Biodegradation of aliphatic polyurethane foams in soil: Influence of amide linkages and supramolecular structure.

Polyurethane (PU) foams are classified as physically nonrecyclable thermosets. The current effort of sustainable and eco-friendly production makes it essential to explore methods of better waste management, for instance by modifying the structure of these frequently used polymers to enhance their microbial degradability. The presence of ester links is known to be a crucial prerequisite for the biodegradability of PU foams. However, the impact of other hydrolysable groups (urethane, urea and amide) occurred in PU materials, as well as the supramolecular structure of the PU network and the cellular morphology of PU foams, is still relatively unexplored. In this work, fully aliphatic PU foams with and without hydrolyzable amide linkages were prepared and their aerobic biodegradation was investigated using a six-month soil burial test. Besides the variable chemical composition of the PU foams, the influence of their different supramolecular arrangement and cellular morphologies on the extent of biodegradation was also evaluated. Throughout the soil burial test, the release of carbon dioxide, and enzyme activities of proteases, esterases, and ureases were measured. At the same time, phospho-lipid fatty acids (PLFA) analysis was conducted together with an assessment of microbial community composition achieved by analysing the genetic information from the 16S rRNA gene and ITS2 region sequencing. The results revealed a mineralization rate of 30-50 % for the PU foams, indicating a significant level of degradation as well as indicating that PU foams can be utilized by soil microorganisms as a source of both energy and nutrients. Importantly, microbial biomass remained unaffected, suggesting that there was no toxicity associated with the degradation products of the PU foams. It was further confirmed that ester linkages in PU foam structure were easily enzymatically cleavable, while amide linkages were not prone to degradation by soil microorganisms. In addition, it was shown that the presence of amide linkages in PU foam leads to a change in the supramolecular network arrangement due to increased content of hard segments, which in turn reduces the biodegradability of PU foam. These findings show that it is important to consider both chemical composition and supramolecular/macroscopic structure when designing new PU materials in an effort to develop environmentally friendly alternatives.

Natural Rubber Composites Using Hydrothermally Carbonized Hardwood Waste Biomass as a Partial Reinforcing Filler- Part I: Structure, Morphology, and Rheological Effects during Vulcanization.

A new generation biomass-based filler for natural rubber, 'hydrochar' (HC), was obtained by hydrothermal carbonization of hardwood waste (sawdust). It was intended as a potential partial replacement for the traditional carbon black (CB) filler. The HC particles were found (TEM) to be much larger (and less regular) than CB: 0.5-3 µm vs. 30-60 nm, but the specific surface areas were relatively close to each other (HC: 21.4 m2/g vs. CB: 77.8 m2/g), indicating a considerable porosity of HC. The carbon content of HC was 71%, up from 46% in sawdust feed. FTIR and 13C-NMR analyses indicated that HC preserved its organic character, but it strongly differs from both lignin and cellulose. Experimental rubber nanocomposites were prepared, in which the content of the combined fillers was set at 50 phr (31 wt.%), while the HC/CB ratios were varied between 40/10 and 0/50. Morphology investigations proved a fairly even distribution of HC and CB, as well as the disappearance of bubbles after vulcanization. Vulcanization rheology tests demonstrated that the HC filler does not hinder the process, but it significantly influences vulcanization chemistry, canceling scorch time on one hand and slowing down the reaction on the other. Generally, the results suggest that rubber composites in which 10-20 phr of CB are replaced by HC might be promising materials. The use of HC in the rubber industry would represent a high-tonnage application for hardwood waste.

Reconstructing Reliable Powder Patterns from Spikelets (Q)CPMG NMR Spectra: Simplification of UWNMR Crystallography Analysis.

Spikelets NMR spectra are very popular as they enable the shortening of experimental time and give the possibility to obtain required NMR parameters for nuclei with ultrawide NMR patterns. Unfortunately, these resulted ssNMR spectra cannot be fitted directly in common software. For this reason, we developed UWNMRSpectralShape (USS) software which transforms spikelets NMR patterns into single continuous lines. Subsequently, these reconstructed spectral envelopes of the (Q)CPMG spikelets patterns can be loaded into common NMR software and automatically fitted, independently of experimental settings. This allows the quadrupole and chemical shift parameters to be accurately determined. Moreover, it makes fitting of spikelets NMR spectra exact, fast and straightforward.

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters.

Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.

Copolymer chain formation of 2-oxazolines by in situ 1H-NMR spectroscopy: dependence of sequential composition on substituent structure and monomer ratios.

