Current issues and potential solutions for the electrospinning of major polysaccharides and proteins: A review.

Biopolymers, especially polysaccharides and proteins, are the promising green replacement for petroleum based polymers. Due to their innate properties, they are effectively used in biomedical applications, especially tissue engineering, wound healing, and drug delivery. The fibrous morphology of biopolymers is essentially required for the effectiveness in these biomedical applications. Electrospinning (ES) is the most advanced and robust method to fabricate nanofibers (NFs) and provides a complete solution to the conventional methods issues. However, the major issues regarding fabricating polysaccharides and protein nanofibers using ES include poor electrospinnability, lack of desired fundamental properties for a specific application by a single biopolymer, and insolubility among common solvents. The current review provides the main strategies for effective electrospinning of the major biopolymers. The key strategies include blending major biopolymers with suitable biopolymers and optimizing the solvent system. A systematic literature review was done to provide the optimized solvent system of the major biopolymers along with their best possible biopolymeric blend for ES. The review also highlights the fundamental issues with the commercialization of ES based biomedical products and provides future directions to improve the fabrication of biopolymeric nanofibers.

Effects of cadmium acetate contaminated drinking water on vital organs: A histopathological and biochemical study.

Cadmium (Cd) is a heavy metal with various human exposure sources. It accumulates in the liver, forming a complex with metallothionein protein and progresses to other organs. As a heavy metal, cadmium can replace calcium and other divalent ions and disturb their cascades, ultimately affecting the vital organs. Since cadmium acetate (CA) is considered more lethal than other Cd compounds, the current study examines the effect of different concentrations of CA doses in drinking water for different exposure times in murine models (Mus musculus). After the exposure period, the murine models were then examined histopathologically and biochemically. The histopathological examination of the heart, liver, and kidneys of the experimental group showed extensive degenerative effects. Atomic absorption spectroscopy was used to determine the quantity of cadmium in serum, kidney, and hepatic tissues. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of hepatic proteins, especially metallothionein, directly related to Cd administration. The biochemical parameters, including creatine kinase, alanine aminotransferase, aspartate aminotransferase, total proteins, glucose, urea, uric acid, and creatinine, were also analyzed. After thorough histochemical and biochemical analysis, it was concluded that even low dose exposure of CA is hazardous to murine models with damaging effects.

Characteristics of algal-bacterial aerobic granular sludge treating real wastewater: Effects of algal inoculation and alginate-like exopolymers recovery.

Limited information is available on the characteristics of algal-bacterial aerobic granular sludge (AGS) treating real wastewater, especially on its alginate-like exopolymers (ALE) production. In addition, the effect of target microalgae species inoculation on the system performance has not been fully understood. This study aimed to reveal the effect of microalgae inoculation on the characteristics of algal-bacterial AGS and its ALE production potential. Two photo-sequencing batch reactors (PSBR) were employed, namely R1 with activated sludge and R2 with Tetradesmus sp. and activated sludge being inoculated, respectively. Both reactors were fed with locally sourced municipal wastewater and operated for 90 days. Algal-bacterial AGS were successfully cultivated in both reactors. No significant difference was observed between the performances of R1 and R2, reflecting that the inoculation of target microalgae species may not be crucial for the development of algal-bacterial AGS when treating real wastewater. Both reactors achieved an ALE yield of about 70 mg/g of volatile suspended solids (VSS), indicating that a substantial amount of biopolymer can be recovered from wastewater. Interestingly, boron was detected in all the ALE samples, which might contribute to granulation and interspecies quorum sensing. The enrichment of lipids content in ALE from algal-bacterial AGS treating real wastewater reveals its high resource recovery potential. Overall, the algal-bacterial AGS system is a promising biotechnology for simultaneous municipal wastewater treatment and resource (like ALE) recovery.

Micro and macro analysis of restaurant wastewater containing fat, oil, grease (FOG): An approach based on prevention, control, and sustainable management.

