Utility of the food colorant erythrosine B as an effective green probe for quantitation of the anticancer sunitinib. Application to pharmaceutical formulations and human plasma.

Sunitinib is a tyrosine kinase inhibitor used for the treatment of renal cell carcinoma and gastrointestinal stromal tumors. In this study, two spectroscopic methods, spectrofluorometric and spectrophotometric, were utilized to quantify sunitinib in different matrices. In method I, the native fluorescence of erythrosine B was quenched by forming ion-pair complex with increasing quantities of sunitinib. This approach was utilized for measuring sunitinib in its dosage forms and spiked plasma. After excitation at 528 nm, the quenching of fluorescence is linearly related to the concentration across the range of 0.05-0.5 µg mL-1 at 550 nm in Britton-Robinson buffer (pH 4.0), with a correlation value of 0.9999 and a high level of sensitivity with detection limit down to 10 ng mL-1 . Method II relies on spectrophotometric measurements of the produced complex at 550 nm across a range of 0.5-10.0 µg mL-1 , with good correlation value of 0.9999. This method has a detection limit down to 0.16 µg mL-1 . The proposed methodologies were validated according to International Conference on Harmonization (ICH) guidelines with satisfactory results. The stoichiometry of the reaction was determined through the application of Job's method, while the mechanism of quenching was investigated by employing the Stern-Volmer plot. The designated methods were used to estimate sunitinib in its capsules and in spiked human plasma. Additionally, the statistical analysis of the data revealed no substantial differences when compared to previous reported spectroscopic method. Green assessment tools provide further details about the eco-friendly nature of the methods.

Label-free green estimation of atenolol and ivabradine hydrochloride in pharmaceutical and biological matrices by synchronous spectrofluorimetry.

In this work, a label-free, rapid, and sensitive synchronous spectrofluorometric method was implemented to assay atenolol (ATL) and ivabradine hydrochloride (IVB) in pharmaceutical and biological matrices. Simultaneous determination of ATL and IVB by conventional spectrofluorometry cannot be implemented because of the clear overlap of the emmision spectra of ATL and IVB. To overcome this problem, synchronous fluorescence measurements at a constant wavelength difference (Δλ) combined with mathematical derivatization of the zero order spectra were perforemed. The results indicated a good resolution between emission spectra of the studied drugs when the first-order derivative of the synchronous fluorescence scans at Δλ = 40 nm was conducted using ethanol as the optimum solvent which is less hazardous than other organic solvents such as methanol and acetonitrile, keeping the method safe and green. The amplitudes of the first derivative synchronous fluorescent scans of ATL and IVB in ethanol were monitored at 286 and 270 nm to simultaneously estimate ATL and IVB, respectively. Method optimisation was conducted by assessing different solvents, buffer pHs, and surfactants. The optimum results were obtained when ethanol was utilized as a solvent without using any other additives. The developed method was linear over concentration ranges of 10.0-250.0 ng mL-1 for IVB and 100.0-800.0 ng mL-1 for ATL with detection limits of 3.07 and 26.49 ng mL-1 for IVB and ATL, respectively. The method was utilized to assay the studied drugs in their dosages and in human urine samples with acceptable % recoveries and RSD values. The greenness of the method was implemented by three approaches involving the recently reported metric (AGREE) which ensured the eco-freindship and safety of the method.

Turn-off fluorescence of S,N-doped carbon dots for determination of two nitro-containing drugs in dosage forms and human plasma.

