Diameter and length double objectives robust analysis of cylinder dental implant / 华西口腔医学杂志
West China Journal of Stomatology
;
(6): 358-361, 2007.
Artículo
en Chino
| WPRIM
| ID: wpr-348049
ABSTRACT
<p><b>OBJECTIVE</b>To determine the jaw bone stress variation affected by cylinder implant diameter and length simultaneously in Ansys DesignXplorer module.</p><p><b>METHODS</b>Finite element model of segment mandible with a cylinder implant was created. The range of the implant diameter (D) and length (L) were set from 2.5 mm to 5.0 mm and from 6.0 mm to 16.0 mm respectively. The maximum Von Mises stresses in jaw bone and sensitivity to D and L were evaluated.</p><p><b>RESULTS</b>Under axial (buccolingual) load, when one variable equaled to median, the amplification of maximum Von Mises stresses in cortical bone and cancellous bone were 44.66% (71.32%) and 51.45% (58.50%) respectively with the D increasing. The amplification of maximum Von Mises stresses in cortical bone and cancellous bone were 45.97% (21.66%) and 52.15% (37.75%) respectively with the L increasing. When D exceeded 3.7 mm and L exceeded 10.0 mm, the response curve curvatures of maximum Von Mises stresses to L and D in jaw bone ranged from -1 to 0. And the variation of the maximum Von Mises stresses in jaw bone was more sensitive to D than to L.</p><p><b>CONCLUSION</b>Stresses in jaw bone under buccolingual and axial load are apt to be affected by implant diameter and length respectively. And to a cylinder implant, the diameter exceeds 3.7 mm and length exceeds 10.0 mm are optimal selections. Diameter should pay more attention to than to length for cylinder implant. Expanding the width of the jaw bone is more important than expanding the height of the jaw bone in clinical experience.</p>
Texto completo:
Disponible
Índice:
WPRIM (Pacífico Occidental)
Asunto principal:
Estrés Mecánico
/
Fenómenos Biomecánicos
/
Implantes Dentales
/
Diseño de Prótesis Dental
/
Análisis de Elementos Finitos
/
Mandíbula
Tipo de estudio:
Estudio pronóstico
Límite:
Humanos
Idioma:
Chino
Revista:
West China Journal of Stomatology
Año:
2007
Tipo del documento:
Artículo
Similares
MEDLINE
...
LILACS
LIS