The number of restaurants is increasing day by day in almost all the developing countries, causing the increase in the generation of restaurant wastewater. Various activities (i.e., cleaning, washing, and cooking) going on in the restaurant kitchen lead to restaurant wastewater (RWW). RWW has high concentrations of chemical oxygen demand (COD), biochemical oxygen demand (BOD), nutrients such as potassium, phosphorus, and nitrogen, and solids. RWW also contains fats, oil, and grease (FOG) in alarmingly high concentration, which after congealing can constrict the sewer lines, leading to blockages, backups, and sanitatry sewer overflows (SSOs). The paper provides an insight to the details of RWW containing FOG collected from a gravity grease interceptor at a specific site in Malaysia, and its expected consequences and the sustainable management plan as prevention, control, and mitigation (PCM) approach. The results showed that the concentrations of pollutants are very high as compared to the discharge standards given by Department of Environment, Malaysia. Maximum values for COD, BOD and FOG in the restaurant wastewater samples were found to be 9948, 3170, and 1640 mg/l, respectively. FAME and FESEM analysis are done on the RWW containing FOG. In the FOG, palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1n9c), linoleic acid (C18:2n6c) are the dominant lipid acids with a maximum of 41, 8.4, 43.2, and 11.5%, respectively. FESEM analysis showed formation of whitish layers fprmed due to the deposition of calcium salts. Furthermore, a novel design of indoor hydromechanical grease interceptor (HGI) was proposed in the study based on the Malaysian conditions of restaurant. The HGI was designed for a maximum flow rate of 132 L per minute and a maximum FOG capacity of 60 kg.

Algal-bacterial aerobic granular sludge for real municipal wastewater treatment: Performance, microbial community change and feasibility of lipid recovery.

Despite various research works on algal-bacterial aerobic granular sludge for wastewater treatment and resource recovery processes, limited information is available on its application in real wastewater treatment in terms of performance, microbial community variation and resource recovery. This study investigated the performance of algal-bacterial aerobic granular sludge on real low-strength wastewater treatment in addition to the characterization of microbial community and fatty acid compositions for biodiesel production. The results demonstrated 71% COD, 77% NH4+-N and 31% phosphate removal efficiencies, respectively. In addition, all the water parameters successfully met the effluent standard A, imposed by the Department of Environment (DOE) Malaysia. Core microbiome analyses revealed important microbial groups (i.e., Haliangium ochraceum, Burkholderiales and Chitinophagaceae) in bacterial community. Meanwhile the photosynthetic microorganisms, such as Oxyphotobacteria and Trebouxiophyceae dominated the algal-bacterial aerobic granular sludge, suggesting their important roles in granulation and wastewater treatment. Up to 12.51 mg/gSS lipid content was recovered from the granules. In addition, fatty acids composition showed high percetages of C16:0 and C18:0, demonstrating high feasibility to be used for biodiesel production application indicated by the cetane number, iodine value and oxidation stability properties.

Dosimetry audit for megavoltage photon beams applied in non-reference conditions.

PURPOSE: We have conducted for the first time a Malaysian postal dosimetry audit of external beam under non-reference conditions by evaluating the output performance while screening for systematic errors within the dosimetry chain. The potential use from the choice of detector were investigated along with the search for other sources of discrepancies. METHODS: Ten radiotherapy centres were audited, encompassing 16 megavoltage photon beam arrangements, adopting the IAEA postal dosimetry protocol for non-reference conditions, with a holder modified to accommodate three TLD types: Ge-doped cylindrical silica fibres (CF), Ge-doped flat silica fibres (FF), and TLD-100 powder. RESULTS: Eight of the centres operated within ± 5% of stated dose, one other exceeding tolerance for all measured points, and one did not return any dosimeters for analysis after failing the initial irradiations. Post remedial measures, the mean relative response for CF, FF, and TLD-100 was 1.00, 0.99, and 0.98 respectively, with associated coefficients of variation 6.87%, 6.45%, and 5.06%. CONCLUSION: High quality radiotherapy clinical practice postal dosimetry audits that are based on sensitive TLDs are seen to be particularly effective in identifying and resolving dose delivery discrepancies.

