Strategically Designed Pd-Induced Changes in Alkaline Hydrogen Evolution Reaction and Oxygen Evolution Reaction Performances of Electrochemical Water Oxidation by the Galvanically Synthesized MoO2/MoO3 Composite Thin Film.

Electrochemical water oxidation is believed to be an effective pathway to produce clean, carbon-free, and environmentally sustainable green energy. In this work, we report a simple, easy-to-construct, facile, low-cost, and single-step galvanic technique to synthesize a Pd-supported temperature-assisted MoOx thin film nanocomposite for effective water oxidation. The most suitable nanocomposite exhibits very low overpotential at 10 mA/cm2 with smaller Tafel slope values for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) processes in an alkaline medium. The formation of a metal oxide-metal junction accelerates the growth of more active sites, promoting induced electronic synergism at the MoOx-Pd interface. This endows higher electrical conductivity and faster electron transfer kinetics, thus accelerating the faster water dissociation reaction following the Tafel-Volmer mechanism to boost the HER process in an alkaline medium. The excellent electrochemical HER and OER performances of our electrocatalyst even supersede the accomplishments of the benchmark catalysts Pt/C and RuO2. Moreover, neither of these two catalysts demonstrates both catalytic reactions, i.e., HER and OER at the same time, which have been observed for our synthesized catalyst. Our findings illustrate the potential of a thin-film MoOx-Pd nanocomposite to be an exceedingly effective electrocatalyst developed by interface engineering strategies. This also provides insight into designing several other semiconductor composite catalysts using simple synthesis techniques for highly efficient HER/OER processes that could be alternatives to benchmark electrocatalysts for water electrolysis.

ß-Bi2O3-Bi2WO6 Nanocomposite Ornated with meso-Tetraphenylporphyrin: Interfacial Electrochemistry and Photoresponsive Detection of Nanomolar Hexavalent Cr.

Hexavalent chromium exposure via inhalation, ingestion, or both has been proven to adversely affect internal organs, induce toxic effects, cause allergies, and contribute to the development of cancer. It requires a substantial and challenging effort to detect several heavy metal ions conveniently, sensitively, and reliably by using materials that are easy to synthesize and have a high yield. The impact of light on the electrocatalytic oxidation/reduction process proves an environmentally friendly methodology with numerous applications in pollution control. The extensive use of photoactive materials in photoelectrochemical (PEC) sensors necessitates the development of stable and highly effective photoactive materials. Hence, the solvothermal synthesis of the organic-inorganic hybrid nanocomposite ß-Bi2O3-Bi2WO6/H2TPP with varying weight percentages of meso-tetraphenylporphyrin (H2TPP) resulted in a selective electrode for electrocatalytic and photoelectrocatalytic reduction of Cr6+ on fluorine-doped tin oxide (FTO) by an adsorption-reduction mechanism. H2TPP increases the active site density and provides an effective surface area for efficient adsorption by providing both pyridinic- and pyrrolic-N atoms to ß-Bi2O3-Bi2WO6/H2TPP. H2TPP could effectively adsorb Cr6+ in the ß-Bi2O3-Bi2WO6/H2TPP composite system through electrostatic interaction, and the adsorbed Cr6+ ions were reduced to trivalent chromium Cr3+, resulting in promising Cr6+ sensing. The projected density of states and Bader charge calculations result in the electrostatic attraction among the N-2p orbital of H2TPP and the 3d and 4s orbitals of the Cr atom, resulting in the adsorption of the hexavalent Cr atom onto the active center of H2TPP. Moreover, the addition of H2TPP results in the development of a mesoporous surface that offers strong electrical conductivity, a substantial surface area, improved charge-mass transport, intimate contact between the electrolyte and catalyst, an extended fluorescence lifetime, and increased stability. The role of pH values was thoroughly investigated. All electrochemical and photoelectrochemical studies were carried out on 5 wt % H2TPP-ornated ß-Bi2O3-Bi2WO6. Nanocomposite ß-Bi2O3-Bi2WO6/5 wt % H2TPP demonstrated reliable cyclic stability, reproducibility, good sensitivity (8.005 µA mM cm-2), and a low limit of detection (LOD) (8.0 nM) toward photoelectrocatalytic reduction of Cr6+. The interference study in the presence of a few inorganic entities exhibited excellent selectivity. This tale amplification approach for developing a ß-Bi2O3-Bi2WO6/5 wt % H2TPP nanocomposite system suggests a deeper understanding of the application of photoelectrocatalytic reduction of Cr6+ in environmental remediation with real samples under light irradiation.

