2-Phosphonobutane-1,2,4,-Tricarboxylic Acid (PBTC): pH-Dependent Behavior Studied by Means of Multinuclear NMR Spectroscopy.

Although 2-phosphonobutane-1,2,4,-tricarboxylic acid, PBTC, has manifold industrial applications, relevant and reliable data on the protonation of PBTC are poor. However, these data are critical parameters for ascertaining PBTC speciation, especially with regard to a sound structural and thermodynamic characterization of its metal ion complexes. A rigorous evaluation of pH-dependent 1H, 13C, and 31P chemical shifts along with accessible scalar spin-spin coupling constants (J) was performed in order to determine the pKa values of PBTC in 0.5 molal NaCl aqueous solution by means of nuclear magnetic resonance (NMR) spectroscopy. The phosphonate group revealed pKa values of 0.90 ± 0.02 and 9.79 ± 0.02, and the pKa values associated with the carboxylic groups are 3.92 ± 0.02, 4.76 ± 0.03, and 6.13 ± 0.03. Supported by DFT-calculated structures revealing strong intramolecular hydrogen bonding, the sequence of deprotonation could be unambiguously determined.

Mild hydrothermally treated brewer's spent grain for efficient removal of uranyl and rare earth metal ions.

The increasing concerns on uranium and rare earth metal ion pollution in the environment require sustainable strategies to remove them from wastewater. The present study reports an eco-friendly approach to convert a kind of protein-rich biomass, brewer's spent grain (BSG), into effective biosorbents for uranyl and rare earth metal ions. The employed method reduces the energy consumption by performing the hydrothermal treatment at a significantly lower temperature (150 °C) than conventional hydrothermal carbonization. In addition, with the aid of the Maillard reaction between carbohydrates and proteins forming melanoidins, further activation processes are not required. Treatment at 150 °C for 16 h results in an altered biosorbent (ABSG) with increased content of carboxyl groups (1.46 mmol g-1) and a maximum adsorption capacity for La3+, Eu3+, Yb3+ (pH = 5.7) and UO2 2+ (pH = 4.7) of 38, 68, 46 and 221 mg g-1, respectively. Various characterization methods such as FT-IR, 13C CP/MAS NMR, SEM-EDX and STA-GC-MS analysis were performed to characterize the obtained material and to disclose the adsorption mechanisms. Aside from oxygen-containing functional groups, nitrogen-containing functional groups also contribute to the adsorption. These results strongly indicate that mild hydrothermal treatment of BSG could be applied as a greener, low-cost method to produce effective adsorbents for uranyl and rare earth metal ion removal.

Thermodynamic and Structural Studies on the Ln(III)/An(III) Malate Complexation.

The complexation of the trivalent lanthanides Nd(III) and Eu(III) and of the actinide Am(III) with malate was studied using a multi-method approach. The combination of structural and thermodynamic studies was required for the interpretation of the stoichiometry and thermodynamic data (log ß0, Δr H0m, Δr S0m, Δr G0m) of the lanthanide/actinide malate complexes leading to a profound molecular understanding of the system. The structure-sensitive methods vibrational spectroscopy and extended X-ray absorption fine structure spectroscopy complemented with quantum-mechanical ab initio molecular dynamics calculations revealed a tridentate ring structure of the respective metal complexes. The metal is coordinated by two carboxylate groups and a hydroxyl group. UV-vis, laser fluorescence, and calorimetric studies consistently yielded two complex species having a 1:1 and a 1:2 (metal/malate) stoichiometry. Parallel factor analysis and iterative transformation factor analysis were applied to decompose experimental spectra into their single components and to determine stability constants. The 1:1 and 1:2 Nd(III) malate complexation constants determined by isothermal titration calorimetry were extrapolated to zero ionic strength using the specific ion interaction theory, yielding log ß10 and log ß20 of about 6 and 9, respectively. The respective complexation enthalpies Δr H0m,1 and Δr H0m,2 showed average values of 5 kJ·mol-1 which are typical for small organic molecules. The comparison of Nd(III) and Am(III) malate complexes showed that the malate binding motif, the speciation, and the thermodynamics can be transferred from lanthanides(III) to actinides(III) supporting the 4f/5f element homology.

The interaction of Eu(III) with organoborates ­ a further approach to understand the complexation in the An/Ln(III)-borate system.

The formation equilibria of salicylatoborate, lactatoborate and 3-hydroxybutyratoborate were studied by means of (11)B NMR spectroscopy. The smaller the pKa of the respective organic acid, the higher is the formation constant of the organoborate. The complexation of Eu(III) with salicylatoborate and lactatoborate was investigated by means of TRLFS (time-resolved laser-induced fluorescence spectroscopy) and (11)B NMR spectroscopy, yielding complexation constants lg ß11° = 2.6-3.2. A Eu(III)-3-hydroxybutyrate complex was characterized by TRLFS and (1)H NMR spectroscopy (lg ß11° = 2.89). DFT calculations of the investigated Eu(III)-organoborates and inorganic Eu(III)-(poly)borates provided information about the Eu(III) coordination (most likely chelate). They support the hypothesis that the complexation of Eu(III) with organic as well as inorganic borate structures containing the binding site "B(OR)4(-)" (R = H, threefold coordinated boron center(s), organic moiety) is comparable.

