A digital image smartphone-based approach to Slovak Tokaj wine authentication chemometric assisted.

The authentication of Slovak wines in comparison to other similar wines from various geographical regions, namely Hungary, France, Austria, and Ukraine, was conducted using the OC-PLS, DD-SIMCA, and PLS-DM models, all of them operating in rigorous way. The study involved 63 samples, of which 41 originated from Slovakia, covering diverse wine types such as varietal wines, cuvée selections (different "putnový"), and essence. To capture digital images under controlled conditions, a custom-made cardboard box with white inner surfaces was devised and equipped with a smartphone. During the training phase, sensitivities of 96%, 100%, and 96% were attained for OC-PLS, DD-SIMCA, and PLS-DM, respectively. In the subsequent stages of validation and testing for DD-SIMCA and PLS-DM, the proposed methods displayed optimal efficiency, achieving both sensitivity and specificity rates of 100%. However, such results were not achieved in the case of OC-PLS, which exhibited efficiency levels of 90% in validation and 80% in testing.

Region of interest selection in heterogeneous digital image: Wine age prediction by comprehensive two-dimensional gas chromatography.

This study integrates genetic algorithm (GA) with partial least squares regression (PLSR) and various variable selection methods to identify impactful regions of interest (ROI) in heterogeneous 2D chromatogram images for predicting wine age. As wine quality and aroma evolve over time, transitioning from youthful fruitiness to mature, complex flavors, which leads to alterations in the composition of essential aroma-contributing compounds. Chromatograms are segmented into subimages, and the GA-PLSR algorithm optimizes combinations based on grayscale, red-green-blue (RGB), and hue-saturation-value (HSV) histograms. The selected subimage histograms are further refined through interval selection, highlighting the compounds with the most significant influence on wine aging. Experimental validation involving 38 wine samples demonstrates the effectiveness of this approach. Cross-validation reduces the PLS model error from 2.8 to 2.4 years within a 10 × 10 subset, and during prediction, the error decreases from 2.5 to 2.3 years. The study presents a novel approach utilizing the selection of ROI for efficient processing of 2D chromatograms focusing on predicting wine age.

Extending the computational and experimental analysis of lipase active site selectivity.

Molecular docking is an important computational analysis widely used to predict the interaction of enzymes with several starting materials for developing new valuable products from several starting materials, including oils and fats. In the present study, molecular docking was used as an efficient in silico screening tool to select biocatalysts with the highest catalytic performance in butyl esters production in a solvent-free system, an eco-friendly approach, via direct esterification of free fatty acids from Licuri oil with butanol. For such purpose, three commercial lipase preparations were used to perform molecular docking studies such as Burkholderia cepacia (BCL), Porcine pancreatic (PPL), and Candida rugosa (CRL). Concurrently, the results obtained in BCL and CRL are the most efficient in the esterification process due to their higher preference for catalyzing the esterification of lauric acid, the main fatty acid found in the licuri oil composition. Meanwhile, PPL was the least efficient because it preferentially interacts with minor fatty acids. Molecular docking with the experimental results indicated the better performance in the synthesis of esters was BCL. In conclusion, experimental results analysis shows higher enzymatic productivity in esterification reactions of 1294.83 µmol/h.mg, while the CRL and PPL demonstrated the lowest performance (189.87 µmol / h.mg and 23.96 µmol / h.mg, respectively). Thus, molecular docking and experimental results indicate that BCL is a more efficient lipase to produce fatty acids and esters from licuri oil with a high content of lauric acid. In addition, this study also demonstrates the application of molecular docking as an important tool for lipase screening to achieve more sustainable production of butyl esters with a view synthesis of biolubricants.

Ad libitum ice slurry ingestion and half-marathon performance in a hot environment: A study comparing the effects of the amount and moment of ingestion between ice slurry and water at 37 °C.

