[(R)-2,2-Bis(diphenyl-phosphan-yl)-1,1'-binaphthyl-κ(2) P,P']{2-[(2R)-1,2-diamino-1-(4-meth-oxy-phen-yl)-3-methyl-but-yl]-5-meth-oxy-phenyl-κC (1)}hydrido-ruthenium(II) benzene monosolvate.

In the title complex, [Ru(C19H25N2O2)H(C44H32P2)]·C6H6, the Ru(II) ion is in a distorted octa-hedral coordination environment with the hydride H atom trans to the tertiary carbinamine N atom, giving an H-Ru-N angle of 160.8 (12)°. The equatorial sites are occupied by two P atoms, the secondary carbinamine N atom and a coordinated C atom.

Synthesis of chiral aminophosphines from chiral aminoalcohols via cyclic sulfamidates.

Protic aminophosphines with multiple chiral centers were synthesized in good yields and high purity by the nucleophilic ring-opening of N-protected cyclic sulfamidates with metal phosphides, followed by hydrolysis and deprotection. This synthetic approach is clean, scalable, and high yielding. The method provides an efficient alternative route for the synthesis of chiral aminophosphines.

Aminophosphine ligands R(2)P(CH(2))(n)NH(2) and ruthenium hydrogenation catalysts RuCl(2)(R(2)P(CH(2))(n)NH(2))(2).

The aminophosphine ligands R(2)P(CH(2))(2)NH(2) and R(2)P(CH(2))(3)NH(2) (R = Ph, (i)Pr, (t)Bu) were isolated in good to excellent yields from the reaction of LiPR(2) with Cl(CH(2))(2)N(TMS)(2) and Cl(CH(2))(3)N(TMS)(2), respectively, followed by hydrolysis. This approach allows fine tuning of the ligands' stereoelectronic properties through the variation of the substituents on the phosphine. The aminophosphine ligands were used to prepare the ruthenium complexes RuCl(2)(R(2)P(CH(2))(2)NH(2))(2) and RuCl(2)(R(2)P(CH(2))(3)NH(2))(2) by reacting a 2:1 mixture of the respective ligand and [RuCl(2)(cod)](n) in an appropriate solvent. The resulting complexes were found to be excellent catalysts for the hydrogenation of ketones and imines.

Highly active iridium catalysts for the hydrogenation of ketones and aldehydes.

The pressure hydrogenation capabilities of the iridium pincer complexes IrH2Cl[((i)Pr2PC2H4)2NH] (1) and IrH3[((i)Pr2PC2H4)2NH] (2) are described and compared to related results obtained previously in transfer hydrogenation. Complex 1 was shown to act as a convenient air-stable entry point to the active catalyst 2, in the presence of base and hydrogen gas. The catalysts are active in a range of solvents, including CH2Cl2 and CHCl3, in contrast to related ruthenium systems. This class of iridium complexes is very effective for the direct hydrogenation of a wide range of carbonyl compounds including ketones, diketones, alpha,beta-unsaturated ketones and aldehydes. A catalytic cycle is proposed for this system which involves an ionic heterolytic bifunctional hydrogenation mechanism.

Carbene vs olefin products of C-H activation on ruthenium via competing alpha- and beta-H elimination.

Bulky pincer complexes of ruthenium are capable of C-H activation and H-elimination from the pincer ligand backbone to produce mixtures of olefin and carbene products. To characterize the products and determine the mechanisms of the C-H cleavage, reactions of [RuCl(2)(p-cymene)](2) with N,N'-bis(di-tert-butylphosphino)-1,3-diaminopropane (L1) and 1,3-bis(di-tert-butylphosphinomethyl)cyclohexane (L2) were studied using a combination of X-ray crystallography, NMR spectroscopy, and DFT computational techniques. The reaction of L1 afforded a mixture of an alkylidene, a Fischer carbene, and two olefin isomers of the 16-e monohydride RuHCl[(t)Bu(2)PNHC(3)H(4)NHPBu(t)(2)] (2), whereas the reaction of L2 gave two olefin and two alkylidene isomers of 16-e RuHCl[2,6-(CH(2)PBu(t)(2))(2)C(6)H(8)] (3), all resulting from dehydrogenations of the ligand backbone of L1 and L2. The key intermediates implicated in the C-H activation reactions were identified as 14-electron paramagnetic species RuCl(PCP), where PCP = cyclometalated L1 or L2. Thus the alpha- and beta-H elimination reactions of RuCl(PCP) involved spin change and were formally spin-forbidden. Hydrogenation of 2 and 3 afforded 16-electron dihydrides RuH(2)Cl(PCP) distinguished by a large quantum exchange coupling between the hydrides.

