Short implants to support mandibular complete dentures - photoelastic analysis
Braz. oral res. (Online)
;
31: e18, 2017. tab, graf
Artículo
en Inglés
| LILACS
| ID: biblio-839500
ABSTRACT
Abstract This study evaluated the stress behavior around short implants in edentulous atrophic mandibles. Six groups included implants with two diameters regular and wide (4 and 5 mm) and three lengths (5, 7 and 9 mm) as follows Ci9 (9 x 4 mm), Ci7 (7 x 4 mm), Ci5 (5 x 4 mm), Wi9 (9 x 5 mm), Wi7 (7 x 5 mm) and Wi5 (5 x 5 mm). These groups were compared to the control group CG (11 x 4 mm). The analysis was performed with the photoelastic method (n = 6). Each model comprised 4 implants with the same length and diameter connected by a chromium-cobalt bar that simulates a fixed denture. A 0.15 kg force was applied at the end of the cantilever (15 mm), and the maximum shear stress was recorded around the distal and subsequent implants. The stress values were determined, and the quantitative data (Fringes®) were submitted to statistical analysis with one-way ANOVA and the Dunnett test (p < 0.05). It was observed that the reduction in implant length increased stress values with a significant difference (p < 0.05) between CG Ci7 and Ci5, while the increase in implant diameter reduced the stress values without any differences found between short and long implants. Implants with 5 and 7 mm with regular diameter increased stress levels while short implants with larger diameters experienced similar stress to that of longer implants.
Texto completo:
Disponible
Índice:
LILACS (Américas)
Asunto principal:
Implantes Dentales
/
Prótesis Dental de Soporte Implantado
/
Análisis del Estrés Dental
Tipo de estudio:
Estudios de evaluación
Idioma:
Inglés
Revista:
Braz. oral res. (Online)
Asunto de la revista:
Odontología
Año:
2017
Tipo del documento:
Artículo
/
Documento de proyecto
País de afiliación:
Brasil
Institución/País de afiliación:
Universidade de Campinas/BR
Similares
MEDLINE
...
LILACS
LIS