An advanced PdNPs@MoS2 nanocomposite for efficient oxygen evolution reaction in alkaline media.

In response to the increasing availability of hydrogen energy and renewable energy sources, molybdenum disulfide (MoS2)-based electrocatalysts are becoming increasingly important for efficient electrochemical water splitting. This study involves the incorporation of palladium nanoparticles (PdNPs) into hydrothermally grown MoS2via a UV light assisted process to afford PdNPs@MoS2 as an alternative electrocatalyst for efficient energy storage and conversion. Various analytical techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopy (EDS), were used to investigate the morphology, crystal quality, and chemical composition of the samples. Although PdNPs did not alter the MoS2 morphology, oxygen evolution reaction (OER) activity was driven at considerable overpotential. When electrochemical water splitting was performed in 1.0 M KOH aqueous solution with PdNPs@MoS2 (sample-2), an overpotential of 253 mV was observed. Furthermore, OER performance was highly favorable through rapid reaction kinetics and a low Tafel slope of 59 mV dec-1, as well as high durability and stability. In accordance with the electrochemical results, sample-2 showed also a lower charge transfer resistance, which again provided evidence of OER activity. The enhanced OER activity was attributed to a number of factors, including structural, surface chemical compositions, and synergistic effects between MoS2 and PdNPs.

An Efficient Nickel Sulfide@NiO Nanocomposite Catalyst with High Density of Active Sites for the Hydrogen Evolution Reaction in Alkaline Media.

Efficient hydrogen evolution reaction (HER) catalysts based on the earth-abundant materials are highly vital to design practical and environmentally friendly water splitting devices. In this study, we present an optimized strategy for the development of active catalysts for hydrogen evolution reaction HER. The composite catalysts are prepared with the nanosurface of NiO for the deposition of NiS by hydrothermal method. In alkaline electrolyte, the NiS/NiO nanocomposite has shown excellent catalytic HER properties at the low onset potential and small Tafel slope of 72 mVdec-1. A current density of 10 mA/cm² is achieved by the nanocomposite obtained with 0.4 gram of NiO as nanosurface for the deposition of NiS (sample 4) at the cost of 429 mV versus RHE. The sample 4 carries more active sites that allow it to act as excellent HER catalyst. Based on this study, we conclude that increasing the nickel oxide content into composite sample facilitates the HER process. Additionally, a long term HER stability for 10 hours and good durability is also demonstrated by the sample 4. Our findings reveal that the optimization of nickel oxide content in the preparation of catalyst leads to the excellent HER activity for the design of practical water splitting devices and other related applications.

A Low Charge Transfer Resistance CuO Composite for Efficient Oxygen Evolution Reaction in Alkaline Media.

An efficient, simple, environment-friendly and inexpensive cupric oxide (CuO) electrocatalyst for oxygen evolution reaction (OER) is demonstrated. CuO is chemically deposited on the porous carbon material obtained from the dehydration of common sugar. The morphology of CuO on the porous carbon material is plate-like and monoclinic crystalline phase is confirmed by powder X-ray diffraction. The OER activity of CuO nanostructures is investigated in 1 M KOH aqueous solution. To date, the proposed electrocatalyst has the lowest possible potential of 1.49 V versus RHE (reversible hydrogen electrode) to achieve a current density of 20 mA/cm2 among the CuO based electrocatalysts and has Tafel slope of 115 mV dec-1. The electrocatalyst exhibits an excellent long-term stability for 6 hours along with significant durability. The enhanced catalytic active centers of CuO on the carbon material are due to the porous structure of carbon as well as strong coupling between CuO-C. The functionalization of metal oxides or other related nanostructured materials on porous carbon obtained from common sugar provides an opportunity for the development of efficient energy conversion and energy storage systems.

An Efficient and Functional Fe3O4/Co3O4 Composite for Oxygen Evolution Reaction.

The design of efficient, stable, durable and noble metal free electro catalysts for oxygen evolution reaction (OER) are of immediate need, but very challenging task. In this study, iron induction into cobalt oxide (Co3O4) has resulted composite structure by wet chemical method. The iron impurity has brought an electronic disorder into Fe3O4/cobalt oxide composite thereby efficient oxygen evolution reaction is demonstrated. An addition of iron content into composite resulted the alternation of morphology from Nano rods to clusters of nanoparticles. The successive addition of iron into composite system reduced the onset potential of OER as compared to the pristine cobalt oxide. A Tafel slope of 80 mVdec-1 indicates the favorable oxygen evolution reaction kinetics on the sample 4. An over-potential of 370 mV is required to reach a 10 mAcm-2 current density which is acceptable for a nonprecious catalyst. The catalyst is highly durable and stable for 30 hours. Electrochemical impedance spectroscopy further provided a deeper insight on charge transfer resistance and sample 4 has low charge transfer resistance that supported the OER polarization curves. The sample 4 has more electrochemical active surface area of 393.5 cm². These obtained results are exciting and highlighting the importance of composite structure and leave a huge space for the future investigations on composite materials for energy related applications.

