Supplementation of GelMA with Minimally Processed Tissue Promotes the Formation of Densely Packed Skeletal-Muscle-Like Tissues.

We present a simple and cost-effective strategy for developing gelatin methacryloyl (GelMA) hydrogels supplemented with minimally processed tissue (MPT) to fabricate densely packed skeletal-muscle-like tissues. MPT powder was prepared from skeletal muscle by freeze-drying, grinding, and sieving. Cell-culture experiments showed that the incorporation of 0.5-2.0% (w/v) MPT into GelMA hydrogels enhances the proliferation of murine myoblasts (C2C12 cells) compared to proliferation in pristine GelMA hydrogels and GelMA supplemented with decellularized skeletal-muscle tissues (DCTs). MPT-supplemented constructs also preserved their three-dimensional (3D) integrity for 28 days. By contrast, analogous pristine GelMA constructs only maintained their structure for 14 days or less. C2C12 cells embedded in MPT-supplemented constructs exhibited a higher degree of cell alignment and reached a significantly higher density than cells loaded in pristine GelMA constructs. Our results suggest that the addition of MPT incorporates a rich source of biochemical and topological cues, such as growth factors, glycosaminoglycans (GAGs), and structurally preserved proteins (e.g., collagen). In addition, GelMA supplemented with MPT showed suitable rheological properties for use as bioinks for extrusion bioprinting. We envision that this simple and cost-effective strategy of hydrogel supplementation will evolve into an exciting spectrum of applications for tissue engineers, primarily in the biofabrication of relevant microtissues for in vitro models and cultured meat and ultimately for the biofabrication of transplant materials using autologous MPT.

Advances and prospective applications of 3D food printing for health improvement and personalized nutrition.

Three-dimensional food printing (3DFP) uses additive manufacturing concepts to fabricate customized designed products with food ingredients in powder, liquid, dough, or paste presentations. In some cases, it uses additives, such as hydrocolloids, starch, enzymes, and antibrowning agents. Chocolate, cheese, sugar, and starch-based materials are among the most used ingredients for 3DFP, and there is a broad and growing interest in meat-, fruit-, vegetable-, insect-, and seaweed-based alternative raw materials. Here, we reviewed the most recent published information related to 3DFP for novel uses, including personalized nutrition and health-oriented applications, such as the use of 3D-printed food as a drug vehicle, and four-dimensional food printing (4DFP). We also reviewed the use of this technology in aesthetic food improvement, which is the most popular use of 3DFP recently. Finally, we provided a prospective and perspective view of this technology. We also reflected on its multidisciplinary character and identified aspects in which social and regulatory affairs must be addressed to fulfill the promises of 3DFP in human health improvement.

Controlling cellular organization in bioprinting through designed 3D microcompartmentalization.

Controlling cellular organization is crucial in the biofabrication of tissue-engineered scaffolds, as it affects cell behavior as well as the functionality of mature tissue. Thus far, incorporation of physiochemical cues with cell-size resolution in three-dimensional (3D) scaffolds has proven to be a challenging strategy to direct the desired cellular organization. In this work, a rapid, simple, and cost-effective approach is developed for continuous printing of multicompartmental hydrogel fibers with intrinsic 3D microfilaments to control cellular orientation. A static mixer integrated into a coaxial microfluidic device is utilized to print alginate/gelatin-methacryloyl (GelMA) hydrogel fibers with patterned internal microtopographies. In the engineered microstructure, GelMA compartments provide a cell-favorable environment, while alginate compartments offer morphological and mechanical cues that direct the cellular orientation. It is demonstrated that the organization of the microtopographies, and consequently the cellular alignment, can be tailored by controlling flow parameters in the printing process. Despite the large diameter of the fibers, the precisely tuned internal microtopographies induce excellent cell spreading and alignment, which facilitate rapid cell proliferation and differentiation toward mature biofabricated constructs. This strategy can advance the engineering of functional tissues.

Biofabrication of muscle fibers enhanced with plant viral nanoparticles using surface chaotic flows.

