Esthetic perception of facial profile changes after extraction and nonextraction Class II treatment

Abstract This retrospective study evaluated facial profile pleasantness determined by two protocols of Class II treatment. The sample comprised facial profile silhouettes obtained retrospectively from the pretreatment (T1) and posttreatment (T2) cephalograms of 60 patients (42 males and 18 females) divided into two groups. One group of 30 patients (mean age of 12.84 years) was treated with the extraction of maxillary first premolars (mean treatment time of 2.7 years), and the other group of 30 patients (mean age of 12.81 years) was treated with a mandibular advancement appliance (Forsus) (mean treatment time of 2.49 years). The facial profile silhouettes (T1 and T2) were randomly distributed in an album containing one patient per sheet. The examiners consisted of 60 orthodontists and 60 lay individuals, who analyzed the profiles in regard to facial pleasantness, using the Likert scale. A comparison between stages T1 and T2 of the two treatment protocols and between the examiners was performed by mixed-design analysis of variance at a significance level of 5%. The results demonstrated a significant difference between T1 and T2 (greater scores for T2 compared to T1), and between lay individuals and orthodontists (orthodontists assigned higher scores), but with no significant difference between the treatment protocols. Both protocols produced positive effects on the facial profile esthetics, from the standpoint of lay individuals and orthodontists.

Developmental association of palatal dimensions and palatal rugae characteristics in Angle´s classes I, II and III of malocclusion / Asociación de desarrollo de las dimensiones palatinas y las características de las rugas palatinas en las clases I, II y III de maloclusión de Angle

During development, bony changes in the palate are reflected in the palatal rugae. Therefore, we hypothesized that the palatal dimensions (PD) influence the shape and number of palatal rugae (PR). The objectives were to record the palatal rugae characteristics (PRC) and palatal dimensions (intercanine distance (ICD), intermolar distance (IMD), palatal height (PH) and palatal area (PA) in Classes I, II and III malocclusion patients and investigate their interrelationship, and statistically examine the possibility of predicting PRC with the PD. Four hundred eighty-one pre-orthodontic study casts of healthy patients with normal palate anatomy were grouped as Classes I, II and III and scanned using 3D cast scanner. The PRC, ICD, IMD, PH, and PA were recorded digitally using 3D enabled software. The data was statistically analyzed. A strong statistically significant difference was observed between PA and number of straight and wavy rugae. ICD and the number of straight rugae were also related. A weak correlation exists between malocclusion classes and PA. The remaining rugae characteristics did not exhibit any relation with palatal dimensions. PA is positively related to the number of straight rugae and negatively related to the number of wavy rugae. Bigger palates have more straight rugae and less number of wavy rugae. A weak correlation between PA and Angle's class I malocclusion exists. We also propose that PA has a developmental association with the number and shape of PR.

Durante el desarrollo, los cambios óseos en el paladar se reflejan en las rugas palatinas. Por lo tanto, planteamos la hipótesis de que las dimensiones palatinas influyen en la forma y el número de las rugas palatinas. Los objetivos fueron registrar las características de las rugas palatinas y las dimensiones palatales (distancia intercanina, distancia intermolar, altura palatina y área palatina) en pacientes con maloclusión de clases I, II y III e investigar su interrelación, y examinar estadísticamente la posibilidad de predecir las características de las rugas palatinas con las dimensiones palatinas. Cuatrocientos ochenta y un estudios pre-ortodónticos de pacientes sanos con anatomía normal del paladar se agruparon como Clases I, II y III y se escanearon con un escáner de emisión 3D. La distancia intercanina, distancia inter molar, altura palatina y área palatina se registraron digitalmente utilizando el software 3D. Los datos se analizaron estadísticamente. Se observó una diferencia estadísticamente significativa entre la altura palatina y el número de rugas rectas y onduladas. Se registró también la distancia intercanina y el número de rugas rectas. Existe una correlación débil entre las clases de maloclusión y la altura palatina. Las características restantes de las rugas palatinas no mostraron ninguna relación con las dimensiones palatinas. El área palatina está relacionada positivamente con el número de rugas rectas y negativamente relacionada con el número de rugas onduladas. Los paladares más grandes tienen más rugas rectas y menor cantidad de rugas onduladas. Existe una correlación débil entre el área palatina y la clase I de maloclusión de Angle. También proponemos que el área palatina tiene una asociación de desarrollo con el número y la forma de rugas palatinas.

Morphological characteristics of soft tissue profile of Angle's class II division i malocclusion before and after orthodontic treatment / Características morfológicas del perfil de tejido blando de la clase II de la división I de maloclusión de ángulo antes y después del tratamiento de ortodoncia

SUMMARY: By analysing cephalometrics before and after the treatment of Angle's class II division 1 malocclusion, soft tissue profile changes were observed, and to explore whether there was a correlation between the change of posterior occlusal plane (OP-P) and soft tissue profile. The study aimed to provide a theoretical reference in the clinical diagnosis and orthodontic treatment of early permanent dentition of Angle class II division 1 malocclusion patients. We randomly selected 20 cases of orthodontics in Shanxi Medical University orthodontics patients (aged 12-18 years) of the lateral cephalograms, Winceph 8.0 software was used to measure the posterior occlusal plane (OP-P), TUL-EP, TLL-EP, nasolabial angle, upper lip base thickness, upper lip tension, lower lip H line distance, chin soft tissue thickness and Z angle. And SPSS 22.0 software was used to analyze the correlation between OP-P and other measurement indexes. The change of posterior occlusal plane was positively related to the distance from upper lip to the esthetic plane, the distance from lower lip to the esthetic plane, the tension of the upper lip and distance from lower lip to H line, and the change of posterior occlusal plane was negatively related to nasolabial angle and Z angle. The change of posterior occlusal plane had no significant correlation with upper lip base thickness and soft tissue chin thickness. The change of posterior occlusal plane has an important guiding significance for orthodontic treatment,by focusing on the change of the posterior occlusal plane to achieve the purpose of changing the soft tissue profile.

