Morphological and Dimensional Analysis of the Nasopalatine Canal: Insights from Cone-Beam Computed Tomography Imaging in a Large Cohort.

BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.

Bibliographic analysis and evaluation of the mesh keywords in the journal of prosthodontics: Implant, esthetic, and reconstructive dentistry.

BACKGROUND: Various studies have been conducted to analyze data via bibliometric analysis in different dentistry, including prosthetic dentistry. However, these studies evaluated the most cited published articles in dentistry. OBJECTIVE: To analyze and evaluate the characteristic development of several mesh keywords in the Journal of Prosthodontics - Implant, Esthetic, and Reconstructive Dentistry between 1992 and 2022. METHODS: The Scopus databases was searched to retrieve the data related to 8 categories, including published articles, most cited documents, authors and organizations, and maximum articles cited during the evaluation period. The data retrieved were exported to a Microsoft Excel sheet and were analyzed using the bibliometrix package. The data were first analyzed for ten years and then for 30 years. The highest of 10 were reported for each category, and co-authorship, reoccurrence, and linked data were also reported. RESULTS: 2603 published documents were recorded from the Scopus databases. Articles comprised 87.9% of the total published work, followed by review articles at 5.46%. The most productive decade was between 2013 and 2022. 3793 terms were used during the evaluation period, with the maximum number in 2003-2012 (2481). A total of 5392 keywords were used during 1992-2022, with the highest number (3232) from 2013 to 2022. A total of 6108 authors were acknowledged, with the maximum number (3964) from 2013 to 2022 and the fewest (767) from 1992 to 2002. Authors from different countries increased from 17 countries in 1992-2002 to 52 countries in 2013-2022 (total = 63 countries). Similarly, the number of organizations increased from 312 organizations in 1992-2002 to 1315 organizations in 2013-2022 (total = 1976 organizations). CONCLUSION: The current bibliometric analysis delivered a comprehensive overview about more spread research topics and its impactful role in contemporary dentistry, especially prosthetic dentistry.

Comparative Analysis of Properties in Chairside Silicone Denture Liners versus Heat-Cured Molloplast-B: An In-Depth In Vitro Evaluation.

BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.

Effects of Blood Contamination and Decontamination Protocol on Reverse Torque Value of Abutment Screws in Dental Implants: An In Vitro Study.

Background and Objective: Loosening of abutment screws in dental implants is a mechanical complication that affects prosthetic treatments and hence, patient satisfaction. Blood contamination of abutment screws may play a role in this phenomenon. However, only limited research attention has been given to this issue. In the present study, we determined the effect of blood contamination and decontamination protocol on the reverse torque value (RTV) of abutment screws. Materials and Methods: A questionnaire-based survey was sent to 210 implantologists requesting feedback on their attitude to the blood contamination issue and the decontamination protocols used. The survey responses were used in a selection of the decontamination solutions that were used in the subsequent in vitro study on the effects of blood decontamination protocol on the RTV of abutment screws. Thus, three study groups were used (n = 20 abutment screws in each group): Group 1 (control group; blood-contaminated screws); Group 2 (screws decontaminated with 5.25% sodium hypochlorite (NaOCl) solution); and Group 3 (screws decontaminated with normal saline solution (0.9%)). Then, each of the connections were subjected to thermocycling, and RTVs of the screw were measured using a digital torque meter. Intragroup and intergroup RTVs were analyzed for significance using analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) tests. Results: 48% of the implantologists responded to the survey; 80% of them were concerned with blood contamination in the implant connection, especially before abutment loading and 85% of them used either chlorhexidine solution or normal saline solution as the decontamination agent. The mean RTV for Group 2 screws (30.27 ± 2.8 N.cm) was significantly greater than that for Group 3 screws (26.02 ± 1.99 N.cm) which, in turn, was significantly greater than that for Group 1 screws (23.64 ± 1.84 N.cm). Conclusion: Decontamination of blood-covered connections using 5.25% NaOCl solution or normal saline solution restores the RTV of abutment screws. This finding may have clinical relevance in that the decontaminated screws may contribute to the low incidence of screw loosening and, ultimately, improved patient satisfaction.

Effect of Effervescent Denture Cleansers on 3D Surface Roughness of Conventional Heat Polymerized, Subtractively, and Additively Manufactured Denture Base Resins: An In Vitro Study.

