Spectrofluorometric determination of some beta-blockers in tablets and human plasma using 9,10-dimethoxyanthracene-2-sodium sulfonate.

A simple and sensitive spectrofluorometric method was developed for the quantitative determination of some beta-blockers, namely arotinolol, atenolol and labetalol as hydrochloride salts. The method is based on the reaction of these drugs as n-electron donors with the fluorogenic reagent 9,10-dimethoxy-2-anthracene sulfonate (DMAS) as pi-acceptor in acidic medium. The obtained ion-pairs were extracted into chloroform and measured spectrofluorometrically at 452 nm after excitation at 385 nm. The fluorescence intensity-concentration plots are rectilinear over the ranges of 0.5-5 microg x ml(1), 1.0-11.0 microg x ml(1) and 0.6-6.4 microg x ml(1) for labetalol, atenolol and arotinolol, respectively. The different parameters affecting the reaction pathway were thoroughly studied and optimized. No interference was observed from the common pharmaceutical excipients. The proposed method was successfully applied to the analysis of tablets and the results were statistically compared with those obtained by reference methods. The method was further extended to the in vitro determination of the drugs in spiked human plasma, the % recoveries (n = 3) ranged from 96.98 +/- 1.55 to 98.28 +/- 2.19. A proposal of the reaction pathway was postulated.

Simple spectrophotometric determination of cinnarizine in its dosage forms.

A direct, extraction-free spectrophotometric method has been developed for the determination of cinnarizine in pharmaceutical preparations. The method is based on ion-pair formation between the drug and three acidic (sulphonphthalein) dyes; namely bromocresol green (BCG), bromocresol purple (BCP) and bromophenol blue (BPB) which induces an instantaneous bathochromic shift of the maximum in the drug spectrum. Conformity to Beer's law enabled the assay of dosage forms of the drug. Compared with a reference method, the results obtained were of equal accuracy and precision. A more detailed investigation of the cinnarizine-BCG ion pair complex was made with respect to its composition, association constant and free energy change. In addition, this method was also found to be specific for the analysis of cinnarizine in the presence of some of the co-formulated drugs, such as pyridoxine hydrochloride and digoxin.

Polarographic behaviour and determination of acrivastine in capsules and human urine.

A sensitive method for the quantitative determination of acrivastine was developed based on the reduction of the drug at the dropping mercury electrode. A well-developed polarographic wave was produced in Britton-Robinson buffers over the pH range 0.0-11. The overall reduction process was diffusion-controlled with limited adsorption properties. At pH 5, the diffusion-current constant (I(d)) was 5.45+/-0.05 (n=9). The current versus concentration plot was linear over the range 1.2-20.0 and 0.4-12.0 mug/ml using the direct current tast (DC(t)) and differential pulse polarography modes, respectively, with a minimum detectability (S/N=3) of 0.03 mug/ml (8.6x10(-7) M) using the latter technique. The mechanism for the reduction was suggested and the number of electrons involved in the electrode reduction was established. The method was applied for the determination of acrivastine in capsules. Pseudoephedrine, which is frequently co-formulated with acrivastine, did not interfere with the assay. The method was also successfully applied to spiked human urine, the percent recovery (n=3) was 97.07 with a confidence limit (t.s.) of +/-2.33.

Spectrofluorimetric determination of vigabatrin and gabapentin in urine and dosage forms through derivatization with fluorescamine.

A stability-indicating, sensitive, simple and selective spectrofluorimetric method was developed for the determination of vigabatrin (VG) and gabapentin (GB). The method is based on the reaction between the two drugs and fluorescamine in borate buffer of pH 8.2 to give highly fluorescent derivatives that are measured at 472 nm using an excitation wavelength of 390 nm for both drugs. The optimum conditions were ascertained and the method was applied for the determination of VG and GB over the concentration range of 0.20-4.00 and 0.1-1.0 microg/ml, respectively with detection limits of 0.05 microg/ml (2.9 x 10(-7) M) and 0.06 microg/ml (2.3 x 10(-7) M) for VG and GB, respectively. The suggested method was applied, without any interference from the excipients, to the determination of the two drugs in their pharmaceutical formulations. Furthermore, the method was extended to the in-vitro determination of both drugs in spiked human urine. Interference from endogenous amino acids could be eliminated through selective complexation with copper acetate, the % recovery (n=4) is 98.0 +/- 7.05. Co-administered drugs such as lamotrigine, phenobarbitone, valproic acid, clopazam, carbamazepine, clonazepam and cimitidine did not interfere with the assay. The method is also stability-indicating; as the degradation product of vigabatrin: 5-vinylpyrrolidin-2-one, produced no interference with its analysis.