RESUMEN: Se realizó un estudio cefalométrico antes y después del tratamiento de ortodoncia en pacientes portadores de maloclusión clase II división 1 de Angle. Se observaron cambios en el perfil de los tejidos blandos y se exploró si había una correlación entre el cambio del plano oclusal posterior (OP-P) y el perfil de los tejidos blandos. El objetivo de este estudio fue otorgar una referencia teórica en el diagnóstico clínico y el tratamiento de ortodoncia de los pacientes con dentición permanente temprana con maloclusión clase II división 1 de Angle. Seleccionamos al azar 20 casos cefalometrías de pacientes de ortodoncia de la Universidad Médica de Shanxi (entre 12 y18 años). Para ello, se utilizó el software Winceph 8.0 para medir el plano oclusal posterior (OP-P), TUL-EP, TLL-EP, ángulo nasolabial, grosor de la base del labio superior, tensión del labio superior, distancia entre líneas del labio inferior H, grosor del tejido blando del mentón y ángulo Z. Se utilizó el software SPSS 22.0 para analizar la correlación entre OP-P y otros índices. El cambio del plano oclusal posterior tuvo una correlación positiva con la distancia desde el labio superior al plano estético, la distancia desde el labio inferior hasta el plano estético, la tensión del labio superior y distancia del labio inferior a la línea H. El cambio del plano oclusal posterior tuvo una correlación negativa con el ángulo nasolabial y el ángulo Z. El cambio del plano oclusal posterior no tuvo una correlación significativa con el grosor de la base del labio superior y la barbilla de tejido blando. El cambio del plano oclusal posterior tiene un importante significado de orientación para el tratamiento de ortodoncia, de tal manera que al cambiar el plano oclusal posterior se podrá lograr el propósito de cambiar el perfil del tejido blando.

Palatal rugae characteristics and its relationship with Angle class 1, 2 & 3 malocclusions / Características de rugas palatinas y su relación con ángulos de maloclusiónes clase 1, 2 & 3

SUMMARY: The objectives of the study were to, 1. Compare the accuracy of four methods of acquisition of palatal rugae (PR) characteristics (PRC). 2. Study the predominant PRC in Angles Class 1, 2, and 3 malocclusions. 3. To statistically correlate the predominant PRC with Class 1, 2 & 3 malocclusions and thus explore the possibility of utilizing it in predicting malocclusions. Study casts and intraoral 3D scan images (3Shape® Intra-Oral Scanner) of the palate of 104 healthy orthodontic patients were included as Group I and Group II respectively. The casts of Group I were scanned using 3Shape® (Group III) and Sirona inEos X5® (Group IV) cast scanners. PRC for all groups were recorded and PRC of Group I was compared with PRC of Groups II, III and IV for possible matching. 3D images of Group IV were further divided according to Angles classification and predominant PRC analyzed. 97.8 % of PRC match was observed in Group I and Group IV. Wavy and complex rugae were predominant in Class 1 and 3 malocclusions and showed statistically significant difference between Class 1, 2 and 3 malocclusions (p=0.00 and 0.014 respectively) with wavy being higher in Class 1 and complex being higher in Class 3 (LSD Post Hoc analysis). Direct intraoral 3D scanning and 3D scanning of the palatal area of casts are equally reliable methods for PR acquisition for examining PRC. All PRC considered together have a minimal impact on prediction of malocclusions, however, influence of wavy characteristic was maximum.

RESUMEN: Los objetivos del estudio fueron los siguientes: 1. Comparar la precisión de cuatro métodos de adquisición de las características de la rugosidad palatina (CRP). 2. Estudiar las CRP predominantes en maloclusiones clases 1, 2 y 3. 3. Correlacionar estadísticamente las CRP predominantes con maloclusiones clase 1, 2 y 3 e investigar la posibilidad de utilizarlas en la predicción de maloclusiones. Se incluyeron en el Grupo I y en el Grupo II, los moldes de estudio y las imágenes de barrido 3D intraoral (3Shape® Intra-Oral Scanner) del paladar de 104 pacientes ortodónticos sanos. Los escaneos del Grupo I se escanearon utilizando escáner fundidos 3Shape® (Grupo III) y Sirona inEos X5® (Grupo IV). CRP para todos los grupos se registraron y CRP del Grupo I se comparó con las CRP de los Grupos II, III y IV para una posible coincidencia. Las imágenes 3D del Grupo IV se dividieron de acuerdo con la clasificación de ángulos y las CRP predominantes analizadas. Se observó un 97,8 % de concordancia en CRP en los grupos I y IV. Las rugas onduladas y complejas predominaron en las maloclusiones de Clases 1 y 3 y mostraron diferencias estadísticamente significativas entre las maloclusiones de Clases 1, 2 y 3 (p = 0,00 y 0,014 respectivamente), siendo el ondulado más alto en la Clase 1 y el complejo en la Clase 3 (LSD Post Hoc). El escaneo 3D intraoral directo y el escaneado 3D del área palatal son métodos igualmente confiables para la adquisición de CRP para el examen de las CRP. Todas las CRP consideradas en conjunto tienen algún grado de impacto en la predicción de las maloclusiones, sin embargo, fue mayor la influencia de la característica ondulada.

Morphological characteristics of the cranial base of early Angle's class II division 1 malocclusion in permanent teeth / Características morfológicas de la base de cráneo en la maloclusión temprana clase II división 1 de Angle en dientes permanentes

To investigate the effects of morphological characteristics of cranial base on malocclusion by analyzing characteristics of sagittal and vertical facial types of Angle's class II division 1 malocclusion so as to provide theoretical references for clinical diagnosis and correction of early Angle's class II division 1 malocclusion in permanent teeth. We randomly selected lateral radiographs of the skull of 80 patients at the age of 12­14 years old from the Department of Orthodontics, Stomatological Hospital, Shanxi Medical University, China. There were 20 cases of Angle's class I malocclusion with average angle, 20 cases of Angle's class II division 1 malocclusion with average angle, 20 cases of Angle's class II division 1 malocclusion with low angle, and 20 cases of Angle's class II division 1 malocclusion with high angle. Winceph 8.0 software was used to measure 39 hard tissue markers and 13 indicators reflecting the characteristics of cranial base structure. One-way t-test was used in the average-angle class II division 1 group and average-angle class I group. Least significantdifference was utilized in patients with different vertical types of class II division 1 malocclusion.nterior (S-N) and posterior (S-Ba) cranial base lengths,and total cranial base length(Ba-N) were significantly longer in the class II division 1 patients compared with the class I patients. Significant differences in anterior cranial floor base angle (CF-PM), middle cranial floor base angle (Ba-SE-PM), and posterior cranial base inclination (SBa-FH) were determined between class II division 1 malocclusion and class I malocclusion patients. CF-PM angle and SBa-FH were smaller in class II division 1 subjects than in class I subjects. Ba-SE-PM angle and cranial floor base angle (Ba-SE-FMS) were larger in class II division 1 subjects than in class I subjects. No significant difference in cranial base angle (N-S-Ba) and anterior cranial base inclination (SN-FH) was detected between class II division 1 subjects and class I subjects. Morphology of cranial base and cranial floor base has a significant effect on sagittal and vertical facial types of Angle's class II division 1 malocclusion. The changes in the length of the posterior skull base and the inclination of the anterior skull base are mainly presented in the sagittal direction. Angle of cranial base and cranial floor base plays a certain role in vertical facial type of Angle's class II division 1 malocclusion.

