Expansión dentoalveolar predecible en Ortodoncia con uso de alineadores. Reporte de un caso clínico / Predictable dentoalveolar expansion in orthodontics with the use of aligners. Case Report

Este artículo describe el caso clínico de una paciente de 49 años. Clínicamente se observa Clase II molar derecha, Clase I molar izquierda y Clase I canina de ambos lados. La línea media superior se encuentra desviada hacia el lado izquierdo. Ausencia de piezas 35 y 45. Estrechez de maxilar superior con apiñamiento posterior izquierdo y derecho, apiñamiento anteroinferior. Mordida invertida posterior bilateral. Corredores bucales amplios. Sonrisa consonante, media. Para su tratamiento se indica una primera etapa de 13 alineadores con movimientos de traslación a vestibular y movimientos de torque coronovestibular, donde se planifica una expansión del maxilar superior de 10,99 mm. Al cabo de ocho meses de tratamiento, se observan 5,5 mm de expansión posterior logrados en esta primera etapa. Puede afirmarse que los alineadores son una herramienta efectiva para producir expansión del arco dental. La previsibilidad resultó razonable para el movimiento de expansión con el uso de alineadores.

This article describes the clinical case of a 49 year old female patient. Clinically, right molar class II, left molar class I, and canine class I are observed on both sides. Upper midline deviated to the left side, absence of teeth 35 and 45. Narrowness of the upper jaw with left and right posterior crowding, anteroinferior crowding. Bilateral posterior reverse bite. Negative space. Consonant, medium smile. For its treatment, a first stage of 13 aligners with buccal translation movements and coronobuccal torque movements is indicated, where an expansion of the upper jaw of 10.99 mm is planned. After 8 months of treatment, we can observe 5.55 mm of posterior expansion achieved in this first stage. We can affirm that aligners are an effective tool to produce expansion of the dental arch. Predictability was reasonable for the expansion movement with the use of aligners.

Análisis bidimensional de la permeabilidad de vías aéreas con el tamaño de senos maxilares y su relación con el desarrollo de la clase esqueletal en una población mexicana / Two-dimensional analysis of airway permeability with maxillary sinus size and its relationship with the development of skeletal class in a Mexican population

Comparar la permeabilidad de las vías aéreas y el tamaño de los senos maxilares en relación con la clase esqueletal. se midieron 90 radiografías lateral de cráneo, divididas en 3 grupos, comparando las 3 clases esqueletales, las cuales se determinaron con la medida ANB de Steiner, y estas a su vez en dos subgrupos que fueron hombres y mujeres, en las cuales se utilizó el análisis de McNamara para el análisis de vías aéreas y para el área del seno maxilar se tomaron dos medidas una antero-posterior y cefálica-caudal. Al comparar los hombres con las mujeres se identificó significancia estadística en vía área superior de clase II (p=≤0.017), vía aérea inferior de clase III (p=≤0.006). Al comparar las clases esqueletales en hombres se identificó diferencias en la vía aérea superior en las clases I vs III (p=≤0.05), inferior en la clase I vs III (p=≤0,001) y II vs III (p=≤0.044). Con respecto a mujeres se identificó significancia en la vía aérea superior al comparar la clase I vs II (p=≤0,043), vía aérea inferior en la clase II vs III (p=≤0.05), longitud del seno maxilar al comparar clase I vs II (p=≤0.017). Entre la clase I esqueletal y la clase II, el tamaño de los senos maxilares resulto menor en longitud en las mujeres de clase II esqueletal. Entre la clase I y clase III esqueletal en hombres, se encontró una longitud menor en la vía aérea superior e inferior en la clase I. Las vías aéreas resultaron en menor tamaño en sujetos de clase II.

SUMMARY: To compare the airway permeability and the size of the maxillary sinuses in relation to the skeletal class. 90 lateral skull radiographs were divided into 3 groups, comparing the 3 skeletal classes, which were determined with Steiner's ANB measurement, and these were once in two subgroups that were men and women, in any McNamara analysis was used for the analysis of airways and for the maxillary sinus area measurements were made an antero-posterior and cephalic-caudal. When comparing males with females, statistical significance was identified in the upper class II route (p=≤0,017), lower class III airway (p=≤0.006). At least skeletal classes in men, differences were identified in the upper airway in classes I vs III (p=≤0.05), lower in class I vs III (p=≤0.001) and II vs III (p=≤0.044). With respect to women, significance was identified in the upper airway when comparing class I vs II (p=≤0.043), lower airway in class II vs. III (p=≤0.05), maxillary sinus length to class I vs II (p=≤0.017). Between skeletal class I and class II, maxillary sinus size was shorter in length in skeletal class II women. Between class I and skeletal class III in men, a lower length was found in the upper and lower airways in class I. The airways were found to be smaller in class II subjects.

Treatment of a patient with class I malocclusion with moderate crowding and missing first molar: A case report

@#The most common occlusal feature of Class I malocclusion is crowding. Crowded and irregular teeth occur in a majority of the population and are the most common complication in adults. This is a case report of a 21-year-old woman with moderate crowding and a missing lower left first molar. The first permanent molars are sometimes unnoticed by the child or their parents and bring a risk of caries to the first permanent molar. Caries in the first molars that persist without any treatment will give a poor prognosis. Treatment was performed using a fixed orthodontic appliance with the extraction of the two upper and one lower first premolars.

