Climatic variability and morbidity and mortality associated with particulate matter / Variabilidade climática aumenta a morbimortalidade associada ao material particulado

ABSTRACT OBJECTIVE The objective of this study has been to analyze whether fine particulate matter (PM2.5), as well as its synergistic effect with maximum temperature, humidity, and seasons, is associated with morbidity and mortality from cardiovascular diseases. METHODS This is an ecological study of time series. We have used as outcomes the daily death and hospitalization records of adults aged 45 years and over from 2009 to 2011 of the municipalities of Cuiabá and Várzea Grande, State of Mato Grosso, Brazil. We have used Poisson regression using generalized additive models, assuming a significance level of 5%. The model has been controlled for temporal trend, seasonality, average temperature, humidity, and season effects. Daily concentrations of PM2.5 (particulate material with aerodynamic diameter less than 2.5 micrometers) have been obtained by converting the values of optical aerosol thickness. Maximum temperature, humidity, and seasons have been separately included in the model as dummy variables for the analysis of the synergistic effect of PM2.5 with morbidity and mortality from cardiovascular disease. We have calculated the percentage increase of relative risk (%RR) of deaths and hospitalizations for the linear increase of 10 μg/m3 of PM2.5. RESULTS Between 2009 and 2011, the increase in PM2.5 was associated with a %RR 2.28 (95%CI 0.53-4.06) for hospitalizations on the same day of exposure and RR% 3.57 (95%CI 0.82-6.38) for deaths with a lag of three days. On hot days, %RR 4.90 (95%CI -0.61-9.38) was observed for deaths. No modification of the effect of PM2.5 was observed for maximum temperature in relation to hospitalizations. On days with low humidity, %RR was 5.35 (95%CI -0.20-11.22) for deaths and 2.71 (95%CI -0.39-5.92) for hospitalizations. In the dry season, %RR was 2.35 (95%CI 0.59-4.15) for hospitalizations and 3.43 (95%CI 0.58-6.35) for deaths. CONCLUSIONS The PM2.5 is associated with morbidity and mortality from cardiovascular diseases and its effects may be potentiated by heat and low humidity and during the dry season.

RESUMO OBJETIVO Analisar se o material particulado fino (PM2,5), bem como seu efeito sinérgico com a temperatura máxima, a umidade e as estações do ano estão associados à morbimortalidade por doenças cardiovasculares. MÉTODOS Estudo ecológico de séries temporais. Foram utilizados como desfechos os registros diários de óbito e internação em adultos com 45 anos ou mais de idade para os anos de 2009 a 2011 nos municípios de Cuiabá e Várzea Grande, Mato Grosso, Brasil. Utilizou-se regressão de Poisson via modelos aditivos generalizados, assumindo-se um nível de significância de 5%. O modelo foi controlado para tendência temporal, sazonalidade, temperatura média, umidade e efeitos de calendário. Concentrações diárias de PM2,5 (material particulado com diâmetro aerodinâmico inferior a 2,5 micrômetros) foram obtidas por meio da conversão dos valores da espessura ótica de aerossóis. Temperatura máxima, umidade e estações do ano foram incluídas separadamente ao modelo como variáveis indicadoras para análise do efeito sinérgico do PM2,5 com a morbimortalidade por doenças cardiovasculares. Foi calculado o aumento percentual de risco relativo (%RR) dos óbitos e internações para o aumento linear de 10 μg/m3 de PM2,5. RESULTADOS Entre 2009 e 2011, o aumento de PM2,5 foi associado a um %RR 2,28 (IC95% 0,53-4,06) para internações no mesmo dia de exposição e %RR 3,57 (IC95% 0,82-6,38) para óbitos com uma defasagem de três dias. Em dias quentes, observou-se %RR 4,90 (IC95% -0,61-9,38) para óbitos. Não foi observada modificação de efeito do PM2,5 pela temperatura máxima relacionada as internações. Em dias com baixa umidade, o %RR foi 5,35 (IC95% -0,20-11,22) para óbitos e 2,71 (IC95% -0,39-5,92) para internações. Na estação seca, o %RR foi 2,35 (IC95% 0,59-4,15) para internações e 3,43 (IC95% 0,58-6,35) para óbitos. CONCLUSÕES O PM2,5 está associado à morbimortalidade por doenças cardiovasculares e seus efeitos podem ser potencializados pelo calor, pela baixa umidade e durante a estação seca.