El objetivo de este trabajo consistió en investigar los efectos de las características morfológicas de la base craneal sobre la maloclusión, a través del análisis de los siferentes tipos faciales de maloclusión Clase II de Angle (sagital y vertical), para proporcionar referencias teóricas para el diagnóstico clínico y la corrección temprana de la maloclusión de clase II división 1 de Angle en dientes permanentes. Se seleccionaron al azar radiografías laterales de cráneo de 80 pacientes, entre 12-14 años de edad, del Departamento de Ortodoncia, Hospital de Estomatología, Universidad Médica de Shanxi, China. Hubo 20 casos de maloclusión clase I de Angle con ángulo promedio, 20 casos de maloclusión clase II de Angle con ángulo promedio, 20 casos de maloclusión Clase II de Angle con ángulo bajo y 20 casos de maloclusión clase 1 de Angle con ángulo alto. Se utilizó el software Winceph 8.0 para medir 39 marcadores de tejido duro y 13 indicadores que reflejan las características de la estructura de la base de cráneo. Se usó la prueba t de una vía en el grupo clase II de división 1 con ángulo promedio y el grupo clase I con ángulo promedio. Se detectaron diferencias mínimas significativas en pacientes con diferentes tipos verticales de maloclusión clase II división 1. Las longitudes de la base de cráneo posterior (SN) y posterior (S-Ba), y la longitud total de la base craneal (Ba-N) fueron significativamente mayores en la clase II, en comparación con los pacientes de la clase I. Se determinaron diferencias significativas en el ángulo de la base del piso craneal anterior (CF-PM), el ángulo de la base del piso craneal medio (Ba-SE-PM) y la inclinación de la base craneana posterior (SBa-FH) entre la maloclusión clase II división 1 y los pacientes con maloclusión de clase I. Los ángulos de CF-PM y SBa-FH fueron más pequeños en la clase II división 1 que en la clase I. El ángulo de Ba-SE-PM y el ángulo de base del piso craneal (Ba-SE-FMS) fueron mayores en sujetos de clase II división 1 que en sujetos de clase I. No se detectaron diferencias significativas en el ángulo de la base craneana (N-S-Ba) y la inclinación de la base craneal anterior (SN-FH) entre los sujetos de la clase II división 1 y los de la clase I. La morfología de la base craneal y de la base del suelo craneal tiene un efecto significativo en los tipos faciales sagital y vertical de maloclusión Clase II división 1 de Angle. Los cambios en la longitud de la base posterior del cráneo y la inclinación de la base anterior del cráneo se presentaron principalmente en la dirección sagital. El ángulo de la base craneal y la base del suelo craneal tiene cierto rol en el tipo facial vertical de la clase II de Angle.

Comparison of arch forms between Turkish and North American

ABSTRACT Objective: The aim of this study was to clarify the morphological differences in the mandibular arches of Turkish and North American white subjects. Methods: The sample included 132 Turkish (34 Class I, 58 Class II, and 40 Class III) and 160 North American (60 Class I, 50 Class II, and 50 Class III) subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of patients' mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The subjects were grouped according to arch form types (tapered, ovoid and square) in order to have frequency distribution compared between ethnic groups in each Angle classification. Results: The Turkish group showed significantly lower molar depth and more significant molar width-depth (W/D) ratio in all three Angle classifications. On the other hand, the Turkish group also showed a significantly larger intercanine width in Class III malocclusion and intermolar width in Class II malocclusion. The most frequent arch forms seen were the ovoid arch form in the Turkish group and the tapered form in the white group. Conclusions: Our results demonstrate that when treating Turkish patients, one should expect to use preformed ovoid arch form orthodontic wires in a significant percentage of patients.

RESUMO Objetivo: o objetivo deste estudo foi avaliar as diferenças morfológicas entre as arcadas dentárias inferiores de indivíduos turcos e indivíduos norte-americanos leucodermas. Métodos: a amostra incluiu 132 indivíduos turcos (34 Classe I, 58 Classe II e 40 Classe III) e 160 norte-americanos (60 Classe I, 50 Classe II e 50 Classe III). A porção mais vestibular de 13 áreas de contato proximal foi digitalizada a partir de imagens impressas das arcadas dentárias inferiores dos pacientes. Os pontos de colagem dos braquetes foram calculados, para cada dente, com base em dados referentes à espessura dos dentes inferiores. Quatro medidas lineares e duas proporcionais foram obtidas. Os indivíduos foram classificados de acordo com o formato da arcada (triangular, oval e quadrada), permitindo que a frequência de cada formato fosse comparada entre os grupos étnicos, e dentro de cada classificação de Angle. Resultados: o grupo composto por indivíduos turcos apresentou profundidade da arcada na região dos molares significativamente menor, além de uma proporção largura/profundidade da arcada na região dos molares maior em todas as classificações de Angle. Em contrapartida, esse mesmo grupo mostrou maiores distâncias intercaninos nos pacientes Classe III e intermolares nos pacientes Classe II. A arcada oval foi a mais frequente no grupo composto por indivíduos turcos, enquanto a arcada triangular foi a mais frequente no grupo composto por indivíduos norte-americanos leucodermas. Conclusões: os resultados obtidos mostram que, ao tratar pacientes turcos, o profissional deve prever o uso de arcos ortodônticos pré-conformados ovais em um percentual significativo dos pacientes.

