Fracture resistance and strain analysis of zirconia copings with vertical knife edge and three horizontal finish line designs; chamfer, deep chamfer and shoulder with two cementation techniques / Resistência à fratura e análise de deformação de copings de zircônia com término cervical em lâmina de faca e três términos horizontais; chanfro, chanfro largo e ombro com duas técnicas de cimentação
Braz. dent. sci
;
24(4): 1-10, 2021. tab, ilus, graf
Artículo
en Inglés
| LILACS, BBO
| ID: biblio-1293129
ABSTRACT
Objective:
The purpose of this in vitro study is to evaluate the effect of four finish line configurations and two cement types on the fracture resistance of zirconia copings. Material andMethods:
Forty yttrium tetragonal zirconia polycrystals copings were manufactured on epoxy resin dies with four preparation designs knife edge, chamfer, deep chamfer 0.5, 1 mm and shoulder 1 mm. The copings were cemented with two cement types (glass ionomer and resin cement); (n = 5). Two strain gauges were attached on each coping before they were vertically loaded till fracture with a universal testing machine. Data were analyzed by 2-way analysis of variance ANOVA (p < .05). Fractured specimens were examined for mode of failure with digital microscope.Results:
Knife edge showed the highest mean fracture resistance (987.04 ± 94.18) followed by Chamfer (883.28 ± 205.42) followed by Shoulder (828.64 ± 227.79) and finally Deep chamfer finish line (767.66 ± 207.09) with no statistically significant difference. Resin cemented copings had higher mean Fracture resistance (911.76 ± 167.95) than glass ionomer cemented copings (821.55 ± 224.24) with no statistically significant difference. Knife edge had the highest strain mean values on the buccal (374.04 ± 195.43) and lingual (235.80 ± 103.46) surface. Shoulder finish line showed the lowest mean strain values on the buccal (127.47 ± 40.32) and lingual (68.35 ± 80.68) with no statistically significant difference. Resin cemented copings had higher buccal (295.05 ± 167.92) and lingual (197.38 ± 99.85) mean strain values than glass ionomer copings (149.14 ± 60.94) and (90.27 ± 55.62) with no statistically significant difference.Conclusion:
Vertical knife edge finish line is a promising alternative and either adhesive or conventional cementation can be used with zirconia copings (AU)RESUMO
Objetivo:
O objetivo deste estudo in vitro é avaliar o efeito de quatro configurações de términos cervicais e dois tipos de cimentos na resistência à fratura de copings de zircônia. Material eMétodos:
Quarenta copings de zircônia tetragonal policristalina estabilizada por ítrio foram confeccionados em matrizes de resina epóxi com quatro tipos de términos cervicais lâmina de faca, chanfro, chanfro largo 0,5, 1 mm e ombro 1 mm. Os copings foram cimentados com dois tipos de cimento (ionômero de vidro e cimento resinoso); (n = 5). Dois extensômetros foram fixados em cada coping antes de serem carregados verticalmente até a fratura com uma máquina de teste universal. Os dados foram analisados por análise de variância ANOVA 2 fatores (p < 0,05). Os espécimes fraturados foram examinados quanto ao modo de falha com microscópio digital.Resultados:
A Lâmina de faca apresentou a maior média de resistência à fratura (987,04 ± 94,18) seguida pelo Chanfro (883,28 ± 205,42), pelo Ombro (828,64 ± 227,79) e finalmente o Chanfro largo (767,66 ± 207,09), sem diferença estatisticamente significativa. Os copings cimentados com cimento resinoso apresentaram maior média de resistência à fratura (911,76 ± 167,95) em relação aos copings cimentados com ionômero de vidro (821,55 ± 224,24), sem diferença estatisticamente significativa. A lâmina de faca apresentou os maiores valores médios de deformação na superfície vestibular (374,04 ± 195,43) e lingual (235,80 ± 103,46). O término em ombro apresentou os menores valores médios de deformação na superfície vestibular (127,47 ± 40,32) e lingual (68,35 ± 80,68), sem diferença estatisticamente significativa. Os copings cimentados com resina apresentaram maiores valores médios de deformação na superfície vestibular (295,05 ± 167,92) e lingual (197,38 ± 99,85) do que os copings cimentados com ionômero de vidro (149,14 ± 60,94) e (90,27 ± 55,62), sem diferença estatisticamente significativa.Conclusão:
O término cervical em lâmina de faca é uma alternativa promissora e a cimentação adesiva ou convencional pode ser usada na cimentação de copings de zircônia. (AU)
Texto completo:
Disponible
Índice:
LILACS (Américas)
Asunto principal:
Prostodoncia
/
Circonio
/
Cementación
/
Preparación del Diente
/
Resistencia Flexional
Idioma:
Inglés
Revista:
Braz. dent. sci
Asunto de la revista:
Odontología
/
Sa£de Bucal
Año:
2021
Tipo del documento:
Artículo
País de afiliación:
Egipto
Institución/País de afiliación:
Ain Shams University/EG
/
Misr International University/EG
Similares
MEDLINE
...
LILACS
LIS