Polishing methods of an alumina-reinforced feldspar ceramic
Braz. dent. j
;
17(4): 285-289, 2006. ilus
Article
Dans Anglais
| LILACS
| ID: lil-442395
ABSTRACT
The purpose of this study was to test the hypothesis that mechanical polishing methods of ceramic surfaces allow similar superficial roughness to that of glazed surfaces. Twenty-five Vitadur Alpha ceramic discs (5 mm x 2 mm) were prepared according to the manufacturer's specifications. All specimens were glazed and randomly assigned to 5 groups (n=5), according to finishing and polishing protocols G1 glazed (control); G2 diamond bur finishing; G3 G2 + silicon rubber tip polishing; G4 G3 + felt disc/diamond polishing paste; G5 G3 + felt disc impregnated with fine-particle diamond paste. Next, surface roughness means (Ra - æm) were calculated. Qualitative analysis was made by scanning electron microscopy. Surface roughness data were submitted to ANOVA and Tukey's test at 5 percent significance level. G1 and G4 were statistically similar (p>0.05). G2 presented the highest roughness means (p<0.05) followed by groups G3, G5, G4 and G1 in a decreasing order. The hypothesis was partially confirmed as only the mechanical polishing (G4) produced similar superficial roughness to that of surface glazing, although finishing and polishing are technically critical procedures.
RESUMO
O objetivo deste estudo foi testar a hipótese de que o acabamento e o polimento da superfície cerâmica produzem rugosidade superficial semelhante à superfície cerâmica vitrificada. Vinte e cinco corpos-de-prova (5 mm x 2 mm) da cerâmica Vitadur Alpha foram obtidos de acordo com as recomendações do fabricante. Todas os corpos-de-prova foram vitrificados e aleatoriamente divididos em 5 grupos (n=5), de acordo com os seguintes protocolos de acabamento e polimento G1 vitrificação (controle); G2 abrasão com ponta diamantada; G3 G2 + acabamento com borrachas abrasivas; G4 G3 + polimento com pasta diamantada/disco de feltro; G5 G3 + disco de feltro impregnado com pasta diamantada. Após 6 análises individuais foi obtida 1 média por corpo-de-prova da rugosidade (Ra). A análise qualitativa foi realizada por microscopia eletrônica de varredura. Os valores médios de rugosidade foram submetidos à ANOVA e ao teste de Tukey com nível de significância de 5 por cento. G1 e G4 foram estatisticamente semelhantes (p>0.05). O grupo G2 apresentou o maior valor médio de rugosidade (p<0.05) seguido por G3, G5, G4 e G1 em ordem decrescente. A hipótese foi parcialmente confirmada, pois somente o polimento mecânico do grupo G4 produziu rugosidade superficial semelhante à da superfície vitrificada, embora o acabamento e o polimento sejam procedimentos críticos tecnicamente.
Texte intégral:
Disponible
Indice:
LILAS (Amériques)
Sujet Principal:
Céramiques
/
Composés du potassium
/
Polissage dentaire
/
Porcelaine dentaire
/
Oxyde d'aluminium
/
Silicates d'aluminium
Type d'étude:
Essai clinique contrôlé
/
Guide de pratique
/
Recherche qualitative
Limites du sujet:
Humains
langue:
Anglais
Texte intégral:
Braz. dent. j
Thème du journal:
Dentisterie
Année:
2006
Type:
Article
Pays d'affiliation:
Brésil
/
États-Unis d'Amérique
Institution/Pays d'affiliation:
Federal University of Santa Maria/BR
/
Institute of Energy and Nuclear Research/BR
/
São Paulo State University/BR
/
University of Alabama/US
Documents relatifs à ce sujet
MEDLINE
...
LILACS
LIS