Spatial distribution and health risks assessment of heavy metals in e-waste dumping sites from Pakistan.

The present study focused on to determine the concentration and health risk of heavy metals (Cu, Pb, Zn, Cd, Hg, Cr) in e-waste contaminated soils collected from different provinces of Pakistan. Further, the impact of heavy metals on soil enzyme activities and microbial community was also investigated. The concentration (mg/kg) of Hg, Zn, Fe, Cu, Pb, Cd, and Cr ranged between 0-0.258, 2.284-6.587, 3.005-40.72, 8.67-36.88, 12.05-35.03, 1.03-2.43, and 33.13-60.05, respectively. The results revealed that Lahore site of Punjab province indicated more concentration of heavy metals as compared to other sites. The level of Cr at all sites whereas Hg at only two sites exceeds the World Health Organization standards (WHO) for soil. Soil enzyme activity exhibited dynamic trend among the sites. Maximum enzyme activity was observed for urease followed by phosphatase and catalase. Contamination factor (Cf), Pollution load index (PLI), and geo-accumulation index (Igeo) results showed that all the sites are highly contaminated with Cu, Cd, and Pb. Hazard index (HI) was less than 1 for children and adults suggesting non-carcinogenic health risk. Principle component analysis results depicted relation among Cr, Fr, catalase, and actinomycetes; Cd, OM, urease, and bacteria, and Pb, Cu, Zn, Hg, and phosphatase, suggesting soil enzymes and microbial community profiles were influenced by e-waste pollution. Therefore, there is a dire need to introduce sustainable e-waste recycling techniques as well as to make stringent e-waste management policies to reduce further environmental contamination.

Parental beliefs, attitudes, and practices on nutrition and children feeding: implications to preventive measures on children's obesity in Saudi Arabia.

OBJECTIVE: Parents have a profound influence on their children's dietary habits. Parents' perspectives, attitudes, and behaviors regarding feeding their children a nutritious diet can have a significant impact on their children's health. The objective of this study was to examine the attitudes, beliefs, and feeding practices of parents in relation to nutrition for their children and to determine how these factors influence strategies for preventing obesity. SUBJECTS AND METHODS: A total of 446 Saudi mothers with children aged 2-12 years were recruited for this study. The Child Feeding Questionnaire (CFQ) was administered to mothers via an instant messaging application. RESULTS: Mothers' age showed a significant difference in perceived responsibility (p < 0.004), perceived parental weight (p = 0.000), perceived child's weight (p = 0.000), and concern about the child's weight (p = 0.000). Mothers with postgraduate degrees exhibited a significant difference in perceived child weight (p < 0.003); occupational status showed a significant difference in perceived parental weight (p < 0.004), perceived child weight (p < 0.001), and residence, particularly in Riyadh, which showed a significant difference in perceived parental weight (p < 0.026). There were also significant differences in body mass index (BMI) (p = 0.000) and perceived parental weight in relation to the mother's age. Mothers' age was significantly related to food restrictions (p = 0.000), pressure to eat (p = 0.000), and monitoring (p < 0.009). Mothers with only one child displayed significance in relation to pressure to eat (p < 0.019), while government-employee mothers showed a significant relationship with food restrictions (p < 0.005). There was a noteworthy association between the age of the mothers and perceived responsibility (p < 0.001), occupation (p < 0.22), residence (p = 0.000), and the mother's BMI (p = 0.000) with perceived parental weight. Finally, occupation (p < 0.006) was found to significantly influence food restriction, while the mother's age was significantly related to the pressure to eat (p < 0.002). CONCLUSIONS: Parental attitudes, practices, and beliefs regarding child feeding were strongly associated with maternal age, occupation, and BMI. Targeted interventions should be developed to assist mothers exhibiting these characteristics in establishing healthier and more effective feeding routines for their children. For example, interventions could be designed to educate parents on the latest findings regarding child-feeding habits and help them develop a greater sense of responsibility for their children's nutrition.

Beyond graphene: exploring the potential of MXene anodes for enhanced lithium-sulfur battery performance.