Ice slurry ingestion during prolonged exercises may improve performance in hot environments; however, the ideal amount and timing of ingestion are still uncertain. We determined whether ad libitum ice slurry ingestion influences physiological and perceptual variables and half-marathon performance while comparing the effects of the amount and moment of ingestion between ice slurry and water at 37 °C. Ten trained participants (28 ± 2 years; mean and SD) were required to run two half marathons while consuming either ice slurry (-1 °C; Ad-1) or water (37 °C; 37 CE) ad libitum. They then performed two other half marathons where, during one, they were required to ingest an amount of water equivalent to the amount consumed during the Ad-1 trial (Pro37), and in the other, to ingest ice slurry in the amount consumed during the 37 CE trial (Pro-1). During the half marathons, dry-bulb temperature and relative humidity were controlled at 33.1 ± 0.3 °C and 60 ± 3%, respectively. Ad-1 ingestion (349.6 ± 58.5 g) was 45% less than 37 CE ingestion (635.5 ± 135.8 g). Physical performance, heart rate, perceived exertion, body temperatures, and thermal perception were not influenced by the temperature or amount of beverage ingestion. However, a secondary analysis suggested that lower beverage ingestion was associated with improved performance (Ad-1 + Pro37 vs. 37 CE + Pro-1: -4.0 min, Cohen's d = 0.39), with a significant relationship between lower beverage ingestion and faster running time (b = 0.02, t = 4.01, p < 0.001). In conclusion, ice slurry ingestion does not affect performance or physiological or perceptual variables during a half marathon in a hot environment. Preliminary evidence suggests that lower beverage ingestion (ice slurry or warm water) is associated with improved performance compared to higher ingestion.

Iodineminho Study: Iodine Supplementation and Prevalence of Iodine Deficiency in Pregnant Women.

CONTEXT: Iodine is necessary for the proper brain development. The prevalence of iodine deficiency in Portuguese pregnant women led the health authorities, in 2013, to recommend iodine supplementation for women in preconception, throughout pregnancy and during lactation. OBJECTIVE: To assess the impact of iodine supplementation initiated in the preconception or the first trimester of pregnancy on the prevalence of iodine deficiency and maternal thyroid status. METHODS: An observational prospective cohort study that follows thyroid function and iodine status of women recruited in preconception or in the first trimester of pregnancy. RESULTS: The median urinary iodine concentration (UIC) was significantly higher among women taking iodine supplements (no-supplement group UIC=63µg/L; supplement group UIC =100µg/L, p = 0.002) but still below the levels recommended by the World Health Organization. Only 15% of pregnant women had adequate iodine status and 17% showed UIC < 50 µg/l. There was no influence of whether iodine supplementation started in preconception or in the 1st trimester of gestation (UIC preconception group: 112µg/L vs UIC pregnancy group: 91µg/L, p = 0.569). In the 1st trimester of pregnancy, total thyroxine levels were lower and free triiodothyronine levels were higher in non-supplemented women. Thyroglobulin levels were lower in women who started iodine supplementation in preconception compared to non-supplemented women and women who started iodine supplementation during gestation. CONCLUSION: In the Minho region of Portugal, fertile women have insufficient iodine intake. Additional public health measures are needed since the current recommendations for iodine supplementation for pregnancy are unsatisfactory to achieve an adequate iodine status.

Second-order calibration high-resolution continuum source graphite furnace molecular absorption spectrometry-based determination of bromine and fluorine.