Strategic Synthesis of Heptacoordinated FeIII Bifunctional Complexes for Efficient Water Electrolysis.

In this research, highly efficient heterogeneous bifunctional (BF) electrocatalysts (ECs) have been strategically designed by Fe coordination (CR ) complexes, [Fe2 L2 (H2 O)2 Cl2 ] (C1) and [Fe2 L2 (H2 O)2 (SO4 )].2(CH4 O) (C2) where the high seven CR number synergistically modifies the electronic environment of the Fe centre for facilitation of H2 O electrolysis. The electronic status of Fe and its adjacent atomic sites have been further modified by the replacement of -Cl- in C1 by -SO4 2- in C2. Interestingly, compared to C1, the O-S-O bridged C2 reveals superior BF activity with extremely low overpotential (η) at 10 mA cm-2 (140 mVOER , 62 mVHER ) and small Tafel slope (120.9 mV dec-1 OER , 45.8 mV dec-1 HER ). Additionally, C2 also facilitates a high-performance alkaline H2 O electrolyzer with cell voltage of 1.54 V at 10 mA cm-2 and exhibits remarkable long-term stability. Thus, exploration of the intrinsic properties of metal-organic framework (MOF)-based ECs opens up a new approach to the rational design of a wide range of molecular catalysts.

Correction: Highly active spherical amorphous MoS2: facile synthesis and application in photocatalytic degradation of rose bengal dye and hydrogenation of nitroarenes.

[This corrects the article DOI: 10.1039/C5RA19442C.].

A Highly Sensitive Luminescent Upconversion Nanosensor for Turn-On Detection of As3.

A luminescent nanoprobe (NP), MnO2-modified Er3+/Yb3+-codoped Ag2MoO4 upconversion nanoparticles (UCNPs; cod-AMO-3/MnO2), was constructed for rapid, sensitive, and selective "turn-on" detection of trace As3+. Herein, two kinds of luminescent NPs were developed based on luminescence resonance energy transfer (LRET) between cod-AMO-3 as the energy donor and MnO2 as the energy acceptor. By using MnO2 as the matrix in cod-AMO-3/MnO2 fluorometric assay, the upconversion luminescence (UCL) intensity (IUCL) of the cod-AMO-3 probe was quenched significantly through LRET, illustrating MnO2 as an efficient quencher for UCL. With the addition of As3+, a stable bidentate binuclear (BB) corner-sharing bridged complex (As5+-MnO2) was probably formed, which alters the surface of the upconversion NP, leading to gradual separation between UCNPs and MnO2 and subsequent recovery of IUCL. Interestingly, it possessed superior sensitivity, reaction kinetics, and also high selectivity toward As3+ in aqueous solution. Our optimized cod-AMO-3/MnO2 nanocomposite (NComp) demonstrated a linear range of 0-150 ppb and an ultrasensitive detection limit of 0.028 ppb for As3+, which is extremely below the regulatory level, signifying the promising practical usage of this system. To the best of our knowledge, such a surface-modified Ln3+-codoped Ag-based nanosensor being applied for As3+ detection probably has not been reported yet, and it is rather unexplored. In a nutshell, the ability to monitor the As3+ concentration may enable the rational design of a convenient platform for a diverse range of environmental monitoring applications.

Tetraphenylporphyrin Decorated Bi2MoO6 Nanocomposite: Its Twin Affinity of Oxygen Reduction Reaction and Electrochemical Detection of 4-Nitrophenol.

A selective electrode for oxygen reduction reaction (ORR) and electrocatalytic reduction of 4-nitrophenol (p-NP) was fabricated on a glassy carbon electrode using organic-inorganic Bi2MoO6/H2TPP nanocomposites with different weight percentages of tetraphenylporphyrin, synthesized by the solvothermal process. Materials thus synthesized were characterized through UV-Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) analysis. The electrocatalytic performance of the modified electrode toward ORR in the 0.1 M KOH solution, the onset potential Eonset (0.942 V), E1/2 (0.704 V) vs RHE, Jd (-5.545 mA cm-2), and n = 4 physicochemical parameters were well appreciable. It exhibits good catalytic activity toward ORR through a four-electron pathway with excellent stability and high active site density, and thus, the in situ Porphy-decorated metal oxide system facilitates the electron transport process. High selectivity and efficacy for the oxygen reduction reaction (ORR) are a significant measure for several energy-converting applications. The decorated electrode, glassy carbon electrode (GCE)/Bi2MoO6/3 wt % Porphy, serves as an electrochemical sensor that exhibited good sensitivity (0.4683 µAµM-1 cm-2), good reproducibility, a low detection limit (0.0940 µM), and long-term stability in the aqueous phase without any appreciable effect in the presence of some common organic and inorganic interferences for the detection of p-NP in a linear concentration range of 0.5-350 µM. Therefore, the material performs as an effective electrode for both the ORR and the electrocatalytic reduction of p-NP with real matrix samples at room conditions.

