Precision Medicine in Erythropoietin Deficiency and Treatment Resistance: A Novel Approach to Management of Anaemia in Chronic Kidney Disease.

The study of anaemia is a well-developed discipline where the concepts of precision medicine have, in part, been researched extensively. This review discusses the treatment of erythropoietin (EPO) deficiency anaemia and resistance in cases of chronic kidney disease (CKD). Traditionally, erythropoietin-stimulating agents (ESAs) and iron supplementation have been used to manage anaemia in cases of CKD. However, these treatments pose potential risks, including cardiovascular and thromboembolic events. Newer treatments have emerged to address these risks, such as slow-release and low-dosage intravenous iron, oral iron supplementation, and erythropoietin-iron combination therapy. Another novel approach is the use of hypoxia-inducible factor prolyl hydroxylase inhibitors (HIF-PHIs). This review highlights the need for precision medicine targeting the genetic components of EPO deficiency anaemia in CKD and discusses individual variability in genes such as the erythropoietin gene (EPO), the interleukin-ß gene (IL-ß), and the hypoxia-inducible factor gene (HIF). Pharmacogenetic testing aims to provide targeted therapies and interventions that are tailored to the specific characteristics of an individual, thus optimising treatment outcomes and minimising resistance and adverse effects. This article concludes by suggesting that receptor modification has the potential to revolutionise the treatment outcomes of patients with erythropoietin deficiency anaemia through the integration of the mentioned approach.

Genetic Markers of Insulin Resistance and Atherosclerosis in Type 2 Diabetes Mellitus Patients with Coronary Artery Disease.

Type 2 diabetes mellitus (T2DM) is characterized by impaired insulin secretion on a background of insulin resistance (IR). IR and T2DM are associated with atherosclerotic coronary artery disease (CAD). The mechanisms of IR and atherosclerosis are known to share similar genetic and environmental roots. Endothelial dysfunction (ED) detected at the earliest stages of IR might be the origin of atherosclerosis progression. ED influences the secretion of pro-inflammatory cytokines and their encoding genes. The genes and their single nucleotide polymorphisms (SNPs) act as potential genetic markers of IR and atherosclerosis. This review focuses on the link between IR, T2DM, atherosclerosis, CAD, and the potential genetic markers CHI3L1, CD36, LEPR, RETN, IL-18, RBP-4, and RARRES2 genes.

Glycemic effects of simvastatin: Where do we stand?

ABSTRACT In clinical practice, simvastatin is usually used in the treatment of dyslipidemia patients and those at risk of or with established cardiovascular disease. However, previous studies have shown that simvastatin has the potential to affect glycemic parameters as it reportedly reduced insulin secretion and sensitivity. The exact mechanism by which simvastatin affects glycemia is still unknown, but previous studies have postulated the involvement of the glucose-insulin secretion mechanism. This review focuses on the effects of simvastatin, either alone or in combination with other lipid lowering agents, antidiabetics and antihypertensives, on glucose homeostasis. Some studies have reported that simvastatin might impair the levels of glucose metabolism markers in the blood while others have reported no effect or improvement in glycemia.

Polyesters Based on Linoleic Acid for Biolubricant Basestocks: Low-Temperature, Tribological and Rheological Properties.

Presently, plant oils which contain high percentage of linoleic acid 1 are perceived to be a viable alternative to mineral oil for biolubricant applications due to their biodegradability and technical properties. In order to get biodegradable lubricant, triester derivatives compounds (1-5) were synthesized and characterized. The processes involved were monoepoxidation of linoleic acid 2, oxirane ring opening 3, esterification 4 and acylation 5. The structures of the products were confirmed by FTIR, 1H and 13C-NMR and LC-MS. The results that showed lowest temperature properties were obtained for triester 5, with a pour point value (PP) of -73°C, highest onset temperature (260°C) and lowest volatility at 0.30%. Viscosity index (VI) increased for the ester's synthetic compounds (2, 3, 4, 5), while the PP decreased. This behavior is the result of the increase of the chain length of the branching agents. Triester based linoleic acid has improved properties such as low-temperature and tribological properties. These results will make it feasible for plant oil to be used for biolubricants, fuels in chain saws, transmission oil and brake fluid.

Genetic polymorphisms associated with overweight and obesity in uncontrolled Type 2 diabetes mellitus.

