (SBS) testing, the influence of different types of temporary cements on the final cementation using conventional and self-etching resin-based luting cements. Material and Methods: Forty human teeth divided in two halves were assigned to 8 groups (n=10): I and V (no temporary cementation); II and VI: Ca(OH)2-based cement; III and VII: zinc oxide (ZO)-based cement; IV and VIII: ZO-eugenol (ZOE)-based cement. Final cementation was done with RelyX ARC cement (groups I to IV) and RelyX Unicem cement (groups V to VIII). Data were analyzed statistically by ANOVA and Tukey's test at 5 percent significance level. RESULTS: Means were (MPa): I - 3.80 (±1.481); II - 5.24 (±2.297); III - 6.98 (±1.885); IV - 6.54 (±1.459); V - 5.22 (±2.465); VI - 4.48 (±1.705); VII - 6.29 (±2.280); VIII - 2.47 (±2.076). Comparison of the groups that had the same temporary cementation (Groups II and VI; III and VII; IV and VIII) showed statistically significant difference (p<0.001) only between Groups IV and VIII, in which ZOE-based cements were used. The use of either Ca(OH)2-based (Groups II and VI) or ZO-based (Groups III and VII) cements showed no statistically significant difference (p>0.05) for the different luting cements (RelyX TM ARC and RelyX TM Unicem). The groups that had no temporary cementation (Groups I and V) did not differ significantly from each other either (p>0.05). CONCLUSION: When temporary cementation was done with ZO- or ZOE-based cements and final cementation was done with RelyX ARC, there was an increase in the SBS compared to the control. In the groups cemented with RelyX Unicem, however, the use of a ZOE-based temporary cement affected negatively the SBS of the luting agent used for final cementation.

Screening of natural phenolic compounds for potential to inhibit bacterial cell division protein FtsZ.

FtsZ plays an important role in bacterial cell division by polymerizing to form the Z ring at the site of cytokinesis. Phytochemicals are known to disrupt bacterial cell division through inhibition of FtsZ assembly. In the present study phytochemicals like eugenol, trans-cinnamic acid, 4-formyl cinnamic acid, naringenin and caffeic acid were were tested for their potential to inhibit cell division. Effect of these antimicrobial compounds on the growth of E. coli was determined and the inhibition of FtsZ assembly in vitro was investigated. The present study revealed trans-cinnamic acid as the most potent inhibitor of FtsZ assembly.

Estudo de espectros de ressonância magnética nuclear protônica e de carbono 13 de uma série de derivados de alilfenóis / Study of proton and carbon 13 nuclear magnetic ressonance spectra of an allylphenol derivatives series

Sais de amônio quaternários derivados de alilfenóis naturais foram sintetizados com o objetivo de se obter analgésicos periféricos, Eugenol, Ometileugenol e safrol foram submetidos a nitraçäo, reduçäo e permetilaçäo. As aminas também foram transformadas nos respectivos cloridratos. Os espectros de RMN1 H dos nitrocompostos, aminas, cloridratos de aminas, sais de amônio quaternários e dimetilaminas foram analisados, assim como os espectros de RMN13 C dos nitrocompostos e dos sais de amônio quaternários.