The role of restaurant wastewater for producing bioenergy towards a circular bioeconomy: A review on composition, environmental impacts, and sustainable integrated management.

Population inflation has led to the unprecedented increase in urbanization, thus causing negative impacts on environmental sustainability. Recently, there is an upsurge in the number of restaurants due to the changing lifestyles of the people round the globe. For instance, there were 167,490 food and beverage establishments in 2015, representing an annual growth rate of 5.1% since 2010 in Malaysia. The rapid growth of restaurants has implicated a negative impact due to the generation of highly polluted restaurant wastewater (RWW). RWW is mainly generated during the cooking, washing, and cleaning operations. RWW typically contain fat, oil, and grease (FOG) resulting from residues of meat, deep-fried food, baked items and butter, and has caused serious blockages of sewer due to clogging and eventually sewage backup. This has increased the required frequency of cleaning and sanitary sewer overflows (SSOs). Results from the previous studies have shown that FOG can be treated using physical, chemical, and biological processes. Different technologies have been applied for the treatment of FOG and other pollutants (COD, BOD, SS and NH4-N) present in RWW. Therefore, this review aims to provide an in-depth understanding of the characteristics of RWW, chemical and physical characteristics of FOG with the mechanism of its formation and utilization for biocomposites, biogas and biodiesel productions for circular bioeconomy. Besides, this review has discussed the potential treatment technologies comprehensively for RWW which is currently remain understudied. Integrated sustainable management of FOG with technoeconomic analysis of bioproducts, sustainable management with international initiatives and previous studies are also summarized. Hence, this review aims towards providing better alternatives in managing RWW at sources, including its treatment and potential of its biorefinery, therefore eventually contributing towards environmental sustainability.

Future trends and patterns in leachate biological treatment research from a bibliometric perspective.

Leachate has become a great deal of concern due to its complex properties which are primarily caused by the high concentrations of organics and ammonia. Thus, proper leachate treatment is required prior to its discharge. Leachate can be treated in various ways, and biological treatment is one of the approaches. This treatment has been shown to be both effective and cost-efficient while offering the possibility of resource recovery in the form of bioenergy. In this study, the underlying patterns in publications related to leachate biological treatment were uncovered through bibliometric analysis. This study also lays the groundwork for a deeper understanding of the past, current, and future trends of the leachate biological treatment. Research publications from 1974 to 2021 were retrieved from the Scopus database, and it was identified that 2013 articles were published in the span of 47 years. From the analyzed publications, China played a leading role in publishing leachate biological treatment research articles as well as having the most productive institutions and authors. Meanwhile, the USA was found to be the most active country in initiating international collaborations with 33 countries. The research hotspots were also successfully identified using keyword co-occurrences analysis. Anaerobic digestion and constructed wetland were revealed to be the research hotspots. The critical role of biological treatment in removing nitrogen from leachate was also highlighted. Besides, numerous research gaps were identified in the application of aerobic granular sludge (AGS) for leachate treatment. This can be a potential area for research in the future. Finally, future research should be encouraged to focus on the use of sustainable treatment systems in which energy recovery in the form of biogases is promoted.

The selectivity of electron acceptors for the removal of caffeine, gliclazide, and prazosin in an up-flow anaerobic sludge blanket (UASB) reactor.