In this study, we report the simultaneous determination of bromine and fluorine using Second-Order Calibration High-Resolution Continuum Source Graphite Furnace Molecular Absorption Spectrometry (HR CS MAS). The instrumental data acquired correspond to the time versus wavelength matrix per sample that were analyzed using Parallel Factor Analysis (PARAFAC), along with Unfold and N-way Partial Least Squares combined with a post-calibration step known as Residual Bilinearization (U and N PLS/RBL). Despite the significant difference in sensitivity between bromine and fluorine, all approaches provided reasonably accurate results when predicting both analytes in synthetic mixtures within a controlled environment. The relative prediction error (REP) values for bromine were 29.8 % (PARAFAC), 23.6 % (N-PLS/RBL), and 13.1 % (U-PLS/RBL), while for fluorine, the REP values were 3.4 % (PARAFAC), 3.5 % (N-PLS/RBL), and 3.2 % (U-PLS/RBL). When applying this approach to predict unknown samples, a comparison was made between the estimated nominal concentrations of fluorine and bromine obtained using either a reference method or based on labeled values or spiked mass, and those obtained using the proposed method. It was observed that PARAFAC was unable to predict the samples accurately, whereas the REP values for the prediction of bromine and fluorine using N-PLS/RBL and U-PLS/RBL methods were 19.3 %/19.2 % and 13.6 %/13.1 %, respectively.

Kinetic and thermodynamic studies on the thermal inactivation of lipase immobilized on glutaraldehyde-activated rice husk silica.

The objective of this study was to obtain sufficient information on the thermal stabilization of a food-grade lipase from Thermomyces lanuginosus (TLL) using the immobilization technique. To do this, a new non-porous support was prepared via the sequential extraction of SiO2 from rice husks, followed by functionalization with (3-aminopropyl) triethoxysilane - 3-APTES (Amino-SiO2), and activation with glutaraldehyde - GA (GA-Amino-SiO2). We evaluated the influence of GA concentration, which varied from 0.25% v v-1 to 4% v v-1, on the immobilization parameters and enzyme thermal stabilization. The thermal inactivation parameters for both biocatalyst forms (soluble or immobilized TLL) were calculated by fitting a non-first-order enzyme inactivation kinetic model to the experimental data. According to the results, TLL was fully immobilized on the external support surface activated with different GA concentrations using an initial protein load of 5 mg g-1. A sharp decrease of hydrolytic activity was observed from 216.6 ± 12.4 U g-1 to 28.6 ± 0.9 U g-1 of after increasing the GA concentration from 0.25% v v-1 to 4.0% v v-1. The support that was prepared using a GA concentration at 0.5% v v-1 provided the highest stabilization of TLL - 31.6-times more stable than its soluble form at 60 °C. The estimations of the thermodynamic parameters, e.g., inactivation energy (Ed), enthalpy (ΔH#), entropy (ΔS#), and the Gibbs energy (ΔG#) values, confirmed the enzyme stabilization on the external support surface at temperatures ranging from 50 to 65 °C. These results show promising applications for this new heterogeneous biocatalyst in industrial processes given the high catalytic activity and thermal stability.

Predictive Simulations with OpenSim Moco to Investigate the Interaction Between Human and Assistive Exoskeleton.

The purpose of this work was to investigate the interaction between human and lower limbs assistive exoskeleton under different levels of assistance, by using computational simulations. To this, a human-exoskeleton interaction model was used and three predictive simulations were carried out with the OpenSim Moco. The results proved that the increase in the level of robot assistance causes a reduction in human effort. In addition, it was possible to verify the RMS torque of both the robot and the human, as well as the muscle activations, for the different levels of assistance simulated. For future work, we intend to run predictive simulations with more complex movements, such as gait free and with obstacles, in addition to using models that can represent a human being with muscle weakness on one side of the body (hemiparesis).

Prioritizing a research agenda on built environments and physical activity: a twin panel Delphi consensus process with researchers and knowledge users.