Avaliação das alterações nas vias aéreas superiores através de tomografia computadorizada Cone-Beam em pacientes submetidos à cirurgia ortognática de avanço bimaxilar / Three-dimensional upper airway space changes after bimaxillary advancement by Cone-Beam Computed Tomography

Introdução: O descontentamento com a estética facial é considerado o fator motivador mais frequente na procura pela cirurgia ortognática, visto que este é o procedimento indicado nos casos de severas discrepâncias dentoesqueléticas em pacientes adultos. A anatomia das vias aéreas superiores (VAS) permite que fatores como obesidade, hipotonia muscular e deficiência mandibular favoreçam sua obstrução, podendo gerar a Apneia Obstrutiva do Sono (AOS), caracterizada por episódios recorrentes de obstrução parcial ou completa das VAS durante o sono. As cirurgias de avanço bimaxilar estão associadas ao aumento do espaço aéreo, no entanto, as alterações morfológicas e volumétricas ainda não são bem conhecidas. Objetivos: Avaliar as alterações em 3D do espaço aéreo faríngeo frente aos procedimentos de cirurgia ortognática de avanço bimaxilar em pacientes Classe I e II esqueléticos. Material e Métodos: A análise da área axial mínima e do volume da aérea superior foi realizada em pré-operatório (T0) e pós-operatório (T1) de 56 pacientes, sendo 21 do sexo masculino e 35 do sexo feminino, com média de idade de 35,8 (±10,7) anos, submetidos ao avanço bimaxilar pela técnica da osteotomia sagital de mandíbula bilateral associada ao avanço de maxila por meio de osteotomia Le Fort I. As avaliações foram feitas através de tomografia computadorizada Cone-beam, utilizando-se o Programa Dolphin Imaging 11.7. Foi utilizado o teste t pareado para comparar os dados pré e pós-operatórios. Todos os testes foram realizados com o programa Statistica, adotando-se um nível de significância de 5%. Resultados: No estudo do erro do método, não houve erro casual nem sistemático entre a primeira e a segunda medição das variáveis (p >0,05 em todas as medidas). A cirurgia de avanço bimaxilar apresentou uma média de 73,6% (± 74,75%) de aumento volumétrico e 113,5% (±123,87%) de aumento na área axial mínima. Conclusões: Podemos concluir que a cirurgia de avanço bimaxilar proporciona um aumento volumétrico significativo no espaço aéreo superior, bem como na área axial mínima, no entanto, esse ganho nem sempre ocorre na mesma magnitude para todos os pacientes.(AU)

Introduction: Facial aesthetics dissatisfaction is considered the most common motivating factor in the search for orthognathic surgery. This procedure may be used in cases of severe dental and skeletal discrepancies in adult patients. The restricted space anatomy of the upper airway space (UAS) allows features such as obesity, muscular hypotonia and mandibular deficiency favor clogging, which may lead to obstructive sleep apnea (OSA), characterized by recurrent episodes of partial or complete obstruction of the UAS during sleep. Surgeries of bimaxillary advancement are associated with increased UAS, however, the morphological and volumetric changes are not well known. Objectives: to evaluate changes in 3D pharyngeal airway in front of orthognathic surgery procedures of skeletal Class I and II subjects. Material and Methods: 3D pharyngeal airway was evaluated preoperative (T0) and postoperative (T1), with the aid of the analysis of the minimum axial area and airway volume. Fifty-six patients 21 male and 35 female, with a mean age of 35.8 (± 10.7) years undergo bimaxillary advancement by the technique of bilateral sagittal split osteotomy of the mandible associated with maxillary advancement through Le Fort I osteotomy. Measurements were made using Cone-beam Computed Tomography, using the Dolphin Imaging program 11.7. Paired t test was used to compare to the data between T0 and T1. All tests were performed with the Statistica Program, adopting a 5% significance level. Results: In the method error of the study, there was no casual or systematic error between the first and second measurement variables (p > 0.05 for all measures). The bimaxillary advancement surgery showed an average of 73.6% (± 74.75%) of increase in volume and 113.5% (±123.87%) increase in the minimum axial area. Conclusions: We concluded that the maxillomandibular advancement surgery provides a significant increase in volume in the UAS as well as the minimum axial area; however, this gain is not always in the same magnitude for all patients.(AU)

Maxillary incisors initial position and soft-tissue changes in Class II malocclusion extraction protocols / Posição inicial dos incisivos superiores e alterações no perfil facial nos protocolos de extração da má oclusão de Classe II

Introdução: Diferenças da atratividade encontradas entre os protocolos de tratamento Classe II em longo prazo e no pós-tratamento incitou estes estudos. O Elemento II demonstrou que os rostos bem equilibrados tem incisivos superiores posicionados em um relacionamento anteroposterior individualmente calculado com a testa. Deste modo, o Elemento II foi utilizado para investigar as características iniciais dos pacientes. Além disso, para avaliar as mudanças que os protocolos de extrações resultam nos tecidos moles, uma revisão sistemática foi realizada com busca nas bases de dados PubMed, Web of Science, Embase, Scopus e Cochrane. Resultados: O grupo CII teve posição AP dos incisivos superiores mais anteriores quando comparado ao grupo NO. Além disso, as posições AP dos incisivos nos subgrupos de extração foram à frente, quando comparado com o subgrupo NE. Alterações dos tecidos moles estatisticamente significantes foram ângulo nasolabial (NLA) que aumentou de 2,4º a 5,40º no protocolo de extração de 2 pré-molares e de 1º a 6,84º no protocolo de extração de 4 pré-molares. Retrusão dos lábios superior e inferior também foram verificadas, com menor retração do lábio inferior nos grupos de extração de dois pré-molares. Conclusões: Indivíduos com Classe II apresentaram os incisivos superiores significativamente mais protruídos que os indivíduos com oclusão normal. Na Classe II divisão 1, o subgrupo tratado com extrações apresentaram os incisivos significativamente mais protruídos em comparação com o subgrupo sem extrações. Quando Classe II divisão 1 é tratada com extrações de pré-molares, há aumento do NLA e os lábios são retraídos. No entanto, há menor retração do lábio inferior no protocolo de extração de 2 prémolares superiores.(AU)