The high theoretical energy density of Li-S batteries makes them a viable option for energy storage systems in the near future. Considering the challenges associated with sulfur's dielectric properties and the synthesis of soluble polysulfides during Li-S battery cycling, the exceptional ability of MXene materials to overcome these challenges has led to a recent surge in the usage of these materials as anodes in Li-S batteries. The methods for enhancing anode performance in Li-S batteries via the use of MXene interfaces are thoroughly investigated in this study. This study covers a wide range of techniques such as surface functionalization, heteroatom doping, and composite structure design for enhancing MXene interfaces. Examining challenges and potential downsides of MXene-based anodes offers a thorough overview of the current state of the field. This review encompasses recent findings and provides a thorough analysis of advantages and disadvantages of adding MXene interfaces to improve anode performance to assist researchers and practitioners working in this field. This review contributes significantly to ongoing efforts for the development of reliable and effective energy storage solutions for the future.

Unveiling the potential of TPA-based molecules to tune the optoelectronic properties and enhance the efficiency of dye-sensitized solar cells.

CONTEXT: The world's energy and environmental requirements are changing due to rapid population growth and industrial growth, and solar cells can be used to meet these demands. Dye-sensitized solar cells (DSSCs) are solar cells in which energy conversion occurs via a process similar to photosynthesis in plants. DSSC development is still in its infancy. DSSCs can operate under cloudy conditions and indirect sunlight and have attracted considerable attention due to their low cost and high efficiency. We designed two metal-free TPA-based dyes (Dye2 and Dye3) based on the reference dye Mg207 (Dye1) by increasing the donor strength of the molecule, as such dyes have shown enhanced efficiency in DSSCs. Moreover, the triphenylamine (TPA) moiety has been demonstrated to be a good donor that prevents charge recombination. Intramolecular charge transfer (ICT) from the donor to acceptor moiety was found in the sensitizers, and electrons were promoted to the conduction band (CB) of the TiO2 semiconductor. The negative binding energy of the dye@TiO2 clusters indicated that dye adsorption on the semiconductor surface was stable. The double donor increased the electron injection and electronic coupling constants in Dye2 and Dye3, indicating that these newly designed dyes have superior charge injection capacity. Accordingly, the efficiencies of DSSCs with Dye2 and Dye3 were 9.77% and 9.62%, respectively, and substitution with the TPA unit at the -R1 and -R2 positions in Dye1 resulted in better power conversion compared to the parent compound (9.09%). Increased donor strength improved photovoltaic performance by increasing current density and light-harvesting efficiency. This is a good molecular design approach for preparing targeted donor- π -acceptor (D- π -A) organic dyes with high DSSC efficiency. METHODS: To predict the charge transport and optoelectronic characteristics of the TPA dyes, quantum chemical calculations were carried out using Gaussian16. The ground-state (S0) optimized geometries of the sensitizers were computed by utilizing DFT at the B3LYP/6-31G** level. The absorption spectra ( λ max) were computed by employing TD-DFT with various functionals (B3LYP, PBE1PBE, CAM-B3LYP, and BHandHLYP) in the gas and solvent (DCM) phases. Among the studied functionals, BHandHLYP was found to be best at successfully reproducing the experimental data. Thus, the absorption spectra of the newly designed dyes and dye@TiO2 were calculated at the BHandHLYP/6-31G** level. The dye@TiO2 cluster optimizations were carried out at the B3LYP/6-31G**(LANL2DZ) level.

Propeller shaped triarylamine acid: An ultra-sensitive fluorescence probe for distinguishing propanol isomers and water sensing in organic solvents.

The photophysical properties of conformationally flexible (TPA-C) and partially rigidified (Cz-C) triarylamine acids were explored in solid as well as solution state and correlated with the structure. TPA-C and Cz-C exhibited moderate solid-state fluorescence (Φf = 6.2 % (TPA-C) and 5.6 % (Cz-C)) and self-reversible mechanofluorochromism. TPA-C produced fluorescent polymorphs (TPA-C-1 and TPA-C-2) with tunable fluorescence. TPA-C-1 showed unusual carboxylic acid intermolecular interactions whereas TPA-C-2 and Cz-C showed usual carboxylic acid dimer. TPA-C exhibited strong solvent polarity dependent tunable fluorescence (Φf = 0.01 to 0.11 compared to quinine sulphate standard) but Cz-C was non-emissive in the solution state. The dual emissive TPA-C showed highly sensitive fluorescence changes in organic solvents (CH3CN, THF, DMF, EtOH) when trace amount of water was added. In CH3CN, TPA-C showed weak fluorescence at 474 nm and addition of water (1 %) exhibited significant blue shift (λmax = 416 nm). The fluorescence intensity was gradually decreased with blue shifting in DMF, THF and EtOH with water addition. Importantly, TPA-C showed drastically different fluorescence in n-propanol (n-PA) and iso-propanol (IPA). TPA-C in n-PA showed fluorescence at 408 nm that was clearly red shifted to 438 nm with 0.1 % addition of IPA. The limit of detection (LOD) of water in CH3CN, DMF, THF and EtOH by TPA-C revealed 0.02, 0.7, 0.08 and 0.77 %, respectively. The LOD of IPA sensing in n-PA is 0.05 % and indicated the very efficient sensing and distinguishing propanol isomers. Thus, simple triphenylamine acid showed excellent water sensing and propanol isomers discrimination that could be attributed to the twisted intramolecular charge transfer (TICT) formation.

