Competitive adsorption of Cu (II), Co (II) and Ni (II) from their binary and tertiary aqueous solutions using chitosan-coated perlite beads as biosorbent.

A new composite chitosan-coated biosorbent was prepared and was used for the removal and recovery of heavy metals from aqueous solution. In the present investigation, equilibrium adsorption characteristics of Cu (II), Ni (II), and Co (II) from their binary and tertiary solution on newly developed biosorbent chitosan-coated perlite beads were evaluated through batch and column studies. These beads were characterized by using FTIR, EDXRF and surface area analysis techniques. The effect of various biosorption parameters like effect of pH, agitation time, concentration of adsorbate and amount of adsorbent on extent of adsorption was investigated. The adsorption follows Lagergren first order kinetic model. The equilibrium adsorption data were fitted to Freundlich and Langmuir adsorption isotherm models and the model parameters were evaluated. Both the models represent the experimental data satisfactorily. The sorbent loaded with metal was regenerated with 0.1N NaOH solution. Furthermore the column dynamic studies indicate the re-usage of the biosorbent.

Adsorptive removal of copper and nickel ions from water using chitosan coated PVC beads.

A new biosorbent was developed by coating chitosan, a naturally and abundantly available biopolymer, on to polyvinyl chloride (PVC) beads. The biosorbent was characterized by FTIR spectra, porosity and surface area analyses. Equilibrium and column flow adsorption characteristics of copper(II) and nickel(II) ions on the biosorbent were studied. The effect of pH, agitation time, concentration of adsorbate and amount of adsorbent on the extent of adsorption was investigated. The experimental data were fitted to Langmuir and Freundlich adsorption isotherms. The data were analyzed on the basis of Lagergren pseudo first order, pseudo-second order and Weber-Morris intraparticle diffusion models. The maximum monolayer adsorption capacity of chitosan coated PVC sorbent as obtained from Langmuir adsorption isotherm was found to be 87.9 mg g(-1) for Cu(II) and 120.5 mg g(-1) for Ni(II) ions, respectively. In addition, breakthrough curves were obtained from column flow experiments. The experimental results demonstrated that chitosan coated PVC beads could be used for the removal of Cu(II) and Ni(II) ions from aqueous medium through adsorption.

Biosorption of phenol and o-chlorophenol from aqueous solutions on to chitosan-calcium alginate blended beads.

Beads of chitosan-sodium alginate are prepared from naturally occurring biopolymers, chitosan (a cationic polysaccharide) and sodium alginate (an anionic polysaccharide). These beads are treated with CaCl(2) in order to improve the stability as well as the sorption capacity of the biosorbent. The resulting chitosan-alginate beads are characterized by BET surface area analysis, Fourier transformer infrared spectroscopy (FTIR) and wide-angle X-ray diffraction (WXRD) techniques. The efficiency of the biosorbent is studied by measuring the uptake using the equilibrium batch technique and breakthrough curves obtained from column flow experiments. The effect of pH, contact time, initial concentration of adsorbate and amount of biosorbent on adsorption capacity of the biosorbent is investigated. The equilibrium adsorption data are fitted to first-order and second-order kinetic equations, and to Weber-Morris model. The Freundlich, Langmuir and Dubinin-Radushkevich (D-R) adsorption isotherm models are used for the description of the biosorption process. Further, column break-through curves are obtained and the sorbent loaded with phenol and o-chlorophenol is regenerated using 0.1M NaOH solution. The experimental results suggest that the chitosan-calcium alginate blended biosorbent is effective for the removal of phenol and o-chlorophenol from an aqueous medium.

Physicochemical properties of an insensitive munitions compound, N-methyl-4-nitroaniline (MNA).

Accurate information on physicochemical properties of an organic contaminant is essential for predicting its environmental impact and fate. These properties also provide invaluable information for the overall understanding of environmental distribution, biotransformation, and potential treatment processes. In this study the aqueous solubility (Sw), octanol-water partition coefficient (Kow), and Henry's law constant (K(H)) were determined for an insensitive munitions (IM) compound, N-methyl-4-nitroaniline (MNA), at 298.15, 308.15, and 318.15 K. Effect of ionic strength on solubility, using electrolytes such as NaCl and CaCl2, was also studied. The data on the physicochemical parameters were correlated using the standard Van't Hoff equation. All three properties exhibited a linear relationship with reciprocal temperature. The enthalpy and entropy of phase transfer were derived from the experimental data.