This study describes the development of an environmentally-friend optical nanosensor for the rapid spectrofluorimetric assessment of two nitro-compounds, namely nitrofurantoin and dantrolene in their dosage forms and plasma samples. A one-step synthetic technique successfully created very bright water-soluble carbon quantum dots doped with sulfur and nitrogen (S,N-CQDs). Carbon was derived from citric acid, while nitrogen and sulfur were obtained from thiosemicarbazide. The dimensions of the synthesized dots were measured using a high-resolution transmission electron microscope. FT-IR spectroscopy was used to determine which functional groups were located on their surfaces. The nanosensor's fluorescence emission peaked intensely at 415 nm after excitation at 345 nm with a quantum yield of about 0.52. The inherent fluorescence of the nanosensors gradually decreased upon addition of the studied analytes in increasing concentrations. The fluorescence reduction of nanosensor with the concentrations of the investigated drugs demonstrated linear correlation within the ranges of 0.5-8.0 µg/mL and 1.0-10.0 µg/mL with limits of detection of 0.14 µg/mL (0.59 µM) and 0.23 µg/mL (0.73 µM) for nitrofurantoin and dantrolene, respectively. The recommended method was used to determine the concentrations of the investigated drugs in their commercial capsules, with recoveries ranging from 97.90 % to 101.57 % and low percent RSD values less than 2 %. Moreover, the method was adapted for the in-vitro analysis of the two analytes in spiked human plasma samples with % recoveries from 95.20 % to 102.20 %. The mechanism of interaction between each analyte and the dots was also investigated. The selectivity of the approach for measuring analytes concentration in the presence of excipients, co-formulated medications, or co-administered pharmaceuticals was further evaluated through an interference study. The suggested method's validity was evaluated in accordance with ICH criteria.

Insights into the spectrofluorometric determination of the neuromuscular blocker mivacurium chloride.

Fluorescence spectroscopy is gaining interest in the analysis and quantitative determination of different drugs. This study was carried out to investigate the fluorometric properties of the short-acting muscle relaxant mivacurium in its pure form, injection, and human plasma. It is nondepolarizing skeletal muscle relaxant for intravenous (IV) administration. Mivacurium shows a strong native fluorescence in methanol at 317 nm after excitation at 230 nm (Method I). The critical parameters that may influence the fluorescence of this drug were carefully studied. A linear response between concentration and fluorescence was constructed over the concentration range: 20.0 to 400.0 ng/mL with determination coefficient (r2) equal to 0.9998. Additionally, the correlation coefficient of the linear relationship (r) was found to be 0.9999 with a slope = 2.196 and intercept = -16.61. Limits of quantitation and detection were calculated mathematically to be 17.45 and 5.75 ng/mL respectively. Further estimation of mivacurium in spiked human plasma was performed by construction of specific calibration curve and the obtained correlation coefficient was 0.9948. Moreover, the ability to determine mivacurium in the presence of commonly co-administered drugs were investigated including propofol and thiopental. Method II includes the determination of MVC in the presence of propofol utilizing the first derivative synchronous fluorescence spectroscopy. The results of method II indicated acceptable percentage recoveries from 98.88 to 100.75 %. Statistical evaluation of the results revealed satisfactory accuracy and precision.

Investigation of facile spectroscopic approaches for rapid calycosin determination in invitro biological samples and pharmaceuticals; application to the content uniformity of capsules.

Calycosin, the major bioactive isoflavonoid inAstragali Radix and an important anti-viral drug with a variety of pharmacological actions, is being determined by five different spectroscopic methods. Two spectrophotometric methods have been investigated including measuring the absorption spectra at λmax = 270 nm and the first derivative spectra at λ = 288 nm for methods I and II, respectively. For the first time; the native fluorescence of calycosin is measured without adding any reagents. The fluorescence intensity was measured at 340 nm after excitation at 282 nm in method III. The fourth method involves the direct measuring of a first derivative spectrofluorimetric emission peak at 292 nm. In method V synchronous fluorescence spectra were recorded in methanol at Δλ = 70 nm. The linear range for the fluorescence-based methods was 0.05-1.0 µg/mL and for the UV-based methods was 0.5-10.0 µg/mL. The methods were validated per International Council of Harmonization (ICHQ2R1) guidelines. The limits of detection were found to be down to 0.11 and 0.12 µg/mL for the spectrophotometric methods, and 15.0, 18.0,16.0 ng/ mL, for the spectrofluorimetric approaches respectively, representing the high sensitivity. Accordingly, this permitted the quantitation of calycosin in spiked human plasma samples with satisfactory percentage recoveries (94.50.-102.50 %). The methods were utilized for calycosin analysis in different matrices including plasma and capsules with high precision and accuracy.

