ABSTRACT
A simple, cost-effective, and efficient differential pulse voltammetric (DPV) assay for monitoring spiramycin adipate (SPA) in its dosage forms, urine, and milk samples at an activated glassy carbon electrode (GCE) was developed. GCE was electrochemically activated by anodization at a high positive voltage (2.5 V). The activated glassy carbon electrode (AGCE) was surface characterized, optimized, and utilized for the electrochemical assay of SPA. The electrochemical behavior of the AGCEs was investigated using cyclic voltammetry (CV) which shows a remarkable increase in the anodic peak of SPA in comparison with GCE. This behavior reflects a remarkable increase in the electrocatalytic oxidation of SPA at AGCE. The impacts of various parameters such as scan rate, accumulation time, and pH were investigated. The analytical performance of the activated glassy carbon electrodes was studied utilizing DPV. Under optimum conditions, the oxidation peak current exhibited two linear ranges of 80 nm to 0.8 µM and 0.85-300 µM with a lower limit of detection (LOD) of 20 nM. The developed assay exhibited high sensitivity, excellent repeatability, and good selectivity. Additionally, the developed SPA-sensitive modified GCE was successfully applied for SPA assay in its pharmaceutical dosage form and diluted biological fluids as well, with satisfactory recovery results which correlated well with the results obtained using spectrophotometry.
ABSTRACT
Glassy carbon electrode (GCE) was electrochemically activated using a repetitive cyclic voltammetric technique to develop an activated glassy carbon electrode (AGCE). The developed AGCE was optimized and utilized for the electrochemical assay of 4-nitrophenol (4-NP) and dopamine (DA). Cyclic voltammetry (CV) was employed to investigate the electrochemical behavior of the AGCE. Compared to the bare GCE, the developed AGCE exhibits a significant increase in redox peak currents of 4-NP and DA, which indicates that the AGCE significantly improves the electrocatalytic reduction of 4-NP and oxidation of DA. The electrochemical signature of the activation process could be directly associated with the formation of oxygen-containing surface functional groups (OxSFGs), which are the main reason for the improved electron transfer ability and the enhancement of the electrocatalytic activity of the AGCE. The effects of various parameters on the voltammetric responses of the AGCE toward 4-NP and DA were studied and optimized, including the pH, scan rate, and accumulation time. Differential pulse voltammetry (DPV) was also utilized to investigate the analytical performance of the AGCE sensing platform. The optimized AGCE exhibited linear responses over the concentration ranges of 0.04-65 µM and 65-370 µM toward 4-NP with a lower limit of detection (LOD) of 0.02 µM (S/N = 3). Additionally, the AGCE exhibited a linear responses over the concentration ranges of 0.02-1.0 and 1.0-100 µM toward DA with a lower limit of detection (LOD) of 0.01 µM (S/N = 3). Moreover, the developed AGCE-based 4-NP and DA sensors are distinguished by their high sensitivity, excellent selectivity, and repeatability. The developed sensors were successfully applied for the determination of 4-NP and DA in real samples with satisfactory recovery results.
ABSTRACT
Several reports in the literature deal with the modification of glassy carbon electrode (GCE) surface via electropolymerization of some organic monomers, particularly p-aminobenzenesulfonic acid (p-ABSA) and l-cysteine using intensive oxidative conditions, and attributed the improved electrocatalytic activities toward various analytes to the formation of the electropolymerized layer. What is the real cause for this improvement in electrocatalytic activity? Is it because of the electrochemical activation process of GCE or electropolymerization? Combining a set of surface and electrochemical characterization techniques, we first showed that the electrochemical peaks previously assigned in many reports to electropolymerization processes at the surface of GCE correspond to electrochemical activation of the GCE surface. We further demonstrated that the anodization of GCE at high voltage causes activation of its surface and the formation of surface functional groups (SFGs). In fact, those SFGs are found to be the main reason for the enhancement in electrocatalytic activity of the activated GCE (AGCE). The surface features of the modified electrodes were characterized by Raman spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The electrochemical behavior was investigated using cyclic voltammetry (CV). The analytical performance of AGCE toward dopamine (DA) was assessed using differential pulse voltammetry (DPV). As compared to the previously reported dopamine electrochemical sensors assuming such electropolymerization processes, the AGCE showed analytical performance practically similar to that of these sensors. This further confirms that the enhancement in electrocatalytic activity is due to the electrochemical activation of the GCE surface.