Removal of arsenic (III) and arsenic (V) from aqueous medium using chitosan-coated biosorbent.

A biosorbent was prepared by coating ceramic alumina with the natural biopolymer, chitosan, using a dip-coating process. Removal of arsenic (III) (As(III)) and arsenic (V) (As(V)) was studied through adsorption on the biosorbent at pH 4.0 under equilibrium and dynamic conditions. The equilibrium adsorption data were fitted to Langmuir, Freundlich, and Redlich-Peterson adsorption models, and the model parameters were evaluated. All three models represented the experimental data well. The monolayer adsorption capacity of the sorbent, as obtained from the Langmuir isotherm, is 56.50 and 96.46 mg/g of chitosan for As(III) and As(V), respectively. The difference in adsorption capacity for As(III) and As(V) was explained on the basis of speciation of arsenic at pH 4.0. Column adsorption results indicated that no arsenic was found in the effluent solution up to about 40 and 120 bed volumes of As(III) and As(V), respectively. Sodium hydroxide solution (0.1M) was found to be capable of regenerating the column bed.

Biosorption of hexavalent chromium using tamarind (Tamarindus indica) fruit shell-a comparative study

The adsorption of chromium (VI) ions from aqueous solutions has been investigated on crude tamarind fruit shell, HCl treated and Oxalic acid treated shells at room temperatures. The biosorbents are characterized by FT-IR, EDXRF and porosimetry. The biosorption experiments are conducted through batch system. The influence of different experimental parameters such as pH, effect of initial metal ion concentration and effect of dosage of adsorbent on biosorption are evaluated. The adsorption followed first order kinetics. The data are fitted well to Langmuir and Freundlich isotherm models. A comparison is drawn on the extent of biosorption between untreated and treated forms of the tamarind shells. Due to their outstanding adsorption capacities, tamarind shells are excellent sorbents for the removal of chromium ions.

Adsorption of phenol and p-chlorophenol from their single and bisolute aqueous solutions on Amberlite XAD-16 resin.

Removal of phenol and p-chlorophenol from synthetic single and bisolute aqueous solutions at 303.15 K through adsorption on Amberlite XAD-16 resin under batch equilibrium and dynamic column experimental conditions was investigated. The equilibrium adsorption data from single component solutions were fitted to Langmuir and Freundlich adsorption isotherm models to evaluate the model parameters and the parameters in turn were used to predict the extent of adsorption from bisolute aqueous solutions using Ideal Solution Adsorption (IAS) model. The effect of pH on removal of phenol and p-chlorophenol from single and bisolute systems was studied. The breakthrough capacity and total capacity of the resin for the adsorbates at different concentrations were evaluated through column adsorption studies. Attempts were made to regenerate the resin by solvent washing using methanol as an eluent. The limited number of adsorption-desorption cycles indicated that the adsorption capacity of the resin remained unchanged.

Removal of hexavalent chromium from wastewater using a new composite chitosan biosorbent.

A new composite chitosan biosorbent was prepared by coating chitosan, a glucosamine biopolymer, onto ceramic alumina. The composite bioadsorbent was characterized by high-temperature pyrolysis, porosimetry, scanning electron microscopy, and X-ray photoelectron spectroscopy. Batch isothermal equilibrium and continuous column adsorption experiments were conducted at 25 degrees C to evaluate the biosorbent for the removal of hexavalent chromium from synthetic as well as field samples obtained from chrome plating facilities. The effect of pH, sulfate, and chloride ion on adsorption was also investigated. The biosorbent loaded with Cr(VI) was regenerated using 0.1 M sodium hydroxide solution. A comparison of the results of the present investigation with those reported in the literature showed that chitosan coated on alumina exhibits greater adsorption capacity for chromium(VI). Further, experimental equilibrium data were fitted to Langmuir and Freundlich adsorption isotherms, and values of the parameters of the isotherms are reported. The ultimate capacity obtained from the Langmuir model is 153.85 mg/g chitosan.