Angle class II/2nd division: is there an alignment? / Classe II/2ª divisão de Angle: existe alinhamento?

Introduction: Interdisciplinary investigative study of the stomatognathic-cervical complex, necessary to understand the structure and biomechanics of this system in Angle Class I and II / 2nd Division participants. Objective: To evaluate alignment and position of cranial cervical structures on radiographs and their functional relationship with the stomatognathic system. Material and method: Trans Oral and Profile radiographs were submitted to biomechanical analysis, considered the linear and angular measurement of Atlas and Axis through the application included in the radiogram software. Result: We observed a significant difference in the angular measurements of vertical alignment between the Skull, Axis, and the Mandible (p = <0.001), and in the left joint between the Atlas and the Axis (AE: p = 0.011; SEA: p = 0.042). Among the linear measures of the distances between the Atlas and the Axis, the AOD distance presented statistics quite close to the level of significance (p = 0.0502), but above. There was no statistically significant difference in the other measures. Conclusion: In this study, the alignment between the Atlas and Axis cervical vertebrae and the mandible and angles of the atlanto-occipital joints are altered in Class II / 2nd Division participants. There is no difference in the size and distance of the Atlas and the Axis between the Classes.

Introdução: Estudo interdisciplinar investigativo do complexo cérvico-estomatognático, necessário para compreender a estrutura e a biomecânica desse sistema em participantes Classe I e II/2ª Divisão de Angle. Objetivo: Avaliar o alinhamento e a posição das estruturas crânio cervicais nas radiografias de participantes Classe I e II/2ª Divisão de Angle e sua relação funcional com o sistema estomatognático. Material e método: As imagens digitais Trans Oral e Perfil de participantes com maloclusão Classe I e II/2ª Divisão de Angle foram submetidas à medição linear e angular do crânio, mandíbula, Atlas e do Áxis através do software Advantage Workstation 4.6 (AW4.6 ext. 04). Resultado: Houve diferença significativa nas medidas angulares de alinhamento vertical entre o Crânio, Áxis e a Mandíbula (p = <0,001), e da articulação esquerda entre o Atlas e o Áxis (AE: p = 0,011; AAE: p = 0,042). Das medidas lineares das distâncias entre o Atlas e o Áxis, a distância AOD apresentou estatística bastante próxima do nível de significância (p=0,0502), porém acima. Não houve diferença significativamente estatística nas demais medidas avaliadas. Conclusão: Neste estudo, o alinhamento entre as vértebras cervicais Atlas e Áxis e a mandíbula e os ângulos das articulações atlanto occipitais se mostraram alterados nos participantes Classe II/2ª Divisão de Angle. Não há diferença significativa no tamanho e distância do Atlas e do Áxis entre as Classes.

Prevalence and extent of Alveolar dehiscence and fenestration in Class I hyperdivergent subjects with different buccolingual inclinations of maxillary molar teeth: a CBCT study

Buccolingual position of teeth could affect the prevalence of alveolar bone defects. Presence of alveolar defects may have a deleterious effect on orthodontic treatment. The aim was to assess the prevalence and extent of dehiscence and fenestration in Class I hyperdivergent subjects and correlate it with buccolingual inclinations(BL) of maxillary first molar teeth. Methods: This retrospective study involved 80 CBCTs of class I hyperdivergent subjects divided into two groups - group A (n=33) buccolingual inclination >9º and group B (n=47) buccolingual inclination <9º. Prevalence and extent of alveolar bone dehiscence and fenestrations were measured in CBCTs using OSIRIX Lite software. Descriptive statistics, Mann Whitney U test and Spearman correlation were done for evaluating intergroup differences and correlation with Buccolingual inclination. Results: Overall prevalence of dehiscence and fenestration in maxillary first molars was 60.95% and 5% respectively. In the buccal alveolar bone, prevalence of dehiscence was highest in group A (84.6%) for 16 and in the lingual alveolar bone prevalence of dehiscence was highest in group B (71.4%) for 26 . On intergroup comparison, the extent of lingual alveolar bone dehiscence (26) in group B was significantly higher (p value <0.05) than in group A. No significant correlation between the extent of dehiscence and fenestration with buccolingual inclination of molar teeth was noted. Conclusion: Molar teeth with BL inclinations of more than 9º had higher prevalence of dehiscence on the buccal side and molar teeth with BL inclinations less than 9 degrees had more dehiscence on the lingual side. But no significant correlation of BL inclination with prevalence and extent of dehiscence and fenestration was noted

Clinical study of different composite resin systems in Class I cavities (an 18-month randomized clinical trial) / Estudo clínico de diferentes sistemas de resina composta em cavidades de Classe I (um ensaio clínico randomizado de 18 meses)

