Standoff trace explosives vapor detection at meter distances.

Vapor detection is a noncontact sampling method, which is a less invasive means of explosives screening than physical swiping. Explosive vapor detection is a challenge due to the low levels of vapors available for detection. This study demonstrates that the parts-per-quadrillion sensitivity of atmospheric flow tube-mass spectrometry (AFT-MS) combined with a high-volume air sampler enables standoff detection of trace explosives vapor at distances of centimeters to meters. Standoff detection of explosives vapor was possible both upstream and downstream of the vapor source relative to room air currents. RDX vapor from a saturated source was detected at up to 2.5 m. Vapors from RDX residue and nitroglycerin residue were detected at distances up to 0.5 m. The sampling can be optimized by accounting for air movement in the room or environment, which could further extend standoff detection distances. Using AFT-MS with a high-volume sampler could also be effective for standoff vapor detection of drugs and additional chemical threats and could be useful for security screening applications such as at mail facilities, border crossings, and security checkpoints.

Rapid nondestructive measurement of bacterial cultures with 3D interferometric imaging.

The agar culture plate has played a crucial role in bacteriology since the origins of the discipline and is a staple bioanalytical method for efforts ranging from research to standard clinical diagnostic tests. However, plating, inoculating, and waiting for microbes to develop colonies that are visible is time-consuming. In this work, we demonstrate white-light interferometry (WLI) as a practical tool for accelerated and improved measurement of bacterial cultures. High resolution WLI surface profile imaging was used for nondestructive characterization and counting of bacterial colonies on agar before they became visible to the naked eye. The three-dimensional (3D) morphology of Gram-negative (Pseudomonas fluorescens) and Gram-positive (Bacillus thuringiensis) bacterial species were monitored with WLI over time by collecting surface profiles of colonies on agar plates with high vertical resolution (3-5 nanometers) and large field of view (3-5 mm). This unique combination of sensitive vertical resolution and large field of view uniquely provided by WLI enables measurement of colony morphologies and nondestructive monitoring of hundreds of microcolonies. Individual bacteria were imaged within the first few hours after plating and colonies were accurately counted with results comparing favorably to counts made by traditional methods that require much longer wait times. Nondestructive imaging was used to track single cells multiplying into small colonies and the volume changes over time in these colonies were used to measure their growth rates. Based on the results herein, bioimaging with WLI was demonstrated as a novel rapid bacterial culture assay with several advantageous capabilities. Fast nondestructive counting of colony-forming units in a culture and simultaneous measurement of bacterial growth rates and colony morphology with this method may be beneficial in research and clinical applications where current methods are either too slow or are destructive.

Monitoring bacterial biofilms with a microfluidic flow chip designed for imaging with white-light interferometry.

There is a need for imaging and sensing instrumentation that can monitor transitions in a biofilm structure in order to better understand biofilm development and emergent properties such as anti-microbial resistance. Herein, we describe the design, manufacture, and use of a microfluidic flow cell to visualize the surface structure of bacterial biofilms with white-light interferometry (WLI). The novel imaging chip enabled the use of this non-disruptive imaging method for the capture of high resolution three-dimensional profile images of biofilm growth over time. The fine axial resolution (3 nm) and the wide field of view (>1 mm by 1 mm) enabled the detection of biofilm formation as early as 3 h after inoculation of the flow cell with a live bacterial culture (Pseudomonas fluorescens). WLI imaging facilitated the monitoring of the early stages of biofilm development and subtle variations in the structure of mature biofilms. Minimally-invasive imaging enabled the monitoring of biofilm structure with surface metrology metrics (e.g., surface roughness). The system was used to observe a transition in the biofilm structure that occurred in response to exposure to a common antiseptic. In the future, WLI and the biofilm imaging cell described herein may be used to test the effectiveness of biofilm-specific therapies to combat common diseases associated with biofilm formation such as cystic fibrosis and periodontitis.

Magnetic iron oxide nanoparticles for the collection and direct measurement of adsorbed alpha-emitting radionuclides from environmental waters by liquid scintillation analysis.