Voltammetric determination of nilvadipine in dosage forms and spiked human urine.

The voltammetric behaviour of nilvadipine was studied adopting direct-current, differential-pulse and alternating current polarography. Nilvadipine-being nitroderivative-exhibited well-defined cathodic waves over the whole pH range in Britton-Robinson buffers. At pH 5, the diffusion-current constant, (Id) was 4.78. The current-concentration plots are rectilinear over the range 1.5-20 and 0.2-10 microg/ml using the direct current and differential pulse-polarographic techniques with minimum detectability of 0.05 microg/ml (1.3 x 10(-7) M) using the latter technique. The proposed method was applied to commercial capsules containing the drug. The percentage recoveries were in agreement with those obtained by a reference method. Furthermore, the method was applied to spiked human urine, the percentage recovery was 95.54+/-2.137.

Spectrophotometric and HPLC determination of secnidazole in pharmaceutical tablets.

Simple and accurate spectrophotometric and HPLC methods were developed for the determination of secnidazole in tablets dosage form. The first spectrophotometric method depends on the reduction of secnidazole molecule with zinc dust and hydrochloric acid followed by condensation with either p-dimethylaminobenzaldehyde or anisaldehyde to give colored chromogens having absorbance at 494 and 398 nm, respectively. The second method was based on the reaction of the drug with sodium nitroprusside in the presence or absence of hydroxylammonium hydrochloride. The formed colored chromogens were measured at 584 and 508 nm, respectively. The experimental conditions were optimized and Beer's law was obeyed over the applicable concentration ranges. The application of HPLC procedures depended on using either a conventional or microbore reverse-phase (C18) column along with mobile phases consisting of water and methanol (30:70), at pH of 3.5. Both techniques were applied successfully for the analysis of secnidazole in tablets form. The results obtained from both procedures were statistically compared using the Student's-t and F-variance ratio tests.

Spectrophotometric methods for the determination of benazepril hydrochloride in its single and multi-component dosage forms.

Three sensitive and accurate methods are presented for the determination of benazepril in its dosage forms. The first method uses derivative spectrophotometry to resolve the interference due to formulation matrix. The second method depends on the color formed by the reaction of the drug with bromocresol green (BCG). The third one utilizes the reaction of benazepril, after alkaline hydrolysis, with 3-methylbenzothialozone (MBTH) hydrazone where the produced color is measured at 593 nm. The latter method was extended to develop a stability-indicating method for this drug. Moreover, the derivative method was applied for the determination of benazepril in its combination with hydrochlorothiazide. The proposed methods were applied for the analysis of benazepril in the pure form and in tablets. The coefficient of variation was less than 2%.

Spectrophotometric and spectrofluorometric methods for the assay of lisinopril in single and multicomponent pharmaceutical dosage forms.

Simple and sensitive methods are described for the assay of lisinopril in tablets. The first method (A) is based on the reaction of the drug with chloranil in aqueous solution of pH 9.5 to give yellow colour measured at 346 nm. The second method (B) is based upon the interaction of lisinopril with dichlone resulting in the formation of an intense purple colour measured at 580 nm. The third method (C) depends on the reaction of the drug with acetylacetone and formaldehyde to form a coloured condensation product measured at 356 nm and also has a strong fluorescence at 475 nm (lambda(ex) 410 nm). This method is extended to determine lisinopril in binary mixtures with hydrochlorothiazide. The last method (D) depends on measuring the first and second derivative spectra of lisinopril. Moreover, the derivative method is used as stability-indicating method where lisinopril can be determined in presence of its degradation products. The proposed methods proved to be suitable for a rapid quality control of commercial dosage forms. The results obtained were precise and accurate.

Simultaneous determination of melatonin-pyridoxine combination in tablets by zero-crossing derivative spectrophotometry and spectrofluorimetry.