Chemistry of ruthenium(II) monohydride and dihydride complexes containing pyridyl donor ligands including catalytic ketone H2-hydrogenation.

In this study we determine the changes to the properties of dihydride catalysts for ketone H2-hydrogenation by successively replacing the amine donors in the known dach complex RuH2(PPh3)2(dach) (2a), dach = 1,2-(R,R)-diaminocyclohexane, with one pyridyl group in the corresponding 2-(aminomethyl)pyridine (ampy) complexes RuH2(PPh3)2(ampy) (2b) and with two pyridyl groups in the complexes RuH2(PPh3)2(bipy) (2c) and RuH2(PPh3)2(phen) (2d). The ruthenium monohydride complex, (OC-6-54)-RuHCl(PPh3)2(ampy), (1b with Cl trans to H) was prepared by the addition of 1 equiv of ampy to RuHCl(PPh3)3 in THF. Treatment of the monohydride complex with K[BH(sec-Bu)3] in THF or KOtBu/H2 in toluene resulted in the formation of a mixture of at least two isomers of the highly reactive, air-sensitive ruthenium dihydride complex 2b. One is the cis dihydride (OC-6-14)-2b or more simply c,t-2b with trans PPh3 groups and another is the cis dihydride c,c-2b (OC-6-42) that has PPh3 trans to H and PPh3 trans to N(pyridyl). The isomer c,c-2b slowly converts to c,t-2b in solution. The reaction of 1b with KOtBu under Ar results in the formation of a mixture that includes a complex with an imino ligand HN=CH-2-py while the same reaction under H2 leads to c,c-2b and then c,t-2b. The dach complex c,t-2a, reacts with ampy, 2,2'-bipyridine (bipy), and 1,10-phenanthroline (phen) in refluxing THF to form the substituted cis-dihydride complexes c,t-2b, (OC-6-13)-RuH2(PPh3)2(bipy) (c,t-2c with trans PPh3 groups) and (OC-6-13)-RuH2(PPh3)2(phen), c,t-2d, respectively. The dihydrides containing amino groups and cis-PPh3 groups, i.e., c,c-2a or c,c-2b, are active precatalysts for the H2-hydrogenation of acetophenone (neat or in benzene) under mild reaction conditions, whereas those with trans-PPh3 groups, c,t-2a and c,t-2b are much less active. The combination of ampy complex 1b and KOtBu also provides a catalyst in benzene that is more active than the corresponding dach system. The complexes without amino groups c,t-2c and c,t-2d are air-stable and inactive as hydrogenation catalysts under comparable conditions. The mechanism of hydrogenation of ketones catalyzed by isomers of 2a,b is thought to be similar and to proceed via a trans-dihydride complex, t,c-2a or t,c-2b, and an amido complex, neither of which are directly observed for the ampy complexes. The dihydride complex c,t-2b reacts with formic acid to give (OC-6-45)-RuH(OCHO)(PPh3)2(ampy), 3b, with formate trans to hydride. The structures of 1b, c,t-2b, c,t-2c, and 3b have been determined by single-crystal X-ray diffraction.

A succession of isomers of ruthenium dihydride complexes. Which one is the ketone hydrogenation catalyst?