Objective: this double-blind randomized clinical trial evaluate the clinical performance of Thermo-Viscous Bulk Fill composite, Self-Adhesive Flowable composite, and Filtek Bulk Fill Composites restorations in Class I cavities over a period of 18 months. Material and Methods: twenty individuals between the ages of 30 and 45 participated in this research. Each patient should have at least three occlusal Class I carious lesions on their molars. They were dispersed at random, with n=20 teeth representing each tested material. Group I (Futurabond M+ and VisCalor Bulk Fill which heated in a viscolar dispenser at 68 °C for 30s and placed in a 4 mm thickness), Group II (Fusio Liquid Dentin self-adhesive composite which put in a thin layer (1mm increment)), and Group III (Single Bond Universal and Filtek Bulk Fill Posterior composite which applied in 4 mm thickness without heating). Using (USPHS) criteria, all restorations were assessed clinically at baseline, 6 months, 12 months, and 18 months. Using an inverse replica, the marginal seal of the investigated restorations was further evaluated under SEM. Statistical analysis was performed with Chi-square test for all USPH parameters. Results: the three tested groups recorded a one hundred percent retention rate after 18 months follow up period. Concerning marginal adaptation, marginal discoloration, anatomical form, surface texture, and color matching, there was a significant difference (p˂0.05) between the three tested groups after 12 & 18 months. After 12 & 18 months, SEM analysis of the marginal seal revealed a statistically significant difference between the three groups. Conclusion: Bulk fill resin composite restorations showed satisfactory acceptable clinical performance after 18 months of clinical service compared to self-adhesive flowable composites, and Viscalor Bulk Fill composite demonstrated excellent results with considerable changes in marginal integrity as a consequence of thermal viscous technology and increased adaptability of restorations toward cavity walls and margins (AU)

Objetivo: este ensaio clínico randomizado duplo-cego avaliou o desempenho clínico de restaurações de resina Bulk Fill Termo-Viscosa, resina autoadesiva Flowable e Filtek Bulk Fill Composites em cavidades Classe I durante um período de 18 meses. Material e Métodos: 20 indivíduos com idade entre 30 e 45 anos participaram da pesquisa. Cada paciente deveria ter pelo menos três lesões de cárie oclusais de Classe I nos molares. Eles foram divididos aleatoriamente, com n=20 dentes representando cada material testado. Grupo I (Futurabond M+ e VisCalor Bulk Fill aquecido em dispensador viscolar a 68 °C por 30s e colocado em uma espessura de 4 mm), Grupo II (resina composta autoadesiva Fusio Liquid Dentin colocada em uma camada fina (incremento de 1 mm)) e Grupo III (resina composta Single Bond Universal e Filtek Bulk Fill Posterior aplicado em espessura de 4 mm sem aquecimento). Usando os critérios (USPHS), todas as restaurações foram avaliadas clinicamente no início, 6 meses, 12 meses e 18 meses. Usando uma réplica inversa, o selamento marginal das restaurações investigadas foi avaliado em MEV. A análise estatística foi realizada com o teste qui-quadrado para todos os parâmetros USPH. Resultados: os três grupos testados registraram uma taxa de retenção de cem por cento após um período de acompanhamento de 18 meses. Em relação à adaptação marginal, descoloração marginal, forma anatômica, textura da superfície e combinação de cores, houve uma diferença significativa (p˂0,05) entre os três grupos testados após 12 e 18 meses. Após 12 e 18 meses, a análise SEM do selamento marginal revelou uma diferença estatisticamente significativa entre os três grupos. Conclusão: as restaurações de resina composta Bulk Fill apresentaram desempenho clínico aceitável satisfatório após 18 meses de atendimento clínico em comparação com as resinas compostas fluidas autoadesivas, e a resina composta Viscalor Bulk Fill demonstrou excelentes resultados com mudanças consideráveis na integridade marginal, como consequência da tecnologia viscosa térmica e maior adaptabilidade de restaurações nas paredes e margens da cavidade (AU)

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Estudos radiográficos do osso hioide e da coluna cervical nas maloclusões Classe I e Classe II/2ª Divisão de Angle / Radiographic studies of the hyoid bone and cervical spine in Angle Class I and Class II/2nd Division malocclusions

Introduction Interdisciplinary investigative study of the stomatognathic-cervical complex, necessary to understand the structure and biomechanics of the hyoid bone and cervical spine in Class I and II / 2nd Division participants. Objective To analyze the position of the hyoid bone and the curvature of the cervical spine on lateral radiographs of participants with Class I and II/2nd Division Angle malocclusion. Material and method We evaluated the position of the hyoid bone from its alignment with the corresponding cervical vertebra. The presentation of curvature of the cervical spine was evaluated from the fourth cervical vertebra. Result There was a statistically significant difference in the position of the hyoid bone (p=0.027) between the classes, which was located at C3 in Class I and further down, between C3 and C5, in Class II/2nd Division. The cervical spine showed alterations in both classes, with an increase, rectification, and inversion of the curvature with no statistical difference between them (p=0.533). Conclusion In this study, the hyoid bone showed different positions in the malocclusions studied, however, poor posture of the cervical spine was common in both classes.

Introdução Estudo interdisciplinar investigativo do complexo estomatognático-cervical, necessário para compreender a estrutura e a biomecânica do osso hioide e coluna cervical em participantes Classe I e II/2ª Divisão de Angle. Objetivo Analisar a posição do osso hioide e da curvatura da coluna cervical nas radiografias em perfil de participantes com má oclusão Classes I e II/2ª Divisão de Angle. Material e método A posição do osso hioide foi avaliada a partir de seu alinhamento com a vértebra cervical correspondente. A apresentação da curvatura da coluna cervical foi determinada a partir da proximidade com a quarta vértebra cervical. Resultado Houve diferença estatística significativa na posição do osso hioide (p=0,027) entre as classes, que ficou situado em C3 na Classe I e mais abaixo, entre C3 e C5, na Classe II/2ª Divisão. A coluna cervical apresentou alterações em ambas as classes sem diferença estatística entre as mesmas (p=0,533), com aumento, retificação e inversão da curvatura. Conclusão Neste estudo, o osso hioide apresentou posições distintas nas más oclusões estudadas, no entanto, a má postura da coluna cervical foi comum em ambas as classes.

