Pulsed-CPT Cs-Ne microcell atomic clock with frequency stability below 2 × 10-12 at 105 s.

We report on the mid-term stability progress of a table-top coherent population trapping (CPT) microcell atomic clock, previously limited by light-shift effects and variations of the cell's inner atmosphere. The light-shift contribution is now mitigated through the use of a pulsed symmetric auto-balanced Ramsey (SABR) interrogation technique, combined with setup temperature, laser power, and microwave power stabilization. In addition, Ne buffer gas pressure variations in the cell are now greatly reduced through the use of a micro-fabricated cell built with low permeation alumino-silicate glass (ASG) windows. Combining these approaches, the clock Allan deviation is measured to be 1.4 × 10-12 at 105 s. This stability level at one day is competitive with the best current microwave microcell-based atomic clocks.

Cs microcell optical reference with frequency stability in the low 10-13 range at 1 s.

We describe a high-performance optical frequency reference based on dual-frequency sub-Doppler spectroscopy (DFSDS) using a Cs vapor microfabricated cell and an external-cavity diode laser at 895 nm. Measured against a reference optical signal extracted from a cavity-stabilized laser, the microcell-stabilized laser demonstrates an instability of 3 × 10-13 at 1 s, in agreement with a phase noise of +40 dBrad2/Hz at 1-Hz offset frequency, and below 5 × 10-14 at 102 s. The laser short-term stability limit is in good agreement with the intermodulation effect from the laser frequency noise. These results suggest that DFSDS is a valuable approach for the development of ultra-stable microcell-based optical standards.

Wafer-level vapor cells filled with laser-actuated hermetic seals for integrated atomic devices.

Atomic devices such as atomic clocks and optically-pumped magnetometers rely on the interrogation of atoms contained in a cell whose inner content has to meet high standards of purity and accuracy. Glass-blowing techniques and craftsmanship have evolved over many decades to achieve such standards in macroscopic vapor cells. With the emergence of chip-scale atomic devices, the need for miniaturization and mass fabrication has led to the adoption of microfabrication techniques to make millimeter-scale vapor cells. However, many shortcomings remain and no process has been able to match the quality and versatility of glass-blown cells. Here, we introduce a novel approach to structure, fill and seal microfabricated vapor cells inspired from the century-old approach of glass-blowing, through opening and closing single-use zero-leak microfabricated valves. These valves are actuated exclusively by laser, and operate in the same way as the "make-seals" and "break-seals" found in the filling apparatus of traditional cells. Such structures are employed to fill cesium vapor cells at the wafer-level. The make-seal structure consists of a glass membrane that can be locally heated and deflected to seal a microchannel. The break-seal is obtained by breaching a silicon wall between cavities. This new approach allows adapting processes previously restricted to glass-blown cells. It can also be extended to vacuum microelectronics and vacuum-packaging of micro-electro-mechanical systems (MEMS) devices.

Mitigation of Temperature-Induced Light-Shift Effects in Miniaturized Atomic Clocks.

The demonstration of miniature atomic clocks (MACs) based on coherent population trapping (CPT) with improved mid- and long-term frequency stability benefits from the implementation of additional stabilization loops to reduce temperature-induced light-shift effects. In this article, we report and highlight the individual and combined benefits of such servo loops on the frequency stability of a CPT-based MAC. The first loop stabilizes the actual temperature of the vertical-cavity surface-emitting laser (VCSEL) chip using a compensation method in which the reading of external temperature variations is derived from the atomic vapor output signal. The second loop maintains the total microwave power absorbed by the laser to a value that maximizes the optical absorption and significantly reduces the laser power dependence of the clock frequency. Experimental tests are performed onto a miniaturized CPT-clock physics package using a chip-VCSEL tuned on the Cs D1 line ( λ = 895 nm). The VCSEL temperature compensation technique improves, by a factor of 4, the Allan deviation of the clock at 104 s. The simultaneous operation of both servo loops improves, by a factor of 7, the clock fractional frequency stability at 104 s. The clock demonstrates a fractional frequency stability of 7.5×10 -11 at 1 s and better than 2×10-11 at 1 day.

Laser light routing in an elongated micromachined vapor cell with diffraction gratings for atomic clock applications.

This paper reports on an original architecture of microfabricated alkali vapor cell designed for miniature atomic clocks. The cell combines diffraction gratings with anisotropically etched single-crystalline silicon sidewalls to route a normally-incident beam in a cavity oriented along the substrate plane. Gratings have been specifically designed to diffract circularly polarized light in the first order, the latter having an angle of diffraction matching the (111) sidewalls orientation. Then, the length of the cavity where light interacts with alkali atoms can be extended. We demonstrate that a longer cell allows to reduce the beam diameter, while preserving the clock performances. As the cavity depth and the beam diameter are reduced, collimation can be performed in a tighter space. This solution relaxes the constraints on the device packaging and is suitable for wafer-level assembly. Several cells have been fabricated and characterized in a clock setup using coherent population trapping spectroscopy. The measured signals exhibit null power linewidths down to 2.23 kHz and high transmission contrasts up to 17%. A high contrast-to-linewidth ratio is found at a linewidth of 4.17 kHz and a contrast of 5.2% in a 7-mm-long cell despite a beam diameter reduced to 600 µm.