Reaction of RuHCl(PPh(3))(2)(diamine) (1a, diamine = (R,R)-1,2-diaminocyclohexane, (R,R)-dach; 1b, diamine = ethylenediamine, en) with KO(t)Bu in benzene quickly generates solutions of the amido-amine complexes RuH(PPh(3))(2)(NHC(6)H(10)NH(2)), (2a'), and RuH(PPh(3))(2)(NHCH(2)CH(2)NH(2)), (2b'), respectively. These solutions react with dihydrogen to first produce the trans-dihydrides (OC-6-22)-Ru(H)(2)(PPh(3))(2)(diamine) (t,c-3a, t,c-3b). Cold solutions (-20 degrees C) containing trans-dihydride t,c-3a react with acetophenone under Ar to give (S)-1-phenylethanol (63% ee). Complexes t,c-3 have lifetimes of less than 10 min at 20 degrees and then isomerize to the cis-dihydride, cis-bisphosphine isomers (OC-6-32)-Ru(H)(2)(PPh(3))(2)(diamine) (Delta/Lambda-c,c-3a, c,c-3b). A solution containing mainly Delta/Lambda-c,c-3a reacts with acetophenone under Ar to give (S)-1-phenylethanol in 20% ee, whereas it is an active precatalyst for its hydrogenation under 5 atm H(2) to give 1-phenylethanol with an ee of 50-60%. Complexes c,c-3 isomerize to the cis-dihydride, trans-bisphosphine complexes (OC-6-13)-Ru(H)(2)(PPh(3))(2)(diamine) (c,t-3a, c,t-3b) with half-lives of 40 min and 1 h, respectively. A mixture of Delta/Lambda-c,c-3a and c,t-3a can also be obtained by reaction of 1a with KBH(Bu(sec))(3). A solution of complex c,t-3a in benzene under Ar reacts very slowly with acetophenone. These results indicate that the trans-dihydrides t,c-3a or t,c-3b along with the corresponding amido-amine complexes 2a' or 2b' are the active hydrogenation catalysts in benzene, while the cis-dihydrides c,c-3a or c,c-3b serve as precatalysts. The complexes RuCl(2)(PPh(3))(2)((R,R)-dach) or 1a, when activated by KO(t)Bu, are also sources of the active catalysts. A study of the kinetics of the hydrogenation of acetophenone in benzene catalyzed by 3a indicates a rate law: rate = k[c,c-3a](initial)[H(2)] with k = 7.5 M(-1) s(-1). The turnover-limiting step appears to be the reaction of 2a' with dihydrogen as it is for RuH(NHCMe(2)CMe(2)NH(2))(PPh(3))(2) (2c'). The catalysts are more active in 2-propanol, even without added base, and the kinetic behavior is complicated. The basic cis-dihydride c,t-3a reacts with [NEt(3)H]BPh(4) to produce the dihydrogen complex (OC-14)-[Ru(eta(2)-H(2))(H)(PPh(3))(2)((R,R)-dach)]BPh(4) (4) and with diphenylphosphinic acid to give the complex RuH(O(2)PPh(2))(PPh(3))(2)((R,R)-dach) (5). The structure of 5 models aspects of the transition state structure for the ketone hydrogenation step. Complex 2b' decomposes rapidly under Ar to give dihydrides 3b along with a dinuclear complex (PPh(3))(2)HRu(mu-eta(2);eta(4)-NHCHCHNH)RuH(PPh(3))(2) (6) containing a rare, bridging 1,4-diazabutadiene group. The formation of an imine by beta-hydride elimination from the amido-amine ligand of 2a' under Ar might explain some loss of enantioselectivity of the catalyst. The structures of complexes 1a, 5, and 6 have been determined by single-crystal X-ray diffraction.

Hydrogenation versus transfer hydrogenation of ketones: two established ruthenium systems catalyze both.