Simultaneous spectrofluorimetic determination of remdesivir and simeprevir in human plasma.

As new infectious mutations of SARS-CoV-2 emerged throughout the world, innovative therapies to counter the virus-altered drug sensitivities were urgently needed. Several antiviral options have been in clinical trials or in compassionate use for the treatment of SARS-CoV-2 infections in an attempt to minimize both clinical severity and viral shedding. Recent research indicated that simeprevir acts synergistically with remdesivir, allowing for a multiple-fold decrease in its effective dose when used at physiologically acceptable concentrations. The goal of this work is to develop a sensitive synchronous spectrofluorimetric approach to simultaneously quantify the two drugs in biological fluids. Using this method, remdesivir and simeprevir could be measured spectrofluorimetrically at 283 and 341 nm, respectively, without interference from each other using Δλ of 90 nm. The effect of various experimental parameters on the fluorescence intensity of the two drugs was extensively explored and optimized. For each of remdesivir and simeprevir, the method exhibited a linearity range of 0.10-1.10 µg/mL, with lower detection limits of 0.01 and 0.02 µg/mL and quantification limits of 0.03 and 0.05 µg/mL, respectively. The high sensitivity of the developed method permitted the simultaneous determination of both drugs in spiked plasma samples with % recoveries ranging from 95.0 to 103.25 with acceptable standard deviation values of 1.92 and 3.04 for remdesivir and simeprevir, respectively. The validation of the approach was approved by the International Council of Harmonization (ICH) guidelines.

Spectroscopic strategies for quantitation of varenicline in pharmaceutical preparations and content uniformity testing.

Herein, two new facile methods were examined for varenicline determination using erythrosine. The latter is a food additive that has been recently investigated as a fluorescent dye for the determination of drugs. In the first method, the fluorescence of erythrosine B was quenched quantitatively by increasing the concentration of varenicline through ion-pair complex formation. This linear response was a basis for the spectrofluorimetric method used for varenicline quantitation in pure and dosage forms. The quenching is correlated with the concentration linearly over the range of 0.4-4.0 µg ml-1 at 550 nm after excitation at 528 nm with a correlation coefficient of 0.9993. Different parameters were investigated to reach the optimal conditions with the highest sensitivity and repeatability. The second method is depending on measuring the formed complex by spectrophotometry at 550 nm over the range of 1.0-10.0 µg ml-1 with an excellent correlation coefficient of 0.9999. The suggested methods were validated consistently with ICH guidelines, with acceptable results. The procedures were used to test the uniformity of content of Champix tablets. By comparing with the previous spectroscopic method, there was no significant difference as revealed from the calculated Student t-test and variance ratio F-test values.

Thiosemicarbazide functionalized carbon quantum dots as a fluorescent probe for the determination of some oxicams: application to dosage forms and biological fluids.

In this study, highly fluorescent water-soluble nitrogen and sulfur doped carbon quantum dots (N, S-CQDs) were synthesized via a one-step hydrothermal process utilizing citric acid as a carbon source and thiosemicarbazide as a sulfur and nitrogen source. The obtained N, S-CQDs exhibited an intense emission band at 415 nm (λ ex = 345 nm). In the presence of either piroxicam, tenoxicam or lornoxicam, the emission band at 415 nm was significantly quenched which might be triggered due to destruction of the surface passivation layer of the N, S-CQDs. A linear correlation was found between the reduction in the fluorescence intensity of N, S-CQDs and the concentration of each drug in the ranges of 2.0-25.0 µM, 10.0-100.0 µM and 20.0-200.0 µM with correlation coefficients of more than 0.999 for all drugs. The detection limits were 0.49 µM, 1.58 µM and 4.63 µM for piroxicam, tenoxicam and lornoxicam, respectively. The effect of experimental parameters affecting the performance of the method was investigated and optimized. The developed sensor has the advantages of simplicity, time-saving, convenience and satisfactory selectivity for determination of the studied drugs in dosage forms with high % recoveries (98.86-101.69%). The method was extended for determination of piroxicam in spiked plasma with % recoveries ranging from 97.95-101.36%. The method was validated in accordance with International Council of Harmonization (ICH) standards, and the results obtained were compared statistically to those given by reported methods, indicating no significant differences in the level of accuracy and precision. The mechanism of the quenching process was studied and elucidated. The structure-activity relationship between the three drugs and the quenching efficiency was also studied and discussed.

