Elemental Enrichment of the Exoskeleton in Three Species of Tick (Arachnida: Ixodidae).

Three species of adult hard tick (Ixodidae) were examined with scanning electron microscopy-energy dispersive X-ray spectroscopy to obtain elemental profiles of their exoskeletons and determine the presence of trace elements. The scutum, tarsal claws, chelicerae, and hypostome were examined on females and males of Amblyomma americanum, Dermacentor variabilis, and Ixodes scapularis. The only trace elements present included chlorine, calcium, and sodium. Chlorine was the most abundant trace element and occurred in all examined regions. The chelicerae generally possessed the highest weight percentages of Cl (up to 11.32 ± 1.36%) across all 3 species, although high weight percentages of Cl (up to 8.78 ± 2.77%) were also present in the hypostome teeth of most specimens. All 3 trace elements were present in the hypostome of A. americanum and I. scapularis, but Ca and Na appear to be absent from the teeth of D. variabilis. In general, there were few differences in the elemental profiles of the exoskeletons between the sexes of any species. This study confirms the presence of alkali metals (Na) and alkaline earth metals (Ca) in adult ticks, which are also common in other arachnids; however, the absence of transition metals such as zinc from the exoskeletons of ticks is uncommon and only shared with species of Ricinulei and Opiliones.

Effective Contact Potential of Thin Film Metal-Insulator Nanostructures and Its Role in Self-Powered Nanofilm X-ray Sensors.

We studied the effective contact potential difference (ECPD) of thin film nanostructures and its role in self-powered X-ray sensors, which use the high-energy current detection scheme. We compared the response to kilovoltage X-rays of several nanostructures made of disparate combinations of conductors (Al, Cu, Ta, ITO) and oxides (SiO2, Ta2O5, Al2O3). We measured current-voltage curves in parallel-plate configuration separated by an air gap and determined three characteristic parameters: current at zero voltage bias I0, the voltage offset for zero current ECPD, and saturation current Isat. We found that the metals' ECPD values measured with our technique were higher than the CPD values measured with photoelectron spectroscopy in situ, i.e., no air contact. These differences are related to natural oxidization and to the presence of photo-/Auger-electron current leaking from the high-Z toward the low-Z electrode, as suggested by additional experiments carried out in vacuum. Further, the deposition of the 40-500 nm oxide layer on the surface of metallic substrates strongly affects their contact potential. This technique exploits ionization and charge carrier transport in both solid insulators and in air, and it opens the possibility of measuring the ECPD between metals separated by a solid insulator in a metal-insulator-metal (MIM) configuration. Additionally, we demonstrated that certain configurations of MIM structures are suitable for X-ray detection in self-powered mode.

A general method for the fabrication of graphene-nanoparticle hybrid material.

We describe a simple and general approach to conjugate nanoparticles on pristine graphene. The method takes advantage of the high reactivity of perfluorophenyl nitrene towards the C[double bond, length as m-dash]C bonds in graphene, where perfluorophenyl azide-functionalized nanoparticles are conjugated to pristine graphene through the [2+1] cycloaddition reaction by a fast photoactivation.

Characterization and evaluation of nanoparticle release during the synthesis of single-walled and multiwalled carbon nanotubes by chemical vapor deposition.

Airborne nanoparticles released during the synthesis of single-walled and multi-walled carbon nanotubes were measured and characterized. This study reported the field measurements during the development of carbon nanotube production. Monitoring data were taken and the sampling methods to characterize aerosol release were developed along with the modification of carbon nanotube production in a time period from 2006 to 2009. Particle number concentrations for diameters from 5 nm to 20 microm were measured using the fast mobility particle sizer and the aerodynamic particle sizer; the particles released from the furnace were found to be less than 500 nm in diameter. The morphology and elemental composition of the released nanoparticles were characterized by scanning and transmission electron microscopy and energy dispersive spectroscopy. Different operating conditions of multi-walled carbon nanotubes (MWCNT) production were studied to evaluate their effects on the number and morphology of aerosol particles, and the number of particles released. Carbon nanotube filaments and carbon particles in clusters were found among the released aerosol particles during production of multiwalled carbon nanotubes.

Enhancement of anti-inflammatory property of aspirin in mice by a nano-emulsion preparation.

