ABSTRACT
This study explores the impact of disinfection techniques on the mechanical properties of poly(lactic acid) (PLA), a crucial material in the production of medical implants, tissue engineering, orthopedic devices and drug delivery systems, owing to its biocompatibility and ease of manufacturing. The focus is on evaluating the effectiveness of ultraviolet (UV) type C (254 nm wavelength) and the combined use of type C and B (310 nm wavelength) disinfection methods. Fifteen tensile test specimens (ASTM D638) and fifteen compression test specimens (ASTM D695) were utilized to assess PLA's mechanical properties, including yield strength, ultimate strength, and fracture strength. The investigation involved subjecting the specimens to the specified disinfection methods and evaluating these properties both before and after the disinfection process. In the tensile test, a statistically significant difference (p = 0) in yield displacement was observed among the three groups. Additionally, a notable difference (p = 0.047) in fracture displacement was identified between the untreated group and the UVC and UVB combination group. No discernible impact on yield or fracture forces was noted. In the compression test, there was a significant difference (p = 0.04) in yield displacement and a clear difference (p = 0.05) in fracture force between the untreated group and the UVC and UVB combination group. The hybrid combination of UVC and UVB disinfection techniques did not affect yield force in both tensile and compression tests. However, it demonstrated a clear impact on displacement, suggesting its potential as a promising disinfection technique in the medical field.
ABSTRACT
Magnetic polymer composites have recently attracted considerable interest, primarily because of their promising applications, especially in the biomedical industry. The aim of this study is to investigate the impact of ultraviolet C (UVC) irradiation as a disinfection method on the mechanical characteristics of composite polymer magnets. Tensile and compression tests were conducted following the standards set by ASTM D3039 and ASTM D3410, respectively. In addition, energy dispersive spectroscopy (EDS) was used to determine the effect of the disinfection method on the amount of carbon, oxygen, and iron within the surface of the composite polymer magnet material. The UVC's irradiation impact was statistically assessed by a t-test. The results of the tensile tests demonstrated a significant increase in the transition force, measuring 0.41 kN and 0.58 kN before and after UVC exposure, respectively. Similarly, the outcomes of the compression tests showed a notable increase in yield force, registering 4.9 kN and 6 kN before and after UVC treatment. This suggests that the composite magnetic material has gained a higher capacity to withstand compressive loads than tensile loads. Finally, the EDS analysis revealed the carbon mass percentage was 71.69% prior to UVC radiation exposure, with it increasing to 78.56%, following exposure. This suggests that the composite material exhibited improved hardness. These findings highlight that UVC irradiation has a beneficial impact on both the mechanical and chemical properties of the composite magnet material, which support its use as a disinfection method in clinical settings.
ABSTRACT
Cell phones may be an ideal habitat for colonization by bacterial pathogens, especially in hot climates, and may be a reservoir or vehicle in transmitting nosocomial infections. We investigated bacterial contamination on cell phones of healthcare workers in three hospitals in Saudi Arabia and determined antibacterial resistance of selected bacteria. A questionnaire was submitted to 285 healthcare workers in three hospitals, and information was collected on cell phone usage at the work area and in the toilet, cell phone cleaning and sharing, and awareness of cell phones being a source of infection. Screening on the Vitek 2 Compact system (bioMérieux Inc., USA) was done to characterize bacterial isolates. Of the 60 samples collected from three hospitals, 38 (63.3%) were positive with 38 bacterial isolates (4 Gram-negative and 34 Gram-positive bacteria). We found 38.3% of cell phones were contaminated with coagulase-negative staphylococci, particularly Staphylococcus epidermidis (10 isolates). Other bacterial agents identified were S. aureus, S. hominis, Alloiococcus otitis, Vibrio fluvialis, and Pseudomonas stutzeri. Antimicrobial susceptibility testing showed that most coagulase-negative staphylococci were resistant to benzylpenicillin, erythromycin, and rifampicin. Eight isolates were resistant to oxacillin, specifically S. epidermidis (3), S. hominis (2), and S. warneri (2). A. otitis, a cause of acute otitis media showed multidrug resistance. One isolate, a confirmed hetero-vancomycin intermediate-resistant S. aureus, was resistant to antibiotics, commonly used to treat skin infection. There was a significant correlation between the level of contamination and usage of cell phone at toilet and sharing. Our findings emphasize the importance of hygiene practices in cell phone usage among healthcare workers in preventing the transmission of multidrug-resistant microbes.