In situ 1H NMR characterization of copolymerization reactions of various 2-oxazoline monomers at different molar ratios offers detailed insight into the build-up and composition of the polymer chains. Various 2-oxazolines were copolymerized in one single solvent, butyronitrile, with 2-dec-9'-enyl-2-oxazoline, where the double bond allows for post-polymerization modification and can function as a crosslinking unit to form polymer networks. The types of the monomers and their molar ratios in the feed have a strong effect on the microstructure of the forming copolymer chains. Copolymers comprising 2-dec-9'-enyl-2-oxazoline and either 2-ethyl-, 2-isopropyl-, 2-butyl-, 2-heptyl, 2-nonyl- or 2-phenyl-2-oxazoline, show significant differences in sequential structure of copolymers ranging from block to gradient and random ordering of the monomer units. 1H NMR was found to be a powerful tool to uncover detailed oxazoline copolymerization kinetics and evolution of chain composition.

Magnetizing lead-free halide double perovskites.

Spintronics holds great potential for next-generation high-speed and low-power consumption information technology. Recently, lead halide perovskites (LHPs), which have gained great success in optoelectronics, also show interesting magnetic properties. However, the spin-related properties in LHPs originate from the spin-orbit coupling of Pb, limiting further development of these materials in spintronics. Here, we demonstrate a new generation of halide perovskites, by alloying magnetic elements into optoelectronic double perovskites, which provide rich chemical and structural diversities to host different magnetic elements. In our iron-alloyed double perovskite, Cs2Ag(Bi:Fe)Br6, Fe3+ replaces Bi3+ and forms FeBr6 clusters that homogenously distribute throughout the double perovskite crystals. We observe a strong temperature-dependent magnetic response at temperatures below 30 K, which is tentatively attributed to a weak ferromagnetic or antiferromagnetic response from localized regions. We anticipate that this work will stimulate future efforts in exploring this simple yet efficient approach to develop new spintronic materials based on lead-free double perovskites.

Gallium Species Incorporated into MOF Structure: Insight into the Formation of a 3D Polycrystalline Gallium-Imidazole Framework.

The formation of a polycrystalline 3D gallium-imidazole framework (MOF) was closely studied in three steps using ssNMR, XRPD, and TGA. In all steps, the reaction products show relatively high temperature stability up to 500 °C. The final product was examined by structural analysis using NMR crystallography combined with TG and BET analyses, which enabled a detailed characterization of the polycrystalline MOF system on the atomic-resolution level. 71Ga ssNMR spectra provided valuable structural information on the coexistence of several distinct gallium species, including a tunable liquid phase. Moreover, using an NMR crystallography approach, two structurally asymmetric units of Ga(Im6)6- incorporated into the thermally stable polycrystalline 3D matrix were identified. Prepared polycrystalline MOF material with polymorphic gallium species is promising for use in catalytic processes.

Effect of PAMAM Dendrimers on Interactions and Transport of LiTFSI and NaTFSI in Propylene Carbonate-Based Electrolytes.

Poly(amidoamine) (PAMAM)-based electrolytes are prepared by dissolving the PAMAM half-generations G1.5 or G2.5 in propylene carbonate (PC), either with lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) or sodium bis(trifluoromethylsulfonyl)imide (NaTFSI) salts. The solutions, designed for ion battery applications, are studied in terms of ions transport properties. Raman Spectroscopy reveals information about the interactions between cations and PAMAM dendrimers as well as full dissociation of the salts in all solutions. Pulsed-field gradient Nuclear Magnetic Resonance (PFG NMR), measured as a function of both temperature and PAMAM concentration, are obtained for the cation, anion, solvent, and dendrimer molecules using lithium (7Li), sodium (23Na), fluorine (19F), and hydrogen (1H) NMR, respectively. It was found that lithium diffusion is slow compared to the larger TFSI anion and decreases with PAMAM concentration due to interactions between cation and dendrimer. Comparison of conductivities calculated from diffusion coefficients using the Nernst-Einstein equation, with conductivity measurements obtained from Impedance Spectroscopy (IS), shows slightly higher IS conductivities, caused among others by PAMAM conductivity.

Perovskite-molecule composite thin films for efficient and stable light-emitting diodes.