Introduction: Differences in long-term and posttreatment attractiveness between Class II treatment protocols motivated these studies. Element II demonstrated that well-balanced faces have maxillary incisors positioned in an individually calculated anteroposterior relationship with the forehead. Thus, it was used to investigate the initial characteristics of the patients. Moreover, to evaluate the soft-tissue changes with extraction protocols, a systematic review was performed searching PubMed, Web of Science, Embase, Scopus and Cochrane electronic databases. Results: The CII group had forward incisors AP position when compared to the NO group. Also, the incisors AP positions in the extraction subgroups were forward when compared to the NE subgroup. Statistically significant soft-tissue changes reported included nasolabial angle (NLA) increasing from 2.4 to 5.40 degrees in the 2-premolar extraction protocol and from 1 to 6.84 degrees in the 4-premolar extraction protocol. Retrusion of the upper and lower lips were also verified, with less retraction of the lower lip in the 2-premolar extraction group. Conclusions: Class II subjects presented the maxillary incisors significantly more protruded than normal occlusion subjects. Class II division 1 extraction subgroups demonstrated significantly more protruded incisors as compared to the non-extraction subgroup. When Class II division 1 malocclusion is treated with premolar extractions, the NLA increases and the lips are retracted. However, there is less retraction of the lower lip in the 2- maxillary premolar extraction protocol.(AU)

Tomographic evaluation of the temporomandibular joint in malocclusion subjects: condylar morphology and position

Abstract The aim of this study was to investigate condyle concentricity and morphology, and their association with Class I and II malocclusions (Angle). The sample consisted of 49 individuals of both genders, between 11 and 35 years old, divided into two groups, G1: 26 patients with Class I malocclusion, and G2: 23 patients with Class II malocclusion, selected for orthodontic treatment. Evaluation of the condyle morphology and position was performed by the same previously calibrated examiner using cone-beam computed tomography (CBCT) images of the subjects. The CBCT scans were analyzed by means of a 3D program (Dolphin 11.5, Dolphin Imaging & Management Solutions, Chatsworth, CA, USA), with a 25% level of sensitivity. The images obtained from the coronal slices were employed for the condyle morphology analysis, which classified the condyle form as rounded, as flat or convex, and as triangular or angled. The sagittal slices were used to classify further the condyles as concentric and displaced anteriorly or posteriorly. A clinical examination was also performed, including TMJ and muscle palpation. The kappa test was used to evaluate investigator calibration; the Chi-square and paired t-tests were used for analysis. The convex and anteriorly positioned condyles were found most frequently, regardless of the type of malocclusion. No association was observed between the groups regarding condylar characteristics.

Facial soft tissue in subjects with class II and class III facial deformities: preliminary results / Tejido blando facial en sujetos con deformidad facial clase II y clase III: resultados preliminares

Class II and class III skeletal anomalies require treatments that are both esthetic and functional, so the purpose of this investigation was to study the relationship between facial soft and hard tissues of patients with class II and class III deformities in the lower third of the face. A descriptive study was designed which included class II subjects with a SNB angle less than 78 and class III with a SNA angle less than 80. The soft tissue width was analyzed in relation to the Pg point, A point, B point, and upper and lower incisor cervical points. The naso-labial angle and interincisal angle were also analyzed. The studies were done using cone beam computerized tomography and analyzed with the software Simplant O&O (Materialise, Belgium). The results revealed similarities in the measurements of the facial width soft tissues with differences of less 1 mm in the Pg point, A point, B point, upper incisor point; the greatest differences were observed between the two groups in thelower incisor cervical point, with almost 5 mm difference in tissue size. The naso-labial angle also presented differences between the two groups, being more closed in the class III than in the class II subjects (approximate difference of 6). It can be concluded that there are minimal differences in the soft tissue width in class II and class III subjects; other parameters can be analyzed to search for differences that influence treatment planning and strategies for these patients.

Las anomalías esqueletales de clase II y clase III requieren tratamientos que asocian estética y función. El objetivo de esta investigación fue estudiar la relación entre tejidos blandos y duros faciales de pacientes con clase II y clase III facial, a nivel del tercio inferior facial. Se diseño un estudio descriptivo donde se incluyeron sujetos clase II con un ángulo SNB menor de 78 y clase III con un ángulo SNA menor de 80. Se analizó el ancho de tejidos blandos en relación a los putos Pg, punto A, punto B, y puntos cervicales de dientes incisivos maxilar y mandibular; también se analizaron los ángulos nasolabial e interincisivo; los estudios se realizaron en tomografía computadorizada cone beam y analizados en el software Simplant O&O (Materialise, Belgium). Los resultados demostraron semejanzas en las mediciones obtenidas en el ancho facial de tejidos blandos con diferencias menores a 1 mm en los puntos Pg, punto A, punto B y cervical incisivo maxilar; en relación al punto cervical del incisivo mandibular se observaron las mayores diferencias entre ambos grupos, cercanas a 5 mm de diferencia de tamaño en los tejidos; el ángulo nasolabial también presento diferencias entre ambos grupos, siendo en los sujetos clase III mas cerrado que en sujetos clase II (diferencia aproximada de 6). Se puede concluir que existen mínimas diferencias en el ancho de tejidos blandos en sujetos de clase II y clase III; otros parámetros pueden ser analizados para búsqueda de diferencias que influyan en planificaciones y estrategias terapéuticas para estos sujetos.

Anteroposterior and Vertical Changes in Skeletal Class II Patients Treated With Modified Thurow Appliance

The aim of this study was to evaluate the post-treatment anteroposterior and vertical alterations in skeletal Class II malocclusion with different maxillary patterns in patients treated with modified Thurow appliance. Forty-five patients (22 girls and 23 boys) with skeletal Class II and angle SN.GoGn ≤ 35 and different maxillary patterns (n=15), as follows: retrusive (SNA<80°), normal (SNA=80°- 84°) or protrusive (SNA>84°) maxilla; mean age 9 years at pre-treatment (T1) and 9 years and 10 months at post-treatment (T2), were treated with modified Thurow cervical traction appliance, with expander screw and extraoral face bow with 10° to 20° fold in relation to the intraoral arch. Force of 500 gf was applied and use for 12 to 14 h/day, with fortnightly adjustments. Analysis of variance ANOVA followed by post-hoc Tukey and Kruskal-Wallis test, followed by Mann-Whitney were used (α=5%). In changes obtained from stage T1 to T2, no statistically significant differences were found among the groups Protrusive, normal and retrusive maxilla for the variables SNB, SN.GoGn, 1.NA, overjet, overbite and Class II discrepancy (right and left) (p>0.05). Angular measurements SNA and ANB in the protrusive maxilla group were significantly greater than in the normal and retrusive maxilla groups (p<0.01). However, in the normal maxilla group these values did not differ significantly from those of the retrusive maxilla group (p>0.05). Within the limits of this study, it may be concluded that the modified Thurow cervical traction appliance was efficient for the correction of skeletal Class II irrespective of the maxillary pattern. The mandible had no significant rotation during treatment.