Generally, obese and overweight individuals display higher free fatty acid levels, which stimulate insulin resistance. The combination of overweight or obesity with insulin resistance can trigger Type 2 diabetes mellitus (T2DM) and are primary contributing factors to the development of uncontrolled T2DM. Genetic polymorphisms also play an important role as they can impact a population's susceptibility to becoming overweight or obese and developing related chronic complications, such as uncontrolled T2DM. This review specifically examines the genetic polymorphisms associated with overweight and obesity in patients with uncontrolled T2DM. Particularly, gene polymorphisms in ADIPOQ (rs1501299 and rs17300539), LepR (rs1137101 and rs1045895), IRS2 (rs1805092), GRB14 (rs10195252 and rs3923113) and PPARG (rs1801282) have been associated with overweight and obesity in uncontrolled T2DM.

Synthesis, reactivity and application studies for different biolubricants.

Vegetable oils have different unique properties owing to their unique chemical structure. Vegetable oils have a greater ability to lubricate and have higher viscosity indices. Therefore, they are being more closely examined as base oil for biolubricants and functional fluids. In spite of their many advantages, vegetable oils suffer from two major drawbacks of inadequate oxidative stability and poor low-temperature properties, which hinder their utilization as biolubricant base oils. Transforming alkene groups in fatty acids to other stable functional groups could improve the oxidative stability, whereas reducing structural uniformity of the oil by attaching alkyl side chains could improve the low-temperature performance. In that light, the epoxidation of unsaturated fatty acids is very interesting as it can provide diverse side chains arising from the mono- or di-epoxidation of the unsaturated fatty acid. Oxirane ring opening by an acid-catalyzed reaction with a suitable reagent provides interesting polyfunctional compounds.

Synthesis and optimization ring opening of monoepoxide linoleic acid using p-toluenesulfonic acid.

Biolubricant base oils, 9,12-hydroxy-10,13-oleioxy-12-octadecanoic acid (HYOOA) was synthesized based on the esterification reaction of Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) with oleic acid (OA) and catalyzed by p-Toluenesulfonic acid. The optimum conditions for the experiment using D-optimal design to obtain high yield% of 84.61, conversion% of 83.54 and lowest OOC% of 0.05 were predicted at OA/MEOA ratio of 0.2:1 (mol/mol), PTSA/MEOA ratio of 0.4:1 (mol/mol), reaction temperature at 110°C, and reaction time at 4.5 h. The FTIR peaks of HYOOA indicate the disappearance of the absorption band at 820 cm(-1), which belongs to the oxirane ring. (13)C and (1)H NMR spectra analyses confirmed the result of HYOOA with appearance carbon-ester (C = O) chemical shift at 174.1 ppm and at 4.06 ppm for (13)C and (1)H NMR respectively.

Biolubricant basestocks from chemically modified plant oils: ricinoleic acid based-tetraesters.

BACKGROUND: Plant oils have been investigated as a potential source of environmentally favorable biolubricants because of their biodegradability, renewability and excellent lubrication performance. Low oxidation and thermal stability, poor low-temperature properties and a narrow range of available viscosities, however, limit their potential application as industrial lubricants. The inherent problems of plant oils can be improved by attaching functional groups at the sites of unsaturation through chemical modifications. In this article, we will demonstrate how functionalization helps overcome these disadvantages. RESULTS: In this work, mono-, tri- and tetra-esters have been synthesized, including 10,12-dihydroxy-9-(stearoyloxy)octadecanoic acid 3; 9,10,12-tris(stearoyloxy)octadecanoic acid 4; and 18-(4-ethylhexyloxy)-18-oxooctadecane-7,9,10-triyl tristearate 5. Pour-point and cloud-point measurements have shown that these derivatives have improved low-temperature properties as compared to the precursor. The tetra ester compound, 18-(4-ethylhexyloxy)-18-oxooctadecane-7,9,10-triyl tristearate 5, had the lowest pour point (PP) (-44.37°C) and the lowest cloud point (CP) (-41.25°C). This derivatization also improved the compound's thermo-oxidative stability, measured using pressurized differential scanning calorimetry (PDSC) and thin-film micro-oxidation (TFMO) testing. 18-(4-Ethylhexyloxy)-18-oxooctadecane-7,9,10-triyl tristearate 5 also had the highest onset temperature (OT) (282.10°C) and the lowest volatile loss and insoluble deposit (37.39% and 50.87%, respectively). Furthermore, the compounds' tribological behaviors were evaluated using the four-ball method. 18-(4-Ethylhexyloxy)-18-oxooctadecane-7,9,10-triyl tristearate 5 also had the lowest coefficient of friction (µ) (0.44). CONCLUSIONS: The results showed that, in general, these derivatives have good anti-wear and friction-reducing properties at relatively low concentrations under all of the test loads. Overall, the data indicates that these derivatives have significant potential to be used as biolubricant basestocks.