Quantitative analysis of favipiravir and hydroxychloroquine as FDA-approved drugs for treatment of COVID-19 using synchronous spectrofluorimetry: application to pharmaceutical formulations and biological fluids.

Coronavirus disease 2019 (COVID-19) is a contagious viral infection caused by coronavirus 2 (SARS-CoV-2) that causes severe acute respiratory syndrome. It has ravaged several countries and burdened many healthcare systems. As the process of authorizing a novel treatment for human use is extensive and involves multiple phases to obtain safety information and identify potential concerns. Therefore, the fastest and easiest choice was to use United States Food and Drug Administration (US FDA)-approved drugs such as favipiravir and hydroxychloroquine. For the simultaneous estimation of both medications, a simple synchronous spectrofluorimetric approach was established in which both drugs were measured at 372 and 323 nm, respectively in the presence of each other without interference at Δλ 60 nm. The effect of various experimental conditions on synchronous fluorescence intensities were thoroughly investigated and optimized. The maximum synchronous fluorescence intensities were obtained at pH 5.4 using acetate buffer (0.2 M, 0.5 ml) and ethanol as a diluent. Excellent linearity ranges were obtained using 1.0-18.0 ng/ml and 10.0-120.0 ng/ml for favipiravir and hydroxychloroquine, respectively. The approach exhibited high sensitivity with detection limits down to 0.25 ng/ml and 1.52 ng/ml and quantitation limits down to 0.77 ng/ml and 4.62 ng/ml, respectively. Spiking human plasma samples with the studied drugs yielded high % recoveries, allowing a significant bioanalytical application. Moreover, the method was validated according to International Conference on Harmonization guidelines and further applied to commercial pharmaceutical preparations with good results.

Synchronized spectrofluorimetric determination of ponatinib and curcumin as an effective therapeutic combination in laboratory prepared mixtures and human plasma samples.

Curcumin is a natural product that is frequently utilized in cancer prevention and treatment. The significant benefit of vegetable-derived nutraceuticals in combination with widespread cytostatic medication such as ponatinib is to reduce toxicity and side effects. In this paper, we focus the study on analytical quantification of ponatinib and curcumin through highly sensitive synchronous spectrofluorometric method. Applying this method at Δλ = 160 nm, each of ponatinib and curcumin could be measured at 303 and 412 nm without interference from each others. The diverse experimental factors impacting the performance of the method were studied and optimized. The method exhibited a reasonable linearity in the ranges of 5.0-60.0 and 10.0-200.0 ng/mL for ponatinib and curcumin, respectively with detection limits of 1.48 and 1.22 ng/mL and quantitation limits of 4.49 and 3.68 ng/mL, respectively. The anticipated method was employed for the assessment and evaluation of the studied drugs in the spiked human plasma samples. The mean % recoveries in plasma samples (n = 6) for each of ponatinib and curcumin were 99.84 ± 1.86 and 100.06 ± 2.72, accordingly. The developed method was validated in conformity with the requirements of International Council of Harmonization (ICH).

Investigation of the fluorescence of benoxinate for facile determination in pure form, eye drops and aqueous humor.

A new approach to determine the local anesthetic benoxinate spectrofluorimetrically was developed. It was found that benoxinate exhibits strong native fluorescence in ethanol at 371 nm after excitation at 297 nm. There was a linear response between the fluorescence intensity and the concentration of the studied drug over the range of 10.0-100.0 ng/ mL. The suggested spectrofluorimetric method was optimized and validated following the pharmacopoeial guidelines. The obtained results were fully discussed and statistically analyzed in relevance to a previous published spectroscopic method. The limit of quantification (LOQ) of the present method was 1.79 ng/mL. Inter-day and intra-day precision relative standard deviations were lower than 1.5%.Finally, the proposed methodology has been adopted for determination of benoxinate in aqueous humor with a mean percentage recovery 99.87 ± 1.66 as well as in the pharmaceutical eye drops with a mean percentage recovery 100.37 ± 1.32. The method is cost-effective and green as it depends in water and ethanol mainly.