Development and validation of a trauma frailty scale in severely injured patients: the Nottingham Trauma Frailty Index.

Aims: Frailty greatly increases the risk of adverse outcome of trauma in older people. Frailty detection tools appear to be unsuitable for use in traumatically injured older patients. We therefore aimed to develop a method for detecting frailty in older people sustaining trauma using routinely collected clinical data. Methods: We analyzed prospectively collected registry data from 2,108 patients aged ≥ 65 years who were admitted to a single major trauma centre over five years (1 October 2015 to 31 July 2020). We divided the sample equally into two, creating derivation and validation samples. In the derivation sample, we performed univariate analyses followed by multivariate regression, starting with 27 clinical variables in the registry to predict Clinical Frailty Scale (CFS; range 1 to 9) scores. Bland-Altman analyses were performed in the validation cohort to evaluate any biases between the Nottingham Trauma Frailty Index (NTFI) and the CFS. Results: In the derivation cohort, five of the 27 variables were strongly predictive of the CFS (regression coefficient B = 6.383 (95% confidence interval 5.03 to 7.74), p < 0.001): age, Abbreviated Mental Test score, admission haemoglobin concentration (g/l), pre-admission mobility (needs assistance or not), and mechanism of injury (falls from standing height). In the validation cohort, there was strong agreement between the NTFI and the CFS (mean difference 0.02) with no apparent systematic bias. Conclusion: We have developed a clinically applicable tool using easily and routinely measured physiological and functional parameters, which clinicians and researchers can use to guide patient care and to stratify the analysis of quality improvement and research projects.

Vein of Galen aneurysmal malformation associated with brain abscess: A computed tomography case report.

Vein of Galen malformation (VGM) is a rare congenital, uncommon intracerebral vascular anomaly rarely complicated with the development of brain abscess as secondary to primary infection or after endovascular treatment. We report a very rare finding of a vein of Galen aneurysm associated with a large brain abscess at the time of diagnosis. A 12-year-old boy with a high-grade fever, severe headache, and recurrent episodes of convulsions came into the radiology department of Kassala Advanced Diagnostic Center. On a Siemens 16-slice scanner, brain non-contrast enhanced computed tomography (NECT) and contrast enhanced CT (CECT) was used to determine the source of the acute headache and convulsions which revealed a right frontal peripherally enhancing cystic lesion measuring 5.7 × 4.7 × 5.3 cm2 surrounded by massive vasogenic edema causing mass effect with midline shift to the left side by 1.5 cm suggestive of brain abscess. There is evidence of another avidly enhancing lesion seen within the third ventricle continuous with a straight sinus surrounded by extensive vascular loops consistent with an aneurysm of the vein of Galen, it was causing compression of the cerebral aqueduct with upstream mild hydrocephalus with dilated both lateral ventricles. Late presentation, diagnosis, and treatment also lead to an increase in the morbidities and mortalities of such case conditions. Urgent intervention should be considered for better outcomes.

Nano round polycrystalline adsorbent of chicken bones origin for Congo red dye adsorption.

