Analysis of the vibration reduction effect of three common protective gloves / 中国职业医学

ABSTRACT

OBJECTIVE: To test and analyze the vibration transmissivity of three common kinds of protective gloves, and to determine their actual protecting effect. METHODS: Three kinds of protective gloves were selected as test materials, and five healthy volunteers were selected as subjects using typical sampling methods. According to the ISO 108192013 Mechanical Vibration and Shock--Hand-arm Vibration--Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand(hereinafter referred to as ISO 108192013), investigation and measurement of basic parameters of protective gloves. The gloved vibration transmission(GVT) test system was used to test the vibration transmission of different protective gloves worn by the subjects, and the spectrum analysis of vibration reduction characteristics was carried out. RESULTS: The thickness of damping material of all the three kinds of protective gloves met the standard requirements. The mean value for the corrected frequency-weighted glove vibration transmissibility values at 25.0-200.0 Hz were 0.91, 0.75 and 0.94, and 1.05, 0.85 and 1.10 at 200.0-1 250.0 Hz, for the protective gloves A, B and C, respectively. The results of anti-vibration characteristic spectrum analysis show that there has no vibration reduction effect at the frequency of 25.0-200.0 Hz when wearing these three kinds of gloves. Wearing gloves A and B on part of the 200.0-1 250.0 Hz frequency vibration has an amplifying effect. Wearing glove C has a partial vibration reduction effect at the 200.0-1 250.0 Hz frequency, and the vibration reduction efficiency is the highest at the frequency of 1 250.0 Hz.CONCLUSION: According to the ISO 108192013 standard, the mean value of GVT measured when wearing the three kinds of protective gloves does not meet the relevant requirements, and the anti-vibration effect is poor. These gloves cannot be defined as anti-vibration gloves.