Although perovskite light-emitting diodes (PeLEDs) have recently experienced significant progress, there are only scattered reports of PeLEDs with both high efficiency and long operational stability, calling for additional strategies to address this challenge. Here, we develop perovskite-molecule composite thin films for efficient and stable PeLEDs. The perovskite-molecule composite thin films consist of in-situ formed high-quality perovskite nanocrystals embedded in the electron-transport molecular matrix, which controls nucleation process of perovskites, leading to PeLEDs with a peak external quantum efficiency of 17.3% and half-lifetime of approximately 100 h. In addition, we find that the device degradation mechanism at high driving voltages is different from that at low driving voltages. This work provides an effective strategy and deep understanding for achieving efficient and stable PeLEDs from both material and device perspectives.

The atomic-level structure of bandgap engineered double perovskite alloys Cs2AgIn1-x Fe x Cl6.

Although lead-free halide double perovskites are considered as promising alternatives to lead halide perovskites for optoelectronic applications, state-of-the-art double perovskites are limited by their large bandgap. The doping/alloying strategy, key to bandgap engineering in traditional semiconductors, has also been employed to tune the bandgap of halide double perovskites. However, this strategy has yet to generate new double perovskites with suitable bandgaps for practical applications, partially due to the lack of fundamental understanding of how the doping/alloying affects the atomic-level structure. Here, we take the benchmark double perovskite Cs2AgInCl6 as an example to reveal the atomic-level structure of double perovskite alloys (DPAs) Cs2AgIn1-x Fe x Cl6 (x = 0-1) by employing solid-state nuclear magnetic resonance (ssNMR). The presence of paramagnetic alloying ions (e.g. Fe3+ in this case) in double perovskites makes it possible to investigate the nuclear relaxation times, providing a straightforward approach to understand the distribution of paramagnetic alloying ions. Our results indicate that paramagnetic Fe3+ replaces diamagnetic In3+ in the Cs2AgInCl6 lattice with the formation of [FeCl6]3-·[AgCl6]5- domains, which show different sizes and distribution modes in different alloying ratios. This work provides new insights into the atomic-level structure of bandgap engineered DPAs, which is of critical significance in developing efficient optoelectronic/spintronic devices.

Ionic Liquids as Delaminating Agents of Layered Double Hydroxide during In-Situ Synthesis of Poly (Butylene Adipate-co-Terephthalate) Nanocomposites.

Currently, highly demanded biodegradable or bio-sourced plastics exhibit inherent drawbacks due to their limited processability and end-use properties (barrier, mechanical, etc.). To overcome all of these shortcomings, the incorporation of lamellar inorganic particles, such as layered double hydroxides (LDH) seems to be appropriate. However, LDH delamination and homogenous dispersion in a polymer matrix without use of harmful solvents, remains a challenging issue, which explains why LDH-based polymer nanocomposites have not been scaled-up yet. In this work, LDH with intercalated ionic liquid (IL) anions were synthesized by a direct co-precipitation method in the presence of phosphonium IL and subsequently used as functional nanofillers for in-situ preparation of poly (butylene adipate-co-terephthalate) (PBAT) nanocomposites. The intercalated IL-anions promoted LDH swelling in monomers and LDH delamination during the course of in-situ polycondensation, which led to the production of PBAT/LDH nanocomposites with intercalated and exfoliated morphology containing well-dispersed LDH nanoplatelets. The prepared nanocomposite films showed improved water vapor permeability and mechanical properties and slightly increased crystallization degree and therefore can be considered excellent candidates for food packaging applications.

The Nature of Chemical Bonding in Lewis Adducts as Reflected by 27Al NMR Quadrupolar Coupling Constant: Combined Solid-State NMR and Quantum Chemical Approach.

Lewis acids and Lewis adducts are widely used in the chemical industry because of their high catalytic activity. Their precise geometrical description and understanding of their electronic structure are a crucial step for targeted synthesis and specific use. Herein, we present an experimental/computational strategy based on a solid-state NMR crystallographic approach allowing for detailed structural characterization of a wide range of organoaluminum compounds considerably differing in their chemical constitution. In particular, we focus on the precise measurement and subsequent quantum-chemical analysis of many different 27Al NMR resonances in the extremely broad range of quadrupolar coupling constants from 1 to 50 MHz. In this regard, we have optimized an experimental strategy combining a range of static as well as magic angle spinning experiments allowing reliable detection of the entire set of aluminum sites present in trimesitylaluminum (AlMes3) reaction products. In this way, we have spectroscopically resolved six different products in the resulting polycrystalline mixture. All 27Al NMR resonances are precisely recorded and comprehensively analyzed by a quantum-chemical approach. Interestingly, in some cases the recorded 27Al solid-state NMR spectra show unexpected quadrupolar coupling constant values reaching up to ca. 30 MHz, which are attributed to tetra-coordinated aluminum species (Lewis adducts with trigonal pyramidal geometry). The cause of this unusual behavior is explored by analyzing the natural bond orbitals and complexation energies. The linear correlation between the quadrupolar coupling constant value and the nature of bonds in the Lewis adducts is revealed. Moreover, the 27Al NMR data are shown to be sensitive to the geometry of the tetra-coordinated organoaluminum species. Our findings thus provide a viable approach for the direct identification of Lewis acids and Lewis adducts, not only in the investigated multicomponent organoaluminum compounds but also in inorganic zeolites featuring catalytically active trigonal (AlIII) and strongly perturbed AlIV sites.

