Semi-continuous hydrothermal processing of pine sawdust for integrated production of fuels precursors and platform chemicals.

This research reports data for the integrated obtaining of fermentable sugars (FSs), bio-oil (BO), and hydro-char (HC) - all fuel precursors - as well as platform chemicals (PCs - acetic, formic, and levulinic acid, besides furfural, and hydroxymethylfurfural) through semi-continuous hydrothermal processing of sawdust from pine wood. The influence of temperature (260, 300, and 340 °C) and the water-to-biomass ratio (25 and 50 g H2O (g biomass)-1) were the parameters considered to evaluate the mass yields, kinetic profiles, and BO properties. For FSs (and PCs), a detailed analysis considering the kinetic profiles of obtaining cellobiose, glucose, xylose, and arabinose is presented. For the conditions evaluated, a distinct behavior concerning the process parameters was observed, where 7.11 and 9.28 g (100 g biomass)-1 of FSs and PCs were synergistically obtained, respectively, after 30 min, 20 MPa, 260 °C, and 50 g H2O (g biomass)-1. Contextually, 17.59 g (100 g biomass)-1 of BO was obtained at 340 °C and the same water/biomass ratio. FTIR analysis of the BO samples suggested the presence of aldehydes, carboxylic acids, ketones, hydrocarbons, ethers as well as aromatic, alcohols, and nitrogenous compounds. Similar HC yields were achieved among the conditions analyzed, where 24.68 g (100 g biomass)-1 were obtained at 340 °C and 50 g H2O (g biomass)-1 for a higher heating value of 29.14 MJ kg-1 (1.5 times higher than the in natura biomass).

Sequential Process of Subcritical Water Hydrolysis and Hydrothermal Liquefaction of Butia Capitata Endocarp to Obtain Fermentable Sugars, Platform Chemicals, Bio-oil, and Biochar.

Butia capitata endocarp (BCE) is a biomass residue with the potential to produce a wide variety of bio-products. The processing of BCE in a sequential process of subcritical water hydrolysis (SWH) and hydrothermal liquefaction (HTL) was investigated to obtain fermentable sugars, platform chemicals, bio-oil, and biochar. The SWH was evaluated at 230 and 260 °C and solvent: feed mass ratios (R) of 10 and 20 for the production of fermentable sugars and platform chemicals. The solid residue from SWH was sequentially submitted to the HTL at 330 and 360 °C for bio-oil and biochar production. The results were analyzed by comparing the sequential (SWH/HTL) and individual (HTL only) processes. The highest yields of fermentable sugars (5.26 g/ 100 g BCE) were obtained for SWH at 260 °C and R-20 with higher contents of xylose (2.64 g/100 g BCE) and cellobiose (1.75 g/100 g BCE). The highest yields of platform chemicals (2.44 g/100 g BCE) were obtained for SWH at 260 °C and R-10 with higher contents of acetic acid (1.78 g/100 g BCE) and furfural (0.54 g/100 g BCE). The highest yield of bio-oil (25.30 g/100 g BCE) occurred in HTL individual process at 360 °C and R-20. Sequential process SWH/HTL showed a decrease in bio-oil yield but maintained a similar biochar yield compared to HTL, in addition to the production of fermentable sugars and platform chemicals.

Adsorption of basic fuchsin using soybean straw hydrolyzed by subcritical water.

The valorization of agro-industrial residues can be improved through their full use, making the production of second-generation ethanol viable. In this scenario, hydrolyzed soybean straw generated from a subcritical water process was applied to the basic fuchsin adsorption. At pH eight, a high adsorption capacity was obtained. The mass test results showed that basic fuchsin's removal and adsorption capacity could be maximized with an adsorbent dosage of 0.9 g L-1. The linear driving force model was suitable for predicting the kinetic profile, and the kinetic curves showed that equilibrium was reached with only 30 min of contact time. Besides, the Langmuir model was the best to predict the adsorption isotherms. The thermodynamic parameters revealed a spontaneous and endothermic process. At 328 K, there is maximum adsorption capacity (72.9 mg g-1). Therefore, it can be stated that this material could be competitive in terms of adsorption capacity coupled with the idea of full use of waste.

