Rugged Large Volume Injection for Sensitive Capillary LC-MS Environmental Monitoring.

A rugged and high throughput capillary column (cLC) LC-MS switching platform using large volume injection and on-line automatic filtration and filter back-flush (AFFL) solid phase extraction (SPE) for analysis of environmental water samples with minimal sample preparation is presented. Although narrow columns and on-line sample preparation are used in the platform, high ruggedness is achieved e.g., injection of 100 non-filtrated water samples did not result in a pressure rise/clogging of the SPE/capillary columns (inner diameter 300 µm). In addition, satisfactory retention time stability and chromatographic resolution were also features of the system. The potential of the platform for environmental water samples was demonstrated with various pharmaceutical products, which had detection limits (LOD) in the 0.05-12.5 ng/L range. Between-day and within-day repeatability of selected analytes were <20% RSD.

Polymerisation and surface modification of methacrylate monoliths in polyimide channels and polyimide coated capillaries using 660 nm light emitting diodes.

An investigation into the preparation of monolithic separation media utilising a cyanine dye sensitiser/triphenylbutylborate/N-methoxy-4-phenylpyridinium tetrafluoroborate initiating system activated by 660 nm light emitting diodes is reported. The work demonstrates multiple uses of red-light initiated polymerisation in the preparation of monolithic stationary phases within polyimide and polyimide coated channels and the modification of monolithic materials with molecules which absorb strongly in the UV region. This initiator complex was used to synthesise poly(butyl methacrylate-co-ethylene dimethacrylate) and poly(methyl methacrylate-co-ethylene dimethacrylate) monolithic stationary phases in polyimide coated fused silica capillaries of varying internal diameters, as well as within polyimide micro-fluidic chips. The repeatability of the preparation procedure and resultant monolithic structure was demonstrated with a batch of poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths in 100 µm i.d. polyimide coated fused silica capillary, which were applied to the separation of a model protein mixture (ribonuclease A, cytochrome C, myoglobin and ovalbumin). Taking an average from 12 chromatograms originating from each batch, the maximum relative standard deviation of the retention factor (k) for the protein separations was recorded as 0.53%, the maximum variance for the selectivity factor (α) was 0.40% while the maximum relative standard deviation in peak resolution was 8.72%. All maxima were recorded for the Ribonuclease A/Cytochrome C peaks. Scanning electron microscopy confirmed the success of experiments in which poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths were prepared using the same initiation approach in capillary and micro-fluidic chips, respectively. The initiating system was also applied to the photo-initiated grafting of a chromophoric monomer onto poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths within poly(tetrafluoroethylene) coated fused silica capillaries.

Evanescent wave-initiated photopolymerisation as a new way to create monolithic open-tubular capillary columns: use as enzymatic microreactor for on-line protein digestion.

Evanescent wave-initiated photopolymerisation in an optically wave guiding PTFE-coated fused silica capillary using light-emitting diode as a light source, is established here as a way to fabricate monolithic porous layer open-tubular capillary columns with a potential in capillary separation methods; application of the obtained open-tubular columns as enzymatic microreactors for on-line protein digestion is demonstrated.

Deep-UV-LEDs in photometric detection: a 255 nm LED on-capillary detector in capillary electrophoresis.

A 255 nm deep-UV-light-emitting diode (deep-UV-LED) is investigated as a novel light source for photometric detection in view of fundamental properties of UV-LEDs, in particular emission spectra and energy conversion. Its performance in on-capillary photometric detection in capillary electrophoresis (CE) is determined and the potential of deep-UV-LEDs in optical detection is discussed.

Development of microfluidic chips for heterogeneous receptor-ligand interaction studies.

A simple microfluidic-based technique to quantitate the binding affinity between the glycopeptide antibiotics teicoplanin from Actinoplanes teicomyceticus and vancomycin from Streptomyces orientalis and 5-carboxyfluorescein-D-Ala-D-Ala-D-Ala (5-FAM-(DA)(3)) is described. In this work, (3-aminopropyl)triethoxysilane is used to modify the surfaces of a series of microchannels, and each channel is subsequently exposed to a solution of antibiotic for a few minutes. The antibiotic is retained after washing through electrostatic interactions, and the series of channels are subsequently exposed to an increasing concentration of 5-FAM-(DA)(3) followed by washing to exclude any nonspecific binding. The extent of fluorescence is quantified using a microscope fitted with a CCD camera. The binding constants for the interaction of teicoplanin and vancomycin with the fluorescent peptide were determined to be 6.03 +/- 0.97 x 10(4) and 4.93 +/- 1.13 x 10(4) M(-1), respectively, in good agreement with previous data. The ease of quantifying the extent of interaction in this microchip technique may prove powerful for exploration of a myriad of receptor-ligand pairs.

Photoinitiated polymerisation of monolithic stationary phases in polyimide coated capillaries using visible region LEDs.

The spatially controlled synthesis of poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic stationary phases in polyimide coated fused silica capillaries by visible light induced radical polymerisation using a three-component initiator and a 660 nm light emitting diode (LED) as a light source is presented here.

UV-LED photopolymerised monoliths.

For the first time photopolymerisation of polymer monoliths has been realised with UV-light emitting diodes (LEDs) as light source and demonstrated with polymethacrylate monoliths created in fused silica capillaries and plastic chips.