Nano round polycrystalline adsorbent (NRPA) of chicken bones origin was utilize as effective adsorbent in Congo red dye removal via aqueous media. The NRPA adsorbent was prepared via thermal decomposition and its structure was investigated with the aids of Transmission Electron Microscopy, Fourier Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy, Energy Dispersive X-ray Analysis (EDX), and X-ray Diffractometer (XRD). A monophasic apatite phase was confirmed from XRD investigation, while functional groups analysis showed that NRPA possessed CO32-, PO43- and OH- absorption bands. The maximum adsorption capacities derived from Langmuir isotherm is 98.216 mg g-1. From the combined values of n from Freundlich and separation factor (RL) of Langmuir models, the adsorption of CR by NRPA is favourable. Thermodynamic values of 5.280 kJ mol-1 and 16.403 kJ mol-1 K-1 were found for ΔH° and ΔS° respectively. The entire values of ΔG° which ranges from - 35.248 to - 459.68 kJ mol-1 were all negative at different temperatures. Thus, nano polycrystalline adsorbent of chicken bone origin can serve as excellent adsorbent in Congo red dye removal from waste water.

Deep blue emitting dual state fluorescent triphenylamine-dicyclohexylurea derivative: Multi-stimuli responsive fluorescence switching and methanol/water sensing.

A new deep blue emissive organic fluorophore (N-cyclohexyl-N-(cyclohexylcarbamoyl)-4-(diphenylamino)benzamide (NCDPB)) was designed and synthesized, which showed strong fluorescence both in solution and solid-state. Solid-state structural analysis of NCDPB revealed non-planar twisted molecular conformation with extended hydrogen bonding between the amide functionalities. The propeller shaped triphenylamine (TPA) and non-planar cyclohexyl unit prevented close π…π stacking and produced strong deep blue emission in the solid state (λmax = 400 nm, quantum yield (Φf) = 12.6 %). NCDPB also exhibited strong solvent polarity dependent tunable emission in solution (λmax = 402-462 nm, Φf = 1.15 (compared to quinine sulphate)). NCDPB showed reversible fluorescence switching between two fluorescence states upon mechanical crushing and heating/solvent exposure. Mechanical crushing caused red shifting of fluorescence from 400 to 447 nm and heating/solvent exposure reversed the fluorescence. Further, NCDPB also displayed off-on reversible/self-reversible fluorescence switching upon exposure to trifluoracetic acid (TFA) and NH3. The repeated fluorescence switching cycles indicated high reversibility without any significant change of fluorescence intensity. The drastically different fluorescence of NCDPB in CH3OH and EtOH was utilized to distinguish them and monitor CH3OH contamination in ethanol and benzene. It showed limit of detection (LOD) of methanol up to 0.25 % and 7 % in benzene and ethanol, respectively. The water sensitive fluorescence modulation of NCDPB in organic solvents was used to sensing water contamination in common organic solvents. Thus, integration of twisted TPA with H-bonding urea produced dual state emitting organic fluorophore with multi-responsive fluorescence switching and solvent sensing.

Health risk assessment of heavy metals in saffron (Crocus sativus L.) cultivated in domestic wastewater and lake water irrigated soils.

Irrigation of crops with domestic wastewater (DW) is a common practice in developing countries like India. However, domestic wastewater irrigation poses a risk of migration of toxic heavy metals to edible parts of crops, which requires serious measures to prevent their uptake. In this study, the effect of DW irrigation in comparison with Sarbal Lake water (SLW) and borewell water (BW) on soil characteristics and cultivated saffron (Crocus sativus L.) was investigated. For this purpose, samples of water, soil, and saffron (corm, petal, and stigma) were collected from the suburban area of Pampore, Srinagar district, Jammu and Kashmir, India. The results showed that DW irrigation had the maximum significant (p < 0.05) influence on the physico-chemical and nutrient characteristics of the soil, followed by SLW and BW irrigation, respectively. The growth and yield parameters of saffron were also significantly (p < 0.05) increased in the case of DW irrigation as compared to SLW and BW. The quality ranking of the cultivated saffron was found to be in accordance with the ISO standard (III: BW and II: DW and SLW). On the other hand, DW irrigation showed a significant increase in heavy metal contents (mg/kg) of saffron plant parts such as As (0.21-0.40), Cd (0.04-0.09), Cr (0.16-0.41), Cu (7.31-14. 75), Fe (142.38-303.15), Pb (0.18-0.31), Mn (15.26-22.81), Hg (0.18-0.25), Ni (0.74-1.18), Se (0.13-0.22), and Zn (3.44-4.59), followed by SLW and BW. However, the levels of heavy metals did not exceed the FAO/WHO safe limits. Bioaccumulation factor (BAF), dietary intake modeling (DIM<0.006496), health risk assessment (HRI<0.028571), and target hazard quotient (THQ<1) analyses showed no potential health hazard associated with the consumption of saffron irrigated with DW and SLW. Therefore, the results of this study provide valuable insights into the optimization of irrigation sources for saffron cultivation.