Defatted rice bran pretreated with deep eutectic solvents and sequential use as feedstock for subcritical water hydrolysis.

Deffated rice bran has potential to processing into ethanol due to its lignocellulosic composition and agricultural productivity. The composition of the pretreated deffated rice bran with Deep Eutectic Solvent was investigated aiming the production of sugars and bioproducts using subcritical water hydrolysis. Changes in the deffated rice bran composition at different pretreatment times and mixtures of deep eutectic solvent were evaluated by the derivative of thermogravimetric analysis. The pretreated deffated rice bran presented an enrichment in the content of hemicelluloses (281.0%) and delignification (59.3 %). Under the same condition of subcritical water hydrolysis (230 °C/R-100) the yield of fermentable sugars increased 2.20 times in the same study time interval (20 min) when comparing pretreated and untreated deffated rice bran.

Hydrothermal carbonization and Liquefaction: differences, progress, challenges, and opportunities.

Thermochemical processes including hydrothermal technology are gaining research interest as a potentially green method for deconstructing biomass into platform chemicals or energy carriers. Hydrothermal liquefaction (HTL) and Hydrothermal Carbonization (HTC) are advantageous because of their enhanced process performance while being environmentally friendly and technologically innovative. However, after a deep review, several works have shown a misunderstanding between HTL and HTC concepts. Therefore, this review advances understanding on the main differences and gaps found between HTL and HTC in terms of operation parameters, technical issues, and main products. Furthermore, environmental and techno-economic assessments (TEA) were presented to appraise the environmental sustainability and economic implications of these techniques. Perspectives and challenges are presented and the integration approaches of hydrothermal valorization pathways and biorefining are explored.

Adsorption of 2-nitrophenol using rice straw and rice husks hydrolyzed by subcritical water.

The potential of rice husks and straw as adsorbents after being processed by subcritical water hydrolysis (SWH) was investigated. The influences of temperature (453, 493 and 533 K) and liquid/solid ratio (7.5 and 15 g water/g biomass) on the rice straw and rice husks characteristics and on the adsorption capacity of 2-nitrophenol were evaluated at pH 4 and 7. Adsorption kinetics, equilibrium and thermodynamic parameters were also studied. The adsorption capacity was favored at pH 7. Pseudo-first-order model was suitable to predict the kinetic curves for 2-nitrophenol concentrations of 25, 50, 75 and 100 mg/L and the isotherm data obeyed the Freundlich model. Overall, the thermodynamic results revealed a spontaneous and exothermic process. The maximum adsorption capacity (92.97 ±â€¯1.31 mg/g) was obtained for rice straw that has undergone an SWH at 453 K and 7.5 g water/g straw. The integration of processes to valorize co-products can make the production of cellulosic bioethanol more feasible.

Obtaining fermentable sugars and bioproducts from rice husks by subcritical water hydrolysis in a semi-continuous mode.

This work aimed at producing fermentable sugars and bioproducts from rice husks by subcritical water hydrolysis at 25 MPa in a semi-continuous mode. The influences of temperature (180 °C; 220 °C; 260 °C) and liquid/solid ratio (7.5 g water/g husks; 15 g water/g husks) on reducing sugar yield (YRS), efficiency (E), kinetic profiles (0-15 min), composition of sugars, inhibitors and organic acids, and physicochemical characteristics of the remaining solid material were evaluated and discussed in the work. The highest YRS (18.0 ±â€¯2.9 g/100 g husks) and E (39.5 ±â€¯1.7 g sugars/100 g carbohydrates) were obtained at 220 °C and 7.5 gwater/g husks. In such condition, the hydrolyzed solutions presented cellobiose (18.0 g/L), xylose 17.7 g/L), arabinose (3.6 g/L), glucose (1.5 g/L), and levulinic acid (0.7 g/L). The fermentable sugars and bioproducts can be applied in several industrial fields, especially for the production of bioethanol and other higher value-added chemical compounds.