Two methods have been developed for the analysis of melatonin (M) and pyridoxine hydrochloride (PH) in combination. The first method depends on first- and second-derivative ultraviolet spectrophotometry, with the zero crossing technique of measurement. First-derivative amplitudes at 296 nm and second-derivative amplitudes at 294 and 322 nm are selected for the determination of M and PH, respectively. The second method is based on the native fluorescence of both M and PH, in methanol and 0.1 M hydrochloric acid, respectively, after a preliminary solvent extraction procedure. The relative standard deviation of both methods was less than 2.0%. The two methods have been successfully applied to the determination of both drugs in laboratory-prepared mixtures and in tablets.

Simultaneous determination of tenoxicam and 2-aminopyridine using derivative spectrophotometry and high-performance liquid chromatography.

Derivative spectrophotometry and high-performance liquid chromatography (HPLC) were used to determine tenoxicam and one of its decomposition products (2-aminopyridine) simultaneously and in the presence of each other. The derivative procedure was based on the linear relationship between the tenoxicam concentration and the second derivative amplitudes at 390-348 nm (peak-to-trough) measurement. The 2-aminopyridine was determined through measuring the second derivative amplitude at 241 nm (zero-crossing for tenoxicam). For the HPLC procedure, a reversed-phase C8 column with a mobile phase composed of 0.02 M sodium acetate-methanol-acetonitrile (11:8:1) with 0.005 M heptane sulfonic acid sodium salt, as an ion pair, was used to separate both compounds with 2,4-dinitrochlorobenzene, as an internal standard, in reasonable time. The flow rate was 1.5 ml min-1 with a programmable ultraviolet (UV) detection at 300 and 375 nm. Both UV derivative spectrophotometric and HPLC approaches were followed for confirming the purity of tenoxicam in bulk and tablets dosage form.

Spectrophotometric determination of acrivastine in urine and capsules.

Three sensitive and accurate spectrophotometric methods are presented for the determination of the antihistaminic acrivastine (ACR) in capsules and urine. The first method utilizes the reaction of 2-nitrophenylhydrazine hydrochloride in presence of dicyclohexylcarbodiimide and pyridine. The violet colour of the resulting acid hydrazide is measured at 550 nm. The second method is based on alkaline oxidation of the drug with potassium permanganate and subsequent measurement of the formed manganate ion at 608 nm. The third method uses derivative spectrophotometry for the determination of ACR. The last method is extended to the in vitro determination of the drug in urine. All methods gave a relative standard deviation of less than 2%.

Spectrophotometric determination of methylphenobarbitone by use of orthogonal polynomials.

A direct spectrophotometric method for the determination of methylphenobarbitone in presence of degradation products is presented. The method is based on use of the combined polynomial method. The coefficient of the combined polynomial P(w), calculated over the wavelength range 228-272 nm at 4-nm intervals, is unaffected by the presence of any degradation products and is linearly related to the methylphenobarbitone concentration with a relative standard deviation of 0.4%. The mean recovery is 99.1 +/- 0.8%. The method can also be used for assessing the stability of methylphenobarbitone.

Utility of chloranil in assay of naphazoline, clemizole, penicillin G sodium, and piperazine.

A simple and sensitive spectrophotometric method is described for the assay of naphazoline, clemizole, penicillin G sodium, and piperazine. The method was based on the formation of a charge transfer complex between these drugs as n-donors and chloranil, the pi-acceptor. Conformity to Beer's law enabled the assay of dosage forms of these drugs. Compared with official methods, the results obtained were of equal accuracy. A more detailed investigation of th naphazoline-chloranil complex was made with respect to its composition, association constant, and free energy change.

Colorimetric determination of some sulphonamides with phenothiazine.

Two simple and sensitive calorimetric procedures for determination of some sulphonamides with phenothiazine (thiodiphenylamine) are presented. One is based on reaction in aqueous alcohol solution in presence of hypochlorite, with direct measurement at 515 nm. The other is based on reaction in presence of copper(II) acetate at 70 degrees , extraction with chloroform and measurement at 515 nm. The method is applied to the determination of sulphonamides in pure and tablet form, with a coefficient of variation less than 2%.