BACKGROUND: The growth of urban dwelling populations globally has led to rapid increases of research and policy initiatives addressing associations between the built environment and physical activity (PA). Given this rapid proliferation, it is important to identify priority areas and research questions for moving the field forward. The objective of this study was to identify and compare research priorities on the built environment and PA among researchers and knowledge users (e.g., policy makers, practitioners). METHODS: Between September 2022 and April 2023, a three-round, modified Delphi survey was conducted among two independent panels of international researchers (n = 38) and knowledge users (n = 23) to identify similarities and differences in perceived research priorities on the built environment and PA and generate twin 'top 10' lists of the most important research needs. RESULTS: From a broad range of self-identified issues, both panels ranked in common the most pressing research priorities including stronger study designs such as natural experiments, research that examines inequalities and inequities, establishing the cost effectiveness of interventions, safety and injuries related to engagement in active transportation (AT), and considerations for climate change and climate adaptation. Additional priorities identified by researchers included: implementation science, research that incorporates Indigenous perspectives, land-use policies, built environments that support active aging, and participatory research. Additional priorities identified by knowledge users included: built environments and PA among people living with disabilities and a need for national data on trip chaining, multi-modal travel, and non-work or school-related AT. CONCLUSIONS: Five common research priorities between the two groups emerged, including (1) to better understand causality, (2) interactions with the natural environment, (3) economic evaluations, (4) social disparities, and (5) preventable AT-related injuries. The findings may help set directions for future research, interdisciplinary and intersectoral collaborations, and funding opportunities.

Engineering the catalytic activity of an Antarctic PET-degrading enzyme by loop exchange.

Several hydrolases have been described to degrade polyethylene terephthalate (PET) at moderate temperatures ranging from 25°C to 40°C. These mesophilic PET hydrolases (PETases) are less efficient in degrading this plastic polymer than their thermophilic homologs and have, therefore, been the subject of many protein engineering campaigns. However, enhancing their enzymatic activity through rational design or directed evolution poses a formidable challenge due to the need for exploring a large number of mutations. Additionally, evaluating the improvements in both activity and stability requires screening numerous variants, either individually or using high-throughput screening methods. Here, we utilize instead the design of chimeras as a protein engineering strategy to increase the activity and stability of Mors1, an Antarctic PETase active at 25°C. First, we obtained the crystal structure of Mors1 at 1.6 Å resolution, which we used as a scaffold for structure- and sequence-based chimeric design. Then, we designed a Mors1 chimera via loop exchange of a highly divergent active site loop from the thermophilic leaf-branch compost cutinase (LCC) into the equivalent region in Mors1. After restitution of an active site disulfide bond into this chimera, the enzyme exhibited a shift in optimal temperature for activity to 45°C and an increase in fivefold in PET hydrolysis when compared with wild-type Mors1 at 25°C. Our results serve as a proof of concept of the utility of chimeric design to further improve the activity and stability of PETases active at moderate temperatures.

A non-target geographical origin screening of botrytized wines through comprehensive two-dimensional gas chromatography coupled with high-resolution mass spectrometry.

One of the most effective methods for gaining insight into the composition of trace-level volatile organic characteristics of wine products is through the use of a comprehensive two-dimensional gas chromatography-high resolution mass spectrometry (GC × GC-HRMS) technique. The vast amount of data generated by this method, however, can often be overwhelming requiring exhaustive and time-consuming analysis to identify significant statistical characteristics. The use of advanced chemometric software can achieve the same or even higher efficiency. This study aimed to identify differences based on geographical locations by analyzing the volatile organic compounds in the composition of botrytized wines from Slovakia, Hungary, France, and Austria. The volatile organic compounds were extracted by solid-phase microextraction and analyzed using GC × GC-HRMS. The data obtained from the analysis underwent Fisher-ratio (F-ratio) tile-based analysis to identify statistically significant differences. Principal component analysis demonstrated a significant distinction between wine samples based on geographical location, using only 10 statistically significant features with the highest F-ratio. In the samples, the following compounds were analyzed: methyl-octadecanoate, 2-cyanophenyl-ß-phenylpropionate, α-ionone, n-octanoic acid, 1,2-dihydro-1,1,6-trimethyl-naphthalene, methyl-hexadecanoate, ethyl-pentadecanoate, ethyl-decanoate, and γ-nonalactone. These, all play an important role in cluster pattern observed on principal component analysis results. Additionally, hierarchical cluster analysis confirmed this.