In situ fabrication of lanthanum-doped nickel oxide nanostructures using sol-gel for the degradation of rhodamine B.

Nanoscale science represents a thriving field of research for environmental applications within materials science. This study focuses on the fabrication of pure and La-doped nickel oxide (NiO) nanostructures with varying concentrations (1.0, 2.0, 3.0, and 4.0 wt%) of lanthanum using a facile sol-gel technique. This study explores the structural, morphological, chemical composition, and optical characteristics of the resulting pure and La-doped NiO nanostructures. Techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, UV-visible spectroscopy, and photoluminescence (PL) spectroscopy were used for material analysis. The observed trend in the energy band gap (Eg) values demonstrates a continuous decrease up to a La-doping concentration of 3 wt% in NiO. However, after this concentration (at 4.0 wt%), there is a noticeable increase in the energy band gap. At lower La-doping concentrations (up to 3 wt%), the incorporation of La ions into the NiO lattice may result in the formation of defects and oxygen vacancies. The presence of these imperfections may lead to new energy levels into the band gap, resulting in partial filling and a subsequent reduction in the band gap. Beyond a specific doping concentration (e.g., 3 wt%), excess La atoms may aggregate or cluster inside the NiO lattice. This agglomeration may cause structural distortions, strain, and disturbances in the crystal lattice, resulting in an increase in the band gap. The 3 wt% La-doped NiO sample demonstrated a notable 84% degradation efficiency of the synthesized nanomaterials coupled with its inherent stability, highlighting its dual attributes of effective pollutant removal and sustained performance. Furthermore, the cyclic stability of the optimized nanostructure is anticipated to be ∼77.42% after six cycles, suggesting promising future applications in photocatalysis.

Quantum chemical framework for tailoring N/B doped phenalene derivatives to achieve high performance nonlinear optical materials.

Nonlinear optical (NLO) response materials are among the smartest materials of the era and are employed to modulate the phase and frequency of the laser. The present study presents a quantum chemical framework for tailoring nitrogen/boron doped derivatives of Dihydrodibenzo [de,op]pentacene through terminal and central core modifications. The derivatives of these compounds have been designed by introducing various π-conjugated connectors as well as B/N heteroatoms in the phenalene rings. Density functional theory (DFT) methods are used to optimize the ground state molecular geometries of designed compounds, represented as 1 to 4 (phenalene derivatives) and 1-BN to 4-BN (B/N doped phenalene derivatives) at the M06-2X/6-311G* level of theory. The highest value of 116.9 × 10-24 esu and 240.2 × 10-24 esu for isotropic and anisotropic linear polarizability is shown by compound 4. Among the designed compounds, 4-BN has achieved the highest γ amplitude of 1858 × 10-36 esu owing to its unique molecular structural design. Further analysis of electronic parameters, such as electron density difference (EDD) maps, the density of states, electrostatic potentials, transition density matrix (TDM) analysis, and frontier molecular orbitals analysis (FMOs), demonstrated the more effective intramolecular charge transfer (ICT) for the best compounds, resulting in a good NLO response. The compounds were also analyzed for their potential in photovoltaic applications based on factors such as open circuit voltage values determined to be between (0.14 eV and 1.82 eV), and light harvesting efficiency (0.425-0.909).

Evaluation of selected tropical marine microalgal cultures for use in biophotovoltaic platforms.