PURPOSE: To compare the change in surface roughness of denture bases fabricated using three different techniques (additive manufacturing, subtractive manufacturing, and conventional heat-polymerizing) when immersed in two commonly available denture cleansers. MATERIALS AND METHODS: One hundred and seventeen disc-shaped denture base specimens (39/group), were fabricated by subtractive manufacturing (Wieland), additive manufacturing (NextDent Denture 3D+), and conventional heat-polymerizing (Meliodent) techniques, following the manufacturers' instructions. Specimens were randomly divided into 3 groups and immersed in two effervescent denture cleansing solutions and distilled water to simulate 180 days of denture cleansing. A 3D optical noncontact surface profilometer was used to record the surface roughness of the tested denture base materials before and after immersion. Two-way ANOVA, followed by Bonferroni post hoc test, was used to assess the effects of denture cleansers on surface roughness of tested denture base resins. RESULTS: When immersed in Fixodent and Fittydent effervescent denture cleansing solutions, the highest change in absolute surface roughness (∆Sa, in µm) was observed in additively manufactured denture base material (0.181 ±0.018 and 0.079 ±0.008), followed by heat-polymerized denture base material (0.149 ±0.012 and 0.059 ± 0.011), while subtractively manufactured denture base material showed the least change (0.110 ±0.026 and 0.038 ±0.007), respectively. There was a difference in the extent of change in surface roughness between the denture cleansers. The change in surface roughness was much higher with the Fixodent denture cleanser as compared to the Fittydent denture cleanser. CONCLUSION: Subtractively manufactured denture base resin displayed the lowest change while additively manufactured denture base resin displayed the highest change in surface roughness in both denture cleansers, but the extent of change in surface roughness was variable.

Influence of Bariatric Surgery on Oral Microbiota: A Systematic Review.

The study aims to systematically review the available literature to evaluate the changes in oral microbiota in patients after bariatric surgery (BS) and correlates these alterations in microorganisms with common oral manifestations. Relevant Electronic databases were systematically searched for indexed English literature. The Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines were followed for framework designing, application, and reporting of the current systematic review. The focused PICO question was: "Is there any change in oral microbiota (O) of patients (P) who underwent BS (I) when compared with non-BS groups (C)?' Seven articles were selected for qualitative synthesis. On application of the National Institutes of Health (NIH) quality assessment tool, six studies were found to be of fair quality and one was of good quality. All the seven included studies evaluated the effect of BS on oral microbiota in humans. The outcomes of this review suggest that considerable changes take place in oral microbiota after BS which can be correlated with common oral manifestations. These changes are mainly due to the indirect effect of BS and may vary with the individuals. Due to variations in the included studies, it is difficult to proclaim any persistent pattern of oral microbiota found after BS.

A Prospective Study to Assess Patients' Understanding and Retention of Postoperative Instructions following a Fixed Partial Denture, Using Different Information Delivery Techniques.

OBJECTIVE: This study was aimed to evaluate the effect of using different modes of at-home maintenance information delivery on patients' understanding and the level of information retention. MATERIALS AND METHODS: Sixty patients were asked to answer a questionnaire while undergoing mouth preparations for receiving a fixed partial denture. The questionnaire includes questions related to at-home maintenance procedures and recall visits. After finishing the first questionnaire, these patients were randomly assigned into three groups, and each group was given education about at-home maintenance procedures and recall visits by different means. Group 1 participants were educated by giving live demonstrations. Group 2 participants were shown a prerecorded video, whereas group 3 participants were given written instructions. All Participants were recalled after 1 week of the last visit and were asked to fill out the same questionnaire. STATISTICAL ANANLYSIS: Collected data were tabulated in a Microsoft Excel Spreadsheet and were analyzed using the Chi-square test, one-way ANOVA, paired t-test, and post hoc Bonferroni test. A p-Value < 0.05 was regarded as statistically significant for all the analyses. RESULTS: Group 1 showed greatest information retention as compared with groups 2 and 3 (p = 0.045). There was significant difference in the knowledge of group 1 as compared with groups 2 (p = 0.020) and 3 (p = 0.048). CONCLUSION: The mode of delivering postoperative instructions after fixed partial denture treatment does have an effect on the patient understanding level and information retention. Patients who were given live demonstrations showed the best results compared with video recordings and written leaflets.

A Radiographic Study of the Root-to-Crown Ratio of Natural Permanent Teeth in 81 Saudi Adults.

BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.

Effects of the Cervical Marginal Relocation Technique on the Marginal Adaptation of Lithium Disilicate CAD/CAM Ceramic Crowns on Premolars.

