Hydrogen-bonded host-guest systems are stable in ionic liquids.

We show that H-bonded host-guest systems associate in ionic liquids (ILs), pure salts with melting point below room temperature, in which dipole-dipole electrostatic interactions should be negligible in comparison with dipole-charge interactions. Binding constants (Ka) obtained from titrations of four H-bonded host-guest systems in two organic solvents and two ionic liquids yield smaller yet comparable Ka values in ionic liquids than in organic solvents. We also detect the association event using force spectroscopy, which confirms that the binding is not solely due to (de)solvation processes. Our results indicate that classic H-bonded host-guest supramolecular chemistry takes place in ILs. This implies that strong H-bonds are only moderately affected by surroundings composed entirely of charges, which can be interpreted as an indication that the balance of Coulombic to covalent forces in strong H-bonds is not tipped towards the former.

Nanocellulose-Based Hybrid Materials for UV Blocking and Mechanically Robust Barriers.

Nanocellulose (NC)-based hybrid coatings and films containing CeO2 and SiO2 nanoparticles (NPs) to impart UV screening and hardness properties, respectively, were prepared by solvent casting. The NC film-forming component (75 wt % of the overall solids) was composed entirely of cellulose nanocrystals (CNCs) or of CNCs combined with cellulose nanofibrils (CNFs). Zeta potential measurements indicated that the four NP types (CNC, CNF, CeO2, and SiO2) were stably dispersed in water and negatively charged at pH values between 6 and 9. The combination of NPs within this pH range ensured uniform formulations and homogeneous coatings and films, which blocked UV light, the extent of which depended on film thickness and CeO2 NP content, while maintaining good transparency in the visible spectrum (∼80%). The addition of a low amount of CNFs (1%) reduced the film hardness, but this effect was compensated by the addition of SiO2 NPs. Chiral nematic self-assembly was observed in the mixed NC film; however, this ordering was disrupted by the addition of the oxide NPs. The roughness of the hybrid coatings was reduced by the inclusion of oxide NPs into the NC matrix perhaps because the spherical oxide NPs were able to pack into the spaces between cellulose fibrils. We envision these hybrid coatings and films in barrier applications, photovoltaics, cosmetic formulations, such as sunscreens, and for the care and maintenance of wood and glass surfaces, or other surfaces that require a smooth, hard, and transparent finish and protection from UV damage.

Solventless synthesis of cerium oxide nanoparticles and their application in UV protective clear coatings.

Colloidal dispersions of cerium oxide nanoparticles are of importance for numerous applications including as catalysts, chemical mechanical polishing agents and additives for UV protective and anticorrosion coatings. Here, concentrated oleate-coated cerium oxide nanoparticles (CeO2 NPs) with a uniform size have been produced by solventless thermolysis of cerium-oleate powder under low pressure at 320 °C and subsequently dispersed in hexane. Unlike any previously reported colloidal synthesis process for ceria nanoparticles, this process does not involve any toxic high boiling point organic solvent that requires subsequent removal at high cost. Although the process is very simple, highly concentrated cerium oxide nanoparticles with more than 17 wt% solid content and 70% of the theoretical yield can be easily obtained. Moreover, the size, shape and crystallinity of cerium oxide nanoparticles can be tailored by changing the thermal decomposition temperature and reaction time. Moreover, the new synthesis route developed in this study allows the synthesis of clean and dispersible ceria nanoparticles at a relatively low cost in a single step. The prepared ceria nanoparticles have an excellent UV absorption property and remain transparent to visible light, thus having the potential to replace potentially hazardous organic compounds in UV absorbing clear coatings. As a proof of concept, the prepared dispersions of cerium oxide nanoparticles in hexane were formulated into a solvent borne binder base to develop clear UV protecting coatings for light sensitive substrates. The general synthesis strategy presented in this study is generally applicable for the low-cost production of a concentrated dispersion of metal oxide nanoparticles with minimal environmental impact.

Disruption of Higher Order DNA Structures in Friedreich's Ataxia (GAA)n Repeats by PNA or LNA Targeting.

Expansion of (GAA)n repeats in the first intron of the Frataxin gene is associated with reduced mRNA and protein levels and the development of Friedreich's ataxia. (GAA)n expansions form non-canonical structures, including intramolecular triplex (H-DNA), and R-loops and are associated with epigenetic modifications. With the aim of interfering with higher order H-DNA (like) DNA structures within pathological (GAA)n expansions, we examined sequence-specific interaction of peptide nucleic acid (PNA) with (GAA)n repeats of different lengths (short: n=9, medium: n=75 or long: n=115) by chemical probing of triple helical and single stranded regions. We found that a triplex structure (H-DNA) forms at GAA repeats of different lengths; however, single stranded regions were not detected within the medium size pathological repeat, suggesting the presence of a more complex structure. Furthermore, (GAA)4-PNA binding of the repeat abolished all detectable triplex DNA structures, whereas (CTT)5-PNA did not. We present evidence that (GAA)4-PNA can invade the DNA at the repeat region by binding the DNA CTT strand, thereby preventing non-canonical-DNA formation, and that triplex invasion complexes by (CTT)5-PNA form at the GAA repeats. Locked nucleic acid (LNA) oligonucleotides also inhibited triplex formation at GAA repeat expansions, and atomic force microscopy analysis showed significant relaxation of plasmid morphology in the presence of GAA-LNA. Thus, by inhibiting disease related higher order DNA structures in the Frataxin gene, such PNA and LNA oligomers may have potential for discovery of drugs aiming at recovering Frataxin expression.

