Verification of photon beam field absorbed dose and two-dimensional dose distribution in intensity modulated radiotherapy in Sichuan province / 中华放射医学与防护杂志

ABSTRACT

Objective To measure absorbed dose and verify two-dimensional dose distribution from IMRT MLC using thermoluminescence dosimeters (TLDs) and films.Methods The teflon phantom was scanned by CT and its images were transmitted to TPS for planning.The 6 Gy-corresponding MUs were calculated at 90 cm SSD and 10 cm depth and on 5 cm × 5 cm radiation field.All the plans were implemented at 7 medical linear accelerators,which were produced by Varian,Elekta and Siemens and selected from 7 third-grade first-class hospitals according to the technical conditions of various regions in Sichuan province.The homogeneous solid phantoms used in hospitals were covered by 30 cm × 30 cm and 25 cm × 25 cm films.Then,the films were covered by thicker-than-20 cm phantoms.Finally,the plans were implemented by aligning the center of beams to the films center.Results The relative deviations of the measured absorbed dose to TPS-planned dose were 1.4％,3.7％,-2.5％,-0.3％,4.9％,4.9％,5.0％ for TLDs and 4.7％,4.3％,1.5％,3.9％,-1.6％,3.3％,-1.3％ for films,respectively,all consistent with the limit of less than 5％.The passing rates of 2D dose distribution (3 mm/3％) were 99.9％,98.5％,98.5％,97.9％ and 70.0％ for 5 accelerators,with only one not consistent with the requirements.Conclusions It is convenient to measure the absorbed dose to photon beam field and verify two-dimensional dose distribution using TLDs and films,which can provide quality assurance for radiation treatment plans.