In this study, the bioelectrical power generation potential of four tropical marine microalgal strains native to Malaysia was investigated using BPV platforms. Chlorella UMACC 258 produced the highest power density (0.108 mW m-2), followed by Halamphora subtropica UMACC 370 (0.090 mW m-2), Synechococcus UMACC 371 (0.065 mW m-2) and Parachlorella UMACC 245 (0.017 mW m-2). The chlorophyll-a (chl-a) content was examined to have a linear positive relationship with the power density (p < 0.05). The photosynthetic performance of strains was studied using the pulse-amplitude modulation (PAM) fluorometer; parameters measured include the following: maximum quantum efficiency (Fv/Fm), alpha (α), maximum relative electron transport rate (rETRmax), photo-adaptive index (Ek) and non-photochemical quenching (NPQ). The Fv/Fm values of all strains, except Synechococcus UMACC 371, ranged between 0.37 and 0.50 during exponential and stationary growth phases, suggesting their general health during those periods. The low Fv/Fm value of Synechococcus UMACC 371 was possibly caused by the presence of background fluorescence from phycobilisomes or phycobiliproteins. Electrochemical studies via cyclic voltammetry (CV) suggest the presence of electrochemically active proteins on the cellular surface of strains on the carbon anode of the BPV platform, while morphological studies via field emission scanning electron microscope (FESEM) imaging verify the biocompatibility of the biofilms on the carbon anode. KEY POINTS: • Maximum power output of 0.108 mW m-2 is recorded by Chlorella UMACC 258 • There is a positive correlation between chl-a content and power output • Proven biocompatibility between biofilms and carbon anode sans exogenous mediators.

Tuning the Magnetic Behavior of Zinc Ferrite via Cobalt Substitution: A Structural Analysis.

Cobalt-doped zinc ferrite is a contemporary material with significant structural and magnetic characteristics. Our study explores the magnetic properties of cobalt-substituted zinc ferrite (ZnxCo1-xFe2O4), synthesized via a simple sol-gel method. By varying the cobalt ratio from 0 to 0.5, we found that zinc substitution impacts both the magnetization and lattice parameters. FTIR analysis suggested the presence of functional groups, particularly depicting an M-O stretching band, within octahedral and tetrahedral clusters. X-ray diffraction analysis confirmed the phase purity and cubic structure. The synthesized materials exhibited an average particle size of 24-75 nm. Scanning electron microscopy revealed the morphological properties, confirming the formation of truncated octahedral particles. In order to determine the stability, mass loss (%), and thermal behavior, a thermal analysis (thermogravimetric analysis (TGA)/differential thermal analysis (DTA)) was performed. The magnetic properties of the synthesized ferrites were confirmed via a vibrating sample magnetometer (VSM). Finally, the highest saturated magnetization and lowest coercivity values were observed with higher concentrations of the cobalt dopant substituting zinc. The synthesized nanomaterials have good stability as compared to other such materials and can be used for magnetization in the near future.

Effects of agro based organic amendments on growth and cadmium uptake in wheat and rice crops irrigated with raw city effluents: Three years field study.

Cadmium (Cd) accumulates in the vegetative tissues of rice and wheat crops, posing a serious threat in the food chain. A long-term field experiment was conducted to investigate the effects of rice husk biochar (RHB), farm manure (FM), press mud (PrM), and poultry manure (PM) on the growth, yield, and economics of wheat and rice crops grown with sewage water. The results showed that RHB increased wheat plant height (27%, 66%, 70%), spike-length (33%, 99%, 56%), straw yield (21%, 51%, 49%), and grain yield (42%, 63%, 65%) in year-1, year-2, and year-3, than respective controls. For rice crop, RHB showed the maximum increase in plant height (64%, 92%, 96%), spike length (55%, 95%, 90%), straw yield (34%, 53%, 55%), and grain yield (46%, 66%, 69%) each year (2019-2021), compared to their respective controls. The Cd immobilization was increased by the application of RHB while other treatments followed FM > PrM > PM > control in each year of wheat and rice crops. For year-1, benefit-cost ratio remained maximum with the application of FM while for the 2nd and 3rd years in sequence, RHB proved more economical than other treatments and consistently produced wheat and rice with lower Cd concentration than FM, PrM, and PM in grains. This long-term experiment suggested that the application of organic amendments consistently increased biomass of rice and wheat and decreased the Cd concentration in tissues. The RHB remained more effective compared with FM, PrM, and PM in terms of yield, low Cd accumulation and economics of rice and wheat crops.

Anxiolytic and antidepressant like effects of Zamzam water in STZ-induced diabetic rats, targeting oxidative stress, neuroinflammation, BDNF/ERK/CREP pathway with modulation of hypothalamo-pituitary-adrenal axis.