This study attempts to investigate the relationship between the dominance of reducing conditions and the biotransformation of pharmaceutical compounds, which has been scarcely reported in a continuous anaerobic treatment process. Previous batch experiments have discovered the possible implications of different reducing conditions on the biotransformation process, but have failed to reflect actual removal performance due to substrate limitations and other operational factors. Continuously operating reactors commonly receive wastewater stream containing a wide range of electron acceptors that diversify the growth of microorganisms in anaerobic treatment. The alteration of the dominance of reducing conditions in a continuous anaerobic reactor may result in the improvement of biotransformation performance compared to a single reducing condition in a substrate-limited batch experiment. The removal of psychostimulant caffeine (CAF), anti-diabetic drug gliclazide (GCZ), and anti-hypertensive drug prazosin (PRZ) were examined through the operation of an up-flow anaerobic sludge blanket (UASB) reactor under predominant methanogenic condition (Phase I) and simultaneous reducing conditions provided by a nitrate supplement (Phase II). The results revealed high biotransformation performance for all three compounds (73-> 99%) in both Phase I and Phase II experiments and fitted the pseudo-first-order model. The biotransformation rate of CAF and PRZ were relatively lower by 25% and 29%, while the GCZ rate improvement doubled in Phase II compared to Phase I. The outcome from 16s rRNA sequencing suggested that the biotransformation of the compounds may be driven by Firmicutes and Bacteroidota in both phases, and Burkhorderiales and sulfate-reducing bacteria species in Phase II. This study proved preferential of reducing conditions does not negatively affect the biotransformation performance of each pharmaceutical compound in a continuous anaerobic reactor, but they led to varying biotransformation rate, hence shifting the microbial diversity.

Discovering future research trends of aerobic granular sludge using bibliometric approach.

The advantageous characteristics of aerobic granular sludge (AGS) have led to their increasing popularities among academics and industrial players. However, there has been no bibliometric report on current and future research trends of AGS. This study utilized the available reports of AGS in the Scopus database for comprehensive bibliometric analyses using VOSviewer software. A total of 1203 research articles from 1997 to 2020 were analyzed. The dominance of the Netherlands and China were revealed by the high number of publications and citations. Nevertheless, the Netherlands exhibited higher average citation per article at 76.4. A recent process of AGS involving biochar and algal addition were also identified. Meanwhile, the application of AGS for antibiotic containing wastewater as well as possibility of resource recovery were recently reported and was expected to expand in the future. It was suggested that application of AGS would develop further along with the development of sustainable wastewater treatment process.

Review on the Antibacterial Mechanism of Plant-Derived Compounds against Multidrug-Resistant Bacteria (MDR).

Microbial resistance has progressed rapidly and is becoming the leading cause of death globally. The spread of antibiotic-resistant microorganisms has been a significant threat to the successful therapy against microbial infections. Scientists have become more concerned about the possibility of a return to the pre-antibiotic era. Thus, searching for alternatives to fight microorganisms has become a necessity. Some bacteria are naturally resistant to antibiotics, while others acquire resistance mainly by the misuse of antibiotics and the emergence of new resistant variants through mutation. Since ancient times, plants represent the leading source of drugs and alternative medicine for fighting against diseases. Plants are rich sources of valuable secondary metabolites, such as alkaloids, quinones, tannins, terpenoids, flavonoids, and polyphenols. Many studies focus on plant secondary metabolites as a potential source for antibiotic discovery. They have the required structural properties and can act by different mechanisms. This review analyses the antibiotic resistance strategies produced by multidrug-resistant bacteria and explores the phytochemicals from different classes with documented antimicrobial action against resistant bacteria, either alone or in combination with traditional antibiotics.

Producing desulfurized biogas using two-stage domesticated shear-loop anaerobic contact stabilization system.

