A method of measuring the field output factor based on daisy-chaining / 中华放射肿瘤学杂志

ABSTRACT

Objective improve the accuracy of the measurement results by using the field output factor measurement method based on daisy-chaining.Methods The Varian Edge Accelerator 6 MV X-ray data were measured using the IBA CC13 ionization chamber, IBA CC01 ionization chamber, IBA Razor semiconductor detector , IBA EFD semiconductor detector and Gafchromic EBT 3 film , respectively. Results Compared with the daisy-chaining measurement method,the results obtained by the conventional measurement method using CC13 were smaller. The deviation value was 16. 71% in the 1 cm × 1 cm field. The measurement results in a larger field via CC01 were bigger with a deviation of 8. 39% in the 40 cm × 40 cm filed. The measurement results via Razor in a larger field were larger with a deviation of 9. 40% in the 40 cm × 40 cm field. The measurement results were similar between EFD and Razor with a deviation of 9. 14% in the 40 cm × 40 cm field. The results of the film measurement were equivalent to those obtained from the daisy-chaining method in a field of＞ 1 cm × 1 cm with a deviation within 1. 60%,whereas the deviation was increased to 3. 13% in the 1 cm× 1 cm field. The results were consistent with daisy-chaining measurement if the 3 cm × 3 cm or 4 cm × 4 cm fields were selected as the intermediate fields with the maximum deviation of 0. 29%. Conclusions For the detectors with changing response along with the field size,daisy-chaining measurement method can be utilized to extend the measurement range and improve the accuracy of the measurement results.