Experimental analysis of clinical applicability of individualized customized materials / 中国辐射卫生

ABSTRACT

@#<b>Objective</b> To study the feasibility of clinical application of an individualized customized material. <b>Methods</b> Five batches of individualized customized materials were randomly selected, from which 10 cm × 11 cm samples were intercepted for experimental analysis. Among them, 10 cm × 10 cm materials were selected to perform dosimetric analysis and HU change analysis before and after irradiation with a radiotherapy dose for breast cancer of 50 Gy as the irradiation basis. The center Point 1 on the lower surface of the individualized material and the center Point 2 of the solid water volume were selected for dosimetric analysis before and after the sample is irradiated. After reaching a sufficient amount of irradiation, the 1 cm × 10 cm materials intercepted in the center position and the remaining 1 cm × 10 cm materials after the first sampling were sent to the material science laboratory for analysis of physical properties of density, viscosity, hardness, and tear strength. <b>Results</b> In the comparative analysis of HU values before and after exposure, after receiving 50 Gy dose irradiation, the difference rate of HU value was 5.252%, which was close to the expected 5% difference rate in clinical medicine. In the dosimetric analysis of Point 1 and Point 2, the dose in the irradiated samples was significantly higher than that in the unirradiated samples; the dose in Point 1 increased by 3.742%, and the dose in Point 2 increased by 2.039%. Before and after irradiation, except for the physical density which showed a significant difference, there was no significant difference in viscosity, hardness, and tear strength. <b>Conclusion</b> The individualized customized material can meet the requirements of routine clinical medicine.