Detalles de la búsqueda
1.
Impact of radiographic field-of-view volume on alignment accuracy during virtual implant planning: A noninterventional retrospective pilot study.
Clin Oral Implants Res
; 33(10): 1021-1029, 2022 Oct.
Artículo
en Inglés
| MEDLINE | ID: mdl-35861131
2.
Comparison of automated digital Peer Assessment Rating compared with measurements performed by orthodontists, dental students, and assistants using plaster, additive manufactured, and digital models.
Eur J Orthod
; 44(5): 588-594, 2022 09 19.
Artículo
en Inglés
| MEDLINE | ID: mdl-35731637
3.
Dimensional accuracy of extrusion- and photopolymerization-based 3D printers: In vitro study comparing printed casts.
J Prosthet Dent
; 125(1): 103-110, 2021 Jan.
Artículo
en Inglés
| MEDLINE | ID: mdl-32063385
4.
Does ambient light affect the accuracy and scanning time of intraoral scans?
J Prosthet Dent
; 125(6): 924-931, 2021 Jun.
Artículo
en Inglés
| MEDLINE | ID: mdl-32487348
5.
Pandemic-Driven Development of a Medical-Grade, Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication.
Molecules
; 25(24)2020 Dec 15.
Artículo
en Inglés
| MEDLINE | ID: mdl-33333753
6.
Suitability and accuracy of CBCT model scan: an in vitro study.
Int J Comput Dent
; 20(4): 363-375, 2017.
Artículo
en Inglés
| MEDLINE | ID: mdl-29292411
7.
Accuracy of full-arch scans using intraoral and extraoral scanners: an in vitro study using a new method of evaluation.
Int J Comput Dent
; 20(2): 151-164, 2017.
Artículo
en Inglés
| MEDLINE | ID: mdl-28630956
8.
Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization.
J Mech Behav Biomed Mater
; 153: 106507, 2024 May.
Artículo
en Inglés
| MEDLINE | ID: mdl-38503082
9.
Analysis of soft tissue integration-supportive cell functions in gingival fibroblasts cultured on 3D printed biomaterials for oral implant-supported prostheses.
J Biomed Mater Res A
; 2024 Jan 22.
Artículo
en Inglés
| MEDLINE | ID: mdl-38251807
10.
Influence of planning software and template design on the accuracy of static computer assisted implant surgery performed using guides fabricated with material extrusion technology: An in vitro study.
J Dent
; 132: 104482, 2023 05.
Artículo
en Inglés
| MEDLINE | ID: mdl-36931618
11.
Measured accuracy of intraoral scanners is highly dependent on methodical factors.
J Prosthodont Res
; 66(2): 318-325, 2022 Apr 27.
Artículo
en Inglés
| MEDLINE | ID: mdl-34456211
12.
Cytotoxicity of polymers intended for the extrusion-based additive manufacturing of surgical guides.
Sci Rep
; 12(1): 7391, 2022 05 05.
Artículo
en Inglés
| MEDLINE | ID: mdl-35513701
13.
In Vitro Time Efficiency, Fit, and Wear of Conventionally- versus Digitally-Fabricated Occlusal Splints.
Materials (Basel)
; 15(3)2022 Jan 30.
Artículo
en Inglés
| MEDLINE | ID: mdl-35161032
14.
Accuracy of additively manufactured zirconia four-unit fixed dental prostheses fabricated by stereolithography, digital light processing and material jetting compared with subtractive manufacturing.
Dent Mater
; 38(9): 1459-1469, 2022 09.
Artículo
en Inglés
| MEDLINE | ID: mdl-35798578
15.
3D printed zirconia dental implants with integrated directional surface pores combine mechanical strength with favorable osteoblast response.
Acta Biomater
; 150: 427-441, 2022 09 15.
Artículo
en Inglés
| MEDLINE | ID: mdl-35902036
16.
Accuracy and its impact on fit of injection molded, milled and additively manufactured occlusal splints.
J Mech Behav Biomed Mater
; 114: 104179, 2021 02.
Artículo
en Inglés
| MEDLINE | ID: mdl-33189599
17.
Does Printing Orientation Matter? In-Vitro Fracture Strength of Temporary Fixed Dental Prostheses after a 1-Year Simulation in the Artificial Mouth.
Materials (Basel)
; 14(2)2021 Jan 07.
Artículo
en Inglés
| MEDLINE | ID: mdl-33430271
18.
Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials.
Dent Mater
; 37(5): 928-938, 2021 05.
Artículo
en Inglés
| MEDLINE | ID: mdl-33722400
19.
Polymers for conventional, subtractive, and additive manufacturing of occlusal devices differ in hardness and flexural properties but not in wear resistance.
Dent Mater
; 37(3): 432-442, 2021 03.
Artículo
en Inglés
| MEDLINE | ID: mdl-33288324
20.
Air seal performance of personalized and statistically shaped 3D-printed face masks compared with market-available surgical and FFP2 masks.
Sci Rep
; 11(1): 19347, 2021 09 29.
Artículo
en Inglés
| MEDLINE | ID: mdl-34588584