Multiple human tissues exhibit fibrous nature. Therefore, the fabrication of hydrogel filaments for tissue engineering is a trending topic. Current tissue models are made of materials that often require further enhancement for appropriate cell attachment, proliferation and differentiation. Here we present a simple strategy, based on the use of surface chaotic flows amenable to mathematical modeling, to fabricate continuous, long and thin filaments of gelatin methacryloyl (GelMA). The fabrication of these filaments is achieved by chaotic advection in a finely controlled and miniaturized version of the journal bearing system. A drop of GelMA pregel is injected on a higher-density viscous fluid (glycerin) and a chaotic flow is applied through an iterative process. The millimeter-scale hydrogel drop is exponentially deformed and elongated to generate a meter-scale fiber, which was then polymerized under UV-light exposure. Computational fluid dynamic (CFD) simulations are conducted to determine the characteristics of the flow and design the experimental conditions for fabrication of the fibers. GelMA fibers were effectively used as scaffolds for C2C12 myoblast cells. Experimental results demonstrate an accurate accordance with CFD simulations for the predicted length of the fibers. Plant-based viral nanoparticles (i.e.Turnip mosaic virus; TuMV) were then integrated to the hydrogel fibers as a secondary nano-scaffold for cells for enhanced muscle tissue engineering. The addition of TuMV significantly increased the metabolic activity of the cell-seeded fibers (p* < 0.05), strengthened cell attachment throughout the first 28 d, improved cell alignment, and promoted the generation of structures that resemble natural mammal muscle tissues. Chaotic two-dimensional-printing is proven to be a viable method for the fabrication of hydrogel fibers. The combined use of thin and long GelMA hydrogel fibers enhanced with flexuous virions offers a promising alternative for scaffolding of muscle cells and show potential to be used as cost-effective models for muscle tissue engineering purposes.

Characterization of a novel automated microfiltration device for the efficient isolation and analysis of circulating tumor cells from clinical blood samples.

The detection and analysis of circulating tumor cells (CTCs) may enable a broad range of cancer-related applications, including the identification of acquired drug resistance during treatments. However, the non-scalable fabrication, prolonged sample processing times, and the lack of automation, associated with most of the technologies developed to isolate these rare cells, have impeded their transition into the clinical practice. This work describes a novel membrane-based microfiltration device comprised of a fully automated sample processing unit and a machine-vision-enabled imaging system that allows the efficient isolation and rapid analysis of CTCs from blood. The device performance was characterized using four prostate cancer cell lines, including PC-3, VCaP, DU-145, and LNCaP, obtaining high assay reproducibility and capture efficiencies greater than 93% after processing 7.5 mL blood samples spiked with 100 cancer cells. Cancer cells remained viable after filtration due to the minimal shear stress exerted over cells during the procedure, while the identification of cancer cells by immunostaining was not affected by the number of non-specific events captured on the membrane. We were also able to identify the androgen receptor (AR) point mutation T878A from 7.5 mL blood samples spiked with 50 LNCaP cells using RT-PCR and Sanger sequencing. Finally, CTCs were detected in 8 out of 8 samples from patients diagnosed with metastatic prostate cancer (mean ± SEM = 21 ± 2.957 CTCs/mL, median = 21 CTCs/mL), demonstrating the potential clinical utility of this device.

High-Throughput Automated Microscopy of Circulating Tumor Cells.

Circulating tumor cells (CTCs) have the potential of becoming the gold standard marker for cancer diagnosis, prognosis and monitoring. However, current methods for its isolation and characterization suffer from equipment variability and human operator error that hinder its widespread use. Here we report the design and construction of a fully automated high-throughput fluorescence microscope that enables the imaging and classification of cancer cells that were labeled by immunostaining procedures. An excellent agreement between our machine vision-based approach and a state-of-the-art microscopy equipment was achieved. Our integral approach provides a path for operator-free and robust analysis of cancer cells as a standard clinical practice.

Emerging Trends in Micro- and Nanoscale Technologies in Medicine: From Basic Discoveries to Translation.

We discuss the state of the art and innovative micro- and nanoscale technologies that are finding niches and opening up new opportunities in medicine, particularly in diagnostic and therapeutic applications. We take the design of point-of-care applications and the capture of circulating tumor cells as illustrative examples of the integration of micro- and nanotechnologies into solutions of diagnostic challenges. We describe several novel nanotechnologies that enable imaging cellular structures and molecular events. In therapeutics, we describe the utilization of micro- and nanotechnologies in applications including drug delivery, tissue engineering, and pharmaceutical development/testing. In addition, we discuss relevant challenges that micro- and nanotechnologies face in achieving cost-effective and widespread clinical implementation as well as forecasted applications of micro- and nanotechnologies in medicine.