Formation of a Eu(III) borate solid species from a weak Eu(III) borate complex in aqueous solution.

In the presence of polyborates (detected by (11)B-NMR) the formation of a weak Eu(III) borate complex (lg ß11 ~ 2, estimated) was observed by time-resolved laser-induced fluorescence spectroscopy (TRLFS). This complex is a precursor for the formation of a solid Eu(III) borate species. The formation of this solid in solution was investigated by TRLFS as a function of the total boron concentration: the lower the total boron concentration, the slower is the solid formation. The solid Eu(III) borate was characterized by IR spectroscopy, powder XRD and solid-state TRLFS. The determination of the europium to boron ratio portends the existence of pentaborate units in the amorphous solid.

Americium(iii) and europium(iii) complex formation with lactate at elevated temperatures studied by spectroscopy and quantum chemical calculations.

Thermodynamic parameters for the complex formation of Am(iii) and Eu(iii) with lactate were determined with UV-vis and time-resolved laser-induced fluorescence spectroscopy (TRLFS) in a temperature range between 25 and 70 °C. The reaction enthalpy decreased with increasing ionic strength. ATR FT-IR and NMR spectroscopy in combination with density functional theory (DFT) calculations revealed structural details of the Eu(iii) lactate 1 : 1 complex: a chelating coordination mode of the lactate with a monodentate binding carboxylate group and the hydroxyl group being deprotonated.

Eu(3+)-mediated polymerization of benzenetetracarboxylic acid studied by spectroscopy, temperature-dependent calorimetry, and density functional theory.

Thermodynamic parameters for the complexation of Eu(3+) with pyromellitic acid (1,2,4,5-benzenetetracarboxylic acid, BTC) as a model system for polymerizable metal-complexing humic acids were determined using temperature-dependent time-resolved laser-induced fluorescence spectroscopy (TRLFS) and isothermal titration calorimetry (ITC). At low metal and ligand concentrations (<50 µM Eu(3+), <1 mM BTC), a 1:1 monomeric Eu-BTC complex was identified in the range of 25-60 °C. At elevated concentrations (>500 µM Eu(3+) and BTC) a temperature-dependent polymerization was observed, where BTC monomers are linked via coordinating shared Eu(3+) ions. The two methods lead to comparable thermodynamic data (ΔH = 18.5 ± 1.5/16.5 ± 0.1 kJ mol(-1); ΔS = 152 ± 5/130 ± 5 J mol(-1) K(-1); TRLFS/ITC) in the absence of polymerization. With the onset of polymerization, TRLFS reveals the water coordination number of the lanthanide, whereas calorimetry is superior in determining the thermodynamic data in this regime. Evaluating the heat uptake kinetics, the monomer and polymer formation steps could be separated by "time-resolved" ITC, revealing almost identical binding enthalpies for the sequential reactions. Structural features of the complexes were studied by Fourier-transform infrared (FTIR) spectroscopy in combination with density functional theory (DFT) calculations showing predominantly chelating coordination with two carboxylate groups in the monomeric complex and monodentate binding of a single carboxylate group in the polymeric complex of the polycarboxylate with Eu(3+). The data show that pyromellitic acid is a suitable model for the study of metal-mediated polymerization as a crucial factor in determining the effect of humic acids on the mobility of heavy metals in the environment.

First fluorescence spectroscopic investigation of Am(III) complexation with an organic carboxylic ligand, pyromellitic acid.

For the first time Am(III) complexation with a small organic ligand could be identified and characterized with time-resolved laser-induced fluorescence spectroscopy (TRLFS) at room temperature and trace metal concentration. With pyromellitic acid (1,2,4,5-benzene-tetracarboxylic acid, BTC) as ligand spectroscopic characteristics for the Am-BTC complex system were determined at pH 5.0, an ionic strength of 0.1 M (NaClO4) and room temperature. The fluorescence lifetimes were determined to be 23.2±2.2 ns for Am3+(aq) and 27.2±1.2 ns for the Am-BTC 1:1 complex; the emission maximum for the 5D1-(7)F1 transition is 691 nm for both species. The complex stability constant for the Am-BTC 1:1 complex was calculated to be logß110=5.42±0.16.

Convective instability in a liquid-liquid system due to complexation with a crown ether.

Periodic convective instability has been observed in a biphasic system during the complexation reaction of alkali picrate and dicyclohexano-18-crown-6 which undergoes mass transfer from the hexane phase into the aqueous phase. The convection was visualized by means of precipitated crystals that are formed in both phases by the complexation reaction. The fluid motion was observed with an optical microscope and further analyzed with the particle image velocimetry (PIV) technique. The partition at the extraction of cesium into the organic phase was followed by means of the radioactive isotope (137)Cs. The type of the hydrodynamic instability is governed by the alkali metal expressed via its stability constants for the complex formed. More stable complexes trigger a higher precipitation, thereby favoring a Raleigh-Taylor instability. Complexes with a lower stability constant induce Marangoni cells which show a pulsating character in a cubic container. Depending on the confinement of the experiment cell the fluid motion can also follow a back-and-forth movement. Possible mechanisms for the occurring oscillations are discussed.