Radioactive contamination, be it from accidental or intentional release, can create an urgent need to assess water and food supplies and the environment, and monitor human health. In the event of such an emergency, rapid and efficient methods may be needed to assess contamination levels in scores of samples within a short time frame. Internalized exposure to radionuclides that decay by alpha (α) emission can be especially hazardous, given the strongly ionizing nature of the α particle. Unfortunately, the determination of α-emitting radionuclides using traditional radioanalytical methods is typically labor and resource intensive and time consuming. In an effort to devise methods that are fast, require little labor and laboratory expendables, and minimize the use of toxic or corrosive reagents, researchers at PNNL have evaluated superparamagnetic nanoparticles as extracting agents for α-emitting radionuclides from chemically unmodified and acidified (pH 2) aqueous systems. It is demonstrated that bare magnetite nanoparticles exhibit strong affinity for two representative α-emitting radionuclides (241Am and 210Po) from two representative aqueous matrices (river and ground water). Furthermore, use of the superparamagnetic properties of these nanomaterials to concentrate the analyte-bearing solids from the bulk aqueous solution has been demonstrated. The nanoparticle concentrate can be either directly dispensed into a scintillation cocktail, or first dissolved and then added to a scintillation cocktail as a solution for an α-emission assay by liquid scintillation analysis. Despite the severe quenching caused by the metal oxide suspensions in the cocktail, the authors have demonstrated that modern liquid scintillation analyzers can report accurate α activity count rates; the upper limits of nanoparticle suspension concentrations in a cocktail are reported for cases wherein normal instrument count mode and a quench correction protocol are used. Discussions are provided on the presented sample processing and analysis method, the improvement (lowering) of minimum detectable activity concentrations using the nanoparticle-based assay method, and the quenching effects of nanoparticle suspensions in a scintillation cocktail.

Surface functionalized nanostructured ceramic sorbents for the effective collection and recovery of uranium from seawater.

The ability to collect uranium from seawater offers the potential for a nearly limitless fuel supply for nuclear energy. We evaluated the use of functionalized nanostructured sorbents for the collection and recovery of uranium from seawater. Extraction of trace minerals from seawater and brines is challenging due to the high ionic strength of seawater, low mineral concentrations, and fouling of surfaces over time. We demonstrate that rationally assembled sorbent materials that integrate high affinity surface chemistry and high surface area nanostructures into an application relevant micro/macro structure enables collection performance that far exceeds typical sorbent materials. High surface area nanostructured silica with surface chemistries composed of phosphonic acid, phosphonates, 3,4 hydroxypyridinone, and EDTA showed superior performance for uranium collection. A few phosphorous-based commercial resins, specifically Diphonix and Ln Resin, also performed well. We demonstrate an effective and environmentally benign method of stripping the uranium from the high affinity sorbents using inexpensive nontoxic carbonate solutions. The cyclic use of preferred sorbents and acidic reconditioning of materials was shown to improve performance. Composite thin films composed of the nanostructured sorbents and a porous polymer binder are shown to have excellent kinetics and good capacity while providing an effective processing configuration for trace mineral recovery from solutions. Initial work using the composite thin films shows significant improvements in processing capacity over the previously reported sorbent materials.

Uniform deposition of uranium hexafluoride (UF6): Standardized mass deposits and controlled isotopic ratios using a thermal fluorination method.

We report a convenient method for the generation of volatile uranium hexafluoride (UF6) from solid uranium oxides and other U compounds, followed by uniform deposition of low levels of UF6 onto sampling coupons. Under laminar flow conditions, UF6 is shown to interact with surfaces within a fixed reactor geometry to a highly predictable degree. We demonstrate the preparation of U deposits that range between approximately 0.01 and 500ngcm(-2). The data suggest the method can be extended to creating depositions at the sub-picogramcm(-2) level. The isotopic composition of the deposits can be customized by selection of the U source materials and we demonstrate a layering technique whereby two U solids, each with a different isotopic composition, are employed to form successive layers of UF6 on a surface. The result is an ultra-thin deposit that bears an isotopic signature that is a composite of the two U sources. The reported deposition method has direct application to the development of unique analytical standards for nuclear safeguards and forensics. Further, the method allows access to very low atomic or molecular coverages of surfaces.

Magnetic iron oxide and manganese-doped iron oxide nanoparticles for the collection of alpha-emitting radionuclides from aqueous solutions.