Introduction: Recent studies have reported a strong relationship between diabetes and anxiety- and depression-like behaviors; however, there is a lack of information on the underlying pathophysiology. Alkaline Zamzam water (ZW), which is rich in several trace elements, has neuroprotective properties. This study aimed to investigate the anxiolytic and antidepressant effects of ZW against diabetes-induced behavioral changes and shed light on the possible underlying mechanisms. Methods: Forty-eight rats were divided into four experimental groups (n = 12): group I (control group), group II (Zamzam water group), group III (diabetic group), and group IV (diabetic + Zamzam water group). Diabetes was induced by an intraperitoneal injection of 60 mg/kg streptozotocin (STZ). At the end of the experiment, the forced swimming test (FST) was used to assess depression-like effects. The elevated plus maze test (EPMT) and open field test (OFT) were performed to evaluate anxiety-like behavior. Blood levels of the hypothalamic-pituitary-adrenal (HPA) axis were measured, and prefrontal cortex and hippocampal tissue samples were removed for histological, immunohistochemical, ELISA, and Q-PCR analyses. Results: ZW significantly decreased the immobility time in the FST, indicating an antidepressant effect (p < 0.001). Additionally, ZW significantly improved the OFT and open field entry (OFE) percentages in the EPMT, increasing center crossing and decreasing grooming and fecal boli in the OFT. This indicated an anxiolytic-like effect in diabetic rats with histological improvement. Interestingly, ZW significantly increased prefrontal cortical and hippocampal levels of antioxidant enzymes and the Nrf2/HO-1 pathway. It also modulated the HPA axis by increasing cortisol and corticotropin-releasing hormone (CRH) levels, with a decrease in ACTH and an increase in monoamine neurotransmitters. Furthermore, diabetic rats that received ZW showed a decrease in the inflammatory markers TNF-α and GFAP by immunohistochemistry and in the mRNA levels of NFκB, IL-1ß, and IL6. In addition, ZW downregulated the expression of the BDNF/ERK2/CREP pathway. Conclusion: Our results suggested a neuroprotective effect of ZW against diabetes-induced anxiety- and depression-like behaviors and explored the underlying mechanisms. These findings suggest a promising therapeutic strategy for patients with diabetes who experience anxiety and depression.

Impact of Protracted War Crisis on Dental Students: A Comparative Multicountry Cross-sectional Study.

BACKGROUND: The impact of conflict and war crisis on dental students is poorly understood. Given the prolonged conflicts and political instability in the Arabic-speaking countries, it is crucial to investigate the effect of these conditions on dental students. This study aimed to assess the impact of protracted war on dental students by comparing the personal, university, and wider context challenges they face across war-affected and unaffected countries. METHODS: A cross-sectional study was conducted including a convenience sample of dental students from 13 universities in 12 Arabic-speaking countries. Respondents were those at entry and exit points of their undergraduate dental training. A self-administered paper questionnaire collected anonymized data on sociodemographics, and personal, university, and wider context challenges that students were facing. Multivariable Poisson regression analyses were carried out. RESULTS: The overall response rate was 64.8%. The mean age was 21.2 (standard deviation = 2.1) years, with 68% of participants being female. After adjusting for age and sex, dental students in Arabic-speaking countries affected by protracted war crisis were significantly more likely to report wider context challenges compared to their counterparts in unaffected countries (n = 2448; beta = 1.12; 95% confidence interval: 1.10-1.13; P < 0.001). DISCUSSION: Dental students in Arabic-speaking countries affected by protracted war crisis were more likely to suffer from wider context challenges such as difficulties in attendance due to the deterioration of security and lack of flexibility of teaching time to accommodate the different circumstances induced by the war crisis. Supporting dental students in areas affected by protracted war crises is needed and may include developing online dental education programs.

Targeting GABA receptors with chalcone derivative compounds, what is the evidence?

INTRODUCTION: In medicinal chemistry, privileged structures have been frequently exploited as a successful template for drug discovery. Common simple scaffolds like chalcone are present in a wide range of naturally occurring chemicals. Chalcone exhibits extensive biological activity and has drawn attention in this context due to its function in the GABA receptor. Epilepsy and GABA receptors are related. It is a chronic neurological condition that affects globally. AREAS COVERED: Numerous neurological disorders, including anxiety and epilepsy, have been related to GABA, the brain's most prevalent inhibitory neurotransmitter. We go through the role of GABA receptors in anxiety and epilepsy in this review. The structure-activity relationship of chalcone and its derivatives on the GABA receptor is covered in our final section. EXPERT OPINION: GABA is a potential therapeutic target for issues associated with the nervous system. We talk about the potential effects of chalcone as a treatment for epilepsy and anxiety on the GABA receptor. Therefore, thorough research is necessary in this regard; the value of in silico tools in developing and enhancing GABA agonists is significant.