Induction of apoptosis in colon cancer cells treated with isorhamnetin glycosides from Opuntia ficus-indica pads.

(OFI) contains health-promoting compounds like flavonoids, being the isorhamnetin glycosides the most abundant. We evaluated the effect of OFI extracts with different isorhamnetin glycosides against two different human colon cancer cells (HT-29 and Caco2). The extracts were obtained by alkaline hydrolysis with NaOH at 40 °C during 15, 30 or 60 min. Tri and diglycosides were the most abundant isorhamnetin glycosides, therefore these compounds were isolated to compare their cytotoxic effect with the obtained from the extracts. The OFI extracts and purified isorhamnetin glycosides were more cytotoxic against HT-29 cells than Caco2 cells. OFI-30 exhibited the lowest IC50 value against HT-29 (4.9 ± 0.5 µg/mL) and against Caco2 (8.2 ± 0.3 µg/mL). Isorhamnetin diglycosides IG5 and IG6 were more cytotoxic than pure isorhamnetin aglycone or triglycosides when they were tested in HT-29 cells. Bioluminescent analysis revealed increased activity of caspase 3/7 in OFI extracts-treated cells, particularly for the extract with the highest concentration of isorhamnetin triglycosides. Flow cytometry analysis confirmed that OFI extract and isorhamnetin glycosides induced a higher percentage of apoptosis in HT-29 than in Caco2, while isorhamnetin was more apoptotic in Caco2. This research demonstrated that glycosilation affected antiproliferative effect of pure isorhamnetin glycosides or when they are mixed with other phytochemicals in an extract obtained from OFI.

A baseline process for the production, recovery, and purification of bacterial influenza vaccine candidates.

The current commercial system for influenza vaccine production depends on the culture of virus in embryonated eggs--a strategy that is both costly and poorly scalable. Consequently, a sudden pandemic event with a demand for millions of vaccine doses in a short time could readily overwhelm the available world production capacity. In this communication, we present a process that uses Escherichia coli for scalable production of recombinant vaccine candidates against influenza. A monomeric and a dimeric fragment of hemagglutinin of the influenza A H1N1/2009 virus were successfully expressed in a BL21 (DE3) pLysS variety of C41 E. coli. We present results from batch processes where induction is made with isopropyl thiogalactoside and from fed-batch experiments where expression is induced using lactose/glucose pulses. Concentrations in the range of 1.188-0.605 g/L of recombinant protein were observed in 2-L stirred tank bioreactors. The genetic construct included an N-terminal histidine tag sequence that facilitated recovery, purification, and proper refolding of the vaccine candidate by affinity chromatography in columns loaded with Ni(+2) . The proteins produced by this strategy selectively and specifically recognizes antibodies from patients diagnosed as positive to influenza A H1N1/2009. Overall protein recovery yields between 30.0 and 34.7% were typically observed. Based on these yields, a production of 4.6 × 10(3) doses L(-3) day(-1) is feasible.

Microplates as a microreactor platform for microalgae research.

High-throughput platforms for microalgae screening are not yet commercially available. In this study, the feasibility of 96-well microplates was analyzed for microalgae research. Equivalence among wells, as culture microreactors, was investigated in controlled high CO2 conditions. Specific growth rates of two microalgae species, Scenedesmus sp. UTEX1589 and an environmental isolate, were significantly higher in border wells than in internal positions. Furthermore, growth rate gradients analyzed as contours throughout the platform were observed for Scenedesmus sp. However, the output variable exhibited high precision associated with a low coefficient of variation (CV), between 6.8 and 7.8%. In a demonstrative experiment to determine the effect of culture media dilution on six microalgae species, treatments were randomized in the central subset of a microplate. Results were consistent and statistically sound (CV 9.4-12.9%), and showed that microalgae species could grow with no detrimental effect in 50% (v/v) dilution of the culture medium. Provided border wells exclusion and a randomized design, 96-well microplates are a practical and statistical robust platform for microalgae research.

A biopharmaceutical plant on a chip: continuous micro-devices for the production of monoclonal antibodies.