Magnetic nanoparticles are well known to possess chemically active surfaces and large surface areas that can be employed to extract a range of ions from aqueous solutions. Additionally, their superparamagnetic properties provide a convenient means for bulk collection of the material from solution after the targeted ions have been adsorbed. Herein, two nanoscale amphoteric metal oxides, each possessing useful magnetic attributes, were evaluated for their ability to collect trace levels of a chemically diverse range of alpha emitting radioactive isotopes (polonium (Po), radium (Ra), uranium (U), and americium (Am)) from a wide range of aqueous solutions. The nanomaterials include commercially available magnetite (Fe3O4) and magnetite modified to incorporate manganese (Mn) into the crystal structure. The chemical stability of these nanomaterials was evaluated in Hanford Site, WA ground water between the natural pH (~8) and pH 1. Whereas the magnetite was observed to have good stability over the pH range, the Mn-doped material was observed to leach Mn at low pH. The materials were evaluated in parallel to characterize their uptake performance of the alpha-emitting radionuclide spikes from ground water across a range of pH (from ~8 down to 2). In addition, radiotracer uptake experiments were performed on Columbia River water, seawater, and human urine at their natural pH and at pH 2. Despite the observed leaching of Mn from the Mn-doped nanomaterial in the lower pH range, it exhibited generally superior analyte extraction performance compared to the magnetite, and analyte uptake was observed across a broader pH range. We show that the uptake behavior of the various radiotracers on these two materials at different pH levels can generally be explained by the amphoteric nature of the nanoparticle surfaces. Finally, the rate of sorption of the radiotracers on the two materials in unacidified ground water was evaluated. The uptake curves generally indicate that equilibrium is obtained within a few minutes, which is attributed to the high surface areas of the nanomaterials and the high level of dispersion in the liquids. Overall, the results indicate that these nanomaterials may have the potential to be employed for a range of applications to extract radionuclides from aqueous solutions.

Fourier-transform infrared spectroscopy for rapid screening and live-cell monitoring: application to nanotoxicology.

A significant challenge to realize the full potential of nanotechnology for therapeutic and diagnostic applications is to understand and evaluate how live cells interact with an external stimulus, such as a nanosized particle, and the toxicity and broad risk associated with these stimuli. It is difficult to capture the complexity and dynamics of these interactions by following omics-based approaches exclusively, which can be expensive and time-consuming. Attenuated total reflectance-Fourier transform infrared spectroscopy is well suited to provide noninvasive live-cell monitoring of cellular responses to potentially toxic nanosized particles or other stimuli. This alternative approach provides the ability to carry out rapid toxicity screenings and nondisruptive monitoring of live-cell cultures. We review the technical basis of the approach, the instrument configuration and interface with the biological media, the various effects that impact the data, subsequent data analysis and toxicity, and present some preliminary results on live-cell monitoring.

Robotic-assisted transabdominal cerclage (RoboTAC) in the non-pregnant patient.

The use of cerclage, either through vaginal or abdominal routes, to assist in delaying pre-term delivery among select women with cervical insufficiency may be beneficial, but can also carry significant morbidity. Robotic-assisted transabdominal cervical cerclage (RoboTAC) in the non-pregnant patient has the ability to not only reduce associated morbidity, but also offer the same benefits as the more traditional laparotomy and laparoscopic approaches, while removing the risk to an in situ fetus. We report the use of robotic-assisted transabdominal cervical cerclage in 24 non-pregnant women. Feasibility of the procedure is discussed along with a description of the technical surgical details. In addition, limited pregnancy outcomes are presented. Our results suggest that RoboTAC is a safe alternative to the traditional laparotomy procedure with quicker recovery time.

Improved deposition and deprotection of silane tethered 3,4 hydroxypyridinone (HOPO) ligands on functionalized nanoporous silica.

An improved synthesis of a 3,4 hydroxypyridinone (HOPO) functionalized mesoporous silica is described. Higher 3,4-HOPO monolayer ligand loadings have been achieved, resulting in better performance. Performance improvements were demonstrated with the capture of U(VI) from human blood, plasma and filtered river water.

Manganese doping of magnetic iron oxide nanoparticles: tailoring surface reactivity for a regenerable heavy metal sorbent.