O objetivo deste estudo foi avaliar as alterações verticais e ântero-posterior pós-tratamento da maloclusão Classe II esquelética com diferentes padrões maxilar de pacientes tratados com aparelho Thurow modificado. Quarenta e cinco pacientes (22 meninas e 23 meninos) com Classe II esquelética e ângulo SN.GoGn≤35 e diferente padrão maxilar (n=15),sendo: maxila retrusiva (SNA<80°), normal (SNA= 80°-84°) ou protrusiva (SNA>84°) e idade média de 9 anos no pré-tratamento (T1) e 9 anos e 10 meses no pós-tratamento (T2), foram tratados com aparelho Thurow modificado de tração cervical com parafuso expansor e arco facial externo com dobra de 10° a 20° em relação ao arco interno. Foi empregado a força de 500 gf e uso de 12 a 14 h/dia, com ajustes quinzenais. Análise de variância ANOVA seguido pelo teste post-hoc de Tukey e o teste de Kruskal-Wallis seguido por Mann-Whitney foram empregados (p<0.05). Nas mudanças obtidas da fase T1 para T2, não foram encontradas diferenças estatísticas entre os grupos maxila protusiva, normal e retrusiva para as variáveis SNB, SN.GoGn, 1.NA, overjet, overbite e discrepância de classe II (direita e esquerda) (p>0.05). As medidas angulares SNA e ANB no grupo maxila protusiva foi significativamente maior do que nos grupos maxila normal e retrusiva (p<0.01). Entretanto, esses valores no grupo maxila normal não diferiram do grupo maxila retrusiva (p>0.05). Dentro dos limites do estudo, pode-se concluir que o aparelho de Thurow modificado de tração cervical foi eficiente na correção da Classe II esquelética independente do padrão maxilar. A mandíbula não teve rotação significativa durante o tratamento.

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

INTRODUCTION: Due to the lack of studies that distinguish between dentoalveolar and basal changes caused by the Thurow appliance, this clinical study, carried out by the School of Dentistry - State University of São Paulo/Araraquara, aimed at assessing the dental and skeletal changes induced by modified Thurow appliance. METHODS: The sample included an experimental group comprising 13 subjects aged between 7 and 10 years old, with Class II malocclusion and anterior open bite, and a control group comprising 22 subjects similar in age, sex and mandibular plane angle. Maxillary/mandibular, horizontal/vertical, dental/skeletal movements (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6) were assessed, based on 14 landmarks, 8 angles (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) and 3 linear measures (N-Me, ANS-Me, S-Go). RESULTS: Treatment caused significantly greater angle decrease between the palatal and the mandibular plane of the experimental group, primarily due to an increase in the palatal plane angle. ANB, SNA and S-N-ANS angles significantly decreased more in patients from the experimental group. PNS was superiorly remodeled. Lower face height (ANS-Me) decreased in the experimental group and increased in the control group. CONCLUSIONS: The modified Thurow appliance controlled vertical and horizontal displacements of the maxilla, rotated the maxilla and improved open bite malocclusion, decreasing lower facial height. .

INTRODUÇÃO: devido ao número reduzido de estudos que distinguem entre as mudanças dentoalveolares e ósseas produzidas pelo aparelho de Thurow, esse estudo clínico, conduzido pelo departamento de Ortodontia da Faculdade de Odontologia de Araraquara, foi proposto para avaliar as mudanças dentárias e esqueléticas induzidas pelo aparelho de Thurow modificado. MÉTODOS: a amostra incluiu um grupo experimental de 13 indivíduos, entre 7 e 10 anos de idade, com má oclusão Classe II e mordida aberta anterior, e um grupo controle de 22 indivíduos, com idades, plano mandibular e má oclusão similares. Com base em 14 pontos cefalométricos, 8 ângulos (S-N-ANS, SNA, PPA, S-N-Pog, SNB, MPA, PP/MPA, ANB) e 3 medidas lineares (N-Me, ANS-Me, S-Go), foram avaliados movimentos maxilares e mandibulares horizontais e verticais dentários e esqueléticos (ANS, PNS, U1, U6, Co, Go, Pog, L1, L6). RESULTADOS: o tratamento produziu diminuição significativamente maior no ângulo entre o plano palatino e o plano mandibular do grupo controle, devido ao aumento do ângulo do plano palatino. Os ângulos A-N-B, S-N-A e S-N-ANS diminuíram significativamente mais no grupo tratado. A PNS sofreu remodelação superior. A altura facial inferior (ANS-Me) diminuiu no grupo tratado, ao passo que aumentou no grupo controle. CONCLUSÕES: o aparelho controlou deslocamento vertical e horizontal da maxila, rotacionou a maxila para melhorar a mordida aberta e diminuiu a altura facial inferior. .

Intercanine and intermolar widths in angle class I, II and III malocclusions

Malrelation along the transverse plane is one of the most common causes of malocclusion and can be assessed by considering the intercanine and intermolar widths. An endeavour was undertaken to find the intercanine and intermolar widths on 76 dental casts of the individuals having Class I, Class II division 1, Class II division 2, Class III and Class II subdivision malocclusions, visiting orthodontic department of Sardar Begum dental college and hospital, Peshawar. Results were obtained using SPSS version 20 which showed the mean maxillary intermolar widths of 34.6mm*, 34.5mm, 30.9mm, 34.7 mm and 34.18mm for Class I, Class II division 1,Class II division 2,Class III and Class II subdi-vision groups respectively. Mean maxillary intercanine widths were found to be 24.16mm, 24.5mm, 24.6mm, 23.9mm and 23.05mm for Class I, Class II division 1,Class II division 2,Class III and Class II subdivision groups respectively. Similarly mean mandibular intermolar widths were 32.8mm, 33.02mm, 30.3mm, 33.1mm and 32.8mm for Class I, Class II division 1, Class II division 2, Class III and Class II subdivision groups respectively. While mean mandibular intercanine widths were found to be 19.2mm,19.06mm,20.34mm,19.54mm and 18.75mm for the Class I, Class II division 1,Class II division 2,Class III and Class II subdivision groups respectively. ANOVA analysis showed no sta-tistical significant differences in the intermolar and intercanine widths among the five malocclusion groups

Comparative cephalometric study of Class II malocclusion treatment with Pendulum and Jones jig appliances followed by fixed corrective orthodontics

