Nanostructured manganese oxides electrode with ultra-long lifetime for electrochemical capacitors.

We describe the instantaneous fabrication of a highly porous three-dimensional (3D) nanostructured manganese oxides-reduced graphitic oxide (MnO x -rGO) electrode by using a pulse-photonic processing technique. Such nanostructures facilitate the movement of ions/electrons and offer an extremely high surface area for the electrode/electrolyte interaction. The electrochemical performance was investigated by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS) with 1 M KOH as the electrolyte. The as-prepared thin film electrode exhibits excellent electrochemical performance and an ultra-long lifetime by retaining 90% of the initial capacitance even after 100 000 GCD cycles at constant areal current density of 0.4 mA cm-2. We attribute this excellent lifetime performance to the conductive reduced graphitic oxide, synergistic effects of carbon composite and the metal oxides, and the unique porous nanostructure. Such highly porous morphology also enhances the structural stability of the electrode by buffering the volume changes during the redox processes.

Ultra-long cycle life and binder-free manganese-cobalt oxide supercapacitor electrodes through photonic nanostructuring.

We report a novel photonic processing technique as a next-generation cost-effective technique to instantaneously synthesize nanostructured manganese-cobalt mixed oxide reduced graphitic oxide (Mn-Co-rGO) for supercapacitor electrodes in energy storage applications. The active material was prepared directly on highly conductive Pt-Si substrate, eliminating the need for a binder. Surface morphological analysis showed that the as-prepared electrodes have a highly porous and resilient nanostructure that facilitates the ion/electron movement during faradaic redox reactions and buffers the volume changes during charge-discharge processes, leading to the improved structural integrity of the electrode. The presence of distinct redox peaks, due to faradaic redox reactions, at all scan rates in the cyclic voltammetry (CV) curves and non-linear nature of the charge-discharge curves suggest the pseudocapacitive charge storage mechanism of the electrode. The electrochemical stability and the life cycle were examined by carrying out galvanostatic charge-discharge (GCD) measurements at 0.40 mA cm-2 constant areal current density for 80 000 cycles, and the electrode showed 95% specific capacitance retention, exhibiting excellent electrochemical stability and an ultra-long cycle life. Such remarkable electrochemical performance could be attributed to the enhanced conductivity of the electrode, the synergistic effect of metal ions with rGO, and the highly porous morphology, which provides large specific surface area for electrode/electrolyte interaction and facilitates the ion transfer.

Pulsed photoinitiated fabrication of inkjet printed titanium dioxide/reduced graphene oxide nanocomposite thin films.

This work reports a new technique for scalable and low-temperature processing of nanostructured TiO2 thin films, allowing for practical manufacturing of TiO2-based devices such as perovskite solar cells at low-temperature or on flexible substrates. Dual layers of dense and mesoporous TiO2/graphitic oxide nanocomposite films are synthesized simultaneously using inkjet printing and pulsed photonic irradiation. Investigation of process parameters including precursor concentration (10-20 wt%) and exposure fluence (4.5-8.5 J cm-2) reveals control over crystalline quality, graphitic oxide phase, film thickness, dendrite density, and optical properties. Raman spectroscopy shows the E g peak, characteristic of anatase phase titania, increases in intensity with higher photonic irradiation fluence, suggesting increased crystallinity through higher fluence processing. Film thickness and dendrite density is shown to increase with precursor concentration in the printed ink. The dense base layer thickness was controlled between 20 and 80 nm. The refractive index of the films is determined by ellipsometry to be 1.92 ± 0.08 at 650 nm. Films exhibit an energy weighted optical transparency of 91.1%, in comparison to 91.3% of a thermally processed film, when in situ carbon materials were removed. Transmission and diffuse reflectance are used to determine optical band gaps of the films ranging from 2.98 to 3.38 eV in accordance with the photonic irradiation fluence and suggests tunability of TiO2 phase composition. The sheet resistance of the synthesized films is measured to be 14.54 ± 1.11 Ω/□ and 28.90 ± 2.24 Ω/□ for films as-processed and after carbon removal, respectively, which is comparable to high temperature processed TiO2 thin films. The studied electrical and optical properties of the light processed films show comparable results to traditionally processed TiO2 while offering the distinct advantages of scalable manufacturing, low-temperature processing, simultaneous bilayer fabrication, and in situ formation of removable carbon nanocomposites.