A method for tuning the analyte affinity of magnetic, inorganic nanostructured sorbents for heavy metal contaminants is described. The manganese-doped iron oxide nanoparticle sorbents have a remarkably high affinity compared to the precursor material. Sorbent affinity can be tuned toward an analyte of interest simply by adjustment of the dopant quantity. The results show that following the Mn doping process there is a large increase in affinity and capacity for heavy metals (i.e., Co, Ni, Zn, As, Ag, Cd, Hg, and Tl). Capacity measurements were carried out for the removal of cadmium from river water and showed significantly higher loading than the relevant commercial sorbents tested for comparison. The reduction in Cd concentration from 100 ppb spiked river water to 1 ppb (less than the EPA drinking water limit of 5 ppb for Cd) was achieved following treatment with the Mn-doped iron oxide nanoparticles. The Mn-doped iron oxide nanoparticles were able to load ~1 ppm of Cd followed by complete stripping and recovery of the Cd with a mild acid wash. The Cd loading and stripping is shown to be consistent through multiple cycles with no loss of sorbent performance.

Magnetic mesoporous materials for removal of environmental wastes.

We have synthesized two different magnetic mesoporous materials that can be easily separated from aqueous solutions by applying a magnetic field. Synthesized magnetic mesoporous materials, Mag-SBA-15 (magnetic ordered mesoporous silica) and Mag-OMC (magnetic ordered mesoporous carbon), have a high loading capacity of contaminants due to high surface area of the supports and high magnetic activity due to the embedded iron oxide particles. Application of surface-modified Mag-SBA-15 was investigated for the collection of mercury from water. The mercury adsorption using Mag-SBA-15 was rapid during the initial contact time and reached a steady-state condition, with an uptake of approximately 97% after 7h. Application of Mag-OMC for collection of organics from water, using fluorescein as an easily trackable model analyte, was explored. The fluorescein was absorbed into Mag-OMC within minutes and the fluorescent intensity of solution was completely disappeared after an hour. In another application, Mag-SBA-15 was used as a host of tyrosinase, and employed as recyclable catalytic scaffolds for tyrosinase-catalyzed biodegradation of catechol. Crosslinked tyrosinase in Mag-SBA-15, prepared in a two step process of tyrosinase adsorption and crosslinking, was stable enough for catechol degradation with no serious loss of enzyme activity. Considering these results of cleaning up water from toxic inorganic and organic contaminants, magnetic mesoporous materials have a great potential to be employed for the removal of environmental contaminants and potentially for the application in large-scale wastewater treatment plants.

Investigation of magnetic nanoparticles for the rapid extraction and assay of alpha-emitting radionuclides from urine: demonstration of a novel radiobioassay method.

In the event of an accidental or intentional release of radionuclides into a populated area, massive numbers of people may require radiobioassay screening as triage for dose-reduction therapy or identification for longer-term follow-up. If the event released significant levels of beta- or alpha-emitting radionuclides, in vivo assays would be ineffective. Therefore, highly efficient and rapid analytical methods for radionuclide detection from submitted spot urine samples (≤50 mL) would be required. At present, the quantitative determination of alpha-emitting radionuclides from urine samples is highly labor intensive and requires significant time to prepare and analyze samples. Sorbent materials that provide effective collection and enable rapid assay could significantly streamline the radioanalytical process. The authors have demonstrated the use of magnetic nanoparticles as a novel method of extracting media for four alpha-emitting radionuclides of concern (polonium, radium, uranium and americium) from chemically-unmodified and pH-2 human urine. Herein, the initial experimental sorption results are presented along with a novel method that uses magnetic nanoparticles to extract radionuclides from unmodified human urine and then collect the magnetic field-induced particles for subsequent alpha-counting-source preparation. Additionally, a versatile human dose model is constructed that determines the detector count times required to estimate dose at specific protective-action thresholds. The model provides a means to assess a method's detection capabilities and uses fundamental health physics parameters and actual experimental data as core variables. The modeling shows that, with effective sorbent materials, rapid screening for alpha-emitters is possible with a 50-mL urine sample collected within 1 wk of exposure/intake.

Functionalized nanoporous silica for the removal of heavy metals from biological systems: adsorption and application.