AIM AND OBJECTIVE: To evaluate the effect of cervical margin relocation (CMR) for crowns designed using CAD/CAM technology and fabricated from lithium disilicate (e.max, CAD) before and after aging; and to compare the fracture forces and failure type of the tested crowns. MATERIALS AND METHODS: Mesio-occluso-distal(MOD) cavities 1 mm above the cementoenamel junction(CEJ) were prepared on 40 maxillary first premolars. The teeth were divided into four groups. In group A, all cervical margins (CM) were located 1 mm above the CEJ. However, in both mesial and distal proximal boxes of groups B, C, and D, in addition to the MOD cavities, the CMs were extended 2 mm on both sides below the CEJ apically to simulate the CMR technique. In group B, the mesial and distal proximal boxes were filled with flowable composite, while for group C and group D, specimens were filled with composite resin fillings. To simulate the CMR technique, the cavities were filled with composite layers of 3 mm in two increments. Using the CAD/CAM system, 40 standard crowns were prepared on premolars, then cemented using a dual-curing adhesive cement. Assessments of the marginal integrity of interfaces of the proximal boxes of the cemented crowned teeth were recorded. Statistical differences between groups were analyzed using the ANOVA and Bonferroni's posthoc test. RESULTS: The first null hypothesis was accepted since no statistically significant differences were found in marginal integrity before and after aging (p>0.05), while the second was partially rejected since different fractured force values were recorded and a significant difference was detected between group D and group B. The third hypothesis was rejected because the catastrophic fracture rate was the highest among the four groups. CONCLUSION: The implementation of CMR before and after aging had a good effect on the marginal integrity of CM relocation. The CMR technique with resin luting cement of lithium disilicate crowns is effective and recommended for the restoration in deep proximal boxes of premolars or posterior teeth. CLINICAL SIGNIFICANCE: CAD/CAM-generated e. max all-ceramic crowns with composite as the CMR enable the reconstruction of severely destroyed teeth irrespective of the position of the cavity margins.

Assessment of Color Stainability of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Ceramic Materials After Hot and Cold Coffee Immersion at Different Time Intervals.

BACKGROUND This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. MATERIAL AND METHODS Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee. Color of specimens was measured during immersion in staining materials (BEFORE) as baseline with (Vita classic) and (L, a, b), for average color changes (ΔE00), then remeasured after 2, 4, and 12 weeks, and described as 1st, 2nd, and 3rd measurements for VITAPAN Classic shade and T1, T2, and T3 for ΔE00 values using the CIE L*a*b* equation. We performed ANOVA and then post hoc testing. RESULTS We found significant differences in ΔE00 values during immersing in hot Arabic Qahwa and cold coffee for tested materials in glazed or polished specimens. Polished specimens of Vita-S and Vita-E had the highest color changing and staining compared to glazed surfaces. Vitablocs-MII had the best color stability through immersion periods. Moreover, there were changes in relation to VITAPAN Classic shade guide for both Vita-S and Vita-E specimens during different immersion periods. CONCLUSIONS Coffee caused staining and contamination of ceramic material. Values of ΔE00 for tested ceramic materials were significantly different but were within the clinically acceptable range. Polished specimens showed higher staining; therefore, we highly recommend re-glazing of ceramic restorations to maintain color stability.

Dental Anxiety and Fear among Patients in Jazan, Kingdom of Saudi Arabia: A Cross-sectional Study.

AIM: The current study aims to address the patient's dental anxiety (DA) And dental fear (DF) under the treatment of a general practitioner (GP) among different parameters. MATERIALS AND METHODS: The cross-sectional study included 500 patients recruited from different clinics in Jazan, Saudi Arabia. Data were collected through a questionnaire-based form consisting of three parts; the first part was personal and demographic questions whereas the second and third parts were a modified dental anxiety scale (MDAS) and a dental fear survey (DFS) to measure DA and DF among patients. Spearman's correlation was used to measure the relation between DA and DF as well as Chi-square tests and logistic regression analyses for analyzing the effect of each variable on DA and DF. RESULTS: All patients fulfilled their eligibility criteria. A high percentage was found in moderate anxiety (36.8%) as well as in moderate fear (46.2%) among different anxiety and fear scales. The association between DA and DF was positively significant (p <0.01). There was a significant effect of gender, age, education, khat use, marital status, monthly income, and type of clinic on patients' DA and DF. CONCLUSIONS: There is a positive relation between MDAS and DFS, thus the DA affects the DF. Female patients had a lower DA and DF than male patients. Furthermore, the government clinics had the highest DA and DF prevalence levels for patients. Moreover, the high school-graduated patients seem to have a high DA and DF vs other patient educational levels. CLINICAL SIGNIFICANCE: It would be beneficial to include an educational training program about psychological patient management in the study curriculum as well as to be offered as a special course to newly graduated dentists. This modification will aid to improve the GPs to get rid of DA and DF patients. How to cite this article: AlDhelai TA, Al-Ahmari MM, Adawi HA, et al. Dental Anxiety and Fear among Patients in Jazan, Kingdom of Saudi Arabia: A Cross-sectional Study. J Contemp Dent Pract 2021;22(5):549-556.

A Comparison of Undergraduate Prosthodontic Teaching of Removable Partial Dentures in Saudi Arabian Dental Colleges with North American and Turkish Dental Schools.

