ABSTRACT
In this work, three nanoparticle samples, Ni4Co2Pt/CNFs, Ni5CoPt/CNFs and Ni6Pt/CNFs, were designed according to the molar ratio during loading on carbon nanofibers (CNFs) using electrospinning and carbonization at 900 °C for 7 h in an argon atmosphere. The metal loading and carbon ratio were fixed at 20 and 80 wt%, respectively. Various analysis tools were used to investigate the chemical composition, structural, morphological, and electrochemical (EC) properties. For samples with varying Co%, the carbonization process reduces the fiber diameter of the obtained electrospun nanofibers from 200-580 nm to 150-200 nm. The EDX mapping revealed that nickel, platinum, and cobalt were evenly and uniformly incorporated into the carbonized PVANFs. The prepared Ni-Co-Pt/CNFs have a face-centered cubic (FCC) structure with slightly increased crystallite size as the Co% decreased. The electrocatalytic properties of the samples were investigated for ethanol, methanol and urea electrooxidation. Using cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance measurements, the catalytic performance and electrode stability were investigated as a function of electrolyte concentration, scan rate, and reaction time. When Co is added to Ni, the activation energy required for the electrooxidation reaction decreases and the electrode stability increases. In 1.5 M methanol, the Ni5CoPt/CNFs electrode showed the lowest onset potential and the highest current density (30.6 A/g). This current density is reduced to 28.2 and 21.2 A/g for 1.5 M ethanol and 0.33 M urea, respectively. The electrooxidation of ethanol, methanol, and urea using our electrocatalysts is a combination of kinetic/diffusion control limiting reactions. This research provided a unique approach to developing an efficient Ni-Co-Pt-based electrooxidation catalyst for ethanol, methanol and urea.
ABSTRACT
Two processes for crosslinking polyvinyl alcohol (PVA) with sulfosuccinic acid (SSA) and thermal crosslinking were used to fabricate a proton exchange membrane (PEM). Such PEMs are used in different fields involving fuel cell applications. The crosslinking reaction between PVA and SSA was confirmed using Fourier-transform infrared (FTIR) spectroscopy. The characterization of the prepared membranes, namely, ion exchange capacity (IEC), thermal analyses, water uptake, and ionic conductivity, was carried out. The IEC of the prepared membranes was found to be between 0.084 and 2.086 mmol g-1, resulting in an essential increase in the ionic conductivity. It was observed that the ionic conductivity was in the range of 0.003-0.023 S cm-1, depending on both temperature and SSA content. From the thermogravimetric analysis (TGA) results, it was revealed that the thermal stability of the crosslinked membranes improved. Moreover, water uptake decreased with increasing SSA content. Positron annihilation lifetime spectroscopy (PALS) was used to study the microstructure of the PVA/SSA membranes and their distribution at different ambient temperatures and relative humidity (RH) values. At room temperature, no significant change was observed in the free-volume holes up to 15 wt% SSA; thereafter, the size of the free-volume holes increased with the SSA content. The PALS results show that at different humidity values, the size of the free-volume holes for crosslinked PVA/SSA membranes is lower than those for Nafion membranes, i.e., the gas permeability for the prepared PVA/SSA membranes is less than that for the Nafion membrane. In addition, a strong correlation between the water uptake, ionic conductivity, tensile strength, and free-volume holes was observed.