Iodine intake assessment in the staff of a Porto region university (Portugal): the iMC Salt trial.

PURPOSE: Iodine deficiency disorder (IDD) is an ongoing worldwide recognized problem with over two billion individuals having insufficient iodine intake. School-aged children and pregnant women are often target groups for epidemiological studies, but there is a lack of knowledge on the general adult population. The aim of this study was to assess the iodine status among a Portuguese public university staff as a proxy for the adult working population. METHODS: The population study covered 103 adults within the iMC Salt randomized clinical trial, aged 24-69 years. Urinary iodine concentration was measured spectrophotometrically using the Sandell-Kolthoff reaction. Iodine food intake was assessed using a 24-h dietary recall. The contribution of discretionary salt to the iodine daily intake was assessed through 24-h urinary sodium excretion (UIE) and potentiometric iodine determination of household salt. RESULTS: The mean urine volume in 24 h was 1.5 L. The median daily iodine intake estimated from 24-h UIE was 113 µg/day, being lower among women (p < 0.05). Only 22% of participants showed iodine intake above the WHO-recommended cutoff (150 µg/day). The median daily iodine intake estimated from the 24-h dietary recall was 58 µg/day (51 and 68 µg/day in women and men, respectively). Dairy, including yoghurt and milk products, were the primary dietary iodine source (55%). Iodine intake estimated from 24-h UIE and 24-h dietary recall was moderately correlated (Spearman rank correlation coefficient r = 0.34, p < 0.05). The average iodine concentration in household salt was 14 mg I/kg, with 45% of the samples below the minimum threshold preconized by WHO (15 mg I/kg). The contribution of discretionary salt to the daily iodine intake was around 38%. CONCLUSION: This study contributes new knowledge about iodine status in Portuguese working adults. The results revealed moderate iodine deficiency, particularly in women. Public health strategies and monitoring programs are needed to ensure iodine adequacy in all population groups.

Iodine Availability through Iodized Salt in Portugal: 2010-2021 Sales Evolution and Distribution.

Salt iodization programs are considered the most cost-effective measures to ensure adequate iodine intake in iodine-deficient populations. Portuguese women of childbearing age and pregnant women were reported to be iodine-deficient, which led the health authorities, in 2013, to issue a recommendation for iodine supplementation during preconception, pregnancy and lactation. In the same year, iodized salt became mandatory in school canteens. Of note, no regulation or specific programs targeting the general population, or the impact of iodized salt availability in retailers, are known. The present study analyzed iodized salt supermarket sales from 2010 to 2021 from a major retailer, identifying the proportion of iodized salt in total salt sales and its distribution in mainland Portugal. Data on iodine content were collected through the nutritional label information. Of a total of 33 salt products identified, 3 were iodized (9%). From 2010 to 2021, the weighted sales of iodized salt presented a growing tendency, reaching the maximum of 10.9% of total sales (coarse plus fine salt) in 2021. Iodized salt reached a maximum of 11.6% of total coarse salt in 2021, a maximum of 2.4% of the total fine salt in 2018. The overall sales of iodized salt and their contribution to iodine intake are extremely low, prompting additional studies to understand the consumer's choice and awareness of the benefits of iodized salt.

Process optimization for enzymatic production of a valuable biomass-based ester from levulinic acid.

