Comparative analysis of optical microscopy, scanning electron microscopy, and micro-computed tomography on measurements
Braz. j. oral sci
; 16: e17058, jan.-dez. 2017. ilus
Article
Dans En
| LILACS, BBO
| ID: biblio-883731
Responsable en Bibliothèque :
BR218.1
ABSTRACT
Abstract Microscopic measurements are widely used in scientific research and the correct equipment to perform these evaluations could be critical to determine study results. Regarding microscopic measurements, three of the most used methods are Optical Microscopy (OM), Scanning Electron Microscopy (SEM), and Micro-computed Tomography (MCT). It is important to select the best method for assessing diverse parameters, considering operational characteristics of the method, the equipment efficiency, and the machinery cost. Aim:
Therefore, the main objective of this study was to define which is the most useful measurement method for assessing magnitudes below 0.4 mm.Methods:
Ten dental implants, with known dimensions as defined by the manufacturer were randomly distributed. Two blinded observers assessed the distance between the second and the third screw vortex of the implants using three suggested methods. The true distance was defined to be 0.5 mm.Results:
The assessed distances were 0.597±0.007mm for OM, 0.578±0.017mm for SEM, and 0.613±0.006mm for MCT. The assessed distances were significantly different when the methods were compared (P>0.01). All measurements were into the CAD tolerances.Conclusion:
It was possible to conclude that linear easurements between 595 and 605 µm could be performed by any of the described technologies (AU)
Texte intégral:
1
Indice:
LILACS
Sujet Principal:
Implants dentaires
/
Microtomographie aux rayons X
/
Microscopie électrochimique à balayage
/
Microscopie
langue:
En
Texte intégral:
Braz. j. oral sci
Thème du journal:
ODONTOLOGIA
Année:
2017
Type:
Article