The established standard ketone hydrogenation (abbreviated HY herein) precatalyst [Ru(Cl)(2)((S)-tolbinap)[(S,S)-dpen]] ((S),(S,S)-1) has turned out also to be a precatalyst for ketone transfer hydrogenation (abbreviated TRHY herein) as tested on the substrate acetophenone (3) in iPrOH under standard conditions (45 degrees C, 45 bar H(2) or Ar at atmospheric pressure). HY works at a substrate catalyst ratio (s:c) of up to 10(6) and TRHY at s:c<10(4). Both produce (R)-1-phenylethan-1-ol ((R)-4), but the ee in HY are much higher (78-83 %) than in TRHY (4-62 %). In both modes, iPrOK is needed to generate the active catalysts, and the more there is (1-4500 equiv), the faster the catalytic reactions. The ee is about constant in HY and diminishes in TRHY as more iPrOK is added. The ketone TRHY precatalyst [Ru(Cl)(2)((S,S)-cyP(2)(NH)(2))] ((S,S)-2), established at s:c=200, has also turned out to be a ketone HY precatalyst at up to s:c=10(6), again as tested on 3 in iPrOH under standard conditions. The enantioselectivity is opposite in the two modes and only high in TRHY: with (S,S)-2, one obtains (R)-4 in up to 98 % ee in TRHY as reported and (S)-4 in 20-25 % ee in HY. iPrOK is again required to generate the active catalysts in both modes, and again, the more there is, the faster the catalytic reactions. The ee in TRHY are only high when 0.5-1 equivalents iPrOK are used and diminish when more is added, while the (low) ee is again about constant in HY as more iPrOK is added (0-4500 equiv). The new [Ru(H)(Cl)((S,S)-cyP(2)(NH)(2))] isomers (S,S)-9 A and (S,S)-9 B (mixture, exact structures unknown) are also precatalysts for the TRHY and HY of 3 under the same conditions, and (R)-4 is again produced in TRHY and (S)-4 in HY, but the lower ee shows that in TRHY (S,S)-9 A/(S,S)-9 B do not lead to the same catalysts as (S,S)-2. In contrast, the ee are in accord with (S,S)-9 A/(S,S)-9 B leading to the same catalysts as (S,S)-2 in HY. The kinetic rate law for the HY of 3 in iPrOH and in benzene using (S,S)-9 A/(S,S)-9 B/iPrOK or (S,S)-9 A/(S,S)-9 B/tBuOK is consistent with a fast, reversible addition of 3 to a five-coordinate amidohydride (S,S)-11 to give an (S,S)-11-substrate complex, in competition with the rate-determining addition of H(2) to (S,S)-11 to give a dihydride [Ru(H)(2)((S,S)-cyP(2)(NH)(2))] (S,S)-10, which in turn reacts rapidly with 3 to generate (S)-4 and (S,S)-11. The established achiral ketone TRHY precatalyst [Ru(Cl)(2)(ethP(2)(NH)(2))] (12) has turned out to be also a powerful precatalyst for the HY of 3 in iPrOH at s:c=10(6) and of some other substrates. Response to the presence of iPrOK is as before, except that 12 already functions well without it at up to s:c=10(6).

Optosensing behavior of the first Ru(II)-compound of di-2-pyridylketone-p-nitrophenylhydrazone (dpknph), [Ru(bpy)2(dpknph)]Cl2.

The reaction between Ru(bpy)(2)Cl(2) (bpy=2,2'-bipyridine) and di-2-pyridylketone-p-nitrophenylhydrazone (dpknph) in refluxing ethanol gave [Ru(bpy)(2)(dpknph)]Cl(2) in good yield. Optical measurements on [Ru(bpy)(2)(dpknph)]Cl(2) in non-aqueous media revealed the presence of two interlocked electronic states due to conformational changes associated with the hydrazone moiety of [Ru(bpy)(2)(dpknph)]Cl(2). The equilibrium distribution of the high-energy beta-conformation associated with the high-energy electronic state and the low-energy alpha-conformation associated with the low-energy electronic state is solvent and solute dependent controlled by the solvent-solute and solute-solute interactions. The interplay between the alpha- and beta-conformations of [Ru(bpy)(2)(dpknph)]Cl(2) allowed calculations of the extinction coefficients of electronic states by forcing the equilibrium to shift to one conformation using chemical stimuli. Extinction coefficients of 56000+/-2000 and 48500+/-2000 M(-1) cm(-1) were calculated in DMSO for the beta- and alpha-conformations of [Ru(bpy)(2)(dpknph)]Cl(2), respectively, using excess HgCl(2) in DMSO. Thermo-optical measurements on [Ru(bpy)(2)(dpknph)]Cl(2) in DMSO confirmed the interconversion between the alpha- and beta-conformations of [Ru(bpy)(2)(dpknph)]Cl(2) and gave changes in enthalpy (DeltaH(ø)) of -35.5+/-4.0 and 13.0+/-0.5 kJ mol(-1), entropy (DeltaS(ø)) of -126.9+/-20 and 45.2+/-4.5 kJ mol(-1), and free energy (DeltaG(ø)) of 2.31+/-0.2 and -0.48+/-0.2 kJ mol(-1) in the absence and presence of NaBH(4) at 295 K. The high values for the extinction coefficients and low values and sensitivity of the activation parameters for the interconversion between the alpha- and beta-conformations of [Ru(bpy)(2)(dpknph)]Cl(2) in DMSO to solution composition allowed for the use of this system ([Ru(bpy)(2)(dpknph)]Cl(2) and surrounding solvent or solute molecules) as a spectrophotometric sensor for a variety of chemical stimuli that include metal ions. Group 12 metal ions in concentrations as low as 1.00x10(-8) M can be detected and determined using [Ru(bpy)(2)(dpknph)]Cl(2) in DMSO in the presence and absence of NaBH(4).

Mechanism of the hydrogenation of ketones catalyzed by trans-dihydrido(diamine)ruthenium II complexes.

