Practical comparison of 2.7 microm fused-core silica particles and porous sub-2 microm particles for fast separations in pharmaceutical process development.

Fused-core silica stationary phases represent a key technological advancement in the arena of fast HPLC separations. These phases are made by fusing a 0.5 microm porous silica layer onto 1.7 microm nonporous silica cores. The reduced intra-particle flow path of the fused particles provides superior mass transfer kinetics and better performance at high mobile phase velocities, while the fused-core particles provide lower pressure than sub-2 microm particles. In this work, chromatographic performance of the fused-core particles (Ascentis Express) was investigated and compared to that of sub-2 microm porous particles (1.8 microm Zorbax Eclipse Plus C18 and 1.7 microm Acquity BEH C18). Specifically, retention, selectivity, and loading capacity were systematically compared for these two types of columns. Other chromatographic parameters such as efficiency and pressure drop were also studied. Although the fused-core column was found to provide better analyte shape selectivity, both columns had similar hydrophobic, hydrogen bonding, total ion-exchange, and acidic ion-exchange selectivities. As expected, the retention factors and sample loading capacity on the fused-core particle column were slightly lower than those for the sub-2 microm particle column. However, the most dramatic observation was that similar efficiency separations to the sub-2 microm particles could be achieved using the fused-core particles, without the expense of high column back pressure. The low pressure of the fused-core column allows fast separations to be performed routinely on a conventional LC system without significant loss in efficiency or resolution. Applications to the HPLC impurity profiling of drug substance candidates were performed using both types of columns to validate this last point.

An HPLC chromatographic reactor approach for investigating the hydrolytic stability of a pharmaceutical compound.

The solution-phase hydrolysis kinetics of the Aprepitant (Emend) prodrug, Fosaprepitant Dimeglumine, were investigated using an HPLC chromatographic reactor approach. The term 'chromatographic reactor' refers to the use of an analytical-scale column as both a flow-through reactor and, simultaneously, as separation medium for the reactant(s) and product(s). Recently, we reported a novel mathematical treatment for the kinetic data obtained from chromatographic reactors, which we believe is superior to other treatments in terms of its accuracy, robustness and ease of implementation. In this work, we demonstrate that our treatment may be applied equally well to HPLC reactors, as previously we studied only GC reactors. It is found that the hydrolysis of Fosaprepitant Dimeglumine (FD) has an apparent activation energy of 107 kJ/mol when the reaction is investigated on-column, using the gradient elution conditions of the validated HPLC impurity profile method for this compound. For comparison, the activation energy determined for the same reaction occurring in a quiescent solution consisting of a fixed ratio of acetonitrile-0.1% v/v aqueous H3PO4 (50:50, v/v) is 91 kJ/mol, calculated using direct application of the Arrhenius equation. The data presented show that, when used as a screening tool, chromatographic reactors may be feasible for use in the pharmaceutical industry to quickly gauge the relative stabilities of various compounds with similar degradation pathways.

Examination of rofecoxib solution decomposition under alkaline and photolytic stress conditions.

Rofecoxib is a highly active and selective cyclo-oxygenase II inhibitor. A stability-indicating method for the assay of rofecoxib has been developed using reverse-phase high-performance liquid chromatography (HPLC). Stress testing of rofecoxib was conducted during the method development and validation. HPLC analysis of rofecoxib solutions stressed under alkaline and photolytic conditions revealed the presence of several degradates. Two main degradates were determined to be the cyclization product formed by photo-cyclization and the dicarboxylate formed by ring opening in the presence of base and oxygen. The identities of these degradates were confirmed by comparison of UV spectra and HPLC retention time with the independently synthesized products. The mechanistic pathways for the formation of these degradates are discussed. Further improvement of the HPLC method's ruggedness has been made based on these studies.