One pot solvent assisted syntheses of Ag3SbS3 nanocrystals and exploring their phase dependent electrochemical behavior toward oxygen reduction reaction and visible light induced methanol oxidation reaction.

A huge variety of silver based ternary sulfide semiconductors (SCs) have been considered for the sustainable advancement of renewable energy sources. Herein, we have synthesized two important classes of newly emerging semiconductor nanocrystals (NCs) Ag3SbS3 (SAS), i.e. hexagonal and monoclinic by simply tuning the solvent polarity, of which the second one has been synthesized in a phase pure NC for the first time by the thermal decomposition of silver and antimony based dithiocarbamate (∼N-CS2-M) complexes. Interestingly, these two systems exhibit two different semiconducting (SC) properties and band gaps; hexagonal SAS has a p type (Eg ∼ 1.65 eV) whereas monoclinic SAS has an n type (Eg ∼ 2.1 eV) character. For the first time ever we have designed a reducing working electrode (i.e. cathode) by modifying the rotating disc electrode (RDE) with hexagonal SAS that exhibits excellent electrochemical oxygen reduction reaction (ORR) activity (Eonset = 1.09 V vs. RHE and average number of electron transfer: 3.89) comparable to that of the highly expensive Pt/C (Eonset = 0.88 V vs. RHE and average number of electron transfer: 3.92). Density functional theory (DFT) investigation confirms the corroborations of experimental data with theoretical implications. In addition, the electrode fabricated from monoclinic SAS acts as an efficient photoanode which exhibits higher photoelectrochemical (PEC) methanol oxidation reaction (MOR) activity under illumination in alkaline medium compared to that of standard TiO2 grown on an indium tin oxide (ITO) coated glass slide. On illumination, the relative photocurrent density at the onset potential has been obtained to be 845 which is a very significant experimental output with respect to any other TiO2 or Pt@TiO2 based photocatalysts for this application. The physicochemical stability and reusability of both materials were supported by 50 hours of extended electrochemical chronoamperometric measurements and powder XRD and the TEM analyses after electrocatalysis. This study explores a possible pathway for designing simple and less expensive but catalytically efficient silver based ternary sulfide NC systems for developing an SC material to reduce the energy crisis in the near future.

Advanced catalytic performance of amorphous MoS2 for degradation/reduction of organic pollutants in both individual and simultaneous fashion.

A cluster [(S2)2Mo(S2)2Mo(S2)2], has been used to synthesise molybdenum sulfide microparticles (MPs) by solvothermal treatments under inert environment. During synthesis, surfactants i.e. oleylamine and dodecanthiol take part in chief role in shaping the morphology of MPs into ultrathin nano-fibre, and nano-rod. MPs have been characterized by X-ray diffraction analysis, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis spectroscopic techniques. The optical spectral data reveals a simultaneous presence of direct and indirect band gap in both MoS2. The material emerges as an effective catalyst towards the mineralization of different cationic dyes (rhodamine B and methylene blue) and anionic dye (rosebngal). These MPs have also been effectively used for the simultaneous degradations of different dyes in the same reaction mixture which make further highlighted the catalytic performances of MoS2. The above kinetics of the decomposition processes were examined and found to follow the pseudo-first-order reaction model. The plausible mechanism has been explained by comparing the position of conduction band levels of MoS2 (measured by Mott-schotky and touc's plot) and potential value of borohydride. We have also investigated the active species behind the degradation of dyes by using different scavengers. The new catalyst was also effective for the degradation of mixture of dyes to the same extent as it was in case of individual.

Single source precursor driven phase selective synthesis of Au-CuGaS2 heteronanostructures: an observation of plasmon enhanced photocurrent efficiency.