Aspirin, a non-steroidal anti-inflammatory drug, widely used for its anti-inflammatory properties is associated with several systemic side effects including gastro-intestinal discomfort. Inflammation can be mediated by pro-inflammatory cytokines and, along with various other host factors eventually give rise to edema at the inflamed site. Because of the adverse side effects oftentimes associated with systemic exposure to aspirin, the aim of the present study was to investigate whether the anti-inflammatory property of aspirin would enhance if delivered as nano-emulsion preparation. Nano-emulsion preparations of aspirin prepared with a Microfluidizer Processor were evaluated in the croton-oil-induced ear edema CD-1 mouse model using ear lobe thickness and the accumulation of specific in situ cytokines as biomarkers of inflammation. The results showed that particle size (90 nm) populations of nano-emulsion preparations of aspirin compared to an aspirin suspension (363 nm), significantly decreased (p<0. 05) ear lobe thickness approximately 2 fold greater than the aspirin suspension. In addition, the aspirin nano-emulsion further reduced the auricular levels of IL-1alpha (-37%) and TNFalpha (-69%) compared to the aspirin suspension preparation (p<0.05). The reductions in ear lobe thickness were also significantly associated with accumulated tissue levels of IL-1alpha (r=0.5, p<0.009) and TNFalpha (r=0.7, p<0.0004), respectively. In conclusion, these studies indicate that a nano-emulsion preparation of aspirin significantly improved the anti-inflammatory properties of an aspirin suspension in a CD-1 mouse model of induced inflammation.

Fabrication of a novel micron scale Y-structure-based chiral metamaterial: Simulation and experimental analysis of its chiral and negative index properties in the terahertz and microwave regimes.

In this report, we describe the fabrication of a chiral metamaterial based on a periodic array of Y-shaped Al structures on a dielectric Mylar substrate. The unit cell dimensions of the Y-structure are approximately 100 microm on a side with 8 microm linewidths. The fabricated Y-structure elements are characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Quantitative elemental analyses were carried out on both the Y-structure, comprised of Al and its oxide, as well as adjacent regions of the underlying mylar substrate using the energy dispersive X-ray spectroscopy (EDS) capability of the SEM. Finite-Difference Time-Domain (FDTD) calculations of the negative index of refraction for a 3D wedge of multiple layers of the 2D metamaterials showed that these metamaterials possess double negative (-mu,-epsilon) electromagnetic bulk properties at THz frequencies. The same negative index of refraction was determined for a wedge comprised of appropriately scaled larger Y-structures simulated in the microwave region. This double negative property was confirmed experimentally by microwave measurements on a 3D wedge comprised of stacked and registered Y-structure sheets.

Understanding mercapto ligand exchange on the surface of FePt nanoparticles.

Tailoring the surface of nanoparticles is essential for biological applications of magnetic nanoparticles. FePt nanoparticles are interesting candidates owing to their high magnetic moment. Established procedures to make FePt nanoparticles use oleic acid and oleylamine as the surfactants, which make them dispersed in nonpolar solvents such as hexane. As a model study to demonstrate the modification of the surface chemistry, stable aqueous dispersions of FePt nanoparticles were synthesized after ligand exchange with mercaptoalkanoic acids. This report focuses on understanding the surface chemistry of FePt upon ligand exchange with mercapto compounds by conducting X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) studies. It was found that the mercapto end displaces oleylamine on the Pt atoms and the carboxylic acid end displaces the oleic acid on the Fe atoms, thus exposing carboxylate and thiolate groups on the surface that provide the necessary electrostatic repulsion to form stable aqueous dispersions of FePt nanoparticles.

Osteoblast adhesion and matrix mineralization on sol-gel-derived titanium oxide.

The biological events occurring at the bone-implant interface are influenced by the topography, chemistry and wettability of the implant surface. The surface properties of titanium alloy prepared by either surface sol-gel processing (SSP), or by passivation with nitric acid, were investigated systematically using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and contact angle metrology. The bioreactivity of the substrates was assessed by evaluating MC3T3-E1 osteoblastic cell adhesion, as well as by in vitro formation of mineralized matrix. Surface analysis of sol-gel-derived oxide on Ti6Al4V substrates showed a predominantly titanium dioxide (TiO(2)) composition with abundant hydroxyl groups. The surface was highly wettable, rougher and more porous compared to that of the passivated substrate. Significantly more cells adhered to the sol-gel-coated surface, as compared with passivated surfaces, at 1 and 24h following cell seeding, and a markedly greater number of mineralized nodules were observed on sol-gel coatings. Collectively our results show that the surface properties of titanium alloy can be modified by SSP to enhance the bioreactivity of this biomaterial.