Correção da deficiência transversal maxilar utilizando o expansor de níquel-titânio LEAF Expander® com o protocolo para expansão lenta: relato de caso clínico / Correction of maxillary transverse deficiency using the LEAF Expander® nickel-titanium expander with the protocol for slow expansion: a case report

Este trabalho teve como objetivo o relato do caso clínico de uma paciente que compareceu à Faculdade de Odontologia de Araçatuba com características de classe I de Angle e deficiência maxilar transversal, no tratamento foi utilizado o expansor de níquel-titânio LEAF Expander®, fabricado pela Leone, na Itália. Trata-se aparelho que possui inúmeras vantagens por aumentar a adesão do paciente ao tratamento já que não necessita da ativação em domicílio, facilitar o andamento clínico, tendo em vista que o tratamento é menos doloroso e mais fácil que os outros expansores, aumentar a previsibilidade do tratamento, pois as forças contidas nas molas são constantes e pré-determinadas em laboratório (450g de força). Mediante a análise de modelos, documentações fotográficas e do estudo do caso clínico, concluiu-se que o tratamento realizado utilizando o protocolo padrão de expansão lenta da maxila apresentou-se como uma ferramenta inovadora e eficiente no tratamento da deficiência maxilar transversal(AU)

This study aimed to report the clinical case of a patient who attended the Faculty of Dentistry of Araçatuba with Angle class I characteristics and transverse maxillary deficiency. Leon, Italy. It is a device that has numerous advantages for increasing patient adherence to treatment since it does not require activation at home, facilitating clinical progress, given that the treatment is less painful and easier than other expanders, increasing predictability treatment, as the forces contained in the springs are constant and predetermined in the laboratory (450g of force). Through the analysis of models, photographic documentation and the study of the clinical case, it was concluded that the treatment performed using the standard protocol of slow maxillary expansion presented itself as an innovative and efficient tool in the treatment of transverse maxillary deficiency(AU)

Ortodoncia con alineadores y odontología restauradora en el paciente adulto / Orthodontics with aligners and restorative dentistry in adult patients

En los últimos años, el tratamiento de ortodoncia con alineadores ha ido ganando la atención del paciente adulto, que acude a la consulta en busca de tratamientos no solo estéticos sino, también, confortables. Esta situación favorece, a su vez, al odontólogo rehabilitador, quien frecuentemente plantea a sus pacientes la necesidad de realizar un tratamiento de ortodoncia previo a la rehabilitación integral. En estos pacientes, un tratamiento de ortodoncia con alineadores es, generalmente, mejor aceptado que un tratamiento con aparatología fija(AU)

In recent years, the orthodontic treatment with aligners has been gaining attention of adult patients, who go to our office in search of treatments that are not only aesthetic but also comfortable. This situation in turn favors the rehabilitation dentist, who frequently raises the need for his patients to undergo an orthodontic treatment prior to comprehensive rehabilitation. In these patients, an orthodontic treatment with aligners is generally better accepted than a treatment with fixed appliances(AU)

Management of a patient with angle class I Malocclusion with Anterior Crossbite and Maxillary Central Diastema caused by high attachment of the Maxillary Labial Frenulum

@#Maxillary Central diastema is common and normal for the growth and development of the anterior segment. If the central diastema persists after the eruption of the permanent cuspids, the orthodontist should clarify the etiology and establish a treatment plan. This case report discusses a 22-year-old woman with anterior crossbite and central diastema due to a high maxillary labial frenulum attachment. Treatment was performed using a fixed orthodontic appliance with a posterior bite raiser. Frenectomy was performed at the end of the orthodontic treatment.

Pubertal growth spurt peak in angle class I and II Malocclusions using cervical vertebrae maturation analysis in Deutero-Malay children