Unexpected Crystallization Patterns of Zinc Boron Imidazolate Framework ZBIF-1: NMR Crystallography of Integrated Metal-Organic Frameworks.

Framework materials, that is, metal-organic frameworks (MOFs) and inorganic frameworks (zeolites), are porous systems with regular structures that provide valuable properties suitable for sorption, catalysis, molecular sieving, and so on. Herein, an efficient, experimental/computational strategy is presented that allows detailed characterization of a polycrystalline MOF system, namely, zinc boron imidazolate framework ZBIF-1, with two integrated unit cells on the atomic-resolution level. Although high-resolution 1 H, 11 B, 13 C, and 15 N MAS NMR spectra provide valuable structural information on the coexistence of two distinct asymmetric units in the investigated system, an NMR crystallography approach combining X-ray powder diffraction, solid-state NMR spectroscopy, and DFT calculations allowed the exact structure of the secondary crystalline phase to be firmly defined and, furthermore, the mutual interconnectivity of the two crystalline frameworks to be resolved. Thus, this study shows the versatility and efficiency of solid-state NMR crystallography for the investigation of the wide family of MOF materials with their extensive structural complexity.

Structure and Dynamics of Alginate Gels Cross-Linked by Polyvalent Ions Probed via Solid State NMR Spectroscopy.

Alginate gels are an outstanding biomaterial widely applicable in tissue engineering, medicine, and pharmacy for cell transplantation, wound healing and efficient bioactive agent delivery, respectively. This contribution provides new and comprehensive insight into the atomic-resolution structure and dynamics of polyvalent ion-cross-linked alginate gels in microbead formulations. By applying various advanced solid-state NMR (ssNMR) spectroscopy techniques, we verified the homogeneous distribution of the cross-linking ions in the alginate gels and the high degree of ion exchange. We also established that the two-component character of the alginate gels arises from the concentration fluctuations of residual water molecules that are preferentially localized along polymer chains containing abundant mannuronic acid (M) residues. These hydrated M-rich blocks tend to self-aggregate into subnanometer domains. The resulting coexistence of two types of alginate chains differing in segmental dynamics was revealed by 1H-13C dipolar profile analysis, which indicated that the average fluctuation angles of the stiff and mobile alginate segments were about 5-9° or 30°, respectively. Next, the 13C CP/MAS NMR spectra indicated that the alginate polymer microstructure was strongly dependent on the type of cross-linking ion. The polymer chain regularity was determined to systematically decrease as the cross-linking ion radius decreased. Consistent with the 1H-1H correlation spectra, regular structures were found for the gels cross-linked by relatively large alkaline earth cations (Ba2+, Sr2+, or Ca2+), whereas the alginate chains cross-linked by bivalent transition metal ions (Zn2+) and trivalent metal cations (Al3+) exhibited significant irregularities. Notably, however, the observed disordering of the alginate chains was exclusively attributed to the M residues, whereas the structurally well-defined gels all contained guluronic acid (G) residues. Therefore, a key role of the units in M-rich blocks as mediators promoting the self-assembly of alginate chains was experimentally confirmed. Finally, combining 2D 27Al 3Q/MAS NMR spectroscopy with density functional theory (DFT) calculations provided previously unreported insight into the structure of the Al3+ cross-linking centers. Notably, even with a low residual amount of water, these cross-linking units adopt exclusively 6-fold octahedral coordination and exhibit significant motion, which considerably reduces quadrupolar coupling constants. Thus, the experimental strategy presented in this study provides a new perspective on cross-linked alginate structure and dynamics for which high-quality diffraction data at the atomic resolution level are inherently unavailable.