First-order derivative synchronous spectrofluorimetric determination of two antihypertensive drugs, metolazone and valsartan, in pharmaceutical and biological matrices.

In this study, a facile, rapid, and sensitive spectrofluorimetric method was evolved to analyse two antihypertensive drugs, namely, metolazone (MTZ) and valsartan (VST), in pharmaceutical and biological matrices. Both analytes exhibited intrinsic fluorescence activities which were significantly affected by environmental factors such as pH and solvent systems. However, simultaneous determination of MTZ and VST by conventional spectrofluorometry cannot be achieved simply because of the strong overlap between their fluorescence spectra. Thus, a combination of derivative and synchronous spectrofluorometry was conducted to overcome this dilemma. The proposed method relies on measurement of the first-order derivative of synchronous fluorescence intensity of the studied drugs at Δλ = 160 nm using 0.1 M acetic acid as the optimum solvent. The amplitudes of the first derivative synchronous fluorescence spectra of MTZ and VST were recorded at 236.0 nm (zero-crossing point of VST) and at 262.8 nm (zero-crossing point of MTZ) for simultaneous analysis of MTZ and VST, respectively. The fluorescent method was optimized efficiently to get the maximum selectivity and sensitivity by investigating different solvents, different buffer pHs, and different surfactants. The highest sensitivity and selectivity were achieved when 0.1 M acetic acid was used as a solvent. The method showed a linear concentration range of 10.0-100.0 ng mL-1 and a limit of detection of <3.0 ng mL-1 for each analyte. Statistical data analysis confirmed that no significant difference between the proposed spectrofluorometric method and the reference methods. The validity of the proposed spectrofluorometric method approved its suitability for quality control work. The proposed spectrofluorometric method was applied to assay the studied drugs in pharmaceutical dosage and in biological matrices with acceptable %recoveries and small RSD values.

Two validated spectrofluorimeteric and high performance liquid chromatography (HPLC) methods with fluorescence detection for the analysis of a new anti-hepatitis C drug, daclatasvir hydrochloride, in raw material or tablet form and in biological fluids.

Two sensitive and accurate methods have been developed for the estimation of daclatasvir (DAC) in its raw material, dosage form and in biological fluids. Method I is based on the measurement of DAC native fluorescence in methanol at 385 nm after excitation at 315 nm. The relationship between fluorescence intensity and concentration was found to be rectilinear over the linearity range (3.0-30.0 ng/ml). There were good per cent recoveries both in the dosage form (99.87 ± 0.84) and in spiked human plasma (99.96 ± 1.54%). Method II utilized reversed-phase high performance liquid chromatography to estimate the antiviral agent daclatasvir hydrochloride against hepatitis C within 4.0 min on a C18 column (Eurosphere. 100-5 C18, 150 × 4.6 mm, Germany) using a mobile phase consisting of acetonitrile and 0.1 M sodium dihydrogen phosphate (30:70, v/v) at pH 3.0 and with a fluorescence detector adjusted to 315 nm and 385 nm for excitation and emission respectively. The calibration curve was linear over the range (20.0-200.0 ng/ml) with SD 1.38%, error 0.56%, recovery 99.99 ± 1.30% in tablets, recovery 100.28 ± 1.73% in spiked urine and recovery 99.63 ± 2.72% in spiked plasma.The new developed methods were successfully applied to the assay of the daclatasvir in tablet form and extended to its determination in real plasma, spiked human plasma and urine. The analytical performance of the proposed method was validated according to International Conference on Harmonization (ICH) guidelines. The proposed methods were compared with the results of a comparison method and it was found that there was no significant difference between the methods, as revealed by Student's t-test and variance ratio F-test.