Removal of chromium from tannery industry wastewater using iron-based electrocoagulation process: experimental; kinetics; isotherm and economical studies.

Chromium is a hazardous compound from industrial processes, known for its toxicity, mutagenicity, teratogenicity, and carcinogenicity. Chemical methods are efficient but cost-effective alternatives with reduced sludge are sought. Electro-coagulation, utilizing low-cost iron plate electrodes, was explored for factual tannery wastewater treatment in this manuscript. Operating parameters such as initial chromium concentration, voltage, electrode number, operating time, agitation speed and current density has been studied to evaluate the treatment effeciency. Under optimal conditions (15 V, 0.4 mA/cm2, 200 rpm, 330 ppm chromium, 8 iron electrodes with a total surface area of 0.1188 m2, 3 h), chromium elimination was 98.76%. Iron anode consumption, power use, and operating cost were 0.99 gm/L, 0.0143 kW-h/L, and 160 EGP/kg of chromium eliminated, respectively. Kinetics studies were pursued first-order reaction (97.99% correlation), and Langmuir isotherms exhibited strong conformity (Langmuir R2: 99.99%). A predictive correlation for chromium elimination (R2: 97.97%) was developed via statistical regression. At HARBY TANNERY factory in Egypt, industrial sewage treatment achieved a final chromium disposal rate of 98.8% under optimized conditions.

An application of advanced oxidation process on industrial crude oily wastewater treatment.

Advanced oxidation process, via photo-catalytic oxidation process was demonstrated in this study as one of the promising techniques of simulated oily wastewater treatment. Several effective factors such as initial oil concentration, catalyst dose, stirring speed (rpm), pH value and hydrogen peroxide (H2O2) dose influencing on the photo-catalytic degradation rate of oily wastewater were investigated. The catalyst used in this work was titanium dioxide (TiO2). The solubility of oil in water was increased using emulsifier. Results indicated that the photo-catalytic oxidation process has a good removal percentage of oil from oily wastewater reached to 98.43% at optimum operating parameters of 1 g/L initial oil concentration, 850 rpm, 8 pH, 3 mL H2O2 and 1.5 g/L of TiO2 after 40 min of irradiation time. The degradation reaction follows a first order kinetics with a correlation coefficient (R2) of 93.7%. Ultimately, the application of photo-catalytic oxidation processes at these optimum operating parameters on an industrial oily wastewater collected from an effluent stream of Ras Shukair at Red See supplied by Asuit Petrochemical Company was done in Egypt. The results showed that the best oil removal (99%) was achieved after adding 3 mL of H2O2 in a reaction time of 40 min compared to without adding H2O2.

Intralesional zinc sulfate 2% vs intralesional vitamin D in plantar warts: A clinicodermoscopic study.

Verrucae are benign proliferations seen in skin due to infection with papillomaviruses. There are different treatment strategies for warts but all of these treatments are painful, time consuming, expensive, and recurrence is common. To evaluate and compare the efficacy of intralesional 2% zinc sulfate solution vs vitamin D3 in the treatment of plantar warts, as well as reporting the side effects. This three-armed randomized clinical trial included 105 patients presented with plantar warts divided into three groups, 35 patients per group. The first group received intralesional 2% zinc sulfate, the second group received intralesional 2% vitamin D3, and the third group received normal saline. Four sessions were done, one every 2 weeks. At the end of the study, patients showing complete response were more in zinc group (71.4%), vitamin D3 group (62.9%) compared to saline group (40%). Most of the patients in zinc group showed severe pain during injection (48.6%), most of the patients in vitamin D3 group showed mild pain (80%), while most of the patients in saline group showed no pain (57.1%). Both intralesional 2% zinc sulfate and vitamin D3 are effective in treatment of plantar warts, with zinc sulfate being more effective.

MHD Casson Fluid Flow over a Stretching Sheet with Entropy Generation Analysis and Hall Influence.

The impacts of entropy generation and Hall current on MHD Casson fluid over a stretching surface with velocity slip factor have been numerically analyzed. Numerical work for the governing equations is established by using a shooting method with a fourth-order Runge-Kutta integration scheme. The outcomes show that the entropy generation is enhanced with a magnetic parameter, Reynolds number and group parameter. Further, the reverse behavior is observed with the Hall parameter, Eckert number, Casson parameter and slip factor. Also, it is viewed that Bejan number reduces with a group parameter.