New photostabilizers for polystyrene based on 2,3-dihydro-(5-mercapto-1,3,4-oxadiazol-2-yl)-phenyl-2-(substituted)-1,3,4-oxazepine- 4,7-dione compounds.

The photostabilization of polystyrene (PS) films by 2,3-dihydro-(5-mercapto-1,3,4-oxadiazol-2-yl)-phenyl-2-(substituted)-1,3,4-oxazepine-4,7-dione compounds was investigated. PS films containing concentration of complexes 0.5% by weight were produced by the casting method from chloroform as a solvent. The photostabilization activities of these compounds were determined by monitoring the carbonyl and hydroxyl indices with irradiation time. The changes in viscosity average molecular weight of PS with irradiation time were also tracked (using benzene as a solvent). The quantum yield of the chain scission (Φcs) of these complexes in PS films was evaluated and found to range between 3.31 × 10(-6) and 7.89 × 10(-6). Results obtained showed that the rate of photostabilization of PS in the presence of the additive follows the trend (I > II > III > IV). According to the experimental results obtained, several mechanisms were suggested depending on the structure of the additive like UV absorption, peroxide decomposer and radical scavenger.

Selectively increasing of polyunsaturated (18:2) and monounsaturated (18:1) fatty acids in Jatropha curcas seed oil by crystallization using D-optimal design.

BACKGROUND: This study was done to obtain concentrated polyunsaturated fatty acid (PUFA) linoleic acid (LA; 18:2) and monounsaturated fatty acid (MUFA) oleic acid (OA; 18:1) from Jatropha curcas seed oil by urea complexation. Urea complexation is a method used by researchers to separate fatty acids (FAs) based on their molecular structure. Effects the ratio of urea-to-FAs, crystallization temperature and crystallization time on the final products of urea complexation were examined. D-optimal Design was employed to study the significance of these factors and the optimum conditions for the technique were predicted and verified. RESULTS: Optimum conditions of the experiment to obtain maximum concentration of LA were predicted at urea-to-FAs ratio (w/w) of 5:1, crystallization temperature of -10°C and 24 h of crystallization time. Under these conditions, the final non-urea complex fraction (NUCF) was predicted to contain 92.81% of LA with the NUCF yield of 7.8%. The highest percentage of OA (56.01%) was observed for samples treated with 3:1 urea-to-FAs ratio (w/w) at 10°C for 16 h. The lowest percentage of LA (8.13%) was incorporated into urea complex fraction (UCF) with 1:1 urea-to-FAs ratio (w/w) at 10°C for 8 h. CONCLUSIONS: The separation of PUFA (LA) and MUFA (OA) described here. Experimental variables should be carefully controlled in order to recover a maximum content of PUFA and MUFA of interest with reasonable yield% with a desirable purity of fatty acid of interest.

Rubber (Hevea brasiliensis) seed oil toxicity effect and Linamarin compound analysis.

BACKGROUND: The lipid fraction of rubber (Hevea brasiliensis (kunth. Muell)) seed was extracted and analyzed for toxicological effect. The toxicological compound such as linamarin in rubber seed oil (RSO) extracted using different solvents, such as hexane (RSOh), mixture of chloroform + methanol (RSOchl+mth) and ethanol (RSOeth) were also studied. Various methods analysis such as Fourier transforms infrared spectroscopy (FTIR) and colorimetric methods were carried out to determine the present of such compounds. RESULTS: FTIR spectrum of RSO did not show any presence of cyanide peak. The determination of cyanide by using colorimetric method was demonstrated no response of the cyanide in RSO and didn't show any colored comparing with commercial cyanide which observed blue color. The results showed that no functional groups such as cyanide (C ≡ N) associated with linamarin were observed. Toxicological test using rats was also conducted to further confirm the absence of such compounds. RSO did not show any toxic potential to the rats. Bioassay experiments using shrimps had been used as test organisms to evaluate the toxicity of linamarin extract from RSO(h,) RSO(chl+mth) and RSO(eth) and LC50 were found to be (211.70 %, 139.40 %, and 117.41 %, respectively). CONCLUSIONS: This can be attributed no hazardous linamarin were found in RSO.