Electrostatic Swelling Transitions in Surface-Bound Microgels.

Herein, electrostatic swelling transitions of poly(ethyl acrylate-co-methacrylic acid) microgels covalently bound to silica surfaces are investigated. Confined at a solid surface, microgel swelling is anisotropically hindered and the structure is flattened to an extent dictated by pH and microgel composition. Microgel deformation under applied load is also shown to depend on microgel charge density, with the highest deformation observed at intermediate charge densities. Two modes of microgel deformation under load were observed, one elastic and one viscoelastic, related to polymer strand deformation and displacement of trapped water, respectively. Results on polymer strand dynamics reveal that the microgels are highly dynamic, as the number of strand-tip interaction points increases 4-fold during a 10 s contact time. Furthermore, finite element modeling captures these effects qualitatively and shows that stress propagation in the microgel network decays locally at the rim of contact with a solid interface or close to the tip probe. Taken together, the results demonstrate a delicate interplay between the surface and microgel which determines the structure and nanomechanical properties of the latter and needs to be controlled in applications of systems such as pH-responsive surface coatings in biomaterials.

Factors Affecting Peptide Interactions with Surface-Bound Microgels.

Effects of electrostatics and peptide size on peptide interactions with surface-bound microgels were investigated with ellipsometry, confocal microscopy, and atomic force microscopy (AFM). Results show that binding of cationic poly-L-lysine (pLys) to anionic, covalently immobilized, poly(ethyl acrylate-co-methacrylic acid) microgels increased with increasing peptide net charge and microgel charge density. Furthermore, peptide release was facilitated by decreasing either microgel or peptide charge density. Analogously, increasing ionic strength facilitated peptide release for short peptides. As a result of peptide binding, the surface-bound microgels displayed pronounced deswelling and increased mechanical rigidity, the latter quantified by quantitative nanomechanical mapping. While short pLys was found to penetrate the entire microgel network and to result in almost complete charge neutralization, larger peptides were partially excluded from the microgel network, forming an outer peptide layer on the microgels. As a result of this difference, microgel flattening was more influenced by the lower Mw peptide than the higher. Peptide-induced deswelling was found to be lower for higher Mw pLys, the latter effect not observed for the corresponding microgels in the dispersed state. While the effects of electrostatics on peptide loading and release were similar to those observed for dispersed microgels, there were thus considerable effects of the underlying surface on peptide-induced microgel deswelling, which need to be considered in the design of surface-bound microgels as carriers of peptide loads, for example, in drug delivery or in functionalized biomaterials.

Nanomechanical properties of human skin and introduction of a novel hair indenter.

The mechanical resistance of the stratum corneum, the outermost layer of skin, to deformation has been evaluated at different length scales using Atomic Force Microscopy. Nanomechanical surface mapping was first conducted using a sharp silicon tip and revealed that Young׳s modulus of the stratum corneum varied over the surface with a mean value of about 0.4GPa. Force indentation measurements showed permanent deformation of the skin surface only at high applied loads (above 4µN). The latter effect was further demonstrated using nanomechanical imaging in which the obtained depth profiles clearly illustrate the effects of increased normal force on the elastic/plastic surface deformation. Force measurements utilizing the single hair fiber probe supported the nanoindentation results of the stratum corneum being highly elastic at the nanoscale, but revealed that the lateral scale of the deformation determines the effective elastic modulus.This result resolves the fact that the reported values in the literature vary greatly and will help to understand the biophysics of the interaction of razor cut hairs that curl back during growth and interact with the skin.

Monolayer study by VSFS: in situ response to compression and shear in a contact.

Self-assembled octadecyltrichlorosilane ((OTS), CH3(CH2)17SiCl3) layers on hydroxyl-terminated silicon oxide (SiO2) were prepared. The monolayers were characterized with atomic force microscopy (AFM) and contact angle measurements; their conformation was studied before, during, and after contact with a polymer (either PDMS or PTFE) surface using the vibrational sum frequency spectroscopy (VSFS) technique. During contact, the effect of pressure was studied for both polymer surfaces, but in the case of PTFE, the effect of shear rate on the contact was simultaneously studied. The VSFS response of the monolayers with pressure was almost entirely due to changes in the real area of contact with the polymer and therefore the Fresnel factors, whereas sliding caused disorder in the previously all-trans monolayer, as evidenced by a significant increase in the population of gauche defects.