Background@#The incidence rate of Angle Class I and Class II malocclusions in mixed dentition is higher than Class III. In orthodontic interceptive treatment, it is necessary to identify pubertal growth spurt peak individually because the best growth modification could be obtained during this period. One of the methods in assessing the pubertal growth spurt peak is cervical vertebrae maturation (CVM), which is done using a lateral cephalometric radiograph. CVM evaluates potential growth and skeletal maturity by assessing cervical vertebrae anatomy. Identifying the duration of growth spurt peak on both malocclusion classes is the most pivotal aspect of optimizing remodeling and correction of children’s malocclusion. @*Objective@#Distinguishing the duration of pubertal growth spurt peak of children with Angle Class I and II malocclusions based on CVM analysis in Deutero-Malay children so that it can be used in determining optimal orthodontic treatment plan and timing in children with Class I and Angle II malocclusion for Deutero-Malay children. @*Methods@#Analytical observational with cross-sectional approach was applied using lateral cephalometric radiographic images from patients’ medical records attending or had attended orthodontic treatment in the Pediatric Dentistry Clinic, Airlangga University Dental Hospital, Surabaya, Indonesia, in 2014-2019 that met the inclusion criteria and were analyzed with Baccetti’s method of CVM analysis. This study involved 66 conventional lateral cephalometric photographs that were selected using total sampling. The data were analyzed using Independent T-Test and Mann Whitney U Test. @*Result@#The duration of pubertal growth spurt peak in Angle Class I and II malocclusions was 11 and 7 months, respectively. The age of onset for Class I with CS3 was 9 years and 5 months, while for Angle Class II malocclusion starts entering the stage at 10 years 3 months of age, while for CS4 skeletal maturity we found that the age of onset for subjects with Angle Class I and II were 11 years 2 months and 12 years 4 months, respectively. The average duration of the pubertal growth spurt peak in female and male patients was 11.3 months and 18.2 months, respectively. All of these results were statistically significant (p ≤ 0.001) and representative of the population, in this case, Deutero-Malays. @*Conclusion@#Four-month differences in the duration of pubertal growth spurt peak of children with Angle Class I and II were found. This may lead to a shorter treatment duration of 4 months in children with Angle Class II malocclusion when compared to children with Angle Class I malocclusion. Angle Class II malocclusion exhibit shorter pubertal growth spurt peak duration, which may account for the difference in mandibular growth on the two malocclusion classes.

Factors affecting the stability of maxillary extraction site closure

ABSTRACT Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

RESUMO Introdução: Um efeito colateral observado nos casos tratados com extrações é a instabilidade do fechamento ortodôntico do espaço. Objetivo: O objetivo do presente estudo foi investigar a influência da invaginação gengival, da presença de terceiros molares e do padrão facial na estabilidade do fechamento ortodôntico dos locais de extração na arcada superior. Métodos: Noventa e nove indivíduos (41 homens e 58 mulheres) com má oclusão de Classe I tratados com extração de quatro pré-molares foram avaliados. A reabertura dos locais de extração e as invaginações gengivais foram avaliadas nos modelos dentários digitalizados nos estágios pós-tratamento e um ano pós-tratamento (idade média de 16,1 anos). A presença dos terceiros molares foi avaliada em radiografias panorâmicas de um ano pós-tratamento, e o padrão facial (SN.GoGn) foi avaliado nas radiografias laterais iniciais. Análise de regressão logística múltipla foi utilizada para estimar a influência das variáveis independentes citadas na frequência de reabertura do espaço de extração. Resultados: A reabertura do espaço foi observada em 20,20% dos sujeitos um ano após a remoção do aparelho. Invaginações gengivais estiveram presentes em 25,73% dos quadrantes após a remoção do aparelho e em 22,80% após um ano pós-tratamento. O SN.GoGn pré-tratamento médio foi de 35,64 graus (DP = 5,26). Não foi observada influência significativa das três variáveis independentes sobre a instabilidade do fechamento do local de extração. Conclusões: A presença de invaginações gengivais, terceiros molares e padrão de crescimento facial não parece influenciar na reabertura dos locais de extração maxilar.

Effect of Conventional Versus Passive Self-Ligating Vestibular Appliances on Torque, Tip and Transverse Dental Changes in Patients Affected by Class I Malocclusion: A Retrospective Study

ABSTRACT Objective: To evaluate the effects of passive self-ligating appliances (PSLAs) and conventional ligating appliances (CLAs) during orthodontic treatment regarding torque, tip, and transversal dental changes. Material and Methods: Dental parameters were digitally acquired from pre- and post-treatment models of each subject belonging to two groups of patients treated with PSLAs (23 patients; 11 females and 12 males with a mean age of 14.2 ± 1.6 years) and CLAs (18 patients; 10 females and 8 males with a mean age of 14.3 ± 1.9 years), respectively. All subjects had Class I or slight Class II malocclusion (= 2mm), permanent dentition and no previous orthodontic treatment. After normality of data was assumed, a paired sample t-test rejected any side differences at T0 and, therefore, the data were grouped by tooth group. Statistical analyses were performed using a linear mixed-effect framework, assuming the appliance, time, and interactions as fixed effects and the tooth type as random effects. Finally, post-hoc effect analysis was used to contrast modeled marginal effects (p<0.05). Results: For both appliances, there is a general increase of both torque and transverse values at T1, especially for PSLAs. Tip shows a general reduction in the lateral sectors for both appliances is registered. The only significant statistical difference referred to appliances' efficacy is located to mandibular intermolar width. Conclusion: Both appliances have an expansive potential for both torque and transverse dental changes. No evident differences are detectable between appliances except for the rate of the mandibular intermolar width increase.