The design of new functional metal-semiconductor heteronanostructures with improved photovoltaic efficiencies has drawn significant attention because of their unprecedented properties and potential applications. Herein, we report a phase selective synthesis of ternary CuGaS2 (wurtzite and tetragonal) by simple solution based thermal decomposition of a new binuclear single molecular precursor [Ga(acda)3Cu(PPh3)2]NO3 (acda = 2-aminocyclopentene-1-dithiocarboxylic acid, PPh3 = triphenylphosphine) where the phase selectivity has been achieved easily by changing the combination of surface active agents. Furthermore, we have extended our approach to develop a well-controlled synthetic strategy for the preparation of a Au-CuGaS2 heteronanocomposite with both the phases. A detailed microscopic study reveals that during heterostructure synthesis, an epitaxial junction has been formed at the interface of ternary CuGaS2 and metallic Au. To find out the influence of this epitaxial connectivity on the properties, we have studied the photocurrent and photoresponse behavior of the material and compared them with that of bare CuGaS2. For both the wurtzite and tetragonal phases, the Au-CuGaS2 twin structure exhibits a plasmon enhanced superior charge transport ability and an abruptly high photocurrent density compared to that of pure CuGaS2. Due to efficient charge separation by strong plasmon-exciton coupling at the interface, Au-CuGaS2 can be used as a potential candidate for photoelectrochemical applications.

Enhanced photocatalytic performance of morphologically tuned Bi2S3 NPs in the degradation of organic pollutants under visible light irradiation.

Here in, morphologically tuned Bi2S3 NPs were successfully synthesized from a single-source precursor complex [Bi(ACDA)3] [HACDA=2-aminocyclopentene-1-dithiocarboxylic acid] by decomposing in various solvents using a simple solvothermal method. The as-obtained products were characterized by XRD, TEM, UV-vis spectroscopy and BET surface area measurements. Structural analyses revealed that the as-prepared Bi2S3 NPs can be tuned to different morphologies by varying various solvents and surfactants. The interplay of factors that influenced the size and morphology of the nanomaterials has been studied. Moreover, mastery over the morphology of nanoparticles enables control of their properties and enhancement of their usefulness for a given application. These materials emerged as a highly active visible light-driven photocatalyst towards degradation of methylene blue dye and the efficiencies are dependent on size and surface area of the NPs. In addition, photocatalytic degradation of highly toxic dichlorodiphenyltrichloroethane was studied using synthesized Bi2S3 NPs as catalyst and the rate of degradation has been found to be much better compared to that exhibited by commercial WO3. We believe that this new synthesis approach can be extended to the synthesis of other metal sulfide nanostructures and open new opportunities for device applications.

Bis{[2,2'-(5,8,11-tri-thia-2,14-di-aza-penta-deca-1,14-diene-1,15-di-yl)diphenolato]palladium(II)} aceto-nitrile monosolvate.

The asymmetric unit of the title compound, [Pd(C22H26N2O2S3)]2·CH3CN, contains two complex mol-ecules and a single uncoordinated lattice aceto-nitrile solvent mol-ecule. The Pd(II) cations have a trans-N2O2 square-planar geometry and the superposition of the two crystallographically independent Pd(II) complexes yields an overall r.m.s. deviation of 0.292 Å. The Pd⋯Pd separation in the asymmetric unit is 3.3776 (3) Å, while the PdN2O2 plane-plane fold angle is 1.62 (7)°. A short inter-molecular S⋯S contact between the central S atom of one complex and its inversion-related symmetry equivalent of 3.663 (2) Šis observed. Part of the ligand chain (S-C-C-S) in each complex mol-ecule is disordered over two orientations and refined occupancies that converged to 0.450 (10) and 0.550 (10) for the one complex mol-ecule, and 0.789 (9) and 0.211 (9) for the other.

Electrocatalytic activity of silver nanoparticles modified glassy carbon electrode as amperometric sensor for hydrogen peroxide.

A simple chemical route has been applied for the preparation of quasi-spherical silver (Ag) nanoparticles (NPs) with average diameter of 265 and 8 nm. The as prepared products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis absorption spectroscopy. Ag NPs immobilized on glassy carbon (GC) electrode showed a superior electrocatalytic activity for the reduction of hydrogen peroxide (H2O2) in aqueous medium. The fabricated electrode was also applied for the amperometric detection of H2O2 and showed a favorable response at an applied potential of -0.5 V (vs. Ag/AgCl). The results demonstrate that the fabricated electrode has potential application for hydrogen peroxide sensor.

CuS nanoparticles as a mimic peroxidase for colorimetric estimation of human blood glucose level.

CuS nanoparticles (NPs) was synthesized through a simple and green method using water soluble precursor complex [CuL2(H2O)2]Cl2 (L=pyridine 2-carboxamide) and was characterized by X-ray diffraction analysis (XRD), transmission electron microscopy (TEM) and UV-Vis spectroscopic techniques. The as-prepared CuS NPs (covellite) was demonstrated to possess intrinsic peroxidase-like activity using 3,3',5,5'-tetramethylbenzidine (TMB), as a peroxidase substrate, in presence of H2O2 which show good affinity towards both TMB and H2O2. Using this TMB-H2O2 catalyzed color reaction; the CuS NPs was exploited as a new type of biosensor for detection and estimation of glucose through a simple, cheap and selective colorimetric method in a linear range from 2 to 1800 µM with a detection limit of 0.12 µM. On the basis of the developed reaction process, we can easily monitor human blood glucose level.