OBJECTIVE: The purpose of this study was to cephalometrically compare the skeletal and dentoalveolar effects in the treatment of Class II malocclusion with Pendulum and Jones jig appliances, followed by fixed corrective orthodontics, and to compare such effects to a control group. METHODS: The sample was divided into three groups. Group 1: 18 patients treated with Pendulum, Group 2: 25 patients treated with Jones jig, and Group 3: 19 young subjects with untreated Class II malocclusions and initial mean age of 12.88 years. The chi-square test was applied to assess severity and gender distribution. Groups 1 and 2 were compared to the control group by means of the one-way ANOVA and Tukey tests in order to differentiate treatment changes from those occurred by craniofacial growth. RESULTS: There were no significant changes among the three groups with regard to the components of the maxilla and the mandible, maxillomandibular relationship, cephalometric and tegumental pattern. Buccal tipping of mandibular incisors was significantly greater in the experimental groups and increased mesial angulation of the maxillary second molars was found in the Jones jig group. In the experimental groups, dental relationship, overbite and overjet were corrected. CONCLUSION: It can be stated that the distalization achieved its purpose of correcting the Class II.

OBJETIVO: a proposta desse estudo foi comparar, cefalometricamente, os efeitos esqueléticos e dentoalveolares no tratamento da má oclusão de Classe II com os distalizadores Pendulum e Jones jig, seguidos de aparelho fixo corretivo, e compará-los ao grupo controle. MÉTODOS: a amostra foi dividida em três grupos. Grupo 1: 18 pacientes tratados com o Pendulum; grupo 2: 25 pacientes tratados com o Jones jig; e grupo 3: 19 jovens com má oclusão de Classe II não tratada. Empregou-se o teste qui-quadrado para avaliar a distribuição da severidade e do sexo. Os grupos 1 e 2 foram comparados ao controle pela ANOVA a um critério; também empregou-se o teste de Tukey com o intuito de diferenciar as alterações do tratamento daquelas ocorridas pelo crescimento craniofacial. RESULTADOS: não foram observadas alterações significativas entre os três grupos quanto aos componentes da maxila, mandíbula, relação maxilomandibular, padrão cefálico e tegumentar. Verificou-se uma vestibularização significativamente maior dos incisivos inferiores nos grupos experimentais e maior angulação mesial dos segundos molares superiores no grupo 2 (Jones jig). Nos grupos experimentais, a relação dentária e os trespasses horizontal e vertical foram corrigidos. CONCLUSÃO: pode-se afirmar que os distalizadores alcançaram seus objetivos de correção da Classe II.

Assessment of first molars sagittal and rotational position in Class II, division 1 malocclusion

OBJECTIVE: This study assessed the anterior-posterior positioning of the upper and lower first molars, and the degree of rotation of the upper first molars in individuals with Class II, division 1, malocclusion. METHODS: Asymmetry I, an accurate device, was used to assess sixty sets of dental casts from 27 females and 33 males, aged between 12 and 21 years old, with bilateral Class II, division 1. The sagittal position of the molars was determined by positioning the casts onto the device, considering the midpalatal suture as a symmetry reference, and then measuring the distance between the mesial marginal ridge of the most distal molar and the mesial marginal ridge of its counterpart. With regard to the degree of rotation of the upper molar, the distance between landmarks on the mesial marginal ridge was measured. Chi-square test with a 5% significance level was used to verify the variation in molars position. Student's t test at 5% significance was used for statistical analysis. RESULTS: A great number of lower molars mesially positioned was registered, and the comparison between the right and left sides also demonstrated a higher number of mesially positioned molars on the right side of both arches. The average rotation of the molars was found to be 0.76 mm and 0.93 mm for the right and left sides, respectively. CONCLUSION: No statistically significant difference was detected between the mean values of molars mesialization regardless of the side and arch. Molars rotation, measured in millimeters, represented » of Class II.

OBJETIVO: esse estudo avaliou o posicionamento anteroposterior dos primeiros molares superiores (1º MS) e inferiores, e o grau de rotação dos 1º MS, em indivíduos com má oclusão de Classe II, divisão 1. MÉTODOS: mensuraram-se, em aparelho de precisão Assimetria I, 60 pares de modelos, de 27 indivíduos do sexo feminino e 33 do masculino, entre 12 e 21 anos de idade, com má oclusão de Classe II, divisão 1. Utilizando a sutura palatina mediana como referência de eixo de simetria, os modelos foram posicionados no aparelho para mensuração da distância entre a crista marginal mesial do molar mais distal e a crista marginal mesial do molar do lado oposto, a fim de verificar o posicionamento sagital dos molares. Em relação à giroversão, mediu-se a distância entre pontos na crista marginal mesial. O teste qui-quadrado a 5% foi utilizado para verificar a variação de posicionamento dos molares, por arcos e por lado. O teste t de Student a 5% foi utilizado para comparar esses valores. RESULTADOS: houve maior número de molares inferiores mesializados e, comparando os lados, maior número de molares mesializados no lado direito em ambas as arcadas. As rotações médias dos molares foram de 0,76mm do lado direito e 0,93mm do esquerdo. CONCLUSÃO: não houve diferença estatisticamente significativa entre os valores médios das mesializações dos molares quanto a lado ou arco. Quando observada isoladamente, a rotação dos molares, quantificada em milímetros, representou uma situação de » de Classe II.

Evaluation of the vertical alterations of the upper second molars after the alignment and leveling phase using the MBT technique

OBJECTIVE: This study aimed at comparing the distocervical angulations of upper second molars crowns of groups with normal occlusion and with Angle Class I and II malocclusions. Additionally, it aimed to analyze the changes occurring after alignment and leveling performed with MBT technique. METHODS: The sample of normal occlusions comprised 32 lateral teleradiographs, while the sample of malocclusions comprised 38 initial and post-leveling lateral teleradiographs. RESULTS: The results did not show statistically significant differences between morphological characteristics of the normal occlusion group and the malocclusion group. On the other hand, after alignment and leveling, statistically significant reduction was observed in distocervical inclinations with extrusion of the distal portion of upper second molars.