Surface-functionalized nanoporous silica, often referred to as self-assembled monolayers on mesoporous supports (SAMMS), has previously demonstrated the ability to serve as very effective heavy metal sorbents in a range of aquatic and environmental systems, suggesting that they may be advantageously utilized for biomedical applications such as chelation therapy. Herein we evaluate surface chemistries for heavy metal capture from biological fluids, various facets of the materials' biocompatibility, and the suitability of these materials as potential therapeutics. Of the materials tested, thiol-functionalized SAMMS proved most capable of removing selected heavy metals from biological solutions (i.e., blood, urine, etc.) Consequentially, thiol-functionalized SAMMS was further analyzed to assess the material's performance under a number of different biologically relevant conditions (i.e., variable pH and ionic strength) to gauge any potentially negative effects resulting from interaction with the sorbent, such as cellular toxicity or the removal of essential minerals. Additionally, cellular uptake studies demonstrated no cell membrane permeation by the silica-based materials generally highlighting their ability to remain cellularly inert and thus nontoxic. The results show that organic ligand functionalized nanoporous silica could be a valuable material for a range of detoxification therapies and potentially other biomedical applications.

Functional sorbents for selective capture of plutonium, americium, uranium, and thorium in blood.

Self-assembled monolayer on mesoporous supports (SAMMS) are hybrid materials created from attachment of organic moieties onto very high surface area mesoporous silica. SAMMS with surface chemistries including three isomers of hydroxypyridinone, diphosphonic acid, acetamide phosphonic acid, glycinyl urea, and diethylenetriamine pentaacetate (DTPA) analog were evaluated for chelation of actinides ((239)Pu, (241)Am, uranium, thorium) from blood. Direct blood decorporation using sorbents does not have the toxicity or renal challenges associated with traditional chelation therapy and may have potential applications for critical exposure cases, reduction of nonspecific dose during actinide radiotherapy, and for sorbent hemoperfusion in renal insufficient patients, whose kidneys clear radionuclides at a very slow rate. Sorption affinity (K(d)), sorption rate, selectivity, and stability of SAMMS were measured in batch contact experiments. An isomer of hydroxypyridinone (3,4-HOPO) on SAMMS demonstrated the highest affinity for all four actinides from blood and plasma and greatly outperformed the DTPA analog on SAMMS and commercial resins. In batch contact, a fifty percent reduction of actinides in blood was achieved within minutes, and there was no evidence of protein fouling or material leaching in blood after 24 h. The engineered form of SAMMS (bead format) was further evaluated in a 100-fold scaled-down hemoperfusion device and showed no blood clotting after 2 h. A 0.2 g quantity of SAMMS could reduce 50 wt.% of 100 ppb uranium in 50 mL of plasma in 18 min and that of 500 dpm mL(-1) in 24 min. 3,4-HOPO-SAMMS has a long shelf-life in air and at room temperature for at least 8 y, indicating its feasibility for stockpiling in preparedness for an emergency. The excellent efficacy and stability of SAMMS materials in complex biological matrices suggest that SAMMS can also be used as orally administered drugs and for wound decontamination. By changing the organic groups of SAMMS, they can be used not only for actinides but also for other radionuclides. By using the mixture of these SAMMS materials, broad spectrum decorporation of radionuclides is very feasible.

In vitro and in vivo evaluation of a novel ferrocyanide functionalized nanopourous silica decorporation agent for cesium in rats.

Novel decorporation agents are being developed to protect against radiological terrorist attacks. These sorbents, known as the self-assembled monolayer on mesoporous supports (SAMMS), are hybrid materials where differing organic moieties are grafted onto mesoporous silica (SiO(2)). In vitro experiments focused on the evaluation and optimization of SAMMS for capturing radiocesium ((137)Cs); therefore, based on these studies, a ferrocyanide copper (FC-Cu-EDA)-SAMMS was advanced for in vivo evaluation. In vivo experiments were conducted comparing the performance of the SAMMS vs. insoluble Prussian blue. Groups of jugular cannulated rats (4/treatment) were evaluated. Animals in Group I were administered (137)Cs chloride (approximately 40 microg kg(-1)) by intravenous (i.v.) injection or oral gavage; Group II animals were administered pre-bound (137)Cs-SAMMS or sequential Cs chloride + SAMMS (approximately 61 ng kg(-1)) by oral gavage; and Group III was orally administered (137)Cs chloride (approximately 61 ng kg(-1)) followed by either 0.1 g of SAMMS or Prussian blue. Following dosing, the rats were maintained in metabolism cages for 72 h and blood, urine, and fecal samples were collected for (137)Cs analysis (gamma counting). Rats were then humanely euthanized, and selected tissues analyzed. Orally administered (137)Cs chloride was rapidly and well absorbed (approximately 100% relative to i.v. dose), and the pharmacokinetics (blood, urine, feces, and tissues) were very comparable to the i.v. dose group. For both exposures the urine and feces accounted for 20 and 3% of the dose, respectively. The prebound (137)Cs-SAMMS was retained primarily within the feces (72% of the dose), with approximately 1.4% detected in the urine, suggesting that the (137)Cs remained tightly bound to SAMMS. SAMMS and Prussian blue both effectively captured available (137)Cs in the gut with feces accounting for 80-88% of the administered dose, while less than 2% was detected in the urine. This study suggests that the functionalized SAMMS outperforms Prussian blue in vitro at low pH, but demonstrates comparable in vivo sequestration efficacy at low exposure concentrations. The comparable response may be the result of the low (137)Cs chloride dose and high sorbent dosage that was utilized. Future studies are planned to optimize the performance of SAMMS in vivo over a broader range of doses and conditions.