The enzymatic production of isoamyl levulinate via esterification of isoamyl alcohol (IA) and levulinic acid (LA), a biomass-based platform chemical with attractive properties, in a solvent system has been performed in this study. For such a purpose, a low-cost liquid lipase (Eversa® Transform 2.0) immobilized by physical adsorption via hydrophobic interactions (mechanism of interfacial activation) on mesoporous poly(styrenene-divinylbenzene) (PSty-DVB) beads was used as heterogeneous biocatalyst. It was prepared at low ionic strength (5 mmol.L-1 buffer sodium acetate pH 5.0) and 25 â„ƒ using an initial protein loading of 40 mg.g-1 of support. Maximum protein loading of 31.2 ± 2.8 mg.g-1 of support and an immobilization yield of 83% was achieved. The influence of relevant factors (biocatalyst concentration and reaction temperature) on ester production was investigated using a central composite rotatable design (CCRD). Maximum acid conversion percentage of 65% was achieved after 12 h of reaction at 40 °C, 20% of mass of heterogeneous biocatalyst per mass of reaction mixture (20% m.m-1), and LA:IA molar ratio of 1:1.5 in a methyl isobutyl ketone (MIBK) medium. The biocatalyst retained around of 30% of its initial activity after five consecutive esterification batches under optimal experimental conditions. The proposed experimental procedure can be considered as an acceptable green process (EcoScale score of 66.5), in addition to the fact that a new strategy is proposed to sustainably produce a valuable industrial ester (isoamyl levulinate) from biomass-based materials using an immobilized and low-cost commercial lipase as catalyst.

Development and biological evaluation of nanoencapsulated-based pyrethroids with synergists for resistance management of two soybean pests: insights for new insecticide formulations.

BACKGROUND: Chemical control is commonly used against Euschistus heros (F.) and Chrysodeixis includens (Walker) in soybean fields in South America. However, previous studies reported that these pests have reduced susceptibility to pyrethroids in Brazil. On this basis, we developed and evaluated nanoencapsulated-based bifenthrin (BFT) and λ-cyhalothrin (LAM) with the synergists piperonyl butoxide (PBO) and diethyl maleate (DEM) for insect resistance management (IRM). RESULTS: Nanoformulations of BFT and LAM with PBO and DEM presented good physical-chemical characteristics and were stable. The spherical morphology of all systems and the encapsulation efficiency in nanostructured lipid carriers did not change when synergists were added. Nanoencapsulated BFT with DEM applied topically increased the susceptibility of E. heros to BFT by 3.50-fold. Similarly, nanoencapsulated BFT and LAM with PBO in diet-overlay bioassays increased the susceptibility of C. includens to both chemicals by up to 2.16-fold. Nanoencapsulated BFT and LAM with synergists also improve control efficacy of both species, causing higher mortality than commercial products containing these chemistries. CONCLUSIONS: It is possible to develop nanoencapsulated-based formulations of BFT and LAM with PBO or DEM, and these nanoformulations have the potential to improve control of E. heros and C. includens with recognized low susceptibility to pyrethroids. This study provides updates for designing new insecticide formulations for IRM. © 2022 Society of Chemical Industry.

Discrimination of whole grape juice using fluorescence spectroscopy data with linear discriminant analysis coupled to genetic and ant colony optimisation algorithms.

In this study, a new approach was developed for classifying grape juices produced in Brazil using unfolded excitation-emission matrix (EEM) fluorescence spectroscopy and chemometrics, with respect to the agricultural production system, namely the conventional or organic agricultural one. Linear discriminant analysis (LDA) coupled to ant colony optimisation (ACO) and the genetic algorithm (GA) were used to select a more effective subset of variables to discriminate grape juice samples. The best results demonstrated highly efficient classification of grape juice samples according to a conventional or organic production process with an accuracy rate of up to 97% for the models and 94% in the prediction of these classes for samples external to the model. The models showed high selectivity and sensitivity with a rate of up to 100% for the training and test datasets, in addition to determining the most significant variables that explain the separation of classes. The proposed method proves to be viable, as it is fast and requires minimal sample preparation, allowing quality control in the food industry.

Active warm-up and time-of-day effects on repeated-sprint performance and post-exercise recovery.