OBJETIVO: a proposta do presente trabalho foi comparar as angulações distocervicais das coroas dos segundos molares superiores de um grupo com oclusão normal e outro composto de más oclusões de Classes I e II de Angle, e analisar as modificações ocorridas após o alinhamento e nivelamento com a técnica MBT. MÉTODOS: a amostra de oclusão normal foi composta por 32 telerradiografias laterais; e a amostra de má oclusão constituiu-se de 38 telerradiografias laterais iniciais e pós-nivelamento. RESULTADOS: os resultados não mostraram diferença estatisticamente significativa entre as características morfológicas dos grupos com oclusão normal e com má oclusão; porém, após o alinhamento e nivelamento, observamos redução estatisticamente significativa nas inclinações distocervicais, com extrusão da porção distal dos segundos molares superiores.

Assessing the predictability of ANB, 1-NB, P-NB and 1-NA measurements on Steiner cephalometric analysis

OBJECTIVE: To evaluate, in the initial and final stages of corrective orthodontic treatment, the predictability of the ANB, 1-NB, PNB and 1-NA during case individualization, which considers the characteristics of the patient, professional experience and the mechanics to be used. METHODS: Ninety patients were selected at the State University of Londrina (UEL, Brazil), presenting Angle Class I and II malocclusions, treated with and without extraction of four premolars and divided into three groups: Horizontal, balanced and vertical. The cephalometric variables were evaluated in the initial, prognosis and final stages of treatment in order to observe the behavior of the estimates, or how they were higher or lower than the values obtained. RESULTS: It was noticed the influence of the facial pattern on the behavior of the measures examined, the values proposed for the ANB were statistically different from values obtained at the end of the treatment; in the vertical group the final value was the one that most approached the proposed value; regarding 1-NB the values proposed with the Steiner analysis for the balanced and vertical groups were not achieved. For P-NB, there was no difference between genders. For 1-NA it was observed that the values obtained at the end of treatment differ from estimates in the three groups. CONCLUSIONS: The limitations of the estimates of the measures do not invalidate its clinical or teaching use, if aware of its deficiencies, the analysis can be used with restrictions.

OBJETIVO: avaliar, nas fases inicial e final de tratamento ortodôntico corretivo, a previsibilidade das medidas ANB, 1-NB, P-NB, e 1-NA durante a individualização dos casos, onde se consideram as características inerentes do paciente, bem como a experiência do profissional e a mecânica a ser utilizada. MÉTODOS: foram selecionados 90 pacientes, tratados na UEL, apresentando Classes I e II de Angle, tratados com e sem extrações de quatro pré-molares e divididos em três grupos: horizontal, equilibrado e vertical. As grandezas cefalométricas foram avaliadas nas fases inicial, proposta e final de tratamento, com o intuito de observar o comportamento das estimativas, ou seja, o quanto elas foram maiores ou menores que os valores obtidos. RESULTADOS: constatou-se influência do padrão facial no comportamento das medidas analisadas; os valores propostos para o ANB foram estatisticamente diferentes dos valores obtidos ao final do tratamento; no grupo vertical, o valor final foi o que mais se aproximou do valor proposto; em relação à medida 1-NB, os valores propostos durante a elaboração da análise de Steiner para os grupos equilibrado e vertical não foram alcançados. Para medida PNB, não se observou diferença entre os sexos. Na medida 1-NA, foi observado que os valores obtidos ao final do tratamento diferem das estimativas nos três grupos analisados. CONCLUSÃO: as limitações das estimativas das medidas não invalidam seu emprego clínico ou didático, desde que, conscientes de suas deficiências, sejam utilizadas com restrições.

Dental arch widths in class I normal occlusion and class II division 1 malocclusion

The purpose of this study was to compare dental arch widths Class II division 1 malocclusion with normal Class I occlusion subjects. The Intercanine, Interpremolar and intermolar widths were measured on 100 dental casts [50 class I and 50 class II/1 malocclusion subjects]. The data was developed on SPSS 16 for windows. Independent-samples t-test was applied for comparison of the groups. Lower Intercanine width was larger in class II/1 malocclusion and Intermolar width was significantly increased in call I normal occlusion group. Interpremolar width between the two groups did not reveal any significant difference. Lower intercanine width was significantly larger in class II/1 and Maxillary intermolar width was significantly narrower in class II/1 malocclusion subjects

Relationship between dental arch widths and mandibular plane angle in untreated adults with skeletal class II malocclusion

To investigate the arch width in untreated Class II subjects with average and high mandibular plane angles. Cross sectional comparative study. The study was conducted in the orthodontics department of Armed forces institute of Dentistry Rawalpindi from Sep 2008 to March 2009. Pretreatment dental casts and cephalograms of skeletal class II patients with complete set of permanent dentition except third molars reporting to the OPD of Orthodontic department were selected. Records of 60 patients [30 high angle, 30 normal angle] were randomly selected out of the 240 records studied. Intermolar and intercanine widths were measured in millimeters using digital calipers. Mandibular plane angle was measured from cephalometric tracings using the SN Mandibular plane [CoGn SN] angle as used in Steiner's analysis. The mean intermolar width for the normal angle group was 49.18 +/- 2.69 mm and 48.56 +/- 4.44mm for the high angle group. The mean intercanine width for the normal angle group was 34.41 +/- 2.33mm and for the high angle group it was 33.13 +/- 2.60mm. Independent t test failed to show any significant [p > 0.05] difference in the IMW between normal and high angle patients. However a significant [p < 0.05] difference was observed in the intercanine width of the normal and high angle groups. In our study there was no significant difference of intermolar width whereas significant difference of intercanine width was found between normal and high angle cases

Class II malocclusion occlusal severity description

OBJECTIVES: It is well known that the efficacy and the efficiency of a Class II malocclusion treatment are aspects closely related to the severity of the dental anteroposterior discrepancy. Even though, sample selection based on cephalometric variables without considering the severity of the occlusal anteroposterior discrepancy is still common in current papers. In some of them, when occlusal parameters are chosen, the severity is often neglected. The purpose of this study is to verify the importance given to the classification of Class II malocclusion, based on the criteria used for sample selection in a great number of papers published in the orthodontic journal with the highest impact factor. MATERIAL AND METHODS: A search was performed in PubMed database for full-text research papers referencing Class II malocclusion in the history of the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO). RESULTS: A total of 359 papers were retrieved, among which only 72 (20.06 percent) papers described the occlusal severity of the Class II malocclusion sample. In the other 287 (79.94 percent) papers that did not specify the anteroposterior discrepancy severity, description was considered to be crucial in 159 (55.40 percent) of them. CONCLUSIONS: Omission in describing the occlusal severity demands a cautious interpretation of 44.29 percent of the papers retrieved in this study.