Chemical composition modulates the adverse effects of particles on the mucociliary epithelium

OBJECTIVE:We compared the adverse effects of two types of real ambient particles; i.e., total suspended particles from an electrostatic precipitator of a steel mill and fine air particles from an urban ambient particulate matter of 2.5 µm, on mucociliary clearance.METHOD:Mucociliary function was quantified by mucociliary transport, ciliary beating frequency and the amount of acid and neutral mucous in epithelial cells through morphometry of frog palate preparations. The palates were immersed in one of the following solutions: total suspended particles (0.1 mg/mL), particulate matter 2.5 µm 0.1 mg/mL (PM0.1) or 3.0 mg/mL (PM3.0) and amphibian Ringer’s solution (control). Particle chemical compositions were determined by X-ray fluorescence and gas chromatography/mass spectrometry.RESULTS:Exposure to total suspended particles and PM3.0 decreased mucociliary transport. Ciliary beating frequency was diminished by total suspended particles at all times during exposure, while particulate matter of 2.5 µm did not elicit changes. Particulate matter of 2.5 µm reduced epithelial mucous and epithelium thickness, while total suspended particles behaved similarly to the control group. Total suspended particles exhibited a predominance of Fe and no organic compounds, while the particulate matter 2.5 µm contained predominant amounts of S, Fe, Si and, to a lesser extent, Cu, Ni, V, Zn and organic compounds.CONCLUSION:Our results showed that different compositions of particles induced different airway epithelial responses, emphasizing that knowledge of their individual characteristics may help to establish policies aimed at controlling air pollution.

Environmental Source of Arsenic Exposure / 예방의학회지

Arsenic is a ubiquitous, naturally occurring metalloid that may be a significant risk factor for cancer after exposure to contaminated drinking water, cigarettes, foods, industry, occupational environment, and air. Among the various routes of arsenic exposure, drinking water is the largest source of arsenic poisoning worldwide. Arsenic exposure from ingested foods usually comes from food crops grown in arsenic-contaminated soil and/or irrigated with arsenic-contaminated water. According to a recent World Health Organization report, arsenic from contaminated water can be quickly and easily absorbed and depending on its metabolic form, may adversely affect human health. Recently, the US Food and Drug Administration regulations for metals found in cosmetics to protect consumers against contaminations deemed deleterious to health; some cosmetics were found to contain a variety of chemicals including heavy metals, which are sometimes used as preservatives. Moreover, developing countries tend to have a growing number of industrial factories that unfortunately, harm the environment, especially in cities where industrial and vehicle emissions, as well as household activities, cause serious air pollution. Air is also an important source of arsenic exposure in areas with industrial activity. The presence of arsenic in airborne particulate matter is considered a risk for certain diseases. Taken together, various potential pathways of arsenic exposure seem to affect humans adversely, and future efforts to reduce arsenic exposure caused by environmental factors should be made.

Environmental Source of Arsenic Exposure / 예방의학회지

Arsenic is a ubiquitous, naturally occurring metalloid that may be a significant risk factor for cancer after exposure to contaminated drinking water, cigarettes, foods, industry, occupational environment, and air. Among the various routes of arsenic exposure, drinking water is the largest source of arsenic poisoning worldwide. Arsenic exposure from ingested foods usually comes from food crops grown in arsenic-contaminated soil and/or irrigated with arsenic-contaminated water. According to a recent World Health Organization report, arsenic from contaminated water can be quickly and easily absorbed and depending on its metabolic form, may adversely affect human health. Recently, the US Food and Drug Administration regulations for metals found in cosmetics to protect consumers against contaminations deemed deleterious to health; some cosmetics were found to contain a variety of chemicals including heavy metals, which are sometimes used as preservatives. Moreover, developing countries tend to have a growing number of industrial factories that unfortunately, harm the environment, especially in cities where industrial and vehicle emissions, as well as household activities, cause serious air pollution. Air is also an important source of arsenic exposure in areas with industrial activity. The presence of arsenic in airborne particulate matter is considered a risk for certain diseases. Taken together, various potential pathways of arsenic exposure seem to affect humans adversely, and future efforts to reduce arsenic exposure caused by environmental factors should be made.

Airborne agricultural particulate matter induces inflammatory cytokine secretion by respiratory epithelial cells: Mechanisms of regulation by eicosanoid lipid signal mediators.