Cephalometric comparison of dentofacial parameters between Yemeni and Caucasian adults / Comparação cefalométrica de parâmetros dentofaciais entre adultos iemenitas e caucasianos

Objective: The purposes of our research were to establish cephalometric standards for Yemeni adults and to compare them with those of the Caucasians. Material and Methods: 100 Yemeni students (fifty males, mean age of 23.6 ± 2.1 years, and fifty female, mean age of 21.5 ± 3.1 years) with normal occlusions and well-balanced faces were involved in the study. Inclusion criteria were a class I occlusion with minor or no crowding, the whole teeth is present except third molars and no previous orthodontic, orthopedic or maxillofacial surgery treatment. Five angular and eighteen linear measurements were used for the skeletal, dental and soft tissue analysis. All participant's Lateral cephalometric radiographs were evaluated. The average values and standard deviations for all the angles and linear measurements were determined. The differences for each measurement between the Yemeni and Caucasian participants were calculated using unpaired t­tests. Results: Yemeni subjects had a more retrognathic mandibular positions (P< 0.05), protrusive mandibular incisors (P< 0.01), more protruded lip positions (P < 0.01), deeper mentolabial sulci (P< 0.01) and a steeper mandibular planes (P< 0.001) compared to the Caucasians. Yemeni females had a larger lower face height than Caucasian females (P< 0.001). Conclusions The study provides specific standards for Yemeni adults and shows that the Yemenis had different skeletal and dentoalveolar cephalometric standards in comparison with Caucasians (AU)

Objetivo: O objetivo de nossa pesquisa foi estabelecer padrões cefalométricos para adultos iemenitas e compará-los com os caucasianos. Material e Métodos: Cem estudantes iemenitas (cinquenta homens, idade média de 23,6 ± 2,1 anos, e cinquenta mulheres, idade média de 21,5 ± 3,1 anos) com oclusões normais e faces bem equilibradas foram envolvidos no estudo. Os critérios de inclusão foram: oclusão de classe I com pouco ou nenhum apinhamento, todos os dentes presentes, exceto terceiros molares e sem histórico de tratamento ortodôntico, ortopédico ou cirurgia maxilo-facial prévio. Cinco medidas angulares e dezoito lineares foram utilizadas para a análise esquelética, dentária e de tecidos moles. Todas as radiografias cefalométricas laterais dos participantes foram avaliadas. Foram determinados os valores médios e desvios padrão para todos os ângulos e medidas lineares. As diferenças para cada medição entre os participantes iemenitas e caucasianos foram calculadas usando testes t não pareados. Resultados: Os indivíduos iemenitas tinham posições mandibulares mais retrognáticas (P <0,05), incisivos inferiores protrusivos (P <0,01), posições dos lábios mais protuberantes (P <0,01), sulcos mentolabiais mais profundos (P <0,01) e planos mandibulares mais inclinados (P <0,001) em comparação com os caucasianos. As mulheres iemenitas tinham uma altura facial inferior maior do que as mulheres brancas (P <0,001). Conclusão:O estudo fornece padrões específicos para adultos iemenitas e mostra que os iemenitas apresentaram padrões cefalométricos esqueléticos e dentoalveolares diferentes em comparação com os caucasianos. (AU)

Anterior open bite treated with palatine crib: a case report with cephalometric, speech and electromyography analyses

This case report describes an interceptive treatment of anterior open bite (AOB) with fixed palatine grid using clinical, cephalometric, electromyographic and speech analysis data. Case report: An 8-year-old girl, Angle Class I malocclusion presenting AOB. The complete orthodontic documentation was obtained and the perioral muscles were evaluated using the electromyography during blowing, sucking and smiling activities, before and after treatment. Speech acoustic evaluation was performed through the frequencies of the formants to assess the position of the tongue. Results: The AOB was corrected in six months with reduction of vertical transpass, decrease of cephalometric Angles 1: NA and 1: NB and increase of interincisal angle. During the smile movement, it was possible to observe the decrease of the muscular activity of the superior orbicularis muscle and the increase of the muscular activity of the inferior orbicularis. In the blow movement, there was a tendency to decrease muscle activity. Opposite directions were observed at the time of installation of the grid in the frequencies of the formants. When the grid was removed, the tongue was lowered and posteriorized in relation to the installation time. When compared the final and initial moments, it was noted a predominance of tongue lower position, besides posteriorization in some vowels and anteriorization in others. Conclusion: After the use of the fixed palatine crib as an interceptive treatment for AOB, the bite was closed and it was possible to observe an harmony in the patient profile and improvement in periorbital musculature and tongue positioning.

Objetivo: Este relato de caso descreve um tratamento interceptivo da mordida aberta anterior (MAA) com grade palatina fixa usando dados clínicos, cefalométricos, eletromiográficos e de fala. Relato do caso: Menina de 8 anos de idade apresentando maloclusão Classe I de Angle e MAA. A documentação ortodôntica completa foi obtida e os músculos periorais foram avaliados pela eletromiografia durante as atividades de sopro, sucção e sorriso, antes e após o tratamento. A avaliação acústica da fala foi realizada através das frequências dos formantes para avaliar a posição da língua. Resultados: O MAA foi corrigida em seis meses com redução do transpasse vertical, diminuição dos ângulos cefalométricos 1: NA e 1: NB e aumento do ângulo interincisivo. Durante o movimento do sorriso, foi possível observar a diminuição da atividade muscular do músculo orbicular superior e o aumento da atividade muscular do orbicular inferior. No movimento do sopro, houve uma tendência a diminuir a atividade muscular. Direções opostas foram observadas no momento da instalação da grade nas frequências dos formantes. Quando a grade foi removida, a língua foi abaixada e posteriorizada em relação ao tempo de instalação inicial do aparelho. Quando comparados os momentos final e inicial, observou-se predomínio da posição inferior da língua, além de posteriorização em algumas vogais e anteriorização em outras. Conclusão: Após o uso da grade palatina fixa como tratamento interceptivo para a MAA, a mordida foi fechada e foi possível observar harmonia no perfil da paciente e melhora da musculatura periorbital e posicionamento da língua.