Production of chemoenzymatic catalyzed monoepoxide biolubricant: optimization and physicochemical characteristics.

Linoleic acid (LA) is converted to per-carboxylic acid catalyzed by an immobilized lipase from Candida antarctica (Novozym 435). This per-carboxylic acid is only intermediate and epoxidized itself in good yields and almost without consecutive reactions. Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) was optimized using D-optimal design. At optimum conditions, higher yield% (82.14) and medium oxirane oxygen content (OOC) (4.91%) of MEOA were predicted at 15 µL of H(2)O(2), 120 mg of Novozym 435, and 7 h of reaction time. In order to develop better-quality biolubricants, pour point (PP), flash point (FP), viscosity index (VI), and oxidative stability (OT) were determined for LA and MEOA. The results showed that MEOA exhibited good low-temperature behavior with PP of -41(°)C. FP of MEOA increased to 128(°)C comparing with 115(°)C of LA. In a similar fashion, VI for LA was 224 generally several hundred centistokes (cSt) more viscous than MEOA 130.8. The ability of a substance to resist oxidative degradation is another important property for biolubricants. Therefore, LA and MEOA were screened to measure their OT which was observed at 189 and 168(°)C, respectively.

Improvement of physicochemical characteristics of monoepoxide linoleic acid ring opening for biolubricant base oil.

For environmental reasons, a new class of environmentally acceptable and renewable biolubricant based on vegetable oils is available. In this study, oxirane ring opening reaction of monoepoxide linoleic acid (MEOA) was done by nucleophilic addition of oleic acid (OA) with using p-toluene sulfonic acid (PTSA) as a catalyst for synthesis of 9(12)-hydroxy-10(13)-oleoxy-12(9)-octadecanoic acid (HYOOA) and the physicochemical properties of the resulted HYOOA are reported to be used as biolubricant base oils. Optimum conditions of the experiment using D-optimal design to obtain high yield% of HYOOA and lowest OOC% were predicted at OA/MEOA ratio of 0.30 : 1 (w/w), PTSA/MEOA ratio of 0.50 : 1 (w/w), reaction temperature at 110°C, and reaction time at 4.5 h. The results showed that an increase in the chain length of the midchain ester resulted in the decrease of pour point (PP) -51°C, increase of viscosity index (VI) up to 153, and improvement in oxidative stability (OT) to 180.94°C.

Hydrolysis optimization and characterization study of preparing fatty acids from Jatropha curcas seed oil.

BACKGROUND: Fatty acids (FAs) are important as raw materials for the biotechnology industry. Existing methods of FAs production are based on chemical methods. In this study potassium hydroxide (KOH)-catalyzed reactions were utilized to hydrolysis Jatropha curcas seed oil. RESULTS: The parameters effect of ethanolic KOH concentration, reaction temperature, and reaction time to free fatty acid (FFA%) were investigated using D-Optimal Design. Characterization of the product has been studied using Fourier transforms infrared spectroscopy (FTIR), gas chromatography (GC) and high performance liquid chromatography (HPLC). The optimum conditions for maximum FFA% were achieved at 1.75M of ethanolic KOH concentration, 65°C of reaction temperature and 2.0 h of reaction time. CONCLUSIONS: This study showed that ethanolic KOH concentration was significant variable for J. curcas seed oil hydrolysis. In a 18-point experimental design, FFA% of hydrolyzed J. curcas seed oil can be raised from 1.89% to 102.2%, which proved by FTIR and HPLC.

Synthesis and physical properties of estolide ester using saturated Fatty Acid and ricinoleic Acid.

A study was conveyed to produce estolide ester using ricinoleic acid as the backbone. The ricinoleic acid reacted with saturated fatty acid from C8-C18. These reactions were conducted under vacuum at 60°C for 24 h without solvent. The reaction used acid catalyst, sulphuric acid. The new saturate ricinoleic estolide esters show superior low-temperature properties (-52 ± 0.08°C) and high flash point (>300°C). The yield of the neat estolide esters ranged from 52% to 96%. The viscosity range was 51 ± 0.08 to 86 ± 0.01 cp. These new saturated estolide esters were also compared with saturated branched estolide esters.