Facile doping of nickel into Co3O4 nanostructures to make them efficient for catalyzing the oxygen evolution reaction.

Designing a facile and low-cost methodology to fabricate earth-abundant catalysts is very much needed for a wide range of applications. Herein, a simple and straightforward approach was developed to tune the electronic properties of cobalt oxide nanostructures by doping them with nickel and then using them to catalyze the oxygen evolution reaction (OER) in an aqueous solution of 1.0 M KOH. The addition of a nickel impurity improved the conductivity of the cobalt oxide, and further increased its activity towards the OER. Analytical techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and powder X-ray diffraction (XRD) were used to investigate, respectively, the morphology, composition and crystalline structure of the materials used. The nickel-doped cobalt oxide material showed randomly oriented nanowires and a high density of nanoparticles, exhibited the cubic phase, and contained cobalt, nickel and oxygen as its main elements. The nickel-doped cobalt oxide also yielded a Tafel slope of 82 mV dec-1 and required an overpotential of 300 mV to reach a current density of 10 mA cm-2. As an OER catalyst, it was shown to be durable for 40 h. Electrochemical impedance spectroscopy (EIS) analysis showed a low charge-transfer resistance of 177.5 ohms for the nickel-doped cobalt oxide, which provided a further example of its excellent OER performance. These results taken together indicated that nickel doping of cobalt oxide can be accomplished via a facile approach and that the product of this doping can be used for energy and environmental applications.

Facile efficient earth abundant NiO/C composite electrocatalyst for the oxygen evolution reaction.

Due to the increasing energy consumption, designing efficient electrocatalysts for electrochemical water splitting is highly demanded. In this study, we provide a facile approach for the design and fabrication of efficient and stable electrocatalysts through wet chemical methods. The carbon material, obtained by the dehydration of sucrose sugar, provides high surface area for the deposition of NiO nanostructures and the resulting NiO/C catalysts show higher activity towards the OER in alkaline media. During the OER, a composite of NiO with 200 mg C can produce current densities of 10 and 20 mA cm-2 at a bias of 1.45 V and 1.47 V vs. RHE, respectively. Electrochemical impedance spectroscopy experiments showed the lowest charge transfer resistance and the highest double layer capacitance in the case of the NiO/C composite with 200 mg C. The presence of C for the deposition of NiO nanostructures increases the active centers and consequently a robust electrocatalytic activity is achieved. The obtained results in terms of the low overpotential and small Tafel slope of 55 mV dec-1 for non-precious catalysts are clear indications for the significant advancement in the field of electrocatalyst design for water splitting. This composite material based on NiO/C is simple and scalable for widespread use in various applications, especially in supercapacitors and lithium-ion batteries.

An advanced and efficient Co3O4/C nanocomposite for the oxygen evolution reaction in alkaline media.

The design of efficient nonprecious catalysts for the hydrogen evolution reaction (HER) or the oxygen evolution reaction (OER) is a necessary, but very challenging task to uplift the water-based economy. In this study, we developed a facile approach to produce porous carbon from the dehydration of sucrose and use it for the preparation of nanocomposites with cobalt oxide (Co3O4). The nanocomposites were studied by the powder X-ray diffraction and scanning electron microscopy techniques, and they exhibited the cubic phase of cobalt oxide and porous structure of carbon. The nanocomposites showed significant OER activity in alkaline media, and the current densities of 10 and 20 mA cm-2 could be obtained at 1.49 and 1.51 V versus reversible hydrogen electrode (RHE), respectively. The impedance study confirms favorable OER activity on the surface of the prepared nanocomposites. The nanocomposite is cost-effective and can be capitalized in various energy storage technologies.

A Robust, Enzyme-Free Glucose Sensor Based on Lysine-Assisted CuO Nanostructures.

The production of a nanomaterial with enhanced and desirable electrocatalytic properties is of prime importance, and the commercialization of devices containing these materials is a challenging task. In this study, unique cupric oxide (CuO) nanostructures were synthesized using lysine as a soft template for the evolution of morphology via a rapid and boiled hydrothermal method. The morphology and structure of the synthesized CuO nanomaterial were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The prepared CuO nanostructures showed high potential for use in the electrocatalytic oxidation of glucose in an alkaline medium. The proposed enzyme-free glucose sensor demonstrated a robust response to glucose with a wide linear range and high sensitivity, selectivity, stability, and reproducibility. To explore its practical feasibility, the glucose content of serum samples was successfully determined using the enzyme-free sensor. An analytical recovery method was used to measure the actual glucose from the serum samples, and the results were satisfactory. Moreover, the presented glucose sensor has high chemical stability and can be reused for repetitive measurements. This study introduces an enzyme-free glucose sensor as an alternative tool for clinical glucose quantification.