PURPOSE: This study investigated the effects of both an active warm-up and the time-of-day variation on repeated-sprint performance. A second objective was to compare the post-exercise recovery between the experimental conditions. METHODS: Eleven male participants performed ten maximal cycling sprints (6 s each, with a 30-s interval between them) in the morning and late afternoon, either after a warm-up or control condition. The warm-up consisted of cycling for 10 min at 50% of the peak aerobic power. RESULTS: Rest measurements of rectal, muscle, and skin temperatures were higher in the afternoon compared to the morning (p < 0.05), with no significant differences in heart rate (p = 0.079) and blood lactate concentration (p = 0.300). Warm-up increased muscle temperature, heart rate, and lactate, and reduced skin temperature (all p < 0.001), though no significant differences were observed for rectal temperature (p = 0.410). The number of revolutions (p = 0.034, ηp2 = 0.375), peak (p = 0.034, ηp2 = 0.375), and mean (p = 0.037, ηp2 = 0.365) power of the first sprint (not the average of ten sprints) were higher in the afternoon compared to the morning, regardless of warm-up. However, beneficial performance effects of warming up were evident for the first (p < 0.001) and the average of ten sprints (p < 0.05), regardless of time of day. More remarkable changes during the 60-min post-exercise were observed for rectal temperature (p = 0.005) and heart rate (p = 0.010) in the afternoon than in the morning. CONCLUSION: Warming-up and time-of-day effects in enhancing muscular power are independent. Although warm-up ensured further beneficial effects on performance than the time-of-day variation, a faster post-exercise recovery was observed in the late afternoon.

Enzymatic production of wax esters by esterification using lipase immobilized via physical adsorption on functionalized rice husk silica as biocatalyst.

The present study consists of developing an enzymatic process for the production of wax esters (lauryl stearate and cetyl stearate) by esterification in a heptane medium. Lipase from Thermomyces lanuginosus (TLL) immobilized via interfacial activation on silica particles from rice husks functionalized with triethoxy(octyl)silane (TLL-Octyl-SiO2 ) was used as biocatalyst. Maximum immobilized protein loading of around 22 mg g-1 (that corresponds to an immobilization yield of ≈55%) of support was observed using an initial protein loading of 40 mg g-1 of Octyl-SiO2 . Its hydrolytic activity (olive oil emulsion hydrolysis) was of 620 U g-1 of biocatalyst. The effect of certain factors on the cetyl estearate production was evaluated using a central composite rotatable design (CCDR). Under optimal conditions (64°C, 21% of mass of biocatalyst per volume of reaction mixture, 170 rpm, and stoichiometric acid:alcohol molar ratio 1 mol L-1 of each reactant), maximum acid conversion percentage of 91% was observed after 60 min of reaction. Lauryl stearate was also produced under such conditions, and an acid conversion of 93% after 60 min of reaction was also achieved. Free lipase exhibited acid conversion of only 15%-20% for both reaction mixtures. After nine successive esterification batches, TLL-Octyl-SiO2 retained 85%-90% of its original activity. These results show the promising use of the prepared biocatalyst in wax esters production due to its high catalytic activity and reusability.

Androgen and prolactin manipulation do not induce changes in immunocompetence measures in a fish with male parental care.

Prolactin and 11-ketotestosterone (11-KT) are important reproductive hormones in fishes, which may also influence immunocompetence. The immunocompetence handicap hypothesis states that higher androgen concentrations that support secondary sex traits are traded off against a decrease in immune system function. To test the relationships between these hormones and immunocompetence, we experimentally manipulated 11-ketotestosterone and prolactin in the freshwater fish, bluegill (Lepomis macrochirus) during parental care using implants that contained either 11-KT, prolactin, or an inert control. We vaccinated individuals to stimulate the acquired immune response, then measured immunocompetence as the number of granulocytes, lymphocytes and monocytes, and the expression of interleukin 8 in each sample. We did not observe any significant differences in the immune measures among the hormone treatments. Our results indicate that in bluegill, there is no trade-off between androgens or prolactin and immunocompetence.