Multidisciplinary treatment of Class I angle Malocclusion with severe Crowding and Peg Lateral Incisor: A case report

@#Class I malocclusions with severe crowding and tooth size discrepancies may be successfully treated orthodontically with extraction therapy, and co-management with other specialists. Correction of the discrepancies will optimize occlusal result (overjet, overbite, midline shift, and smile esthetics). This is a case of a 19-year-old male with severe crowding in upper and lower teeth and peg lateral incisor. The patient had malocclusion Class I. This case was treated comprehensively and successfully using fixed orthodontic appliances with extraction of four premolars, and veneer composite for peg lateral incisor with the help of a conservative dentist at the end of orthodontic treatment.

Maxilla Pseudoarthrosis Ten Years After Orthognathic Surgery: case report / Pseudoartrosis Maxilar Diez Años Después de la Cirugía Ortognática: relato de un Caso

ABSTRACT: Many orthodontic treatments alone cannot reestablish an ideal occlusion, requiring correction through orthognathic surgery. An adequate surgical planning, execution and case follow-up can provide surgical stability between the maxilla and the mandible. Soft tissue conservation and proper correction during a healing phase are important to achieving this goal. Patient C.L.B.S, 38 years old, female, presented with Angle Class I occlusion, facial profile class II, maxilla with mobility, chin surgically advanced and anterior open bite. She was submitted to orthognathic surgery 10 years ago. In the panoramic radiography the absence of bone formation in the maxilla was observed, causing an open bite. For the surgery conventional radiographs were used, as well as the dental cast in articulator for model surgery and preparation of surgical guide. With the surgery an improvement in the patient's aesthetics profile and an ideal occlusion, static and functional were expected. The treatment was orthodontic-surgical, with correction of the dento-facial deformity with counter-clockwise rotation of the maxilla, lowering repositioning in 3 mm of its posterior portion through Le Fort I osteotomy, advancement of the 4 mm mandible with bilateral sagittal osteotomy, and genioplasty for posterior repositioning with a Z-osteotomy, to improve mentual harmony. There was an improvement in the profile and aesthetics of the patient, which developed an Angle Class I profile, a decrease in the mentual projection, and an aesthetic and functional improvement. The orthognathic surgery allowed the advancement of the mandible, the repositioning of the maxilla and the mentual posterior repositioning, obtaining the correction of the Angle class II profile and the anterior open bite, resulting in an important improvement of facial profile and esthetics, presence of skeletal stability, restoration of function, self-esteem and quality of life.

RESUMEN: En muchos casos, el tratamiento ortodóntico por si solo no puede restablecer una oclusión ideal, siendo necesaria una cirúrgia ortognática. Una buena planificación quirúrgica, ejecución y seguimiento del caso, pueden proporcionar estabilidad entre los maxilares. La preservación de los tejidos blandos y una fijación adecuada son esenciales para ese objetivo. La paciente CLBS, 38 años, se presentó con oclusión Clase I de Angle, teniendo perfil clase II, maxilar con movilidad, mentón quirúrgicamente avanzado y mordida abierta anterior. La paciente fue sometida a cirugía ortognática 10 años antes. En radiografía panorámica, se nota la ausencia de formación ósea debido a una fijación maxilar realizada erróneamente, lo que causó la mordida abierta. Durante la planificación, fueron utilizadas radiografías convencionales, modelos de yeso en articulador para cirugía de modelo y confección de guía quirúrgica. Con el procedimento quirúrgico se esperaba obtener una mejora en el perfil de la paciente y una oclusión ideal, estática y funcional. El tratamiento fue ortodóntico-quirúrgico, con corrección de la deformidad dento-facial con giro antihorario de la mandíbula, con reposicionamiento inferior de 3 mm de su parte posterior, por medio de osteotomía Le Fort I, avance de la mandíbula de 4 mm con osteotomía sagital bilateral, y retroceso del mentón en su posición original con osteotomía en Z, mejorando la armonía del mentón. Hubo una mejora en perfil y en la estética de la paciente, como también una mejora en el perfil, estética y funcionalidade, con diminución del mentón. La cirúrgia ortognática permitió el movimiento de la mandíbula, reposicionamiento maxilar y además fue posible retroceder el mentón, obteniendo la corrección del perfil Clase II y de la mordida abierta anterior. El resultado representa una mejora del perfil y de la estética facial, además se nota una estabilidad esquelética, con restablecimiento de la función, autoestima y calidad de vida.