The purpose of this study was to elucidate the mechanism of the airborne poultry dust (particulate matter, PM)-induced respiratory tract inflammation, a common symptom in agricultural respiratory diseases. The study was based on the hypothesis that poultry PM would induce the release of inflammatory cytokine interleukin-8 (IL-8) by respiratory epithelial cells under the upstream regulation by cytosolic phospholipase A2 (cPLA2) activation and subsequent formation of cyclooxygenase (COX)- and lipoxygenase (LOX)-catalyzed arachidonic acid (AA) metabolites (eicosanoids). Human lung epithelial cells (A549) in culture were treated with the poultry PM (0.1-1.0 mg) for different lengths of time, following which PLA2 activity, release of eicosanoids and secretion of IL-8 in cells were determined. Poultry PM (1.0 mg/ml) caused a significant activation of PLA2 in a time-dependent manner (15-60 min), which was significantly attenuated by the calcium-chelating agents, cPLA2-specific inhibitor (AACOCF3) and antioxidant (vitamin C) in A549 cells. Poultry PM also significantly induced the release of COX- and LOX-catalyzed eicosanoids (prostaglandins, thromboxane A2 and leukotrienes B4 and C4) and upstream activation of AA LOX in the cells. Poultry PM also significantly induced release of IL-8 by the cells in a dose- and time-dependent manner, which was significantly attenuated by the calcium chelating agents, antioxidants and COX- and LOX-specific inhibitors. The current study for the first time revealed that the poultry PM-induced IL-8 release from the respiratory epithelial cells was regulated upstream by reactive oxygen species, cPLA2-, COX- and LOX-derived eicosanoid lipid signal mediators.

PM10 Exposure and Non-accidental Mortality in Asian Populations: A Meta-analysis of Time-series and Case-crossover Studies / 예방의학회지

OBJECTIVES: We investigated the association between particulate matter less than 10 microm in aerodynamic diameter (PM10) exposure and non-accidental mortality in Asian populations by meta-analysis, using both time-series and case-crossover analysis. METHODS: Among the 819 published studies searched from PubMed and EMBASE using key words related to PM10 exposure and non-accidental mortality in Asian countries, 8 time-series and 4 case-crossover studies were selected for meta-analysis after exclusion by selection criteria. We obtained the relative risk (RR) and 95% confidence intervals (CI) of non-accidental mortality per 10 microg/m3 increase of daily PM10 from each study. We used Q statistics to test the heterogeneity of the results among the different studies and evaluated for publication bias using Begg funnel plot and Egger test. RESULTS: Testing for heterogeneity showed significance (p<0.001); thus, we applied a random-effects model. RR (95% CI) per 10 microg/m3 increase of daily PM10 for both the time-series and case-crossover studies combined, time-series studies relative risk only, and case-crossover studies only, were 1.0047 (1.0033 to 1.0062), 1.0057 (1.0029 to 1.0086), and 1.0027 (1.0010 to 1.0043), respectively. The non-significant Egger test suggested that this analysis was not likely to have a publication bias. CONCLUSIONS: We found a significant positive association between PM10 exposure and non-accidental mortality among Asian populations. Continued investigations are encouraged to contribute to the health impact assessment and public health management of air pollution in Asian countries.

Cyclic settlement behavior of strip footings resting on reinforced layered sand slope

The paper presents a study of the behavior of model strip footings supported on a loose sandy slope and subjected to both monotonic and cyclic loads. The effects of the partial replacement of a compacted sand layer and the inclusion of geosynthetic reinforcement were investigated. Different combinations of the initial monotonic loads and the amplitude of cyclic loads were chosen to simulate structures in which loads change cyclically such as machine foundations. The affecting factors including the location of footing relative to the slope crest, the frequency of the cyclic load and the number of load cycles were studied. The cumulative cyclic settlement of the model footing supported on a loose sandy slope, un-reinforced and reinforced replaced sand deposits overlying the loose slope were obtained and compared. Test results indicate that the inclusion of soil reinforcement in the replaced sand not only significantly increases the stability of the sandy slope itself but also decreases much both the monotonic and cumulative cyclic settlements leading to an economic design of the footings. However, the efficiency of the sand-geogrid systems depends on the properties of the cyclic load and the location of the footing relative to the slope crest. Based on the test results, the variation of cumulative settlements with different parameters is presented and discussed