We report a proof-of-principle for the use of micro-devices as continuous bioreactors for the production of monoclonal antibodies. We culture CHO cells on the surface of PMMA "zigzag" channels textured with semi-spherical cavities coated with fibronectin, observing steady-state productivities 100 times higher than those observed in full scale systems.

A simple eccentric stirred tank mini-bioreactor: mixing characterization and mammalian cell culture experiments.

In industrial practice, stirred tank bioreactors are the most common mammalian cell culture platform. However, research and screening protocols at the laboratory scale (i.e., 5-100 mL) rely primarily on Petri dishes, culture bottles, or Erlenmeyer flasks. There is a clear need for simple-easy to assemble, easy to use, easy to clean-cell culture mini-bioreactors for lab-scale and/or screening applications. Here, we study the mixing performance and culture adequacy of a 30 mL eccentric stirred tank mini-bioreactor. A detailed mixing characterization of the proposed bioreactor is presented. Laser induced fluorescence (LIF) experiments and computational fluid dynamics (CFD) computations are used to identify the operational conditions required for adequate mixing. Mammalian cell culture experiments were conducted with two different cell models. The specific growth rate and the maximum cell density of Chinese hamster ovary (CHO) cell cultures grown in the mini-bioreactor were comparable to those observed for 6-well culture plates, Erlenmeyer flasks, and 1 L fully instrumented bioreactors. Human hematopoietic stem cells were successfully expanded tenfold in suspension conditions using the eccentric mini-bioreactor system. Our results demonstrate good mixing performance and suggest the practicality and adequacy of the proposed mini-bioreactor.

Clinical and epidemiological features of 2009 pandemic H1N1 influenza differ slightly according to seroprevalence status during the second wave in the general population in México.

BACKGROUND: Clinical features of pandemic H1N1 have been derived from lab-confirmed, hospitalized, or critically ill subjects. This report describes the clinical features of H1N1 and their prevalence from non-confirmed subjects according to seroprevalence status in México. The objective was to determine the prevalence of these clinical features from non-confirmed cases of pandemic H1N1 and to compare them according to seroprevalence status in northern Monterrey, México, during 2009, and to identify the predictive signs and symptoms; there have been no prior serologic studies in México. METHODS: During November-December 2009, 2,222 volunteers, ages 6-99 years, were categorized into 3 symptomatic groups: influenza-like illness, respiratory illness, and non-respiratory illness. Antibodies against influenza A/H1N1/2009 were determined by a virus-free enzyme-linked immunosorbent assay (ELISA) method. Demographics and clinical presentation were assessed through face-to-face questionnaire, and the association with seroprevalence status was determined and compared. RESULTS: Overall seroprevalence was 39%. Of the seropositive subjects, 67% were symptomatic and 33% were asymptomatic. Seventy-one percent of seropositive symptomatic subjects reported respiratory illness, 17% reported non-respiratory symptoms, and 12% reported influenza-like illness. The most common symptoms were rhinorrhea/nasal congestion (93%) and headache (83%). No significant difference was found between the symptom profiles of the seropositive group, compared to the seronegative one, nor of the median duration of symptoms. The seropositive group had a significantly elevated proportion of influenza-like illness (12%), compared to the seronegative group (8%). The proportion of subjects who took days off and who sought medical attention was significantly higher in the seropositive group. No single symptom was associated as a predictor of seropositiveness. CONCLUSIONS: One third of the seropositive subjects were asymptomatic, and few had an influenza-like illness. No difference was found in the symptom profiles of the seropositive and seronegative groups. No single symptom predicted seropositiveness. Large scale population studies are needed, especially in México, to characterize clinical syndromes.

Seroprevalence of antibodies to influenza A/H1N1/2009 among transmission risk groups after the second wave in Mexico, by a virus-free ELISA method.