In this study, a two-stage domesticated shear-loop anaerobic contact stabilization (SLACS) system is introduced as a new reactor design to enhance methane productivity with significant reduction in hydrogen sulphide (H2S) synthesis. Due to the rich sulfate content in industrial wastewaters, the initial fermentation phase of anaerobic digestion is highly acidifying and often leads to severe performance losses, digester's instability, and even culture crash. The SLACS system functions as a dissimilatory sulfate reduction - methanogenic reactor consisting of two compartments, a shear-loop anaerobic bed (SLAB) unit and an anaerobic plug flow (APF) unit. The functional role of the SLAB unit is not limited to acidogenesis but also sulfidogenic processes, which curtails H2S generation in the APF unit (methanogenic stage). Experimental observations indicated that pH serves a critical role in the cohabitation of acidogenic and sulfidogenic microbes in the SLAB unit. Although acidogenesis was not influenced by pH within the range of 4.5-6.0, it is vital to stabilize the pH of this unit at 5.4 to establish a steady sulfate reduction of above 75%. The highest desulfurization achieved in this compartment was 88% under a hydraulic retention time (HRT) of 4 h. With an average methane productivity of 256 mL g-1 VS, the methanogenic performance of the two-stage domesticated SLACS system shows a 32% methanogenic proficiency higher than that of the one-stage digestion system. Microbial community structure within the system carried out via Next Generation Sequencing (NGS) provided qualitative data on the sludge's sulfidogenic and methanogenic performance.

Assessing the treatment of acetaminophen-contaminated brewery wastewater by an anaerobic packed-bed reactor.

The treatment of high-strength organic brewery wastewater with added acetaminophen (AAP) by an anaerobic digester was investigated. An anaerobic packed-bed reactor (APBR) was operated as a continuous process with an organic loading rate of 1.5-g COD per litre per day and a hydraulic retention time of three days. The results of steady-state analysis showed that the greatest APBR performances for removing COD and TOC were as high as 98 and 93%, respectively, even though the anaerobic digestibility after adding the different AAP concentrations of 5, 10 and 15 mg L(-1) into brewery wastewater can affect the efficiency of organic matter removal. The average CH4 production decreased from 81 to 72% is counterbalanced by the increased CO2 production from 11 to 20% before and after the injection of AAP, respectively. The empirical kinetic models for substrate utilisation and CH4 production were used to predict that, under unfavourable conditions, the performance of the APBR treatment process is able to remove COD with an efficiency of only 6.8%.

A proposed aerobic granules size development scheme for aerobic granulation process.

Aerobic granulation is increasingly used in wastewater treatment due to its unique physical properties and microbial functionalities. Granule size defines the physical properties of granules based on biomass accumulation. This study aims to determine the profile of size development under two physicochemical conditions. Two identical bioreactors namely Rnp and Rp were operated under non-phototrophic and phototrophic conditions, respectively. An illustrative scheme was developed to comprehend the mechanism of size development that delineates the granular size throughout the granulation. Observations on granules' size variation have shown that activated sludge revolutionised into the form of aerobic granules through the increase of biomass concentration in bioreactors which also determined the changes of granule size. Both reactors demonstrated that size transformed in a similar trend when tested with and without illumination. Thus, different types of aerobic granules may increase in size in the same way as recommended in the aerobic granule size development scheme.

Evaluation of strong cation-exchange polymers for the determination of drugs by solid-phase extraction-liquid chromatography-tandem mass spectrometry.

This paper presents eight distinct strong cation-exchange resins, all of which were derived from precursor resins that had been synthesised using either precipitation polymerisation or non-aqueous dispersion polymerisation. The precursor resins were transformed into the corresponding strong cation-exchange resins by hypercrosslinking followed by polymer analogous reactions, to yield materials with high specific surface areas and strong cation-exchange character. These novel resins were then evaluated as strong cation-exchange (SCX) sorbents in the solid-phase extraction (SPE) of a group of drugs from aqueous samples. Following preliminary experiments, the two best-performing resins were then evaluated in solid-phase extraction-liquid chromatography-tandem mass spectrometry (SPE/LC-MS/MS) to determine a group of drugs from sewage samples. In general, use of these sorbents led to excellent recovery values (75-100%) for most of the target drugs and negligible matrix effects (ME) (<20% ion suppression/enhancement of the analyte signal), when 50mL and 25mL of effluent and influent sewage water samples, respectively, were percolated through the resins. Finally, a validated method based on SPE/LC-MS/MS was used to quantify the target drugs present in different sewage samples.

