Electrochemical Evaluation of Diketopyrrolopyrrole Derivatives for Nonaqueous Redox Flow Batteries.

Redox flow batteries (RFBs) employing nonaqueous electrolytes could potentially operate at much higher cell voltages, and therefore afford higher energy and power densities, than RFBs employing aqueous electrolytes. The development of such high-voltage nonaqueous RFBs requires anolytes that are electrochemically stable, especially in the presence of traces of oxygen and/or moisture. The inherent atmospheric reactivity of anolytes mandates judicious molecular design with high electron affinity and electrochemical stability. In this study, diketopyrrolopyrrole (DPP)-based TDPP-Hex-CN4 is proposed as a stable redox-active molecule for anolytes in nonaqueous organic RFBs. We demonstrate organic RFBs using TDPP-Hex-CN4 as anolyte with unisol blue (UB) 1,4-bis(isopropylamino)anthraquinone and 1,4-di-tert-butyl-2,5-bis(2-methoxyethoxy)benzene (DBBB) as catholytes. Cyclic voltammetry measurements with scans repeated over 200 cycles were performed to establish the electrochemical stability of the redox pairs. Symmetric flow-cell studies show that TDPP-Hex-CN4 exhibits stable capacity up to 700 cycles. Redox flow cells employing TDPP-Hex-CN4 /UB and TDPP-Hex-CN4 /DBBB as redox pairs demonstrate that DPP derivatives are propitious materials for anolytes in all organic nonaqueous RFBs.

Robust NaO2 Electrochemistry in Aprotic Na-O2 Batteries Employing Ethereal Electrolytes with a Protic Additive.

Aprotic metal-oxygen batteries, such as Li-O2 and Na-O2 batteries, are of topical research interest as high specific energy alternatives to state-of-the-art Li-ion batteries. In particular, Na-O2 batteries with NaO2 as the discharge product offer higher practical specific energy with better rechargeability and round-trip energy efficiency when compared to Li-O2 batteries. In this work, we show that the electrochemical deposition and dissolution of NaO2 in Na-O2 batteries is unperturbed by trace water impurities in Na-O2 battery electrolytes, which is desirable for practical battery applications. We find no evidence for the formation of other discharge products such as Na2O2·H2O. Furthermore, the electrochemical efficiency during charge remains near ideal in the presence of trace water in electrolytes. Although sodium anodes react with trace water leading to the formation of a high-impedance solid electrolyte interphase, the increase in discharge overpotential is only ∼100 mV when compared to cells employing nominally anhydrous electrolytes.

Facet-Independent Electric-Field-Induced Volume Metallization of Tungsten Trioxide Films.

Reversible metallization of band and Mott insulators by ionic-liquid gating is accompanied by significant structural changes. A change in conductivity of seven orders of magnitude at room temperature is found in epitaxial films of WO3 with an associated monoclinic-to-cubic structural reorganization. The migration of oxygen ions along open volume channels is the underlying mechanism.

Giant reversible, facet-dependent, structural changes in a correlated-electron insulator induced by ionic liquid gating.

The use of electric fields to alter the conductivity of correlated electron oxides is a powerful tool to probe their fundamental nature as well as for the possibility of developing novel electronic devices. Vanadium dioxide (VO2) is an archetypical correlated electron system that displays a temperature-controlled insulating to metal phase transition near room temperature. Recently, ionic liquid gating, which allows for very high electric fields, has been shown to induce a metallic state to low temperatures in the insulating phase of epitaxially grown thin films of VO2. Surprisingly, the entire film becomes electrically conducting. Here, we show, from in situ synchrotron X-ray diffraction and absorption experiments, that the whole film undergoes giant, structural changes on gating in which the lattice expands by up to ∼3% near room temperature, in contrast to the 10 times smaller (∼0.3%) contraction when the system is thermally metallized. Remarkably, these structural changes are fully reversible on reverse gating. Moreover, we find these structural changes and the concomitant metallization are highly dependent on the VO2 crystal facet, which we relate to the ease of electric-field-induced motion of oxygen ions along chains of edge-sharing VO6 octahedra that exist along the (rutile) c axis.

Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li-O2 batteries.

Given their high theoretical specific energy, lithium-oxygen batteries have received enormous attention as possible alternatives to current state-of-the-art rechargeable Li-ion batteries. However, the maximum discharge capacity in non-aqueous lithium-oxygen batteries is limited to a small fraction of its theoretical value due to the build-up of insulating lithium peroxide (Li2O2), the battery's primary discharge product. The discharge capacity can be increased if Li2O2 forms as large toroidal particles rather than as a thin conformal layer. Here, we show that trace amounts of electrolyte additives, such as H2O, enhance the formation of Li2O2 toroids and result in significant improvements in capacity. Our experimental observations and a growth model show that the solvating properties of the additives prompt a solution-based mechanism that is responsible for the growth of Li2O2 toroids. We present a general formalism describing an additive's tendency to trigger the solution process, providing a rational design route for electrolytes that afford larger lithium-oxygen battery capacities.

Distinct electronic structure of the electrolyte gate-induced conducting phase in vanadium dioxide revealed by high-energy photoelectron spectroscopy.

The development of new phases of matter at oxide interfaces and surfaces by extrinsic electric fields is of considerable significance both scientifically and technologically. Vanadium dioxide (VO2), a strongly correlated material, exhibits a temperature-driven metal-to-insulator transition, which is accompanied by a structural transformation from rutile (high-temperature metallic phase) to monoclinic (low-temperature insulator phase). Recently, it was discovered that a low-temperature conducting state emerges in VO2 thin films upon gating with a liquid electrolyte. Using photoemission spectroscopy measurements of the core and valence band states of electrolyte-gated VO2 thin films, we show that electronic features in the gate-induced conducting phase are distinct from those of the temperature-induced rutile metallic phase. Moreover, polarization-dependent measurements reveal that the V 3d orbital ordering, which is characteristic of the monoclinic insulating phase, is partially preserved in the gate-induced metallic phase, whereas the thermally induced metallic phase displays no such orbital ordering. Angle-dependent measurements show that the electronic structure of the gate-induced metallic phase persists to a depth of at least ∼40 Å, the escape depth of the high-energy photoexcited electrons used here. The distinct electronic structures of the gate-induced and thermally induced metallic phases in VO2 thin films reflect the distinct mechanisms by which these states originate. The electronic characteristics of the gate-induced metallic state are consistent with the formation of oxygen vacancies from electrolyte gating.

Crystal-facet-dependent metallization in electrolyte-gated rutile TiO2 single crystals.

The electric-field-induced metallization of insulating oxides is a powerful means of exploring and creating exotic electronic states. Here we show by the use of ionic liquid gating that two distinct facets of rutile TiO2, namely, (101) and (001), show clear evidence of metallization, with a disorder-induced metal-insulator transition at low temperatures, whereas two other facets, (110) and (100), show no substantial effects. This facet-dependent metallization can be correlated with the surface energy of the respective crystal facet and, thus, is consistent with oxygen vacancy formation and diffusion that results from the electric fields generated within the electric double layers at the ionic liquid/TiO2 interface. These effects take place at even relatively modest gate voltages.

Suppression of metal-insulator transition in VO2 by electric field-induced oxygen vacancy formation.

Electrolyte gating with ionic liquids is a powerful tool for inducing novel conducting phases in correlated insulators. An archetypal correlated material is vanadium dioxide (VO(2)), which is insulating only at temperatures below a characteristic phase transition temperature. We show that electrolyte gating of epitaxial thin films of VO(2) suppresses the metal-to-insulator transition and stabilizes the metallic phase to temperatures below 5 kelvin, even after the ionic liquid is completely removed. We found that electrolyte gating of VO(2) leads not to electrostatically induced carriers but instead to the electric field-induced creation of oxygen vacancies, with consequent migration of oxygen from the oxide film into the ionic liquid. This mechanism should be taken into account in the interpretation of ionic liquid gating experiments.