Selective capture of cesium and thallium from natural waters and simulated wastes with copper ferrocyanide functionalized mesoporous silica.

Copper(II) ferrocyanide on mesoporous silica (FC-Cu-EDA-SAMMS) has been evaluated against iron(III) hexacyanoferrate(II) (insoluble Prussian Blue) for removing cesium (Cs(+)) and thallium (Tl(+)) from natural waters and simulated acidic and alkaline wastes. From pH 0.1-7.3, FC-Cu-EDA-SAMMS had greater affinities for Cs and Tl and was less affected by the solution pH, competing cations, and matrices. SAMMS also outperformed Prussian Blue in terms of adsorption capacities (e.g., 21.7 versus 2.6 mg Cs/g in acidic waste stimulant (pH 1.1), 28.3 versus 5.8 mg Tl/g in seawater), and rate (e.g., over 95 wt% of Cs was removed from seawater after 2 min with SAMMS, while only 75 wt% was removed with Prussian Blue). SAMMS also had higher stability (e.g., 2.5-13-fold less Fe dissolved from 2 to 24 h of contact time). In addition to environmental applications, SAMMS has great potential to be used as orally administered drug for limiting the absorption of radioactive Cs and toxic Tl in gastrointestinal tract.

Thiol-ene induced diphosphonic acid functionalization of superparamagnetic iron oxide nanoparticles.

Multifunctional organic molecules represent an interesting challenge for nanoparticle functionalization due to the potential for undesirable interactions between the substrate material and the variable functionalities, making it difficult to control the final orientation of the ligand. In the present study, UV-induced thiol-ene click chemistry has been utilized as a means of directed functionalization of bifunctional ligands on an iron oxide nanoparticle surface. Allyl diphosphonic acid ligand was covalently deposited on the surface of thiol-presenting iron oxide nanoparticles via the formation of a UV-induced thioether. This method of thiol-ene click chemistry offers a set of reaction conditions capable of controlling the ligand deposition and circumventing the natural affinity exhibited by the phosphonic acid moiety for the iron oxide surface. These claims are supported via a multimodal characterization platform which includes thermogravimetric analysis, X-ray photoelectron spectroscopy, and metal contact analysis and are consistent with a properly oriented, highly active ligand on the nanoparticle surface. These experiments suggest thiol-ene click chemistry as both a practical and generally applicable strategy for the directed deposition of multifunctional ligands on metal oxide nanoparticle surfaces.

High-performance, superparamagnetic, nanoparticle-based heavy metal sorbents for removal of contaminants from natural waters.

We describe the synthesis and characterization of high-performance, superparamagnetic, iron oxide nanoparticle-based, heavy metal sorbents, which demonstrate excellent affinity for the separation of heavy metals in contaminated water systems (i.e., spiked Columbia River water). The magnetic nanoparticle sorbents were prepared from an easy-to-synthesize iron oxide precursor, followed by a simple, one-step ligand exchange reaction to introduce an affinity ligand to the nanoparticle surface that is specific to a heavy metal or class of heavy metal contaminants. The engineered magnetic nanoparticle sorbents have inherently high active surface areas, allowing for increased binding capacities. To demonstrate the performance of the nanoparticle sorbents, river water was spiked with specific metals and exposed to low concentrations of the functionalized nanoparticles. In almost all cases, the nanoparticles were found to be superior to commercially available sorbent materials as well as the unfunctionalized iron oxide nanoparticles.