Bioactivity properties of hydroxyapatite/clay nanocomposites.

The need for bioactive and non-toxic biomaterials is on a high demand in tissue engineering applications nowadays. Hydroxyapatite (HAp) is the chief constituent of teeth and bones in mammas. One of the major challenges with the use of HAp in engineering application is its brittleness and to overcome this, it's important to react it with a material that can enhanced it's fragility. To this end, HAp and HAp/clay nanocomposites were developed via wet chemical process to mimic natural HAp and to equally confer special properties such as mechanical properties, high surface area, crystallinity, high porosity, and biocompatibility on the biomaterial. The functional groups properties of the as-prepared nanocomposites analyzed by FT-IR showed that the HAp and clay posed reactive centers such as Al-Al-OH, Si-Si-OH, Si-O, PO43-, -OH, and Si-O-Al. The XRD results confirmed the formation of HAp/clay nanocomposite, while SEM and TEM images showed the morphologies of the prepared nanocomposites to be round shape particles. Besides, EDX result revealed the Ca/P ratio of HAp and HAp-C to be lower than that of stoichiometric ratio (1.67) which implies the presence of K, Na, Ca, Mg, Si and Al in the HAp/clay nanocomposite. The mechanical properties of the apatite were greatly enhanced by the addition of clay. The physiological behaviour of the fabricated apatite composites in saline solution showed steady increase in the values of the saline pH of the various biomolecules until day 5 and became fairly constant at day 7 with pH range of 7.30-7.38. Though the saline solution was acidic at the beginning due to dissolved carbon dioxide, the pH of the saline solution containing the nanocomposites gradually became neutral and fairly alkaline over time as a result of the presence of Lewis basis structures in the composites which helps in neutralizing the acidic solution. Furthermore, proliferation of apatites particles onto the surface of the nanocomposites was observed after treatment with simulated body fluids (SBF) media for 7 days. Thus, HAp/clay nanocomposites can be useful biomaterials in bone tissue engineering.

Novel Insights about Synergistic Effect of Zamzam Water with SGL2 Inhibitors on Wound Healing in STZ-Induced Diabetic Rats: The Role of anti-Inflammatory and Proangiogenic Effects.

Background: Hyperglycemia usually impairs wound healing by dysregulating the inflammatory response and angiogenesis. This study aimed to examine the synergistic effect of dapagliflozin and Zamzam water (ZW) on the healing of diabetic wounds and to explore their anti-inflammatory and proangiogenic effects.Materials and methods: A full-thickness excisional wound was made on the backs of all groups after two weeks of diabetes induction. Forty rats were divided into five groups, with eight rats per group; Group 1: Control non-diabetic rats; Group II: Untreated diabetic rats; Group III: Diabetic rats drinking ZW; Group IV: Diabetic rats receiving an oral dose of 1 mg/kg dapagliflozin; and Group V: Received both dapagliflozin and ZW. The healing of diabetic wounds was assessed by measuring wound closure, oxidative stress markers, immunohistochemical staining of NF-ßB, VEGF, CD34, CD45, Ki-67, and eNOS, gene expression of MMP-9, TGF-ß1, EGF-b1, FGF, and Col1A1, protein levels of TNFα, IL-1ß, IL6, Ang II, and HIF-1α by ELISA assay, and histological examination with H & E and Masson's trichrome. Combined treatment with dapagliflozin and ZW significantly (p < 0.05) enhanced the wound closure and antioxidant enzyme level, with apparent histological improvement, and shortened the inflammatory stage of the diabetic wound by decreasing the level of inflammatory markers NF-κB, TNF-α, IL-1ß, IL6, and CD45. Therefore, it improved angiogenesis markers VEGF, CD34, eNOS, EGF-ß1, FGF, Ang II, and HIF-1α, increasing Ki-67 cellular proliferation. Moreover, it enhanced the remodeling stage by increasing MMP-2, TGF-ß1, and Col1A1 levels compared to diabetic rats.