Comparison of the accuracy of virtual and direct bonding of orthodontic accessories

ABSTRACT Introduction: Conventional direct and indirect bonding techniques fail to obtain the ideal bracket position. Objective: To compare the accuracy of virtual and conventional direct bonding of orthodontic accessories. Methods: A single virtual configuration (dental mannequin with Class I malocclusion) served as basis for generating the reference model (treated virtually) and the intervention models (10 digital models and 10 solid models, obtained by means of prototyping). A total of 560 teeth were then equally distributed between a group of orthodontists (Group I, direct bonding; and Group II, virtual bonding), working in two different time intervals. The individual positions of the accessories were measured after three-dimensional superimposition with customized software. The Student's-t test for paired samples, and Chi-square tests were used for statistical analysis, both at the level of significance of 5%. Results: In comparison of the errors in raw values, there were significant differences only in the vertical (p< 0.001) and horizontal dimensions (p< 0.001). Considering the groups of ranges by clinical limits of the deviations, these differences were significant in the three dimensions, vertical (p< 0.001), horizontal (p= 0.044) and angular (p= 0.044). Conclusion: Virtual bonding made it possible to obtain more precise/accurate positioning of the orthodontic accessories. The potential accuracy of this method brings new perspectives to refining the indirect bonding protocols.

RESUMO Introdução: técnicas convencionais, diretas ou indiretas, de colagem de acessórios ortodônticos falham em obter a posição ideal desses. Objetivo: comparar a acurácia da colagem virtual e da colagem direta de acessórios ortodônticos por vestibular. Métodos: uma configuração virtual única (modelo de manequim com Classe I dentária) serviu como base para a geração do modelo de referência (tratado virtualmente) e dos modelos de intervenção (10 modelos digitais e 10 modelos sólidos, obtidos por prototipagem). Quinhentos e sessenta dentes foram, então, igualmente distribuídos, em dois tempos distintos, entre um grupo de ortodontistas (Grupo I: colagem direta; Grupo II: colagem virtual). As posições individuais dos acessórios foram aferidas após a sobreposição tridimensional de modelos, em software customizado. O testet de Student para amostras pareadas e o teste Qui-quadrado foram usados para a análise estatística, ambos com nível de significância de 5%. Resultados: na comparação dos erros, em valores brutos, houve diferenças significativas apenas nas dimensões vertical (p< 0,001) e horizontal (p < 0,001). Considerando-se o agrupamento de faixas por limites clínicos dos desvios, essas diferenças foram significativas nas três dimensões: vertical (p < 0,001), horizontal (p = 0,044) e angular (p = 0,044). Conclusão: a colagem virtual possibilitou um posicionamento mais preciso dos acessórios ortodônticos. Seu potencial de precisão traz novas perspectivas ao refinamento dos protocolos indiretos.

Developmental association of palatal dimensions and palatal rugae characteristics in Angle´s classes I, II and III of malocclusion / Asociación de desarrollo de las dimensiones palatinas y las características de las rugas palatinas en las clases I, II y III de maloclusión de Angle

During development, bony changes in the palate are reflected in the palatal rugae. Therefore, we hypothesized that the palatal dimensions (PD) influence the shape and number of palatal rugae (PR). The objectives were to record the palatal rugae characteristics (PRC) and palatal dimensions (intercanine distance (ICD), intermolar distance (IMD), palatal height (PH) and palatal area (PA) in Classes I, II and III malocclusion patients and investigate their interrelationship, and statistically examine the possibility of predicting PRC with the PD. Four hundred eighty-one pre-orthodontic study casts of healthy patients with normal palate anatomy were grouped as Classes I, II and III and scanned using 3D cast scanner. The PRC, ICD, IMD, PH, and PA were recorded digitally using 3D enabled software. The data was statistically analyzed. A strong statistically significant difference was observed between PA and number of straight and wavy rugae. ICD and the number of straight rugae were also related. A weak correlation exists between malocclusion classes and PA. The remaining rugae characteristics did not exhibit any relation with palatal dimensions. PA is positively related to the number of straight rugae and negatively related to the number of wavy rugae. Bigger palates have more straight rugae and less number of wavy rugae. A weak correlation between PA and Angle's class I malocclusion exists. We also propose that PA has a developmental association with the number and shape of PR.

Durante el desarrollo, los cambios óseos en el paladar se reflejan en las rugas palatinas. Por lo tanto, planteamos la hipótesis de que las dimensiones palatinas influyen en la forma y el número de las rugas palatinas. Los objetivos fueron registrar las características de las rugas palatinas y las dimensiones palatales (distancia intercanina, distancia intermolar, altura palatina y área palatina) en pacientes con maloclusión de clases I, II y III e investigar su interrelación, y examinar estadísticamente la posibilidad de predecir las características de las rugas palatinas con las dimensiones palatinas. Cuatrocientos ochenta y un estudios pre-ortodónticos de pacientes sanos con anatomía normal del paladar se agruparon como Clases I, II y III y se escanearon con un escáner de emisión 3D. La distancia intercanina, distancia inter molar, altura palatina y área palatina se registraron digitalmente utilizando el software 3D. Los datos se analizaron estadísticamente. Se observó una diferencia estadísticamente significativa entre la altura palatina y el número de rugas rectas y onduladas. Se registró también la distancia intercanina y el número de rugas rectas. Existe una correlación débil entre las clases de maloclusión y la altura palatina. Las características restantes de las rugas palatinas no mostraron ninguna relación con las dimensiones palatinas. El área palatina está relacionada positivamente con el número de rugas rectas y negativamente relacionada con el número de rugas onduladas. Los paladares más grandes tienen más rugas rectas y menor cantidad de rugas onduladas. Existe una correlación débil entre el área palatina y la clase I de maloclusión de Angle. También proponemos que el área palatina tiene una asociación de desarrollo con el número y la forma de rugas palatinas.