Nivel de níquel urinario en niños residentes en ciudades cercanas a megafuentes / Urinary nickel in children exposed to petcoke pollution

Background: Petcoke is a remmant of the oil refiningprocess that contains Ni and other heavy metáis. Undesired human exposure to these compounds may result from petcoke combustión in plants located in the vicinity ofthe cities. Aim: To compare levéis of urinary Ni in schoolchildren residing in cities exposed and not exposed to petcoke pollution. Material and methods: A cross sectional study was done in schoolchildren aged 7 to 8 years oíd in two cities in northern Chile: Mejillones (n = 59), near to a petcoke plant and Tocopilla (n = 56) as the reference city. First, morning urinary samples were collected and urinary Ni was determined by Atomic Absorption Spectrometry. Socioeconomic and environmental exposure information of families was obtained applying a questionnaire to parents. Múltiple linear regression was performed to identify other variables that may explain urinary Ni differences among the cities. Results: Median level of Ni was higher in Mejillones (4.9 fig/L) than in Tocopilla (3.9 fig/L). Residing in the exposed city was the most important explaining factor (B = 0.26; IC 0.107 - 0.428). Additionally years of residency was associated with urinary Ni (B = 0.03; IC 0.004 - 0.060). Conclusions: Urinary Ni in schoolchildren is higher in the city exposed to petcoke emissions. The difference does not imply that there are concrete hazards for the population s health. However, it warns about the existence of a higher exposure in places where petcoke is used.

Adsorption of fluoride on synthetic iron (III), zirconium(IV) and binary iron(III)-zirconium (IV) oxides: comparative assessment on pH effect and isotherm.

Fluoride is an accumulative poison at high dose of intake for humans and animals. In the present study, the sorption of fluoride from aqueous solution has been investigated on synthetic hydrous ferric oxide (HFO), hydrous zirconium oxide (HZO) and hydrous zirconium(IV)-iron(III) oxide (HZFO) by batch mode experiments. Both HFO and HZFO were crystalline and HZO was amorphous in nature. The parametes studied were the effect of pH and sorption equilibriums. The results showed increase in fluoride-sorption with increasing pH from nearly 2.0 to 5.0, 4.6 and 6.8 for HFO, HZO and HZFO, respectively. Analysis of temperature dependent sorption data obtained at equilibrium solution pH 6.8 (+/- 0.2) has been described by the Langmuir, Freundlich, Temkin and Redlich-Peterson isotherm model equations. The present sorption data fit, in general, found very well with the Langmuir and Redlich-Peterson models; and the data fit for HZFO and HFO found to increase, but for HZO the data found to decrease with increasing temperature. The computed thermodynamic parameters such as deltaG0, delltaH0 and deltaS0 from the Langmuir equilibrium constant (b, L/Umg) values show that the fluoride-sorption on HZFO was more spontaneous and endothermic process compared to HFO. The deltaH0 value obtained for fluoride adsorption on HZO indicates exothermic nature.

Heavy metals leaching in Indian fly ash.

Fly ash is an industrial waste generated from thermal power plants. Fly ash constitutes 80-85% of the total ash produced. A small part of fly ash is utilised in some sectors such as construction materials, building engineering, road, back fill, agriculture, selective engineering and processing useful materials. A large part of fly ash produced is disposed of with very high environmental risk. In the present paper, laboratory leaching test has been used to determine the potential mobility of Pb, Cd, Cr, Cu, Zn, Fe, Mn and Ni in fly ash samples, collected from Chandrapura Thermal Power Plant, Jharkhand and Ramagundam Super Thermal Power Plant, Andhra Pradesh, in order to assess their leachability when these wastes are disposed of. A cascade-leaching test was used at liquid-to-solid ratio (L/S) ranging between 20 and 100. Both fly ash samples exhibited neutral reactions, as indicated by pH values <11.75 and >7.0 at L/S=10 and contact time of 10 minutes. The percentage of leached amounts found to follow the trend Zn>Fe>Mn>Cr>Pb>Cu>Ni>Cd for fly ash from Chandrapura and Fe>Zn>Cu>Mn>Cr>Ni>Pb>Cd for fly ash from Ramagundam. Effect of pH on metals released from ash surface in aqueous solution followed a predictable pattern of decreasing release with increasing pH.