OBJECTIVES: To meet the needs of society, it is obligatory to provide standardized skill training to undergraduate students in dental colleges. Surveys related to teaching curriculum are valuable means to evaluate education across the country. The aim of this study was to find the trends in the undergraduate teaching curriculum, by determining the differences in the teaching methods and principles of fabrication of removable partial dentures in dental colleges in Saudi Arabia and to compare these with the curriculum of North American dental schools and Turkish dental schools. MATERIALS AND METHODS: An online survey was conducted in 23 dental colleges of Saudi Arabia. Descriptive data analysis was performed to synopsize the information. RESULTS: Eighteen out of 23 (78.23%) dental colleges of Saudi Arabia answered the questionnaire; 88.9% of the colleges follow the practice of using custom trays for making final impressions; and 44.4% of the colleges use only polyvinyl siloxane for making final impressions. Semiadjustable articulators were commonly used for mounting study casts (61.1%) and master casts (66.6%). An in-house production laboratory is present in 72.2% of the colleges. Cobalt-chromium alloy is used in 94.4% of the colleges for the framework. A set protocol for postinsertion adjustment visits is followed in 94.4% of the colleges. CONCLUSIONS: Dental colleges of Saudi Arabia have similar standards of removable partial denture education at the undergraduate level, with variations in a few aspects. Removable partial denture teaching programs of Saudi Arabian dental colleges are comparable to similar programs in dental schools of the United States and Turkey.

Use of a Rotational Flap with Soft Tissue Graft and Tunneling Technique for Ovate Pontic Site Development for a Highly Esthetic Outcome: A Case Report.

AIM AND OBJECTIVE: The objective of therapy was to replace the missing teeth with a restoration that closely adhered to the natural teeth and soft tissue contour to provide an esthetic outcome. CASE DESCRIPTION: A 19-year-old male reported a failed fixed partial denture (FPD) in the maxillary left central incisor. The abutment extended to the maxillary right central incisor and the maxillary left lateral incisor. Radiographic examination revealed that the neighboring maxillary right central incisor abutment was nonrestorable. The treatment plan was the extraction of the maxillary right central incisor with socket preservation, modification of the pontic sites for placement of an ovate pontic for the replacement of the missing maxillary upper central incisors with an FPD with the maxillary lateral incisors serving as the abutment teeth. The pontic sites were corrected with a U-shaped flap extended 5 mm palatal from the mid-crestal line. The incision was avoided at the interdental papilla area. The facial flap was elevated. The facial soft tissue was vertically tunneled. The flap was flipped into the facial tunnel and stabilized with horizontal nylon matrix sutures. The surgical site was stabilized with a provisional FPD with an ovate pontic. The final restoration was a full zirconia facial veneered FPD. RESULTS: Surgical site showed significant healing with a natural emergence profile, and interdental papillae filling the gingival embrasure, showing no evidence of recession. At the 1-year follow-up, the gingival thickness improved and the pontic emergence profile was natural. A very stable result for soft tissue volume and interdental papillae were seen. CONCLUSION: According to the result obtained with rotational flap, it can be used for small anterior defects with promising results, without the need for bone graft procedures or additional tissue graft. CLINICAL SIGNIFICANCE: With proper case selection, the use of a rotational flap with a tunnel technique and an ovate pontic in the anterior esthetic region is an alternative treatment option that can successfully restore masticatory and esthetic function.

A Less-Invasive Window Design for Lateral Wall Maxillary Sinus Augmentations.

The purpose of this article is to compare the larger (8 × 10-mm single implant and 15 × 20-mm multiple implant) lateral window designs used in the sinus elevation procedure with a newly proposed, less-invasive window design and discuss the advantages and limitations of the new design. The less-invasive window designs differ from the larger window designs in both the size and shape of lateral windows. Following creation of a round-window osteotomy, the quality of the sinus membrane and its ability to be elevated are assessed. The initial window can then be enlarged as a vertical oval window for a single implant or a horizontal oval window for multiple implants. The advantages of these window designs include the preservation of the lateral walls, blood supply to bone grafts, and better containment of the graft material. The limitations of these window designs are decreased visibility, accessibility for correcting a membrane perforation, and access for draining a sinus infection if one occurs. These complications necessitate increasing the size of the window as needed for successful treatment. The proposed less-invasive window design provides distinct advantages for a successful sinus elevation procedure and decreased patient morbidity.

Anterior Tooth Replacement with an Implant in a Grafted Alveolar Cleft Site: Case Report with a 10-Year Follow-up.

The aim of this report is to present a case with a 10-year follow-up of a single anterior tooth dental implant replacement with a xenogenous bone graft in a patient with a large bone defect associated with a cleft lip and palate. At 10 years postloading, the implant was healthy and well-integrated. Although the implant restoration appeared slightly intruded due to growth and development at that time, the patient was happy with the esthetic result and refused corrections of the uneven occlusal plane.