Perovskite Solar Cells: A Review of the Latest Advances in Materials, Fabrication Techniques, and Stability Enhancement Strategies.

Perovskite solar cells (PSCs) are gaining popularity due to their high efficiency and low-cost fabrication. In recent decades, noticeable research efforts have been devoted to improving the stability of these cells under ambient conditions. Moreover, researchers are exploring new materials and fabrication techniques to enhance the performance of PSCs under various environmental conditions. The mechanical stability of flexible PSCs is another area of research that has gained significant attention. The latest research also focuses on developing tin-based PSCs that can overcome the challenges associated with lead-based perovskites. This review article provides a comprehensive overview of the latest advances in materials, fabrication techniques, and stability enhancement strategies for PSCs. It discusses the recent progress in perovskite crystal structure engineering, device construction, and fabrication procedures that has led to significant improvements in the photo conversion efficiency of these solar devices. The article also highlights the challenges associated with PSCs such as their poor stability under ambient conditions and discusses various strategies employed to enhance their stability. These strategies include the use of novel materials for charge transport layers and encapsulation techniques to protect PSCs from moisture and oxygen. Finally, this article provides a critical assessment of the current state of the art in PSC research and discusses future prospects for this technology. This review concludes that PSCs have great potential as a low-cost alternative to conventional silicon-based solar cells but require further research to improve their stability under ambient conditions in view of their definitive commercialization.

Planar silver nanowire, carbon nanotube and PEDOT:PSS nanocomposite transparent electrodes.

Highly conductive, transparent and flexible planar electrodes were fabricated using interwoven silver nanowires and single-walled carbon nanotubes (AgNW:SWCNT) in a PEDOT:PSS matrix via an epoxy transfer method from a silicon template. The planar electrodes achieved a sheet resistance of 6.6 ± 0.0 Ω/□ and an average transmission of 86% between 400 and 800 nm. A high figure of merit of 367 Ω-1 is reported for the electrodes, which is much higher than that measured for indium tin oxide and reported for other AgNW composites. The AgNW:SWCNT:PEDOT:PSS electrode was used to fabricate low temperature (annealing free) devices demonstrating their potential to function with a range of organic semiconducting polymer:fullerene bulk heterojunction blend systems.

Highly conductive interwoven carbon nanotube and silver nanowire transparent electrodes.

Electrodes fabricated using commercially available silver nanowires (AgNWs) and single walled carbon nanotubes (SWCNTs) produced sheet resistances in the range 4-24 Ω â–¡-1 with specular transparencies up to 82 %. Increasing the aqueous dispersibility of SWCNTs decreased the bundle size present in the film resulting in improved SWCNT surface dispersion in the films without compromising transparency or sheet resistance. In addition to providing conduction pathways between the AgNW network, the SWCNTs also provide structural support, creating stable self-supporting films. Entanglement of the AgNWs and SWCNTs was demonstrated to occur in solution prior to deposition by monitoring the transverse plasmon resonance mode of the AgNWs during processing. The interwoven AgNW/SWCNT structures show potential for use in optoelectronic applications as transparent electrodes and as an ITO replacement.

New diarylmethanofullerene derivatives and their properties for organic thin-film solar cells.

A number of diarylmethanofullerene derivatives were synthesized. The cyclopropane ring of the derivatives has two aryl groups substituted with electron-withdrawing and -donating groups, the latter with long alkyl chains to improve solubility in organic solvents, an important property in processing cells. First reduction potentials of most derivatives were less negative than that of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which is possibly ascribed to their electron-withdrawing nature. Organic thin-film photovoltaic cells fabricated with poly(3-hexylthiophene) (P3HT) as the electron-donor and diarylmethanofullerene derivatives as the electron-acceptor material were examined. The {(methoxycarbonyl)phenyl[bis(octyloxy)phenyl]methano}fullerene showed power conversion efficiency as high as PCBM, but had higher solubility in a variety of organic solvents than PCBM. The V(oc) value was higher than that of PCBM, which is derived from the electron-donating (octyloxy)phenyl group, possibly raising the LUMO level. Photovoltaic effects of the devices fabricated with the derivatives having some electron-withdrawing groups were also examined.