Influence of palm oil mill effluent as inoculum on anaerobic digestion of cattle manure for biogas production.

Anaerobic digestion for palm oil mill effluent (POME) is widely known for its potential in biogass production. In this study, the potential of using cattle manure for biogas production in complete mix anaerobic bioreactor was investigated using POME at unregulated pH and temperature. Two identical bioreactors were used in this study; namely R1 and R2 fed with cattle manure without and with POME as inoculum, respectively. Both bioreactors were allowed for five days to run in batch mode followed by semi continuous operations at HRT of 20 days. R2 produced 41% methane content compared to 18% produced in R1. A better COD percentage reduction of 45% was found in R2 which was operated with POME as inoculum compared to R1 with 35%. These results indicated that POME as inoculum has an influence on the start-up time and the rate of biogas produced.This findings will help in waste reduction.

Effect of Mecoprop (RS)-MCPP on the biological treatment of synthetic wastewater in an anaerobic membrane bioreactor.

The effects of Mecoprop (RS)-MCPP were investigated in an anaerobic membrane bioreactor (AnMBr) fed with synthetic wastewater containing stepwise increases in Mecoprop concentration, 5-200 mg L(-1) over 240 days. Effects were observed in terms of soluble chemical oxygen demand (COD) removal efficiency, volatile fatty acid (VFA) production, and methane yield. Soluble COD removal efficiency was stable at Mecoprop concentrations below 200 (±3) mg L(-1), with an average of 98 (±0.7)% removal. However, at 200 (±3) mg L(-1) Mecoprop, the COD removal efficiency decreased gradually to 94 (±1.5)%. At 5 mg L(-1) Mecoprop, acetic and propionic acid concentrations increased by 60% and 160%, respectively. In contrast, when Mecoprop was increased to 200 (±3) mg L(-1), the formation and degradation of acetate was unaffected by the higher Mecoprop concentration, acetate remaining below 35 mg L(-1). Increases in the Mecoprop specific utilization rate were observed as Mecoprop was increased stepwise between 5 and 200 mg L(-1).

Characterization of aerobic granular sludge treating high strength agro-based wastewater at different volumetric loadings.

Understanding the relationship between microbial community and mechanism of aerobic granulation could enable wider applications of granules for high-strength wastewater treatment. The majority of granulation studies principally determine the engineering aspects of granules formation with little emphasis on the microbial diversity. In this study, three identical reactors namely R1, R2 and R3 were operated using POME at volumetric loadings of 1.5, 2.5 and 3.5 kg COD m(-3) d(-1), respectively. Aeration was provided at a volumetric flow rate of 2.5 cms(-1). Aerobic granules were successfully developed in R2 and R3 while bioflocs dominated R1 until the end of experiments. Fractal dimension (D(f)) averaged at 1.90 suggesting good compactness of granules. The PCR-DGGE results indicated microbial evolutionary shift throughout granulation despite different operating OLRs based on decreased Raup and Crick similarity indices upon mature granule formation. The characteristics of aerobic granules treating high strength agro-based wastewater are determined at different volumetric loadings.

Aerobic granular sludge formation for high strength agro-based wastewater treatment.

The present study investigates the formation of aerobic granular sludge in sequencing batch reactor (SBR) fed with palm oil mill effluent (POME). Stable granules were observed in the reactor with diameters between 2.0 and 4.0mm at a chemical oxygen demand (COD) loading rate of 2.5 kg COD m(-3) d(-1). The biomass concentration was 7600 mg L(-1) while the sludge volume index (SVI) was 31.3 mL g SS(-1) indicating good biomass accumulation in the reactor and good settling properties of granular sludge, respectively. COD and ammonia removals were achieved at a maximum of 91.1% and 97.6%, respectively while color removal averaged at only 38%. This study provides insights on the development and the capabilities of aerobic granular sludge in POME treatment.