A novel amperometric biosensor for hydrogen peroxide and glucose based on cuprous sulfide nanoplates.

A facile, greener and template free route has been developed to produce cuprous sulfide (Cu2S) nanoplates (NPs) with average diameters of 70-150 nm, via one step solvothermal decomposition of a single-source precursor (SSP) Cu(ACDC)2 [ACDC = 2-aminocyclopentene-1-dithiocarboxylate] in the presence of ethylenediamine (EN) and triethylenetetramine (TETA) as structure orienting agents. The precursor complex and nanomaterials were thoroughly characterized by several common techniques and measurements, which give the composition and characteristics of the materials. Amperometric biosensors for hydrogen peroxide (H2O2) and glucose have been constructed by immobilizing the synthesized Cu2S NPs in glutaraldehyde on a glassy carbon (GC) electrode using a direct drop-coating method. The proposed sensor has displayed faster response, high and reproducible sensitivity (64.27 µA mM-1) with linear range of 10 µM to 3.75 mM, towards the electrochemical biosensing of H2O2 at -0.35 V (vs. Ag/AgCl). The sensor also showed high and reproducible sensitivity (61.67 µA mM-1) towards glucose determination with linear range of 10 µM to 3.1 mM. The anti-inference ability of electroactive molecules and favorable stability are some of the advantages of the proposed sensor. Finally, using the sensor we have determined the glucose concentration in a human blood serum sample. The results strongly demonstrate the usefulness of Cu2S NPs for biosensor design and other biological applications.

Synthesis of FeS and FeSe nanoparticles from a single source precursor: a study of their photocatalytic activity, peroxidase-like behavior, and electrochemical sensing of H2O2.

Nanocrystalline FeS and FeSe compounds were prepared by solvothermal decomposition of a precursor complex [Fe(3)(µ(3)-O)(µ(2)-O(2)CCH(2)Cl)(6)(H(2)O)(3)]NO(3)·H(2)O in the presence of thiourea and sodium selenite, respectively. The as-obtained products were characterized by X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and UV-vis spectroscopic techniques. Structural analyses revealed that the FeS and FeSe nanoparticles (NPs) are composed of needle-like and spherical particles, respectively. The FeS and FeSe NPs showed photocatalytic activity for the decomposition of rose bengal (RB) and methylene blue (MB) dyes under white light illumination. They also showed good catalytic activity toward oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H(2)O(2) and followed Michaelis-Menten kinetics. In addition, both FeS and FeSe NPs exhibited electrocatalytic activity toward reduction of hydrogen peroxide, which on immobilization on glassy carbon (GC) electrodes perform as amperometric sensors for detection of H(2)O(2). At pH 7.0, the FeS/GC showed a linear range for detection of H(2)O(2) from 5 to 140 µM, while for FeSe/GC the range was 5 to 100 µM.

Efficient proton-templated synthesis of 18- to 38-membered tetraimino(amino)diphenol macrocyclic ligands: structural features and spectroscopic properties.

A whole range of Robson-type tetraiminodiphenol macrocyclic ligands have been prepared as their perchlorate salts [H4L](ClO4)2 in high yield (ca. 90%) by a single-step [2 + 2] condensation reaction between 4-methyl(or tert-butyl)-2,6-diformyl(or diacyl)phenols and alpha,omega-diaminoalkanes (C2-C12) in the presence of acetic acid and NaClO4. The reduction of these 18- to 38-membered macrocyclic salts with NaBH4 have afforded corresponding tetraaminodiphenol macrocycles H2L'. The X-ray crystal structures of two of the tetraiminodiphenol macrocycles with the C2 and C4 lateral chains have been determined, and the optimized configurations for all of the macrocycles have been obtained by molecular mechanics calculations. The macrocycles have been characterized by elemental analysis and by IR, absorption, emission, and NMR spectroscopic study. The protonated tetraiminodiphenol macrocycles exhibit strong fluoroscence in methanol, acetonitrile, and nitromethane and undergo quenching when treated with triethylamine. The neutral macrocycles H2L, isolated by treating [H4L](ClO4)2 with excess of triethylamine, lack luminescence, as do the reduced tetraaminodiphenol macrocycles H2L'. The hydrolytic cleavage of [H4L](ClO4)2 has been studied.