Verification of doses to PTV and OAR and 2D dose distribution in IMRT for 8 accelerators in Jiangsu province / 中华放射医学与防护杂志

ABSTRACT

Objective To validate the method for measuring the TPV and OAR doses and 2D dose distribution in IMRT through using TLD and radiochromic film.Methods Eight medical linear accelerators (Valian,Elekta,Siemens) were selected.The polystyrene phantom provided by IAEA was CT scanned and the image obtained was transferred to TPS for formulation of treatment plan,prescription of PTV and OAR doses and calculation of corresponding monitoring unit (MU),IMRT was performed on the phantom using 6 MV X-ray.Irradiated TLDs and films were measured and evaluated at the Secondary Standard Dosimetry Laboratory at the Radiation Safety Institute of Chinese Center for Disease Control and Prevention.Results According to IAEA requirement,the relative deviations between TLD-measured and TPS-planned doses were within ±7.0％ for the prescribed PTV and OAR doses.As measured result,the PTV values for 8 accelerators were in the range of 0.6％ to 5.9％,consistent with the IAEA requirements,whereas the OAT values for 8 accelerators were within-0.6％ to 7.0％,consistent the requirements.As IAEA required,the 2D dose distribution passing rate of 3 mm/3％ should be higher than 90％.The filmmeasured and TPS-planned values for 8 accelerators were within 90.2％ to 100.0％,consistent with the requirements.Conclusions TLD and radiochromic film are feasible in validating the PTV and OAR doses and the 2D dose distribution pass rate in IMRT.This method can be widely used in quality audit and internal verification in IMRT in medical institutiions on a large scale.