In Vitro/In Vivo Toxicity Evaluation and Quantification of Iron Oxide Nanoparticles.

Increasing biomedical applications of iron oxide nanoparticles (IONPs) in academic and commercial settings have alarmed the scientific community about the safety and assessment of toxicity profiles of IONPs. The great amount of diversity found in the cytotoxic measurements of IONPs points toward the necessity of careful characterization and quantification of IONPs. The present document discusses the major developments related to in vitro and in vivo toxicity assessment of IONPs and its relationship with the physicochemical parameters of IONPs. Major discussion is included on the current spectrophotometric and imaging based techniques used for quantifying, and studying the clearance and biodistribution of IONPs. Several invasive and non-invasive quantification techniques along with the pitfalls are discussed in detail. Finally, critical guidelines are provided to optimize the design of IONPs to minimize the toxicity.

Click-In Ferroelectric Nanoparticles for Dielectric Energy Storage.

Polymer-ceramic nanocomposites have been thoroughly investigated previously for high energy storage devices. However, the increase in performance of these nanocomposites has proven to be significantly lower than predicted values. Through surface functionalization of high dielectric constant nanoparticles (NP), the flaws that reduce composite performance can be eliminated to form high energy density composite materials. Functionalization methods utilize high throughput printing and curing techniques (i.e., inkjet printing and xenon flash lamp curing) that are crucial for rapid adoption into industrial production. (Ba,Ca) (Zr,Ti)O3 NPs (50 nm) are synthesized through the solvothermal method and functionalized with alkene terminated methoxysilanes. A thiol-ene monomer ink system, PTD3 [pentaerythritol tetrakis (3-mercaptopropionate) (PEMP, P), 1,3-Diisopropenylbenzene (DPB, D), 2,4,6-Triallyloxy-1,3,5-triazine (TOTZ, T)], is used as a high breakdown polymer matrix. Neat polymer, alkene terminated NP-polymer composites, and hydrophilic, TBAOH functionalized NP-polymer composites were spin coated onto both copper laminated glass slides and printed onto copper substrates in 1 cm(2) patterns for testing. Alkene functionalized NPs increased the breakdown strength by ∼38% compared to the nonfunctionalized NPs. Functionalized NPs increased both the breakdown strength and dielectric constant compared to the neat polymer, increasing the energy density nearly 3-fold from 13.3 to 36.1 J·cm(-3).

Particle placement and sheet topological control in the fabrication of Ag-hexaniobate nanocomposites.

Synthetic methods are demonstrated that allow for the fabrication of Ag-hexaniobate nanocomposites with directed nanoparticle (NP) placement and nanosheet morphological control. The solvothermal treatment of exfoliated nanosheets (NSs) in the presence of Ag NPs leads to a high yield of Ag nanocomposites. This approach is quite flexible and, with control of time and temperature, can be used to produce nanocomposites with specific architectures; Ag NPs can be attached to nanosheets, attached to the surfaces of nanoscrolls, or at higher temperatures, captured within nanoscrolls to form nanopeapod (NPP) structures. The decorated nanosheets and nanoscrolls show surface plasmon resonance (SPR) maxima similar to that of free Ag NPs, while the Ag NPPs exhibit a red shift of about 10 nm.

Peapod-type nanocomposites through the in situ growth of gold nanoparticles within preformed hexaniobate nanoscrolls.

A facile in situ method to grow Au nanoparticles (NPs) in hexaniobate nanoscrolls is applied to the formation of plasmonic Au@hexaniobate and bifunctional plasmonic-magnetic Au-Fe3 O4 @hexaniobate nanopeapods (NPPs). Utilizing a solvothermal treatment, rigid multiwalled hexaniobate nanoscrolls and partially filled Fe3 O4 @hexaniobate NPPs were first fabricated. These nanostructures were then used as templates for the controlled in situ growth of Au NPs. The resulting peapod structures exhibited high filling fractions and long-range uniformity. Optical measurements showed a progressive red shift in plasmonic behavior between Au NPs, Au NPPs, and Au-Fe3 O4 NPPs; magnetic studies found that the addition of gold in the Fe3 O4 @hexaniobate NPPs reduced interparticle coupling effects. The development of this approach allows for the routine bulk preparation of noble-metal-containing bifunctional nanopeapod materials.