The complexes trans-RuH(Cl)(tmen)(R-binap) (1) and (OC-6-43)-RuH(Cl)(tmen)(PPh(3))(2) (2) are prepared by the reaction of the diamine NH(2)CMe(2)CMe(2)NH(2) (tmen) with RuH(Cl)(PPh(3))(R-binap) and RuH(Cl)(PPh(3))(3), respectively. Reaction of KHB(sec)Bu(3) with 1 yields trans-Ru(H)(2)(R-binap)(tmen) (5) while reaction of KHB(sec)Bu(3) or KO(t)Bu with 2 under Ar yields the new hydridoamido complex RuH(PPh(3))(2)(NH(2)CMe(2)CMe(2)NH) (4). Complex 4 has a distorted trigonal bipyramidal geometry with the amido nitrogen in the equatorial plane. Loss of H(2) from 5 results in the related complex RuH(R-binap)(NH(2)CMe(2)CMe(2)NH) (3). Reaction of H(2) with 4 yields the trans-dihydride (OC-6-22)-Ru(H)(2)(PPh(3))(2)(tmen)(6). Calculations support the assignment of the structures. The hydrogenation of acetophenone is catalyzed by 5 or 4 in benzene or 2-propanol without the need for added base. For 5 in benzene at 293 K over the ranges of concentrations [5] = 10(-)(4) to 10(-)(3) M, [ketone] = 0.1 to 0.5 M, and of pressures of H(2) = 8 to 23 atm, the rate law is rate = k[5][H(2)] with k = 3.3 M(-1) s(1), DeltaH++ = 8.5 +/- 0.5 kcal mol(-1), DeltaS++ = -28 +/- 2 cal mol(-1) K(-1). For 4 in benzene at 293 K over the ranges of concentrations [4] = 10(-4) to 10(-3) M, [ketone] 0.1 to 0.7 M, and of pressures of H(2) = 1 to 6 atm, the preliminary rate law is rate = k[4][H(2)] with k = 1.1 x 10(2) M(-1) s(-1), DeltaH++ = 7.6 +/- 0.3 kcal mol(-1), DeltaS++ = -23 +/- 1 cal mol(-1) K(-1). Both theory and experiment suggest that the intramolecular heterolytic splitting of dihydrogen across the polar Ru=N bond of the amido complexes 3 and 4 is the turn-over limiting step. A transition state structure and reaction energy profile is calculated. The transfer of H(delta+)/H(delta-) to the ketone from the RuH and NH groups of 5 in a Noyori metal-ligand bifunctional mechanism is a fast process and it sets the chirality as (R)-1-phenylethanol (62-68% ee) in the hydrogenation of acetophenone. The rate of hydrogenation of acetophenone catalyzed by 5 is slower and the ee of the product is low (14% S) when 2-propanol is used as the solvent, but both the rate and ee (up to 55% R) increase when excess KO(t)Bu is added. The formation of ruthenium alkoxide complexes in 2-propanol might explain these observations. Alkoxide complexes [RuP(2)]H(OR)(tmen), [RuP(2)] = Ru(R-binap) or Ru(PPh(3))(2), R= (i) Pr, CHPhMe, (t)Bu, are observed by reacting the alcohols (i)PrOH, phenylethanol, and (t)BuOH with the dihydrides 5 and 6, respectively, under Ar. In the absence of H(2), the amido complexes 3 and 4 react with acetophenone to give the ketone adducts [RuP(2)]H(O=CPhMe)(NH(2)CMe(2)CMe(2)NH) in equilibrium with the enolate complexes trans- [RuP(2)](H)(OCPh=CH(2))(tmen) and eventually the decomposition products [RuP(2)]H(eta(5)-CH(2)CPhCHCPhO), with the binap complex characterized crystallographically. In general, proton transfer from the weakly acidic molecules dihydrogen, alcohol, or acetophenone to the amido nitrogen of complexes 3 and 4 is favored in two ways when the molecule coordinates to ruthenium: (1) an increase in acidity of the molecule by the Lewis acidic metal and (2) an increase in the basicity of the amido nitrogen caused by its pyramidalization. The formato complexes trans-[RuP(2)]H(OCHO)(tmen) were prepared by reacting the respective complex 4 or 5 with formic acid. The crystal structure of RuH(OCHO)(PPh(3))(2)(tmen) displays similar features to the calculated transition state for H(delta+)/H(delta-) transfer to the ketone in the catalytic cycle.