OBJECTIVE: No serological studies have been performed in Mexico to assess the seroprevalence of influenza A/H1N1/2009 in groups of people according to the potential risk of transmission. The aim of this study was to determine the seroprevalence of antibodies against influenza A/H1N1/2009 in subjects in Mexico grouped by risk of transmission. METHODS: Two thousand two hundred and twenty-two subjects were categorized into one of five occupation groups according to the potential risk of transmission: (1) students, (2) teachers, (3) healthcare workers, (4) institutional home residents aged >60 years, and (5) general population. Seroprevalence by potential transmission group and by age grouped into decades was determined by a virus-free ELISA method based on the recombinant receptor-binding domain of the hemagglutinin of influenza A/H1N1/2009 virus as antigen (85% sensitivity; 95% specificity). The Wilson score, Chi-square test, and logistic regression models were used for the statistical analyses. RESULTS: Seroprevalence for students was 47.3%, for teachers was 33.9%, for older adults was 36.5%, and for the general population was 33.0%, however it was only 24.6% for healthcare workers (p=0.011). Of the students, 56.6% of those at middle school, 56.4% of those at high school, 52.7% of those at elementary school, and 31.1% of college students showed positive antibodies (p<0.001). Seroprevalence was 44.6% for college teachers, 31.6% for middle school teachers, and 29.8% for elementary school teachers, but was only 20.3% for high school teachers (p=0.002). CONCLUSIONS: The student group was the group most affected by influenza A/H1N1/2009, while the healthcare worker group showed the lowest prevalence. Students represent a key target for preventive measures.

An influenza A/H1N1/2009 hemagglutinin vaccine produced in Escherichia coli.

BACKGROUND: The A/H1N1/2009 influenza pandemic made evident the need for faster and higher-yield methods for the production of influenza vaccines. Platforms based on virus culture in mammalian or insect cells are currently under investigation. Alternatively, expression of fragments of the hemagglutinin (HA) protein in prokaryotic systems can potentially be the most efficacious strategy for the manufacture of large quantities of influenza vaccine in a short period of time. Despite experimental evidence on the immunogenic potential of HA protein constructs expressed in bacteria, it is still generally accepted that glycosylation should be a requirement for vaccine efficacy. METHODOLOGY/PRINCIPAL FINDINGS: We expressed the globular HA receptor binding domain, referred to here as HA(63-286)-RBD, of the influenza A/H1N1/2009 virus in Escherichia coli using a simple, robust and scalable process. The recombinant protein was refolded and purified from the insoluble fraction of the cellular lysate as a single species. Recombinant HA(63-286)-RBD appears to be properly folded, as shown by analytical ultracentrifugation and bio-recognition assays. It binds specifically to serum antibodies from influenza A/H1N1/2009 patients and was found to be immunogenic, to be capable of triggering the production of neutralizing antibodies, and to have protective activity in the ferret model. CONCLUSIONS/SIGNIFICANCE: Projections based on our production/purification data indicate that this strategy could yield up to half a billion doses of vaccine per month in a medium-scale pharmaceutical production facility equipped for bacterial culture. Also, our findings demonstrate that glycosylation is not a mandatory requirement for influenza vaccine efficacy.

Specific recognition of influenza A/H1N1/2009 antibodies in human serum: a simple virus-free ELISA method.

BACKGROUND: Although it has been estimated that pandemic Influenza A H1N1/2009 has infected millions of people from April to October 2009, a more precise figure requires a worldwide large-scale diagnosis of the presence of Influenza A/H1N1/2009 antibodies within the population. Assays typically used to estimate antibody titers (hemagglutination inhibition and microneutralization) would require the use of the virus, which would seriously limit broad implementation. METHODOLOGY/PRINCIPAL FINDINGS: An ELISA method to evaluate the presence and relative concentration of specific Influenza A/H1N1/2009 antibodies in human serum samples is presented. The method is based on the use of a histidine-tagged recombinant fragment of the globular region of the hemagglutinin (HA) of the Influenza A H1N1/2009 virus expressed in E. coli. CONCLUSIONS/SIGNIFICANCE: The ELISA method consistently discerns between Inf A H1N1 infected and non-infected subjects, particularly after the third week of infection/exposure. Since it does not require the use of viral particles, it can be easily and quickly implemented in any basic laboratory. In addition, in a scenario of insufficient vaccine availability, the use of this ELISA could be useful to determine if a person has some level of specific antibodies against the virus and presumably at least partial protection.

Mixing of non-Newtonian fluids in steadily forced systems.

We investigate mixing in a viscoelastic and shear-thinning fluid-a very common combination in polymers and suspensions. We find that competition between elastic and viscous forces generates self-similar mixing, lobe transport, and other characteristics of chaos. The mechanism by which chaos is produced is evaluated both in experiments and in a simple model. We find that chaotic flow is generated by spontaneous oscillations, the magnitude and frequency of which govern the extent of chaos and mixing.